Failed to get proc address for GetLogicalProcessor...

hi everyone whenever i try to open the skype after instalation it show me this error"Failed to get proc address for GetLogicalProcessorInformation (KERNEL32.dll."please help me to solve this problem.i will be very thankfull to you for this favour.thank you.

Hi, i think that the application server part is looking for a /etc/hosts entry
in this format:
127.0.0.1 localhost
As i noticed, this is used for internal communication.
Try this entry as is, without a domain...

Similar Messages

Failed to get IP address for Local Host (2) , OPMNCTL: opmn start failed

HI,
Hi, I have installed on Oracle 10g on Redhat Enterprise Linux V.2.1 . I was able to start OEM without any issues. Recently I had changed the static IP address and I couldn't able to start OPMNCTL and getting the following error while starting opmnctl start. error message is as follows.
Failed to get IP address for local host(2).....
Failed to get IP address for local host(2).....
Failed to get IP address for local host(2).....
my current configuration in /etc/hosts file is as follows.
127.0.0.1 localhost.localdomain servername
After going through some of threads available in Oracle, I have added the static IP address in the /etc/hosts but still I am getting the same error.
my new hosts file is as follows.
127.0.0.1 localhost.localdomain servername
10.21.253.102 localhost.localdomain servername
I don't know why this is looking for localhost (2). I did not set up any local host (2) and I could not see anything in my network confiuration also.
could you please help me in this issue? I appreciate your help in this regard.
Thanks
venkat

Hi, i think that the application server part is looking for a /etc/hosts entry
in this format:
127.0.0.1 localhost
As i noticed, this is used for internal communication.
Try this entry as is, without a domain...

"failed to get MAC address for machine"

here is the jist of things.
installed leopard and have it pimped out to my personal specs. I like where everything is and how things are working. No issues. just so you know, i only use WIFI for internet, i share with the guys upstairs. In order to get wifi on my machine, i use a USB dongle. works great no issues with it ever, well until i physically broke it. No big deal. So i replaced it with another one, different drivers/chipset worked.. And since i installed leopard i only backed it up once with TM, i dont care for daily/hrly backups, weekly is fine for me. Now after 2 weeks and a new usb network card. TM gives me an error. i click on the little red i and it says "the backup volume could not be found" so googled and searched the forums not much help, so i tried and formated my ext drive repaired and click on TM again, same error. In the error log in console, right after i turn on TM i get this error, "failed to get MAC address for machine" then 180 secs later, TM fails. again, and again.
Can anyone tell me where i can find what MAC address its looking for??? ethernet has never been plugged in to my machine ever. its only been online via USB wifi. Im really lost here, i dont know what i can do.. im sure if i try another drive ill get the same error. please help if you can.. much appriciated.
Jamie

yeah i get a 'failed to get mac address' message too. what's weird is that it seems that leopard 'broke' my ethernet (there was no mac address, couldn't connect to the internet through ethernet after a clean install), and then 10.5.2 'fixed' it. for some reason, i have an 'ethernet 2' heading in system preferences that works correctly and has a mac address and everything, while the regular 'ethernet' tab doesn't work at all. however, i still get this time machine error. i don't understand why time machine is so incredibly fickle. sorry, i'm really of no help to anyone, other than adding another voice to the frustration.

Failed to get procs for sound track -2126

What is the meaning of the error message of "Failed to get procs for sound track -2126"? I am attempting to convert a Quicktime movie file that uses Sorenson Video & QDesign Music 2 codecs.

Certainly someone must know the meaning for this error message. Is there a list of error messages for compressor and QT??

HT1338 Hello, i currently acquired a Mac Book Pro and running Mac Os X 10.8.3, but i have failed to get the driver for my canon inkjet printer. could anyone help me out please? Thank you

Hello, i currently acquired a Mac Book Pro and running Mac Os X 10.8.3, but i have failed to get the driver for my canon inkjet printer. could anyone help me out please? Thank you

You may be able to download it fom here:
Printer and Scanner software available for download:
http://support.apple.com/kb/HT3669?viewlocale=en_US

How to fix Workflow failed to get user profile for user:

hi All,
How to fix Workflow failed to get user profile for user when using Lookup function in sharepoint designer?

