Failed Install of Captivate 5.0.2.630 Patch

I just tried to install the latest update for Cp5 announced this morning. This is the patch to upgrade Cp5 to 5.0.2.630.
However, the install fails with this error message:
On the off chance that maybe the install was failing because I was running a more recent version of Flash Player (10.3+)  I uninstalled that and tried again but got the same result.
If any of the Adobe Dev Techs are watching this thread, is there a workaround?

Hi Vish,
I'm on Win 7 Ultimate 64bit.
I eventually got the update to be accepted by Captivate but only after I had uninstalled the entire ELS 2.5 Trial suite and then done a repair install again of Captivate 5.
Yes I had installed some patches from the dev team but can't say which ones exactly.  In any case, it's all working fine now.

Similar Messages

  • Silent install for Captivate 4

    Hello,
    I have tried to use the KB 325175 and apply the same command
    line used in Captivate 3 to the new Captivate 4:
    setup.exe /s /v"/qn SERIALNUMBER=\"xxxxxxxxxxxxxxxxxxxxxxxx\"
    ALLUSERS=1 REBOOT=ReallySuppress"
    However, I got full user interface and it stopped on the
    screen asking me for the serial number. Is there a way to install
    Adobe Captivate 4 silently without any user interaction and what
    are the new command line switches?
    Thank you so much,
    Peter

    Hey there
    No need for apologies.
    We just like to keep the threads clean so that
    someone with an issue doesn't come looking and nobody is around to
    answer the question. They scan a few threads where others asked the
    same thing. But if most of the threads were just dangling threads
    asking the same question with no answer, they may grow frustrated
    and give up before finally finding the magickal thread where a
    reply that solved the issue was offered.
    Generally, most of the folks here are pretty good at picking
    up on a thread even if it's not really in what one may think is a
    proper category. Your issue may need to be sent to Adobe for an
    answer because Captivate 4 is so new. Maybe it's a bug we are
    seeing and it should work as it did in version 3. I dunno. Only
    Adobe can answer that.
    Perhaps try reporting it as an issue via the wish form?
    Click
    here to view the WishForm/Bug Reporting Form
    Cheers... Rick

  • When installing Adobe Captivate I get msg: unable to set-up control panel

    When installing Adobe Captivate I get msg: unable to set-up control panel..Does anyone know how to resolve?

    Hi,
    It seems that Captivate is not downloaded completely. Only one file is downloaded(i.e. .exe) , .7z file is missing.  You can follow the below instructions to download Captivate 7 via direct links.
    In order to download Adobe Captivate 7.0 Windows English, open the link mentioned below and sign in with your Adobe ID and password.
    https://www.adobe.com/cfusion/tdrc/index.cfm?product=captivate
    Once you sign In with your Adobe Id and password, you will be redirected to Adobe Captivate 7.0 download page, Do not click on download. Kindly stay on that page and paste the below two links on the Trail Page Address Bar  one by one and save the files on your system at same location:
    http://trials3.adobe.com/AdobeProducts/CPTV/7/win32/Captivate_7_LS21.7z
    http://trials3.adobe.com/AdobeProducts/CPTV/7/win32/Captivate_7_LS21.exe
    When both the files finish downloading, then run the second file (.exe) which will start extracting the first file (.7z) and will start installing Adobe Captivate 7.0 on your computer.
    Regards,
    Mayank

  • New install of Captivate 7 won't open

    I just installed Adobe Captivate 7 on my Mac. [8 gig of memory, Intel, OS X 10.9]
    It jumps as though it wants to start but doesn't. Any advice? I've rebooted after installing. Removed and reinstalled again. no go
    I used a CD. Maybe I should download a copy and try that?

    Hello,
    Good Afternoon !!
    You may download the CP7 patch from here : http://download.macromedia.com/pub/captivate/update/Captivate-7-0-1-Update_upd.dmg
    Note : Make sure Adobe Captivate 7 is not running while installing this patch.
    Thanks,
    Vikram

