Failed to connect to a wifi network

Hello.
I installed on my solaris 10 X86 a wifi card (ASUS WL-310), plumbed it, and configured an ad-hoc wifi network on a windows Xp machine.
When I make a wificonfig -i ral0 scan on my solaris, the ad-hoc network is detected,
but I can't connect to it.... why?
Thank you.

yes.
the strange thing for me is I can connect to the profile I created, with the good essid defined in my Windows connection.
But what about the parameters? What are the good ones?
And the wepkey? I got a thing like this:
89e504f11c734ad552687ffe58
and i set in the params:
./wificonfig wepkey1=89e504f11c734ad552687ffe58
is this good?
and for encryption, i set it to wep, but when I list the parameters, it is set "none" for encryption, why?
Message was edited by:
widjayy

Similar Messages

  • IMac fails to connect automatically to WiFi network

    This is a re-submission of this request for help because I got no response the first time around.
    The trouble began after upgrading to Snow Leopard. Prior to the upgrade I was running 10.5.8 and the airport wireless card would reconnect perfectly every time the computer woke up. After the change to 10.6, it's hit and miss. Sometimes after waking up, the computer will find my wireless router and connect with no problem. On other occasions it will not. Here's what I've observed:
    When it fails to connect, if I immediately click on the wireless icon on the menu bar it will show no wireless networks at all, not mine, not any of my three neighbors, none. If I wait a few seconds (less than a minute) they will suddenly be detected. At that point clicking on my network will result in an immediate connection. I do not know why it takes so long for the Airport card to detect the networks, but that's not the issue. It eventually does. The problem is that the iMac has stopped trying to connect by then.
    How can I get the computer to keep trying to log on (at least periodically) until it succeeds?
    Any help will be greatly appreciated.
    -John

    Test after taking each of the following steps. Back up all data before making any changes.
    1. Make sure the network is on the preferred list by following these instructions. It's important to read the article carefully, as it's the starting point for any further efforts to solve the problem. If you skip any of the steps, the problem may not be solved.
    2. Follow the instructions in this support article under the heading "Symptom: The network connection drops unexpectedly."
    3. Make a note of all your settings for Wi-Fi in the Network preference pane, then delete the connection from the connection list and recreate it with the same settings. You do this by clicking the plus-sign icon below the connection list, and selecting Wi-Fi as the interface in the sheet that opens. Select Join other network from the Network Name menu, then select your network. Enter the password when prompted and save it in the keychain.
    4. From the Location menu at the top of the Network preference pane, select Edit Locations. A sheet will drop down. Click the plus-sign button to create a new location. Give it any name you want. In the new location, set up the Wi-Fi service with the same settings you used before. Click Apply and test.
    5. Launch the Keychain Access application. Search for and delete all AirPort network password items that refer to the network. Make a note of the password first.
    6. Repair permissions on the startup volume.
    7. Turn off Bluetooth and test.
    8. Reset the System Management Controller.
    9. Reset the PRAM.
    10. Reinstall OS X.

  • TS1398 ipad suddenly failing to connect to a wifi network

    My ipad refuses to connect to our home network, and yet it was doing so perfectly for several days. The laptop still recognizes and connects to the wifi perfectly, I've tried all the tips and suggestions provided on the apple help site, including resetting networks on the ipad, etc etc. No luck. Any usggestions out there?

    Have you tried power cycling the router?
    Does the iPad connect to other Wi-Fi networks?
    You could also try to update the router or make sure it is setup in a way that is most compatible with the ipad.

  • Touch screen stopped working. Is there anyway to force a full backup of the iPhone without typing in my passcode lock or is there anyway to force it to connect to a WiFi network so the phone can backup to iCloud??

