Failed to export the report \n Crosstabs and OLAP grids are not supported in this export format
Post Author: ajaymoudgil
CA Forum: Other
We are using Crystal Reports (Product Version: 11.0.0.1282). We encountered with a problem while we are going to export report in CSV (Separated Text). The report Contained Cross-Tab. Its Shows the Error Message u201CFailed to export the report \n Crosstabs and OLAP grids are not supported in this export formatu201D. Please find the attachment with this mail having screen shot for the same.
We were able to export CSV (Separated Text) Format in Crystal Report Version 7 for the same report. Please let us know any way(s) so that we will successfully export the report in CSV (Separated Text) format in Crystal Reports version 11.
Thanks,
Ajay Sharma
Hi Ludek ,
Thanks for reply,
I download CR2008 Redistribale & Installed it.
But still I am getting following error on client PC;
at CrystalDecisions.ReportAppServer.ConvertDotNetToErom.ThrowDotNetException(Exception e)
at CrystalDecisions.ReportSource.EromReportSourceBase.ExportToStream(ExportRequestContext reqContext)
at CrystalDecisions.CrystalReports.Engine.FormatEngine.ExportToStream(ExportRequestContext reqContext)
at CrystalDecisions.CrystalReports.Engine.FormatEngine.Export(ExportRequestContext reqContext)
at CrystalDecisions.CrystalReports.Engine.ReportDocument.ExportToDisk(ExportFormatType formatType, String fileName)
Please give solution.
Thanks
Similar Messages
-
Currently using Flash Pro CS5, getting error when trying to open CS4 file. Error is "Slides and Forms documents are not supported in this version of Flash. Please open in previous version. Has there been a fix or patch to this issue or do I have to convert back to CS4 to open the file?
Having the same problem in CS6. I can tell you that converting back to CS4 will NOT solve the problem. It seems when support for backward compatibility is discontinued, there's just no way to get
any help at all? Absolute failure to provide any user support so far... -
i get the following message when i try to open any of my documents : frozen panes and split panes are not supported and were removed. All my documents open blanc!
Hi Louisa,
louisa_16_za wrote:
i work with Numbers on my MiniMac and then save the files as Excel because the university only works with Windows.
Numbers is not an Excel clone. Importing and exporting between Numbers and Excel will eventually build up glitches.
If the university only works with 'Windoze' it might be better if you use Excel or a free version of Office (for example, Libre Office or Open Office).
If your marks depend upon a professor who uses Excel, go with the flow.
http://www.howtogeek.com/187663/openoffice-vs.-libreoffice-whats-the-difference- and-which-should-you-use/
Regards,
Ian -
If DVD Movies, Audio CD's and even burning CD and DVD's are not supported, what is the point of DVD & CD Sharing then? Wouldn't it just be better to remote in or use a thumb drive if it's only able to be used for data transfer?
Or am I missing the bigger picture?As long as you have a Superdrive or an external burner/drive, burning, watching, installing, etc. from CD or DVD will work just fine. And so will sharing.
-
The forward, back, refresh, and stop buttons are not working. Even after installing the latest Firefox update. Also my home page stopped loading upon startup even tho I have it setup to do so. Anyone else experiencing these issues? This is my second request for help and of course, Firefox on-line support is always closed.
Those are all symptoms of a problem with the places.sqlite file, for details see http://kb.mozillazine.org/Locked_or_damaged_places.sqlite
-
I upgraded to Lion yesterday. Now I keep getting and error message: there was a problem connecting to the server. URLs with type "file:" are not supported. What server? How do I get rid of this.
Take a look at this link, https://discussions.apple.com/message/16156214#16156214
-
Trying to import cd when this message appears "the current encoder settings for bit rate and sample rate are not valid for this file". Any suggestions?
Thanks so very much. I chose MP3 and Download and it is working beautifully. Have a wonderful day and it is so nice of you to get right back to me. I'm trying to cut a DVD for my grandson's grad party and I got most of the photos and didn't have any music since I lost everything in a clean install. Could hug you!
-
I migrated all files from OS 10.7 to OS 10.8 through time machine. However, I always see error packages like the following if I want to run some .pkg files.
You can't open the application "..." because it is not supported on this type of Mac.
But when I switch to a different account, then the .pkg files can be run. Therefore, I think that there might be something wrong with my account configuration files. But I don't know which one. Does anybody which one might cause the problem and how to fix it? Thanks!softwater wrote:
And both are on the same startup disk, right? Because, to be honest, it's hard to figure out how you could have this problem with both accounts on the same startup disk, so I just want to check that before we get too involved.