  • Current progress in fixing 10.4.6 failed install

    I'm now making some progress in understanding the failiure, however it's leaving me with some BIG questions as to the checks apple put in.
    This still hasn't fully worked for me! This is also an abbreviated account, please don't try unless your familiar with a shell prompt! Once I know what's going on better, I'll expand.
    I've so far done the following (appologies for any typos, I7m typing on a tiny pda keyboard).
    booted from dvd
    opened a terminal.
    noted chroot /Volumes/Macintosh\ HD/ /bin/bash seg faults
    created a dir fakesys at the root of the hd
    copied /var /bin /sbin and /usr from the dvd dir into fakesys
    made a tmp dir there
    copied the pkg dir for the upgrade which had been moved out of trash just before I rebooted to the fakesys dir as well as stuff like gunzip from /usr/bin on the hd.
    chrooted to fakesys running bash
    gunziped the Archive.pax.gz
    made a subdir, and from it pax -r -f ../Archives.pax
    backed up the /usr/lib from the hd (using tar cf - * | tar xf - - C <dest> to preserve links perms etc ... no man pages so couldn't look up the cp switches to do that! . Backed up kernel too
    did the same tar trick to install all updates from root
    noted a few files were a lot smaller, such as libMath something, libobjc and the kernel...
    tried chroot, diffferent error, about math lib. put in old,and chroot worked!
    rebooted... no joy... back to dvd, replace old kernel
    rebooted... (watching in verbose mode)... system got some way, than auto rebooted as per upgrade! (excitment rose!)
    as comming up again, lots of errors about libobjc.. booted from cd and replaced.
    tried again in verbose mode.
    looked good but then Firewall.app failed. after that I got lots of memberd couldn't find root users. Now on further reboots it panics with the kernel straight away.
    I'll keep on digging, and will update this thread as I discover more. I think the problem maybe the library files i had to roll back, as the dmesg command still seg faults in the chrooted environment

    Where did you obtain this? If the install failed,
    isn't it possible or even likely that the file was
    damaged at that point & the truncation is a result of
    that? I'm no expert, but the man page for pax says
    something about it only partially extracting files if
    one is terminated by errors. Additionally, there is a
    cryptic man entry under "bugs" about pax not
    recognizing multibyte characters, which may be a part
    of it.
    Also, in another thread, you mention terminal was
    open at the time of the install. Were you doing
    anything that could have caused the install to fail?
    Terminal was open (I normally have it open for ssh/scp to other machines), but wasn't running anything except bash.
    As I said, I obtained the file via Software Update, left it downloading to install then went to work. When I returned I had a message the install had failed, and the pkg was in the recycle bin. The machine would not run anything from this point, and even shutdown failed. Is it likely that a failed install would truncate the file? I really can't see why. Why would you write to an archive file in an install situation? Anyway, as I said, I can't say much on pax archives, but the archive was compressed. If you have a hard time understanding my confusion, try the following experiment. take a copy of one of your files, then do the following with a reasonable large file (split by default splits after 1000 lines):
    % gzip <file>
    % split <file>.gz
    % mv xaa xaa.gz
    % gunzip xaa.gz
    Split will create several files (slipting your compressed file). You'll see unziping a truncated file produces an error.
    Now it is quite possible that the install uses something like gzcat, which only produces errors at the end, such as "gzcat Archive.pax.gz | pax -r" the thing is, running gunzip Archive.pax.gz on the file SU downloaded produced no errors, so that's what confuses me. At any rate, it is best practice to checksum patch archives before running, and apple clearly don't do this, which is incredibly poor. I'm really not sure why there are a large number of people on this forum who find it so hard to believe that apple can do no wrong, and that every fault must be that of the user. Apple are not perfect, far from it. This is beginig to tire me. I found a solution when everyone else seemed to be saying use another mac, or re-install. I looked into what happened, and found the update the su had downloaded to be corrupt. I came up with a fix and shared. I think apple should look into this, and take feedback on several issues I've raised (and I'm sure others who found what I did would comment on too). If you want to insist it's not an apple problem, that's your perogative. I'd be the first to admit that I don't know much about macs (and didn't have much nice to say about them pre-osx), however, I do have a lot of experience with unix, and that's what I'm basing my comments on, and what I used to fix my mac.Anyway, enough ranting I need sleep.

  • Fresh Install of Captivate 7 will not Launch

    After a new install of Captivate 7 (with no errors) I try to launch the product.  A Sign In Required screen shows and before I can do anything an error message shows saying Adobe Captivate has stopped working.  I click close the program but the Sign In Required still shows.  Wether I try to Sign In or not nothing happens.
    I checked the event viewer and see 2 errors for Captivate. 1 says faulting module is AdobePSL.dll and the other says MSCVR100.dll
    Any ideas?
    I did try the copy all the fonts and then delete them and try launching CP7.
    Also I have a 64 bit version of Windows7 and have installed the 64 bit version of Captivate 7.
    Thanks!