Try to use “As string” instead of “Login Name” for the “Return field as”.
Regards,
Jayant
jayant prabhakar

"failed to get function context for the data region"

Hello,
Is it possible to use {function::} inside a spry:when? It works, but it also shows an error:
"getValueFromDataSet: Failed to get function context for the paceSetter region."
excerpt:
<div spry:choose="spry:choose">
<div spry:when="'{function::diff4700}' < '0'"><span class="psNegative">{function::diff4700}</span></div>
the spry:when looks to see if the number returned by function::diff4700 is a negative number, then adds a span class to change it to red. Code works the way I want it to, but can't make the error message go away.
thank you for any assistance or ideas to make error go away

Hello,
Is it possible to use {function::} inside a spry:when? It works, but it also shows an error:
"getValueFromDataSet: Failed to get function context for the paceSetter region."
excerpt:
<div spry:choose="spry:choose">
<div spry:when="'{function::diff4700}' < '0'"><span class="psNegative">{function::diff4700}</span></div>
the spry:when looks to see if the number returned by function::diff4700 is a negative number, then adds a span class to change it to red. Code works the way I want it to, but can't make the error message go away.
thank you for any assistance or ideas to make error go away

Failed to get airlineregion context for the spryregion1 region

Hi ,
I am new to spry and using Neston json dataset.
My data is uploding perfectly but i am getting an error like:-- "Failed to get airlineregion context for the spryregion1 region".
where airlineRegion is one of my parenbt regions.
Kindly suggest.
Satish.

Hi Satish,
You have not given us much to work on and especially because we do not get this error, I can only assume that you are not doing the right thing.
FYI I quote what is being suggested to newbies:
                        Announcement:
                        New to Spry, or the Spry forums?
                            Hide Details
Before you post a topic please verify
that:
You
are using the latest Spry files
The latest version of
the Adobe Spry Framework is 1.6.1, this is the same version that ships
with Dreamweaver CS4. If you use Dreamweaver CS3 (uses Spry 1.4), its
wise to upgrade your files to the latest version. This can easily be
done using the Spry Updater that can be found here.
Your
question was not asked before
Using the search
functionality on forums you can easily find out if your question has
been answered before. While you are in search, you can specify the
search locations. The Spry forum can be found under:
Adobe
Labs > Spry Framework for Ajax
Yoru question can not be
found in the existing documentation
Spry provides you
with allot of documentation this can found on different locations. In
the sidebar of this forum you can find a small summary of resources that
will help you on your way.
If these options do not apply to your question,
please be so kind to also supply the following information in your topic
together with a clear description of your issue:
What
browsers does this issue occure:
example: Internet Explorer 8 on
Window 7 and Firefox 3.0 on Mac OSX
What version
of Spry are using:
example: Spry 1.6.1 ( the version number can
be found in license header of the .css and .js files )
What
is the url of your website or page in issue:
example: http://www.example.com/page/in/issue.html
Step
to reproduce the issue:
example: Scroll down till you find the
header "help", there you will see a Spry Accordion. When you click on it
it will not open or close.
So users can provide you with a
better answer, without having to ask you for further details.
I look forward to helping you.
Ben

Failed to get root path for 'UED'

Good afternoon.
I have a problem with my IDES installation in University.
After a server reboot, MAXDB doesn't want to give up.
This is the log:
$ tail startdb.log
Error! Connection failed to node dolphin for database UED: database not found
Opening Database...
Failed to get root path for 'UED'
Error! Connection failed to node dolphin for database UED: database not found
Fri Aug 24 17:11:11 CEST 2007
Connect to the database to verify the database is now open
dbmcli check finished with return code: 0
If I try to run dbmcli manually, I receive the same error:
$dbmcli -u control,****** -d UED
Failed to get root path for 'UED'
Error! Connection failed to node (local) for database UED: database not found
Any suggestions??
Regards,
Luca