Assuming that's the case, the first thing I'd do is remove all those except Dropbox from the list, then restart the mac and test for the problem. If that doesn't solve it, run this free analytical tool and post the results back here so we can see if anything stands out:
http://www.etresoft.com/etrecheck
I have removed these login items. But I can not restart my mac now and I will have to restart it later.
Here is the output of etrecheck. Would you please take a look if there is anything wrong?
Hardware Information:
MacBook Pro - model: MacBookPro9,1
1 2.6 GHz Intel Core i7 CPU: 4 cores
16 GB RAM
Startup Items:
CUDA - Path: /System/Library/StartupItems/CUDA
System Software:
OS X 10.8.2 (12C3006) - Uptime: 3 days 2:52
Disk Information:
APPLE HDD HTS727575A9E362 disk0 : (750.16 GB)
disk0s1 (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) /: 749.3 GB (311.8 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R UJ-8A8
USB Information:
Apple Inc. FaceTime HD Camera (Built-in)
Apple, Inc. Keyboard Hub
Logitech USB-PS/2 Optical Mouse
Apple, Inc Apple Keyboard
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
FireWire Information:
Kernel Extensions:
com.eltima.ElmediaPlayer.kext Version: 1.0
com.bresink.driver.BRESINKx86Monitoring Version: 8.0
com.nvidia.CUDA Version: 1.1.0
Problem System Launch Daemons:
[failed] com.apple.emond.aslmanager.plist
[failed] com.apple.xprotectupdater.plist
Problem System Launch Agents:
[failed] com.apple.afpstat.plist
Launch Daemons:
[loaded] com.adobe.fpsaud.plist
[loaded] com.cisco.anyconnect.vpnagentd.plist
[loaded] com.eltima.ElmediaPlayer.daemon.plist
[loaded] com.google.keystone.daemon.plist
[loaded] com.timesoftware.timemachineeditor.backupd-auto.plist
[loaded] io.redis.server.plist
[loaded] org.macosforge.xquartz.privileged_startx.plist
Launch Agents:
[loaded] com.adobe.CS4ServiceManager.plist
[loaded] com.cisco.anyconnect.gui.plist
[loaded] com.google.keystone.agent.plist
[loaded] com.Logitech.Control Center.Daemon.plist
[loaded] com.nvidia.CUDASoftwareUpdate.plist
[loaded] org.macosforge.xquartz.startx.plist
User Launch Agents:
[loaded] com.adobe.ARM.930da3ce175de4e82bd3cdf1dd8571f74bd3b6a7236bc94bfc00f6e9.plist
[loaded] com.akamai.single-user-client.plist
[failed] [email protected]
[loaded] org.apache.couchdb.plist
User Login Items:
Citations
Dropbox
Xmarks for Safari
VNC Viewer
3rd Party Preference Panes:
Akamai NetSession Preferences
CUDA Preferences
DivX
Flash Player
FunctionFlip
Logitech Control Center
NuFile
SwitchResX
TeXDistPrefPane
Xmarks for Safari
Internet Plug-ins:
AdobePDFViewer.plugin
DivXBrowserPlugin.plugin
Flash Player.plugin
FlashPlayer-10.6.plugin
Google Earth Web Plug-in.plugin
googletalkbrowserplugin.plugin
iPhotoPhotocast.plugin
JavaAppletPlugin.plugin
NPDjVu.plugin
PrintDialogExt.plugin
npgtpo3dautoplugin.plugin
OfficeLiveBrowserPlugin.plugin
QuickTime Plugin.plugin
RealPlayer Plugin.plugin
Silverlight.plugin
User Internet Plug-ins:
Bad Fonts:
None
Top Processes:
11.1 % WindowServer
1.4 % EtreCheck
0.3 % vncviewer
0.1 % beam.smp
0.1 % ps
0.1 % JavaApplicationStub
0.0 % Cisco
0.0 % CoreServicesUIAgent
0.0 % Dictionary
0.0 % AdobeAcrobat -
I have a Mac PowerPC G5 and i just installed the Version 10.5.4 to be able to install Virtual DjLE , and after I installed it, i try to open it and there was an error msg saying : " you can't open the application virtual dj le because it is not supported on this architecture"
What can I do to resolve this? ... Can someone help me with this?? ..
Thank you for your help!Hi, we're out of luck...