    Hello,
    Welcome to Adobe Forums.
    Please send us your contact information on [email protected]
    Thanks,
    Vikram
    Adobe Support

  • Failed install drivers

    failed install drivers

    Would you care to expand your Posting by Asking a question, and giving specifics of what it is you did and what it is you want to do?
    Hope this helps

  • Java for Mac OS X 10.5 update 2 fails install

    So, I saw the news today. New Java update. Cool, I guess. Check for Software Updates, found Java update, downloaded, and failed install. So, I went and manually downloaded the new Java update and it does the same thing. When it fails installing, it says this: "The source media you are installing from is damaged. Try installing from a different copy of the source media or contact the manufacturer for replacement." Apple is gonna get me a new iMac because Java won't install? Sweet! In all seriousness though, what the deuce is going on? The only thing I have tried, aside from searching the boards for answers, is repairing permissions which didn't do anything. Help?

    They will replace the Java media, not your computer. But because you have downloaded the software there is no media to replace.
    Obviously your download is damaged. Try again. Be sure you do the following before downloading and trying to install:
    Repairing the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger and Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
    If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger, and 4.1 for Leopard) and/or TechTool Pro (4.6.1 for Leopard) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

  • How do I download and install Adobe Captivate 6 subscription?

    How do I download and install Adobe Captivate 6 subscription?

    Hi Jacob,
    You can buy a subscription for captivate from Adobe.com. Select the Subscription option when you add the product to your online cart. You are given a serial number at the end of your purchase. Just copy and paste the serial number when you launch your trial and follow the onscreen instructions to start using your subscription product.
    Please refer : http://www.adobe.com/uk/products/captivate/faq.html#subscription
    To download captivate please navigate to : http://www.adobe.com/cfusion/tdrc/index.cfm?product=captivate&loc=en_us

  • Failed install now won't ever install properly

    I attempted to install Firefox before, but the network security settings at the time never let me complete that install - it got stopped at the point where it had to reboot to finish.
    Now it is caught in an endless loop of wanting to restart Windows all the time, but never completes. The security settings were changed to allow me to install, but now when I download and restart the download, or even when I go to the programs menu and attempt to UNINSTALL the program, it just goes back to the damn popup about needing to restart to complete the original install!!! How in the hell do I get rid of the old one? The folder was deleted from the PROGRAM FILES, but STILL gives me this crap!

    Not really solved, but I figured out a work-around. I went to "custom" and installed it to a folder on my desktop, then moved it to my program files. However, I still have the rebooting link in my Start menu, and I can't uninstall the new one even -- goes back to the same garbage as above!
    There is obviously some remnant of the old, failed install in the system that is screwing with things, but I don't know where/what!

  • Can't find routing connectors as shell won't find exchange server after failed install

    I am trying to uninstall exchange 2010 after a failed install. When attempting to remove the Hub role I get an error that the computer is configured as a bridgehead server for 2 routing groups. I have seen how to find and remove them through the cmd shell,
    however, due to the failed install (and the other bridgehead having a huge raid failure and being bricked) I can't locate the connection through the exchange shell. Any ideas on how to delete this connection so I can uninstall 2010 in order to re-install it.

    Hi,
    Can you set the Exchange 2003 server as the bridge head then try uninstalling the Exchange 2010 server again.
    Thanks,
    Simon Wu
    TechNet Community Support

  • I am trying to install the Captivate 8 trial but when I go to save it I get a message saying "Insufficient disk space...

    I am trying to install the Captivate 8 trial but when I go to save it I get a message saying "Insufficient disk space, please check the minimum requirements and free up disk space to try again." But I have more than enough disk space! How do I fix this?

    Hello,
    Welcome to Adobe Forums.
    Please share your contact information on [email protected]
    Thanks,
    Vikram Gaur
    Adobe Support

  • Error installing KB3025390. Now cannot decline the patch.

    I am running SBS 2011 Windows 2008R2.
    Patch KB3025390 was pushed through by WSUS. When I tried to install the patch it failed. I then downloaded the patch from the Microsoft Download site and tried to install it. It failed again. Now I cannot decline the patch in SBS Console > Updates. It
    just shows up under errors.
    Does anyone know how I can either get this patch installed or declined?
    Thanks
    Howard

    Hi Howard,
    Based on your description, I understand that you failed to install the KB3025390 when it pushed via WSUS. Then
    directly download the update from Microsoft site and install again. However, still fail to install the update.
    Did you install any third-party application on the server? Please perform a
    clean boot and check if this issue still exist. Please also run
    SBS BPA tool and check if find relevant issues.
    Meanwhile, did you get any error message when failed to install this update? Please also check
    CBS and WindowsUpdate log files if find more clues.
    For WSUS, please refer to following article and repair WSUS, then check if can help you.
    Repair Windows Server Update Services
    If anything I misunderstand or any update, please don’t hesitate to let me know.
    Hope this helps.
    Best regards,
    Justin Gu
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • What to do with "Update is not applicable" error when install the InCopy 7.0.5.562 patch on window?