Hi Markus,
I think that my problem is not completely solved.
In fact, now the IDES system is on , but I'm not able to login into it.
When I select UED system on menu of my JAVA GUI and press "connect button", I can't access to SAP login window. (see )
I'm sure that is not a "network problem" of my laptop. (the problem persist also with others SAPGUI).
I've tried to <b>reboot</b> the server, but the situation is always the same. No way to access into the system, popup "connecting" reman.
If I try to see process that are running in the server, via "top -u uedadm" command, this is the situation:
3791 uedadm    16   0 87988 9768 1996 S    0 0.2   0:00.00 sapstartsrv
4775 uedadm    15   0 54664 1580 904 S    0 0.0   0:00.04 csh
4911 uedadm    16   0 54664 1604 920 S    0 0.0   0:00.05 csh
5388 uedadm    20   0 26788 1896 1064 S    0 0.0   0:00.04 sapstart
5408 uedadm    16   0 35736 5748 3024 S    0 0.1   0:00.06 ms.sapUED_DVEBM
5409 uedadm    16   0 4480m 100m 86m S    0 2.5   0:00.95 UED_00_DP
5410 uedadm    16   0 27528 2988 2224 S    0 0.1   0:00.05 co.sapUED_DVEBM
5411 uedadm    16   0 27488 2952 2216 S    0 0.1   0:00.04 se.sapUED_DVEBM
5412 uedadm    18   0 17620 2432 1800 S    0 0.1   0:00.01 ig.sapUED_DVEBM
5413 uedadm    16   0 210m 12m 3352 S    0 0.3   0:00.20 igsmux_mt
5414 uedadm    16   0 183m 18m 10m S    0 0.5   0:00.16 igspw_mt
5415 uedadm    16   0 183m 18m 10m S    0 0.5   0:00.19 igspw_mt
5430 uedadm    15   0 188m 8296 5972 S    0 0.2   0:00.05 gwrd
5431 uedadm    18   0 164m 4376 2844 S    0 0.1   0:00.63 icman
5432 uedadm    17   0 4486m 22m 7988 S    0 0.6   0:00.01 UED_00_DIA_W0
5433 uedadm    17   0 4486m 22m 7976 S    0 0.6   0:00.01 UED_00_DIA_W1
5434 uedadm    16   0 5201m 79m 63m S    0 2.0   0:00.82 UED_00_DIA_W2
5435 uedadm    17   0 4486m 22m 7976 S    0 0.6   0:00.01 UED_00_DIA_W3
5436 uedadm    17   0 4486m 22m 7980 S    0 0.6   0:00.02 UED_00_DIA_W4
5437 uedadm    16   0 4486m 22m 7980 S    0 0.6   0:00.02 UED_00_DIA_W5
5438 uedadm    16   0 4486m 22m 7976 S    0 0.6   0:00.01 UED_00_DIA_W6
5439 uedadm    16   0 4486m 22m 7976 S    0 0.6   0:00.02 UED_00_DIA_W7
5440 uedadm    17   0 4486m 22m 7980 S    0 0.6   0:00.01 UED_00_DIA_W8
5441 uedadm    16   0 4486m 22m 7976 S    0 0.6   0:00.02 UED_00_DIA_W9
5442 uedadm    17   0 4486m 22m 7976 S    0 0.6   0:00.02 UED_00_DIA_W10
5443 uedadm    17   0 4486m 22m 7984 S    0 0.6   0:00.01 UED_00_DIA_W11
5444 uedadm    17   0 4486m 22m 7972 S    0 0.6   0:00.02 UED_00_UPD_W12
5445 uedadm    17   0 4486m 22m 7972 S    0 0.6   0:00.01 UED_00_UPD_W13
5446 uedadm    17   0 4486m 22m 7976 S    0 0.6   0:00.01 UED_00_UPD_W14
5447 uedadm    16   0 4486m 22m 7976 S    0 0.6   0:00.02 UED_00_ENQ_W15
5448 uedadm    16   0 4486m 22m 7976 S    0 0.6   0:00.02 UED_00_BTC_W16
5449 uedadm    17   0 4486m 22m 7980 S    0 0.6   0:00.01 UED_00_BTC_W17
5450 uedadm    17   0 4486m 22m 7976 S    0 0.6   0:00.01 UED_00_BTC_W18
I think that is not a performance problem of server, because
"free -m" command
                   total       used       free     shared    buffers     cached
Mem:          3946       2249       1697          0         50        950
-/+ buffers/cache:       1247       2699
Swap:         8001          0          8001
Can you please me, give some suggestions?
Thank you very much.