MAC SYSTEM REQUIREMENTS
MINIMUM system requirements:
Intel® processor
Mac OS X v10.5.x
1024x768 resolution
CoreAudio compatible soundcard
1024MB RAM
50MB free on the hard drive
RECOMENDED system requirements:
Intel® processor
Mac OS X v10.6.x
1440x900 resolution
Multi-channel CoreAudio compatible soundcard
2048MB (2Gb) RAM
200MB free on the hard drive
Additional requirements for Video mixing:
ATI™ or NVIDIA® video chipset w/256MB of Dedicated DDR3 RAM
Video must support dual-screen output
Supported Operating System and Processor Platforms:
MINIMUM: Mac OS X v10.5 Leapord on Intel processor platform
RECOMMENDED: Mac OS X v10.6.x Snow Leapord on Intel processor platform
Apple® Mac OS X 10.4.x Tiger or older are not supported
Motorola® (PowerBook® G4) processor platform or older are not supported
http://www.virtualdj.com/products/virtualdj/index.html
Might see if the still have version 6.x here...
http://www.virtualdj.com/download/updates.html -
A day or two ago I went through installing Adobe InDesign CS4 on Leopard OS X.5.8. After what appears to be a successful installati
on, in launching InDesign CS4 the message " You can't open the application "Adobe InDesign CS4" because it is not supported on this
architecture" comes up". Calling in to support and speaking with the agent who read through previous posts, suggested to me that I
should try the same fix that has been suggested when I ran across an error when installing Adobe InDesign CS4 on another separate ha
rd drive externally connected to this computer running Snow Leopard OS X.6.1 for the error reading: "Damaged &/or incomplete install
ation" when launching afterwards. The support technician told me to first delete with the uninstall Adobe InDesign CS4, InDesign.
Following this I am told to run the CS4 Cleanup Utility. I restart the computer each and every time after running each of the utili
ties. Now I am told to install InDesign as a trial version from the DVD and after installation to go ahead & enter the serial numbe
r. When launching InDesign CS4 after installation got back the same error as before: "You can't open the application "Adobe InDesig
n CS4" because it is not supported on this architecture" comes up". Followed KB404711 article and no success. What else can be don
e to fix this issue?
This morning contacted Adobe Support regarding this response:
After having a detailed reserach on your issue i acme to the conclusion
that the problem you are having is not related to Adobe software but its
in fact related to your MAC version ( OSX-5.8). While reseraching your
issue i came across
to many forums where a lot of postings were about the similar error but
with different products the only comon thing was all the Errors were
with Mac machine , also when you check the system requirements for
Adobe Indesign Cs4
by going to the following link
http://www.adobe.com/products/indesign/systemreqs/?promoid=DRHXE you
will find the Mac OS version supported are from Mac OS X
v10.4.11–10.5.4. but we do support Snow Leoprad , so i would like
to advise to you to either contact your system manufacturer or upgrade
to Snow Leopard ( mac os x 10.6)
I have been told that my case is being sent to Level 2 agents and that it can take 24-48 hours for a response. In the meantime I decided to see what the Support Forums can do for me. Until then I am down. Thanks for the help.In the application folder there is a folder 'Adobe InDesign CS4' within which there is just the application file. I would expect there should be more file there??
I've un-installed and installed again - still the same.
Even downloaded the dmg again and done thwe whole thing over again. -
All of the sudden my System Preferences in Mavericks has stopped working and I get the error message:
You can't open the application "System Preferences.app" because it is not supported on this type of Mac.
It was working fine before this, and I have run Permissions Repair, restarted to another partition and run Diskwarrior and TechTool Pro, but none of those has helped. Anyone have any ideas why this happened, and what I can do to fix it?See this entire thread
https://discussions.apple.com/message/4241006#4241006 -
Hello,
I am new to NI and to data acuasition cards in general. I am trying to put an application togather that would play large audio file using NI9263.
And i am getting the following error.
DAQmx Error: Non-buffered hardware-timed operations are not supported for this device and Channel Type.
Status Code: -201025
Does my hardware support buffering ?
can i use the EveryNSamplesCallbackAO function ?
Any sample code, will be helpful at this time. Thanks.Hi yma200,
Are you using a USB 9263? If so, this might be of help:
http://digital.ni.com/public.nsf/allkb/EC1968728E660B288625780700570D06?OpenDocument
If it doesn't help, can you please post the code that you have that is causing your error?