    Hi,
    I had InCopy 7.0.0.354 window version, and would like to upgrade to newer version.
    After install the InCopy 7.0.5.652 patch, there is this "Update is not applicable" error.
    The InDesign 7.0.5.652 patch installs (my old InDesign is 7.0.0.354) with no problem.
    I also tried to remove my InCopy 7.0.0, re-installed InCopy 7.0.0, but still the 7.0.5 patch has the same error.
    Now I have newer version of InDesign, but old version of InCopy, which can't be right for my work.
    Does anyone know how to fix it?
    I can only use the 7.0.5 patch.
    Thanks.

    Hi,
    I had InCopy 7.0.0.354 window version, and would like to upgrade to newer version.
    After install the InCopy 7.0.5.652 patch, there is this "Update is not applicable" error.
    The InDesign 7.0.5.652 patch installs (my old InDesign is 7.0.0.354) with no problem.
    I also tried to remove my InCopy 7.0.0, re-installed InCopy 7.0.0, but still the 7.0.5 patch has the same error.
    Now I have newer version of InDesign, but old version of InCopy, which can't be right for my work.
    Does anyone know how to fix it?
    I can only use the 7.0.5 patch.
    Thanks.

  • Experiencing Lots of Fails Installing CS 5.5 on Windows 8 / 64 Bit PC

    Details below. Any help is appreciated. Software is pretty much useless... it opens, but is very buggy.
    Exit Code: 6
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 6 error(s), 106 warning(s)
    WARNING: DS013: Payload {4355EE3F-2FDD-4EF4-83EA-2465FBF95B16} GermanSpeechAnalysisModels 1.0.0.0 is already installed and the session payload {01CABE2B-CE62-4924-8F8F-D9EF7491B23B} GermanSpeechAnalysisModels 2.5.0.0 has no upgrade/conflict relationship with it.
    WARNING: DS013: Payload {A8798E04-96FF-4564-9157-0D4C89CB794C} DynamiclinkSupport 5.0.0.0 is already installed and the session payload {1A1E5FF9-D0FD-42A3-8E18-E5E7E95E1AB4} DynamiclinkSupport 5.5.0.0 has no upgrade/conflict relationship with it.
    WARNING: DS013: Payload {234A555C-70F5-48FB-A7E2-32410EB5AF64} ItalianSpeechAnalysisModels 1.0.0.0 is already installed and the session payload {277DDEAC-D86F-404B-BC5F-AC5B3E073671} ItalianSpeechAnalysisModels 2.5.0.0 has no upgrade/conflict relationship with it.
    WARNING: DS013: Payload {D5CC77BE-BC5B-424E-8E45-DF60AFF7BE9C} Pixel Bender Toolkit 2.0.0.0 is already installed and the session payload {2EE4F060-CEE6-4002-AA8B-91B791541767} Pixel Bender Toolkit 2.6.0.0 has no upgrade/conflict relationship with it.
    WARNING: DS013: Payload {66173EC7-974E-4652-9468-4A93D2481BF0} CSXS Story Extension 1.0.0.0 is already installed and the session payload {3450d4c5-a82b-4428-a512-842ee1555a14} CSXS Story Extension 2.5.0.0 has no upgrade/conflict relationship with it.
    WARNING: DS013: Payload {36D02DA9-35F2-4686-A2FE-EF3014D2E226} SpanishSpeechAnalysisModels 1.0.0.0 is already installed and the session payload {3A95850D-2A0E-48FC-95C0-3F27B95DA7EC} SpanishSpeechAnalysisModels 2.5.0.0 has no upgrade/conflict relationship with it.
    WARNING: DS013: Payload {40F95A03-885A-45fb-9A14-486BEFEDDF34} Adobe Flash Player 10 Plugin 10.1.52.14 is already installed and the session payload {43A1C48E-3E50-410e-951C-E17A66BBF824} Adobe Flash Player 10 Plugin 10.0.0.0 has no upgrade/conflict relationship with it.
    WARNING: DS013: Payload {78A53622-CDBA-49D1-A3D0-D563FB398D0C} AdobeColorCommonSetRGB 3.0.0.0 is already installed and the session payload {45063C56-A2A2-4FD1-A56A-A964723EEE1E} AdobeColorCommonSetRGB 3.1.0.0 has no upgrade/conflict relationship with it.
    WARNING: DS013: Payload {39CB2E53-5326-4939-8B5A-0402C6EFBFE3} AdobeColorCommonSetCMYK 3.0.0.0 is already installed and the session payload {54D89F03-8EED-4FF9-BCDF-3B2E11D448A6} AdobeColorCommonSetCMYK 3.1.0.0 has no upgrade/conflict relationship with it.
    WARNING: DS013: Payload {7E5AA19B-0B85-4f44-BA26-728851489200} Adobe Flash Player 10 ActiveX 10.1.52.14 is already installed and the session payload {7202D4A7-F7E6-4e7a-B77D-7B1C4E8B5CA6} Adobe Flash Player 10 ActiveX 10.0.0.0 has no upgrade/conflict relationship with it.