Worflow failed to get user profile for user

I have a workflow that sends an email to a user. In the workflow email, one line has the lookup [%User Profiles:Name%], with Return field "As String" of the list item Field "Account Name" with Value "Current Item:Created By".
This workflow works for everyone, except it Errors when one user creats an item in this list. The error is "Workflow failed to get user profile for user... System Account - An error has occurred in Workflow Name"
and more detailed error found in logs: "AutoStart Workflow: Microsoft.SharePoint.SPException: Recursive workflows are not permitted.     at Microsoft.SharePoint.Workflow.SPWorkflowAutostartEventReceiver.<>c__DisplayClass1.<AutoStartWorkflow>b__0(SPSite
superUserSite, SPWeb superUserWeb)
System.InvalidOperationException: Workflow failed to get user profile for user:domainName\username.     at Microsoft.Office.Workflow.Actions.UserProfileHelper.GetProfile(String propertyName, String user)     at Microsoft.Office.Workflow.Actions.ProfileHelperBase.GetProfileString(String
propertyName, String userOrOrganization)     at Microsoft.Office.Workflow.Actions.GetUserProfileActivity.Execute(ActivityExecutionContext context)     at System.Workflow.ComponentModel.ActivityExecutor`1.Execute(T activity,
ActivityExecutionContext executionContext)     at System.Workflow.ComponentModel.ActivityExecutor`1.Execute(Activity activity, ActivityExecutionContext executionContext)     at System.Workflow.ComponentModel.ActivityExecutorOperation.Run(IWorkflowCoreRuntime
workflowCoreRuntime)     at System.Workflow.Runtime.Scheduler.Run() "
When I run "get-addomain -identity [FQDN]", I noticed that our DNSRoot has a totally different name than our NetBIOSName, so I followed this article and made sure to set netbiosdomainnamesenabled to TRUE:
http://meandmysharepoint.blogspot.ca/2012/09/netbiosdomainnamesenabled-and.html
To give you an idea of our setup, our DNSRoot is "abc.domain.com" and our NetBIOSName is "TESTING"; 2 totally different names. When I run "get-addomain -identity [FQDN]", the Name field is: "abc" (just the first
part of the DNSRoot); therefore, when I look up this user's profile in Sharepoint Manage User Profiles, his account shows as "abc\username" when it should be "TESTING\username".
I did an IISReset, and I ran a Full Profile Sync. But the workflow still Errors for this user.
Any ideas how to fix this? Should I delete MySites and User Profile Service application and recreate them?
Any tips would be appreciated.
thanks!

Hi,
According to your description, my understanding is that the error occurred when sending an email to the user in workflow.
Did you delete the existing Connections before setting NetBiosDomainNamesEnabled?
If not, I recommend to delete and recreate your AD connections, then set NetBiosDomainNamesEnabled to true.
Or you can delete the original User Profile Service Application and create a new one, then set the NetBiosDomainNamesEnabled to true and start the User Profile Service Application
synchronization.
More reference:
http://social.technet.microsoft.com/wiki/contents/articles/18060.sharepoint-20xx-what-if-the-domain-netbios-name-is-different-than-the-fqdn-of-the-domain-with-user-profile.aspx
Best regards.
Thanks
Victoria Xia
TechNet Community Support

IOS device failed to get ip address on multiple wlan on the same anchor controller

Dear Experts:
in my implementation, we need 2 WLANs be served on the same anchor controller.
WLAN1: wep/40bit, integration with NAC/OOB on anchor controller for guest wlan service.
and guest account controlled by NACguest server.
WLAN2: wep/40bit, no layer3 secuirty for temporary using.
foreign controller: WiSM on v6.0.196.4 (also testing on 6.0.182.0)
anchor controller: WLC4402 on v6.0.196.4
on WLAN1:
Windows7 client get ip address correctly.
iOS (iPhone4 on 4.3.1/4.3.2, iPad2 on 4.3.1/4.3.2) can get ip address correctly on WLAN1.
WLAN2, iOS device cannot get ip address.
compare with debug message "debug clien mac" + "debug dhcp message enable"
on both foreign and anchor controller.
on foreign controller:
PM state has changed from: DHCP_REQD (7) Change state to RUN (20) last state RUN (20)
on anchor controller:
PM state always stay on: DHCP_REQD (7) Change state to DHCP_REQD (7) last state DHCP_REQD (7)
Enable/Disable DHCP Address Assignment Required is not work.
Enable/Disable DHCP proxy is not work.
Any hit this issue when get ip address failed in multiple WLANs on the same anchor controller?
In attachment log file,
DMZ.log: anchor controller on DMZ.
S3p1.log: WiSM on v6.0.182.0
S3p2.log: WiSM on v6.0.196.4
client mac: 00:1f:3b:05:33:c1, Windows7 Client
client mac: 58:55:ca:cf:d2:07, iPhone4 with 4.3.1,
WLAN1 subnet: 10.61.246.0/23
WLAN2 subnet: 10.61.248.0/23