    Hello all, I could use some help with my iPhone 4, I hope this is the best place to ask!
    The Problem:
    I want to do a full backup of my iphone to either itunes or to icloud. Unfortunately the iphone got wet and isn’t working properly. The phone turns on and still works, but the touch screen no longer works. I have a passcode lock on the phone so iTunes will not allow me to backup it up until I type in the passcode (which I cannot physically do). WiFi had been turned off before it got wet so it won’t connect to any known WiFi networks either to backup automatically to iCloud.
    What happened:
    I had been travelling for 6 months and went tubing on a river with my iphone in a dry bag. Unfortunately the dry bag failed and filled with water ruining my iphone.
    What I’d like to do:
    It’s an old phone and I was planning on buying a new iPhone anyway. I would love to do a full backup to either iCloud or to my computer so when I get a new iPhone I don’t lose anything. I’ve already connected it to my PC and downloaded all the photos and videos off the phone so at least I haven’t lost that, but I would like to be able to recover all the text messages, WhatsApp messages and notes I had created during my 6 months of travel.
    The last time it was backed up to my pc or to icloud was in April, so there are 6 months worth of very meaningful data I would love to keep to remind me of my travels!
    Is there anyway to force a full backup of the iPhone without typing in my passcode lock or is there anyway to force it to connect to a WiFi network so the phone can backup to iCloud??
    iTunes recognizes the phone just now and I tried upgrading the phone to iOS7 in the hopes that it would first backup and then upgrade. Unfortunately all that happened is the phone upgraded to iOS7, but it didn’t backup to iTunes. Now the phone is stuck at the iOS7 welcome screen and I can’t do anything else with it.
    Any ideas or tips would be welcome!
    NOTE: This is NOT a jailbroken iPhone.

    If there is no other way around this, is there anyway to completely wipe the phone then??
    The Apple store agreed to give me a new iPhone 4 as a warranty replacement for $150 (I travel a lot and I have a factory unlocked phone, so this is still worth it for me).  But before I trade it in, I would like to make sure all my data is backed up on the device first.
    When I try and restore the phone now on iTunes, it says I have to turn off Find My iPhone on the phone first before I can restore it.  Now since I can't use the screen I can't really do that.
    So how do I completely wipe the iPhone???
    Thanks!

  • My Apple Tv is connecting to the Wifi network but is not connect to the internet.  So when I look for it on my Airplay it doesn't come up.  I have 3 other ones already working on the network and they are all fine.

    My apple TV is finding and connecting to the Wifi network but then says it is not connected to the internet and then I cannot find it on the iPad through airplay.  I don't want it connected to the internet (as in www.) because for the use I have I only need to use the Apple tvs locally in a sports hall as scoreboards.  I have 3 others working on the same router and they are working fine (as of yesterday)
    On my screen I see (obviously not written like this)
    network connect- yes
    signal strength- fine
    Ip address- fine
    DCN- fine
    Activation- Failed
    This is the only negative I can find and the statement that the Apple TV has connected to the wifi but is not connected to the internet.
    Where has it gone wrong for me. Please help

    It is not properly connected to the network.
    Make sure location is set correctly
    DNS should be on auto (settings - general - network)
    Try ethernet
    Signal strength on device won't account for issues, you would need a network report from istumbler, netstumbler or similar. This will show accurate signal strength along with noise and nearby networks

  • IPhone connects to secured WiFi network, but can't access Internet

    Problem: iPhone connects to my secured home WiFi network, shows WiFi strength bars at top of screen, displays checkmark, lock, power, and blue arrow on WiFi Networks screen; however, cannot access Internet, iTunes store, stocks, Weather or anything else.
    Tests I've run:
    1. iPhone itself:
    ---DCHP:
    IP Address = 192.168.2.102 (within range automatically allocated by LinkSys router--see below)
    Subnet Mask = 255.255.255.0 (as per LinkSys router)
    Router = 192.168.2.1 (as per LinkSys router)
    DNS = 192.168.2.1 (confirmed by Apple as a valid DNS address given the above information)
    Tests:
    *Forget Network and rejoin--Failed to connect to Internet
    *Forget Network, reboot iPhone, and rejoin--Failed to connect to Internet
    *Reset Netowrk Settings and rejoin--Failed to connect to Internet
    *Reset All Settings and rejoin--Failed to connect to Internet
    *Deleted DNS entry--Failed to connect to Internet
    *Connect to Apple Store unsecured network--Success
    *Complete reset of iPhone at Apple Store:
    **Brought home, made no calls, did not sync with iTunes, did not reenter any info deleted by complete reset, joined network--Failed to connect to Internet
    **Synced data previously saved to iTunes, rejoined network--Failed to connect to Internet
    2. LinkSys router WRT310N:
    Tests:
    *Updated Router firmware--iPhone failed to connect to Internet
    *Entered a Static IP address on both router and iPhone--iPhone failed to connect to Internet
    *Reserved an IP within range automatically allocated by LinkSys router--iPhone failed to connect to Internet
    *Reserved an IP outside range automatically allocated by LinkSys router--iPhone failed to connect to Internet
    *Forced MAC filtering to use iPhone WiFi Address--iPhone failed to connect to Internet
    *Disabled all MAC filtering--iPhone failed to connect to Internet
    *Changed security settings:
    **No Security--Success
    **WAP Personal (AES)--iPhone failed to connect to Internet
    **WAP Personal 2 (auto selection AES or TKIP)--iPhone failed to connect to Internet
    **WAP Personal 2 (forced AES)--iPhone failed to connect to Internet
    **WAP Personal 2 (forced TKIP)--iPhone failed to connect to Internet
    *Changed security WAP Password/Passphrase:
    **10 characters (alpha numeric)--iPhone failed to connect to Internet
    **12 characters (alpha numeric)--iPhone failed to connect to Internet
    **10 characters (alpha numeric/ Uppercase alpha)--iPhone failed to connect to Internet
    **10 characters (alpha numeric/ Lowercase alpha)--iPhone failed to connect to Internet
    **10 characters (all numeric)--iPhone failed to connect to Internet
    *Set router to Mixed Wireless N/G/B Network Mode--iPhone failed to connect to Internet
    *Changed network radio band from Auto to Wide to Standard--iPhone failed to connect to Internet each time
    *Set router to Wireless G Only Network Mode--iPhone failed to connect to Internet
    *Changed Router IP address from 198.168.2.1 to 198.168.1.1 (LinkSys default)--iPhone failed to connect to Internet
    3. Microsoft router MN-500:
    Tried this old router (the one I used before purchasing the LinkSys). It is an old (circa 2002) Wireless B base station with WEP Security. The iPhone was never able to connect to the Internet using various settings, many of which were duplicates of the LinkSys tests above.
    On both routers my wife's Dell laptop and my HP printer connect without incident, using the same network/security settings.
    I have always been able to connect to various unsecured WiFi networks; I have never been able to connect to a secure WiFi network (although the only one I've really tried has been my own).
    I am at a loss as to what to do next. Any suggestions?