Regards,
Bogdan Buricea
Applications Engineer
National Instruments -
Inbound Queue blocked: Parallel and alternative sequences are not supported
Hi,
Just now, I checked the Inbound Queue in SCM system through SMQ2 and found which was blocked by error message "Parallel and alternative sequences are not supported". Could you please tell me what does it mean? How to fix it?
Thanks,
Quanyin SuHi Quanyin Su,
Parallel and Alternative sequences are used in routing.
I believe you are trying to CIF PPM/PDS from ECC to APO and you are getting this queue stuck at inbound of APO.
Both the alternative and parallel sequences are supported in APO.
Alternative sequence is used as alternative modes in APO.
I can think of this as a master data issue.
At least one of your work center used in either of the sequences is not available in APO or is not APO relevant.
Could you please check your master data such as all the work centers used and make sure your parallel and alternative sequences are consistent.
Once you made sure that master is available in ECC, you can CIF it to APO by using CURTO_CREATE transaction in ECC.
Please see below link for Routing and its usage in APO:
http://help.sap.com/saphelp_apo/helpdata/en/99/ed3a981d0f11d5b3fc0050dadf0791/content.htm
You also need to activate a BADI in order to sent alternative sequences to APO.
Below thread has all the details regarding this.
Re: /SAPAPO/CURTO 103 : Mode .. is not assigned to an activity
Regards,
Abhay Kapase
Edited by: AbhayKapase on Aug 5, 2011 2:24 PM -
CS4 "You cannot open the application Adobe InDesign CS4 because it is not supported on this archit
Just installed CS4. Ai and Ps open fine. i get this prompt with InDesign.
You cannot open the application Adobe InDesign CS4 because it is not supported on this architecture.
any clues on how resolve this?
thanks!I'm having exactly the same problem with InDesign from CS4 Design Standard (Photoshop and Illustrator both work), and I don't know what to do. I've called up the Adobe support line five times, and received five different answers, none of which have worked (and on three other occasions, my call was dropped, once after an hour on hold).
One of the Adobe tech support people said to me "None of CS4 works with either 10.5.8 or Snow Leopard. We will issue a patch for that soon" - which directly contradicts what Adobe itself says on this site. I also went to see a Mac Genius, who couldn't help either.
I have a 2GHz Macbook with 2GB RAM running 10.5.8. I've run the uninstall, and the Adobe Clean Script, I've repaired permissions on my drive (which isn't case sensitive), restarted, reinstalled, tried installing on an external drive and then tried downloading the trial, in case it's the install CD - nothing works.
Any suggestions, anyone? Might there be a problem with my library that is stopping the install? Something else?? I bought CS4 for InDesign primarily, this is not good. -
i just purchased a refurbished ipad gen 1 when i pluged in the wall charger with the usb cable a window came up and said (charging not supported with this accesory) the battry was almost dead so i pluged in the wall charger and
the battery has been charging for 24 hrs and is only 50%charged it is the factory use charger for this unit why does this error come up and why is it taking so long the software is up to dateNot normal. Take it to an Apple Store for evaluation.
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
How to Save and Prolong the battery life of your new ipad
https://discussions.apple.com/thread/4480944?tstart=0
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
To Extend a Device’s Battery Life, Get to Know It Better
http://tinyurl.com/b67c7xz
iPad Battery Replacement
http://www.apple.com/batteries/replacements.html
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
Cheers, Tom
Maybe you are looking for
-
just got a thunderbolt -vga adaptor but on the old tv im trying to use as a secondary monitor i am getting a "no VGA signal"
-
How to get text of itab header and structure field name dynamically?
HI. I'm just trying display itab to web. of cause I can use <htmlb:tableView> but I need display by loop itable for my special reason. the table is dynamic structure that means header line should be changes depends on structure description. '<htmlb:
-
ABAP APIs for MDM Workflow Modification
Hello All I require a help from all of you. Currently I have a particular business case where I need to configure the MDM workflow & do changes & modifications in it via ABAP APIs. Currently we are having Java APIs in plcae. Can you please tell me wh
-
Help after the new dowload please
Hi Is anyone else having the same problem as me, if so how did you fix it? If I play the party shuffle, the first song plays then stops when the second song should start. It also oes not transfer the recently played song to the recently played area o
-
My iPad Mini is frozen and won't turn on.
My iPad mini was frozen in an app. I rebooted by pressing the home button and sleep button at the same time. However, it won't turn on. It is stuck in the power up screen, with the apple. It won't go past this. Please help. Thanks...