Hi, Nicolas:
just checking the attachment for the run-config on foreign/anchor controller.
DMZ_run.config - anchor controller
s3p1_run.config - WiSM on v6.0.182.0
s3p2_run.config - WiSM on v6.0.196.4
at this moment, we have disable the wlan 10 on foreign controller, and wlan 2 on foreign controller.
Wilson...

DHCP fails to get IP address

I'm using dhcpcd to try to get a lease for an IP address, but each attempt is met with a "timed out" message. The DHCP server works for other Arch Linux installs on this network, and it works for the same laptop when using Windows. This install also fails when trying on other DHCP servers, not just on my home network. I'm not sure what it is now. I usually run iptables, but I stopped it thinking it might be the problem. I've also stopped networkmanager. I have a completely updated system, I ran pacman -Syu just now and rebooted.
I can manually set the IP address and it works fine, and I've tried dhclient instead of dhcpcd.
root@thinkpad ~# dhcpcd --release
dhcpcd[7377]: dhcpcd not running
root@thinkpad ~# dhcpcd -d eth0
dhcpcd[7378]: version 5.2.12 starting
dhcpcd[7378]: eth0: using hwaddr ....
dhcpcd[7378]: eth0: executing `/usr/lib/dhcpcd/dhcpcd-run-hooks', reason PREINIT
dhcpcd[7378]: eth0: executing `/usr/lib/dhcpcd/dhcpcd-run-hooks', reason CARRIER
dhcpcd[7378]: eth0: broadcasting for a lease
dhcpcd[7378]: eth0: sending DISCOVER (xid 0x485d8657), next in 4.24 seconds
dhcpcd[7378]: eth0: sending DISCOVER (xid 0x485d8657), next in 7.21 seconds
dhcpcd[7378]: eth0: sending DISCOVER (xid 0x485d8657), next in 15.01 seconds
dhcpcd[7378]: eth0: sending DISCOVER (xid 0x485d8657), next in 31.15 seconds
dhcpcd[7378]: timed out
# lspci -v | grep -A10 Ethernet
00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (rev 04)
Subsystem: Lenovo Device 21ce
Flags: bus master, fast devsel, latency 0, IRQ 50
Memory at d5300000 (32-bit, non-prefetchable) [size=128K]
Memory at d532b000 (32-bit, non-prefetchable) [size=4K]
I/O ports at 6040 [size=32]
Capabilities: [c8] Power Management version 2
Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [e0] PCI Advanced Features
Kernel driver in use: e1000e
Kernel modules: e1000e
and
# dmesg | grep e1000e
shows the link is up:
e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
This is my rc.conf with the comments removed:
LOCALE="en_US.UTF-8"
DAEMON_LOCALE="no"
HARDWARECLOCK="localtime"
TIMEZONE="America/Indiana/Indianapolis"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
MODULES=(fuse nvidia thinkpad_acpi)
UDEV_TIMEOUT=30
USEDMRAID="no"
USEBTRFS="no"
USELVM="no"
HOSTNAME="thinkpad"
interface=eth0
address=
netmask=
broadcast=
gateway=
NETWORK_PERSIST="no"
DAEMONS=(!hwclock syslog-ng udev @slim network iptables dbus @bluetooth networkmanager @acpid !smbnetfs crond @alsa @cpufreq)
Last edited by fester (2011-12-09 22:48:47)