    SUCCESS!!!!!
    I visited my brother-in-law yesterday and attempted to connect with his secure network. By sheer luck, he is using the exact same model LinkSys router. My iPhone connected first time--so the iPhone was eliminated as a source of the problem.
    I didn't do a lot of troubleshooting at his house, but I did notice that his network was set for both dynamic DHCP and dynamic DNS. I know that either or both of Windstream (my ISP) and my broadband modem requires a pair of static DNS addresses.
    Sure enough, delving real deep into Windstream's support site, I discovered a LinkSys router DNS help page, specifying how to set static DNS addresses in LinkSys routers. I then accessed my router, enterd the known static addresses, saved the router settings, then rebooted the iPhone and connected to the network.
    SUCCESS!!!
    Thanks to Jane, who suggested it was an ISP issue, Jason, and all at Apple support. dumonj, I'll email you directly. Try this suggestion and see if it helps.

  • Ipad2 'fails to connect' to my Wifi.

    My Ipad2 'fails to connect' to my Wifi whereas my Iphone 3GS successfully connects and works without issue on the same router. Wifi is WEP encrypted with 26 character code. The Ipad 2 sees the network, yet will not connect. I have tried the 'reset network settings' option and I'm looking for any further suggestions?

    The process of checking your router settings depends on the router you have.  You will need the manual that came with your router.  If you don't have one, you probably can download a manual from the router manufacturer's website.
    Basically the process is starting your web browser on a computer that is connected to your network.  Entering the IP address of the router in the web address line.  Usually the IP address of the router is the same as the IP address of the computer connected to your network except the last number is 1.  For example if the IP address of the computer is 192.168.0.132, then the IP address of the router would be 192.168.0.1.
    The next question you may have is how do you find the IP address of the computer. If you have a Windows computer, go to Start/Run or Start/Programs/Accessories/Run. Type in "CMD" (no quote marks) and press the Enter key.  A DOS window will appear.  At the command prompt type "ipconfig" and press the Enter key.  The resulting listing should show you the IP address of the computer and the IP address of your router (listed as Default Gateway.)  If you have a Mac I can't help you, because I don't have a Mac, but I'm sure someone on this forum would be able to help.
    Once you enter th IP Address of your router, you should get a login screen.  You will need to log into the router.  Note that the login password is not the network passcode.  If you do not know the Admin login name and password and you are sure no one has changed the password from the default, the router manual will have this information.
    When you are logged into the router you need to consult the router manual to find out how to check the settings.  If purchance you have a D-link DIR-625 I can help.

  • Deskjet 3050 not connecting to my wifi network

    Accidentally pressed Restore Default and my printer will not connect to my wifi network. How do reinstall it please?