    WARNING: DS013: Payload {3BF96AC2-0CA1-11DF-B07B-459956D89593} AdobeHelp 1.0.0.0 is already installed and the session payload {7EABC54B-02C3-4DA1-9EB4-974CE7414066} AdobeHelp 3.4.0.0 has no upgrade/conflict relationship with it.
    WARNING: DS013: Payload {0EDAD58E-71F3-4D0E-9D32-A205533FC0E9} KoreanSpeechAnalysisModels 1.0.0.0 is already installed and the session payload {85A65551-7D55-4AB5-83EB-2B352A0DDD08} KoreanSpeechAnalysisModels 2.5.0.0 has no upgrade/conflict relationship with it.
    WARNING: DS013: Payload {E7F2C606-8529-4028-B26E-8407DB43DD45} FrenchSpeechAnalysisModels 1.0.0.0 is already installed and the session payload {A92DAC1E-9F7C-46A3-BD06-8E629A5E1D07} FrenchSpeechAnalysisModels 2.5.0.0 has no upgrade/conflict relationship with it.
    WARNING: DS013: Payload {925ED7E4-E1B6-4544-8141-1C98A18D2E2E} AdobeOutputModule 3.0.0.0 is already installed and the session payload {AC003BC0-704F-4F02-A72E-AC8B7044DE24} AdobeOutputModule 3.1.0.0 has no upgrade/conflict relationship with it.
    WARNING: DS013: Payload {F46A4C18-2EAD-49F0-A244-994226F93B39} JapaneseSpeechAnalysisModels 1.0.0.0 is already installed and the session payload {C25C56B5-DF4B-4D25-B25F-9E7953648016} JapaneseSpeechAnalysisModels 2.5.0.0 has no upgrade/conflict relationship with it.
    WARNING: DS013: Payload {CD693E49-C5EF-4FA6-9037-9B636931C02B} AmericanEnglishSpeechAnalysisModels 1.0.0.0 is already installed and the session payload {CCB778B5-25B8-4E57-9F20-72B11B443EF9} AmericanEnglishSpeechAnalysisModels 2.5.0.0 has no upgrade/conflict relationship with it.
    WARNING: DS013: Payload {A1E0C87F-BFE5-490A-898E-05BD4DD2BADF} InternationalEnglishSpeechAnalysisModels 1.0.0.0 is already installed and the session payload {F3AEA2B8-DC79-470F-9D16-A4E9CF2F8810} InternationalEnglishSpeechAnalysisModels 2.5.0.0 has no upgrade/conflict relationship with it.
    ERROR: DS013: Verifying payload integrity : Failed with code 1
    WARNING: DW066: OS requirements not met for {0D96CFE6-376D-44B8-808A-16F3BEB73263}
    WARNING: DW066: OS requirements not met for {7202D4A7-F7E6-4e7a-B77D-7B1C4E8B5CA6}
    WARNING: DW066: OS requirements not met for {43A1C48E-3E50-410e-951C-E17A66BBF824}
    WARNING: DW066: OS requirements not met for {3450d4c5-a82b-4428-a512-842ee1555a14}
    WARNING: DW066: OS requirements not met for {11C0657F-2BD4-4CBC-87F3-9455DC91886E}
    WARNING: DW066: OS requirements not met for {8F366029-8F3C-4400-BB65-7BFD1A58F200}
    WARNING: DW066: OS requirements not met for {B55FDCCB-8A45-4943-8D90-585C3490A032}
    WARNING: DW066: OS requirements not met for {4603E0C5-6880-4A4F-BCF8-DF1F6AE0E317}
    WARNING: DW066: OS requirements not met for {EB186BF2-0A84-40A2-B794-0326D3DF9973}
    WARNING: DW066: OS requirements not met for {0669F23C-1B69-41B4-A3ED-4F54A5986D66}
    WARNING: DW066: OS requirements not met for {6BC81374-1E33-4495-93E2-DD2B10D358EE}
    WARNING: DW066: OS requirements not met for {067E43CD-3E9C-44BA-89FA-EDE7461BC22B}
    WARNING: DW066: OS requirements not met for {C1302004-7A3C-467A-80AC-4D0C9F6982C1}
    WARNING: DW066: OS requirements not met for {7CAD45EF-24AD-4281-9236-7F8DDB0B9538}
    WARNING: DW066: OS requirements not met for {61D7BE95-B5C3-4257-A773-64596D72E848}
    WARNING: DW066: OS requirements not met for {C2F8BD34-1692-40F9-BA1B-1CFB2B5FED3A}
    WARNING: DW066: OS requirements not met for {00AEBAF2-D950-467B-BD24-449BCA2A4424}
    WARNING: DW066: OS requirements not met for {FF5837B9-6F4D-1014-B2FA-C016F4A584FA}
    WARNING: DW066: OS requirements not met for {F37EA9EC-638F-4E61-BED4-BDB10461D73B}
    WARNING: DW066: OS requirements not met for {F194231A-13B9-45B9-9699-1B9AC6500263}
    WARNING: DW066: OS requirements not met for {7745F18B-FD8A-4011-BE16-588900C503D0}
    WARNING: DW066: OS requirements not met for {32C78855-194D-4E66-9EB5-D6DC1C418D79}
    WARNING: DW066: OS requirements not met for {89823DB1-05CA-1016-BA4A-BE6A29E42461}