Mavrick, that did not fix it.
NgoHuy... dhcpcd -C eth0 did not solve the problem either.
I think dhcpcd is broken for wlan0 too...
root@thinkpad ~# dhcpcd -C eth0
dhcpcd[8439]: version 5.2.12 starting
dhcpcd[8439]: eth0: broadcasting for a lease
dhcpcd[8439]: wlan0: broadcasting for a lease
dhcpcd[8439]: timed out
dhcpcd[8439]: forked to background, child pid 8453
I also tried
dhcpcd eth0 -C /usr/lib/dhcpcd/dhcpcd-run-hooks
and that didn't work.
I removed dhcpcd:
root@thinkpad ~# pacman -Runs dhcpcd
and reinstalled it
root@thinkpad ~# pacman -S dhcpcd
and i still get the same problem
root@thinkpad ~# dhcpcd -d eth0
dhcpcd[8590]: version 5.2.12 starting
dhcpcd[8590]: eth0: using hwaddr .....
dhcpcd[8590]: eth0: executing `/usr/lib/dhcpcd/dhcpcd-run-hooks', reason PREINIT
dhcpcd[8590]: eth0: executing `/usr/lib/dhcpcd/dhcpcd-run-hooks', reason CARRIER
dhcpcd[8590]: eth0: broadcasting for a lease
dhcpcd[8590]: eth0: sending DISCOVER (xid 0x4b4b814b), next in 3.91 seconds
dhcpcd[8590]: eth0: sending DISCOVER (xid 0x4b4b814b), next in 8.73 seconds
dhcpcd[8590]: eth0: sending DISCOVER (xid 0x4b4b814b), next in 15.68 seconds
dhcpcd[8590]: eth0: sending DISCOVER (xid 0x4b4b814b), next in 32.46 seconds
dhcpcd[8590]: timed out
Last edited by fester (2011-12-08 13:03:41)

AEX fails to get DHCP address, but works on DLink

Sorry for the long post -- I'm hoping the details will help you diagnose the problem faster in the long run.
My DLink router gets a DHCP IP address from the (Comcast) cable modem, but when I switch to the AirPort Extreme (5th gen, refurbished), it doesn't. It shows an autoconfiguration IP address of the 169.254 variety, suggesting that DHCP isn't working for the AEX. (Just fyi, my girlfriend's macbook can connect to the AEX and get 10.0.1.x IP addresses; I can ping the AEX over wifi.)
Airport Utiltiy shows a red number 2 with a single error indicating Internet failure to get IP address or something. The suggested solution is power-cycling the modem; failing that, contact the ISP. Contacting Comcast was amusing but useless...they gave me instructions for setting up AEX with a DSL modem -- twice -- without understanding my objection!
The AEX is configured for DHCP (not Static or PPPoE), and uses all stock settings (I did both a soft reset and used the Airport Utility to restore default settings...not sure if those two are the same).
I've tried power-cycling the router and cable modem numerous times, including leaving them off for 15+ minutes and leaving the AEX connected for 6+ hours. I tried using the DLink to release the DHCP reservation and then quickly switching the cable over to the AEX.
I read somewhere that resetting the "CMTS (cable modem termination system)" might help. I mentioned it to the Comcast tech support, but they didn't respond.
At this point, I'm not sure what else to try. It could be the refurbished unit is broken, but 95% of the time these sorts of things are configuration issues. (I know a fair amount about networking, but I'm new to Apple products so I could be doing something stupid.) I may try connecting the AEX to the LAN side of the DLink to see if it can get a DHCP address from that...but I'm clearly grasping at straws.
<whimpers>...Help?

Update: The AEX does get a DHCP address when connected to the LAN side of the DLink gateway. (But the AEX doesn't get one when connected directly to the cable modem. Yet the DLink gets a DHCP address when connected to the cable modem.) So...??!?!!!

Getting IP address for 2nd hand HP LaserJet 6MP?

