Fail to set vlan in driver [F1ControlPlane::cmgrSscGetVlan]

Question

Hi,
I've a problem with a IPS module SSM-10 installed on a ASA5510 in Transparent mode, on the event viewer of IPS module i find this Error:
errorMessage: Error - Fail to set vlan in driver [F1ControlPlane::cmgrSscGetVlan]  name=errUnclassified
somebody can help me?
In attached the ASA and IPS config
Thanks

Answer 1

solved :
That message is due to cosmetic defect CSCtc89228. Its not of concern
problem-wise (its only cosmetic), and is usually produced when ASDM is
used to manage the sensor. A potential workaround is to ensure that a
nameif statement is added to the ASA Management interface (in the ASA
config):
http://www.cisco.com/en/US/docs/security/asa/asa80/command/reference/no.html#wp1747183
F1 Control Plane error message on SSM
Symptom:
AIP-SSM generates the following error:
evError: eventId=1258430054000390184 vendor=Cisco severity=error
originator:
hostId: HOSTID
appName: mainApp
appInstanceId: 426
time: Nov 17, 2009 15:06:52 UTC offset=-300 timeZone=GMT-05:00
errorMessage: Error - Fail to set vlan in driver [F1ControlPlane::cmgrSscGetVlan] name=errUnclassified
Conditions:
Seen in 7.0(2)E3.
Workaround:
No known workaround at this time.
Thanks