    Hi @Rotini 
    A full feature driver for Yosemite is not available for your printer, either from the CD that shipped with your printer or from the HP website. This document applies to HP printers supported in Mac OS X versions 10.6 (Snow Leopard), 10.7 (Lion), 10.8 (Mountain Lion), 10.9 (Mavericks), and 10.10 (Yosemite) that only have drivers available through Apple Software Update.
    With that being said, I can help you put the printer on your wireless network without software. I use this method for iPads, iPhones and other devices that do not have software.
    Restore the network defaults on the printer by pushing the wireless button, going to settings, and then restore defaults. The wireless button should then start flashing, this means it is now in autowireless mode.
    Connect to the network that the printer is broadcasting. It is usually HP-setup-3050a and then part of the MAC address. The wireless light will still be flashing on the printer at this point, this is normal since this is not an actual adhoc connection.
    Load up the Embedded Web Server (EWS) in the browser on your mobile device. The default IP for autowireless is 192.168.223.1.
    Go to the network tab along the top of the EWS.
    Click on Wireless Setup Wizard along the lefthand side to begin configuring the printer.
    You have now completed the Wireless configuration, follow the next 3 steps to start printing.
    The blue wireless light will go solid, put the Mac back on your own network.
    Add the printer to the System Preferences.
    Print 
    Please let me know if this resolves the issue. I look forward to hear from you.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • When i click on safari to use the internet it says "safari cannot open the page because it is not connected to the internet", but i am connected to a wifi network so how do i get safari to work?

    when i click on safari to use the internet it says "safari cannot open the page because it is not connected to the internet", but i am connected to a wifi network so how do i get safari to work?

    you may be connected to the wireless network but the question is the internet working properly on the wireless network...
    what i mean is that i can make a wireless network without the internet so i can save and share files and have other devices connected to the same network access them... but you have to make sure that your internet it running properly... may have to reconfigure the router is your using PPPOE or if it was working prior to your post then try to restart your modem... that usually resolves most issues.

  • Can't Connect to any WiFi network

    I just got my iPhone yesterday and I'm already having a serious problem,I can't connect to any WiFi networks.
    I can see the networks around me and I can select networks that I've setup and I know are open or I know the security passwords, I can even enter the network passwords for the ones that require them and it accepts them without complaint. When I select a network I get a little check mark next to that network which I assumes means it should be connected to that network. However, the iPhone never actually connects to them, i.e. no IP address, no router no nothing in the network settings screen for each network, and always appears to the using the Edge wireless network when accessing the internet.
    I've tried DHCP and static IP but neither works.
    I updated the phones software to 1.1.4, has anybody reported problems like this with this or any version of the software.
    Any help would be much appriciated.
    If I can't get this resolved today I'm returning to the AT&T store tonight for a new one.
    Thanks
    Matt S.

    theevilone,
    I have personally used an iPhone with routers from D-Link, Netgear, Linksys, Apple and Belkin.
    Some routers, regardless of manufacturer need to have their firmware updated. Generally speaking if you look at the release notes, the same updates that resolve issues with DHCP for game systems and PDAs, also resolves them for the iPhone.
    In addition hardware or MAC address filtering can cause issues where you connect to the network and not get DHCP.
    Hope this helps,
    Nathan C.

  • HT1695 I can't connect to my wifi network not even when it has no security on I get "unable to connect to network "netgear" anyone have this issue and maybe know how to fix it?

    Hi
    When I try to connect to my wifi network I receive message "Unable to join network "Netgear" this starated as of 8/16 before thsn I never had this problem
    connecting to this network previously .I have attempted after manually entry of DNS still nothing a;so did the network reset, and full reset of settings and still
    get nothing I even have my network unsecured at this very moment still nothing changed it does not show the network info ; no DNS address or anything any suggestions

    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router.
    - Reset networks settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points

  • My ipad mini is not connecting to the wifi network. I have the correct network and password chosen, but the message I get is that "unable to join". I have reset my ipad and it still says the same thing.  What can I do about this.

    My ipad mini is not connecting to the wifi network. I have the correct network and password chosen, but the message I get is that "unable to join". I have reset my ipad and it still says the same thing.  What can I do about this?