We don’t have the user manual, because the printer is 2nd hand and did not come with one. I had read that the IP address might be on the back, but there are no IP-like numbers there.
We are trying to get this printer running with an old clamshell iBook (OS 9.2) and an Asante bridge. Some posts in other threads say the Asante won’t work with this, but if we can get an IP address for the printer then perhaps we can be sure.
I have read threads about running this printer, which is extolled as a workhorse, with 10.6 and we might try that next but it means buying another piece of equipment & maybe a new cable. We’ve already bought a used Apple Laserwriter 16/600 that turned out not to function (printed a test sheet fine then always reported a paper jam though there was none). And we bought the Asante bridge.
All this in aid of occasional use for artistic purposes, using the printer to fuse (commercial) colored lettering onto regular black lettering printed onto gold-leafed paper. We did this for many years with our Apple Laserwriter that we raised from a pup, until it just finally wore out. Other modern printers either don’t get hot enough or aren’t forgiving enough to accept paper with gold leaf.
I felt I had to mention this because so many of the other threads had replies like “Get a new printer, they’re faster and sweller“ etc. but there is not a one that will last for 15 years of regular use as our Apple Laserwriters did, and as many peoples’ old HP 6MPs seem to be doing. We threw away a Kodak printer, cheap thing clacked and vibrated like a rube goldberg machine.
Anyway, suggestions on finding IP address for this printer?

Cynthia Cheney wrote:
Thank you, Greg. I tried the reconfiguration you suggested. In the Appletalk control panel I turned Appletalk off, then in that same panel chose “Connect via:” Ethernet. It then says below “no zones available” . When I try to print I get an error message, “Laserwwriter 8 cannot be used because of an internal error, -43” (I remember error #43!) Laserwriter 8 requires Appletalk, and I turned it off but it shows as active in the Chhoser when Laserwriter 8 is selected. When I went back to the Appletalk control panel Appletalk had been reactivated, though the pulldown menu still showed “Connect via:” Ethernet and “no zones available” . Appletalk address reads Node 128 and Network 65280, which either I chose many years ago or it was automatically chosen. After checking all this, still got the same error message when trying to print.
You must have AppleTalk turned on to print to that printer _from a Mac running OS 9.2_. You must have AppleTalk turned off to print from a Mac running OS X 10.6.5.
We’re only using the clamshell iBook because we thought it would work without buying additional equipment; we got the Asante box to go with the old Apple Laserwriter purchased previously (had mechanical problems). My husband would use the HP Printer perhaps twice a month, for a few copies of fairly short text each time onto goldleafed paper, so the iBook would be adequate.
If the printer has an Ethernet port, either built in or using a DirectJet card, you should be able to print to it without the Asante Talk device. You can print to it from OS X using IPP. You can print to it from OS 9 using AppleTalk.
I had read that 10.6 ended Apple support for certain old printers, but recent reading of threads has shown me that’s not so in this case. The old HP JetDirect things are on eBay but there’s quite a variety.
Yes. And not all of them work with OS X 10.6 (or Windows 7). That would be why some of them are on eBay: the owners can't get them to work anymore and are making them someone else's problem.
One there now, is: HP JetDirect 200M LIO Internal Print Server (J6039B) Feature
Serves Ethernet and Fast Ethernet 802.3, 10BaseT and 10/100 BaseTX network types
Supports any LIO-based printer
[http://cgi.ebay.com/HP-JetDirect-200M-Print-server-/250742520371?pt=LHDefaultDomain_0&hash=item3a616b3a33#ht_485wt1158]
Anyone know if this would work with the HP LaserJet 6MP and my husband’s iMac running 10.6?
I'd look at HP's site.

Get IP Address For a user name from Terminal

hi experts,
Can any one help me in finding the IP address for a user id.I want to find the ids for multiple logons.
I tried using TERMINAL_ID_GET but it returns the IP only based on the user id.So i am getting only one IP.
I tried with CL_GUI_FRONTEND_SERVICES=>GET_IP_ADDRESS and faced a same problem.
So i want t find the IP address with respect to user id and Terminal ID.
With thanks in advance,
Syed Ibrahim . G

Hi,
just check transaction SM04 (or program RSM04000_ALV). The program determines also the terminal ID and the IP adress.
if long_usr_list = th_true.
      call 'ThUsrInfo' id 'OPCODE' field opcode_long_list
      id 'TABUSR' field usr_tabl-*sys*.
else.
    call 'ThUsrInfo' id 'OPCODE' field opcode_list
      id 'TABUSR' field usr_tabl-*sys* .
endif.
Such calls usually should not be used. But anyway. Maybe this is helpful.
Kind regards
Rudi

Failed to get proc address for GetLogicalProcessor...

Similar Messages

Maybe you are looking for