    WARNING: DW066: OS requirements not met for {7CF76BDA-73EA-4C46-A59D-FC3142D83E65}
    WARNING: DW066: OS requirements not met for {B0D32525-8AFA-43C4-B84D-AB2A844D5EAD}
    WARNING: DW066: OS requirements not met for {0A186736-9C62-48B2-B1DF-8A9C5CF7C997}
    WARNING: DW066: OS requirements not met for {4C08199E-0D93-4227-8325-F024E71CA7A1}
    WARNING: DW066: OS requirements not met for {BD3F3C6B-5F98-109B-A0CA-B0FAE4A7D983}
    WARNING: DW066: OS requirements not met for {301D39AF-43B1-445B-88CF-D78584200322}
    WARNING: DW066: OS requirements not met for {CC35904A-0197-4F06-BD70-9CE3DB24DBFD}
    WARNING: DW066: OS requirements not met for {4B51E596-6BB0-4244-9AB9-344AD5FA6726}
    WARNING: DW066: OS requirements not met for {CCB778B5-25B8-4E57-9F20-72B11B443EF9}
    WARNING: DW066: OS requirements not met for {07C64F28-6F4E-1014-A82C-D40EE8D79912}
    WARNING: DW066: OS requirements not met for {260BF844-6F4D-1014-A611-DFCB82217C38}
    WARNING: DW066: OS requirements not met for {47CE893F-A0FF-4094-AA16-5209AEA7C7E0}
    WARNING: DW066: OS requirements not met for {A92DAC1E-9F7C-46A3-BD06-8E629A5E1D07}
    WARNING: DW066: OS requirements not met for {01CABE2B-CE62-4924-8F8F-D9EF7491B23B}
    WARNING: DW066: OS requirements not met for {208DE3D5-541C-41B0-8595-7A608A6E4306}
    WARNING: DW066: OS requirements not met for {F3AEA2B8-DC79-470F-9D16-A4E9CF2F8810}
    WARNING: DW066: OS requirements not met for {277DDEAC-D86F-404B-BC5F-AC5B3E073671}
    WARNING: DW066: OS requirements not met for {C25C56B5-DF4B-4D25-B25F-9E7953648016}
    WARNING: DW066: OS requirements not met for {85A65551-7D55-4AB5-83EB-2B352A0DDD08}
    WARNING: DW066: OS requirements not met for {4A4F91EA-5951-4C5C-B911-027D802817EB}
    WARNING: DW066: OS requirements not met for {3A95850D-2A0E-48FC-95C0-3F27B95DA7EC}
    WARNING: DW066: OS requirements not met for {4883A813-2805-4FA8-A91C-073BA7B2667A}
    WARNING: DW066: OS requirements not met for {9F16123E-05FC-1016-91BC-C090234C0EE3}
    WARNING: DW066: OS requirements not met for {AC76BA86-1033-F400-7760-000000000005}
    WARNING: DW066: OS requirements not met for {606A0AC5-5F90-4379-81AE-11B44707E094}
    WARNING: DW066: OS requirements not met for {3EE734CB-F7AD-4691-9712-066E9FEC3E62}
    WARNING: DW066: OS requirements not met for {B7091600-995D-44EC-9B67-0E2025FDA600}
    WARNING: DW066: OS requirements not met for {D5B1535A-FDFC-4B40-B2E2-21DA83D9CB57}
    WARNING: DW066: OS requirements not met for {AD60EB24-4CEE-4CA0-A6AA-526EAF41F2DB}
    WARNING: DW066: OS requirements not met for {650C9D09-D5BD-4532-8BEE-01DBC1DF5537}
    WARNING: DW066: OS requirements not met for {D8D2B468-8342-411A-8760-BCC362C3408F}
    WARNING: DW066: OS requirements not met for {5D2A85AB-7391-4EAC-AA61-D5D9C09E4F17}
    WARNING: DW066: OS requirements not met for {3D51982E-45C6-4B4B-9362-B356E1610821}
    WARNING: DW066: OS requirements not met for {0215A652-E081-4B09-9333-DC85AAB67FFA}
    WARNING: DW066: OS requirements not met for {35ED8892-98E5-488A-A23C-6DB842A46EA5}
    WARNING: DW066: OS requirements not met for {DD309051-FACF-4A5E-87F1-C57154BB3DE8}
    WARNING: DW066: OS requirements not met for {B32795C5-827C-4184-9A36-FF23AB3CDA30}
    WARNING: DW066: OS requirements not met for {D8CCCF4C-C227-427C-B4BE-736657D2AB7E}
    WARNING: DW066: OS requirements not met for {8DADF070-FE60-4899-8EF0-4242E7702F7D}
    WARNING: DW066: OS requirements not met for {1C9D6B02-8B92-4E40-8B22-37D8C95430F0}
    WARNING: DW066: OS requirements not met for {273F6D81-E280-4B31-90E7-8B337DB641CF}
    WARNING: DW066: OS requirements not met for {BF093B6B-F94F-4D77-99C9-4C0F6B2F44B6}
    WARNING: DW066: OS requirements not met for {23767F5D-A80C-4264-B8EA-ED4085FC332A}
    WARNING: DW066: OS requirements not met for {DDBDE7B0-6FC4-40B1-B673-66EEE8CB60CF}
    WARNING: DW066: OS requirements not met for {C0329E33-DEB4-48D9-B7B6-19493A6F062E}
    WARNING: DW066: OS requirements not met for {C61B093E-259E-45D8-B9B6-24630A700398}
    WARNING: DW066: OS requirements not met for {08EF22BC-43B2-4B4E-BA12-52B18F418F38}