    Hey Dr kris,
    Thanks for the question, and welcome to Apple Support Communities.
    I understand that you are having issues connecting to Wi-Fi networks with your iPad mini. The following troubleshooting assistant may lead to a resolution:
    Apple - Support - iPhone - Join a network Assistant
    http://www.apple.com/support/iphone/assistant/wifi/
    For more in-depth troubleshooting, refer to the following article (refer to the "Unable to connect to a Wi-Fi network):
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/TS1398
    Thanks,
    Matt M.

  • My ipod 5 was stolen but I have find my ipod installed on it but my ipod isn't/never was connected to a wifi network when it was stolen so how will my ipod play sound or go on lost mode and if there's no wifi connected to it?

    my ipod 5 was just recently stolen in a waterpark (same with my best friend) and when i went on to find my ipod I pressed play sound and lost mode but it never successfully did all those things because my ipod wasn't or isn't connected to a wifi network as it says in the app. so how will I ever find my ipod if it never is going to connect to a wifi network without the thief accessing my ipod (I have a passcode). and also when I check the app once in a while it says ipod is online but cannot find location, so does that mean the thief is using my ipod or is trying to get in?

    Yo are correct. It has to connect to internet for the FindMyiPhne features to be transmitted to the iPod
    lost/stolen                                     
    No app on the iPod is required.                           
    - If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected, on a computer browser go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up or conbtinue to show off-line.
    - You can also wipe/erase the iPod and have the iPod play a sound via iCloud.
    iCloud: Erase your device
    iCloud: Use Lost Mode
    - If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
    - Change the passwords for all accounts used on the iPod and report to police
    - There is no way to prevent someone from restoring the iPod (it erases it) using it unless you had iOS 7 on the device. With iOS 7, one has to enter the Apple ID and password to restore the device.
    - Apple will do nothing without a court order                                               
    Reporting a lost or stolen Apple product                                              
    - iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

  • Trying to set up my brand new MacBook Pro and it does not connect with the wifi network I have selected for this purpose. Nothing wrong with the wifi as both my iPad and iPhone are happily connected. Suggestions for connecting to the wifi network accepted

    Setting up my brand new MacBook Pro and it will not connect to the wifi network. Nothing wrong with the network which is happily working for my iPhone and iPad! Suggestions accepted for making this connection.

    Fixing this is a two step process:
    1) System preferences > WiFi/Airport ...
    ... check [√] Ask to join new networks
    "Known networks will be joined automatically.
    If no known networks are available, you will
    be asked before joining a new network."
    2) Remove unwanted networks from the list of "known" networks under
    System preferences > WiFi/Airport > (Advanced) > | Airport/WiFi pane ...
    Close the window and save changes. If no joy, do a restart to ensure you are playing under the new rules.

  • I am able to connect to my wifi network but am not able to connect to other computers on my network

    I am able to connect to my wifi network but am not able to connect to other computers on my network. I have installed windows 7 on parallels desktop, from windows i am able to access my network computers. But from Mac i can only access internet but not network computers Please help

    Ok, well if you're sure that there are shared folders on your PC's, then try this:
    Click somewhere on desktop, so you're in finder > Go > Connect to Server (shortcut to all of this is Command + K) then type in: smb://ipaddresshere
    eg:
    smb://192.168.1.7
    Then either connect as guest, or login with the PC's (not your mac's) username & password.

Maybe you are looking for

  • I previously purchased a movie but it no longer shows up on my itunes account. How can I retrieve my movie. I still have the receipt too.

    I lost a movie that I purchased form Itunes a year ago. It is no longer in my library but I have a receipt to prove that I purchased it. How can I recover it? thanks

  • Unwanted audio in burned final idvd

    Have you ever encountered this problem in iMovie/iDVD? I recently finished editing together a wedding for friends. The timeline is a simple sequence of clips with transitions and background music that I easily imported directly from itunes. When edit

  • Problem in Report Formula Column

    I recently Transfer my databse 9i to 10g and iam using developer 2.1 release 5 as a front hand. so problem is that my reports run successfully with oracle 9i but when i change my database to oracle 10g iam facing error in reports formula column. when

  • What is the best way to do hi-res printing for iCal?

    I am trying to figure out a way to print some iCal calendars in a hi-res format that can be imported as a PDF or TIF into a (ugh) MS Publisher 07 document. When I use the straight 10.6.2 print to PDF format, it loses resolution. Any suggestions on ho

  • SAPEVENT - Calling a method

    Hello everyone, I am trying to call a method from my HTML and I need to pass my method some parameters from my HTML page.(my HTML page is rendered by XSLT and displayed in the CustomerFactSheet tab/HTML control in CIC) . Currently, I use the SAPEVENT