    WARNING: DW066: OS requirements not met for {EDE888ED-3BD7-4D8C-AB35-7E4C661A94D9}
    WARNING: DW066: OS requirements not met for {10355145-8A4C-47F3-994B-B9B81B4DABF5}
    WARNING: DW066: OS requirements not met for {F9F276DA-9EC6-492C-AF58-F27C5EC19D66}
    WARNING: DW066: OS requirements not met for {D97AF04B-B70A-4862-BC25-31E6D9C4A529}
    WARNING: DW066: OS requirements not met for {E348E466-429A-4FB0-AFCF-8306C16BBFF1}
    WARNING: DW066: OS requirements not met for {2EA9B52E-8613-41A0-9EEF-FF54AD4CC810}
    WARNING: DW066: OS requirements not met for {970C9F3A-39C5-480B-BE51-7C70AB9F84DB}
    WARNING: DW066: OS requirements not met for {857CC5F0-040E-1016-A173-D55ADD80C260}
    WARNING: DW066: OS requirements not met for {50509A36-0291-1016-9CCF-FC05E9E55550}
    WARNING: DW066: OS requirements not met for {B98CCEE8-0217-1016-B5BF-F06B878DAC9A}
    WARNING: DW066: OS requirements not met for {EFB5A1C3-ECCA-4D8A-B598-81D21DE25C34}
    WARNING: DW066: OS requirements not met for {FE35B66A-C8F1-4D62-B823-C2EE2C7DA702}
    ----------- Payload: {2EE4F060-CEE6-4002-AA8B-91B791541767} Pixel Bender Toolkit 2.6.0.0 -----------
    WARNING: DF035: CreateAlias:Icon file does not exist at C:\Program Files (x86)\Adobe\Adobe Utilities - CS5.5\Pixel Bender Toolkit 2.6\windows\pb_app.icofile:\\\C:\PIXELB~1\source\winwood\Staging    0X1.BE848FP-1013rea\windows\pb_app.ico42178f80493091e8e552c84a2897e9da68fce32_32_f8049309 1e8e552c84a2897e9da68fce for icon C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Adobe Master Collection CS5.5\Adobe Pixel Bender Toolkit 2.6.lnk with target C:\Program Files (x86)\Adobe\Adobe Utilities - CS5.5\Pixel Bender Toolkit 2.6\Pixel Bender Toolkit.exe(Seq 89)
    ----------- Payload: {7202D4A7-F7E6-4e7a-B77D-7B1C4E8B5CA6} Adobe Flash Player 10 ActiveX 10.0.0.0 -----------
    ERROR: Error 1722.There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Action NewCustomAction1, location: C:\Users\JinxyKat\AppData\Local\Temp\InstallAX.exe, command: -install activex -msi
    ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
    MSI Error message: Error 1722.There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Action NewCustomAction1, location: C:\Users\JinxyKat\AppData\Local\Temp\InstallAX.exe, command: -install activex -msi
    ----------- Payload: {47CE893F-A0FF-4094-AA16-5209AEA7C7E0} Firefox Plugin CS5.1 6.1.0.0 -----------
    WARNING: DF012: File/Folder does not exist at J:\Adobe CS5_5\payloads\AdobeContribute6.1-FFPlugin\OEM(Seq 32)
    ----------- Payload: {208DE3D5-541C-41B0-8595-7A608A6E4306} IE Plugin CS5.1 6.1.0.0 -----------
    WARNING: DF012: File/Folder does not exist at J:\Adobe CS5_5\payloads\AdobeContribute6.1-IEPlugin\OEM(Seq 26)
    ----------- Payload: {4A4F91EA-5951-4C5C-B911-027D802817EB} Office Plugin CS5.1 6.1.0.0 -----------
    WARNING: DF012: File/Folder does not exist at J:\Adobe CS5_5\payloads\AdobeContribute6.1-OfficePlugin\OEM(Seq 34)
    ----------- Payload: {DD309051-FACF-4A5E-87F1-C57154BB3DE8} Adobe Contribute CS5.1 6.1.0.0 -----------
    WARNING: DF012: File/Folder does not exist at J:\Adobe CS5_5\payloads\AdobeContribute6.1-mul\OEM(Seq 8283)
    ----------- Payload: {8DADF070-FE60-4899-8EF0-4242E7702F7D} Adobe Fireworks CS5.1 11.1.0.0 -----------
    WARNING: DF012: File/Folder does not exist at J:\Adobe CS5_5\payloads\AdobeFireworks11.1.0All\OEM(Seq 1215)
    ----------- Payload: {1C9D6B02-8B92-4E40-8B22-37D8C95430F0} Adobe Fireworks CS5.1_AdobeFireworks11.1.0en_USLanguagePack 11.1.0.0 -----------
    WARNING: DF012: File/Folder does not exist at J:\Adobe CS5_5\payloads\AdobeFireworks11.1.0en_USLanguagePack\OEM(Seq 74)
    ----------- Payload: {D97AF04B-B70A-4862-BC25-31E6D9C4A529} Adobe Flash CS5.5 11.5.0.0 -----------
    ERROR: DR012: Setting Registry Value Failed. Error 5 Access is denied.(Seq 154)
    ERROR: DW050: The following payload errors were found during install:
    ERROR: DW050:  - Adobe Flash Player 10 ActiveX: Install failed

    Hi there
    Is this for the CS5 product suite or for the Adobe Captivate 5 application? If the former, you are seeking help in the wrong area as this forum is dedicated to Captivate.
    If that's the case, try clicking the link below and choosing a forum that more closely matches your product.
    Click here to view
    Cheers... Rick

Maybe you are looking for

  • How do I obtain a credit card receipt from Adobe for an auto renewal?

    My account auto renewed and charged my corporate credit card.  Is there a way to obtain a receipt for the charge from Adobe?

  • JNI Versus MQ Series

    For one of our projects I am given a task of integrating with EJB for data access from a C++ client. Since I couldnt use corba i have two options available JNI / IBM MQ. Since I am new to the Java world I hoping you gurus could solve my dilemma with

  • Inspection Lots in QM

    Hi All, Please try to address this Is there any way to delete the "Inspection Lots" which have been created? If so, how? My requirment is as follows Requirement - Delete all the inspection lots created for a particular plant. It has thousands of inps

  • Drill down to detail reports from a Pie Chart

    Is it possible to code for drill downs in a Pie Chart to a detail report based on the section that is clicked in an RTF template? Can anyone provide an example for this?

  • Update 5.0.1 problem

    Tried updating to 5.0.1. An error occured now I cant turn my phone off my computer doesnt recognize it.  Itunes doesnt recognize it.  Its stuck on the update screen on my phone.  And theres no **** way to email apple and ask them *** im suppost to do