Failed to open source schema file:null Error Xform File Creation - CustomerPartyEBM
Hi All,
We are creating a Provider ABCS which is generated by AIA Service Constructor with SyncCustomerPartyList Operation in CustomerPartyEBM, We are able to compile the process susccesfully but when we create a Trasformation file with source as CustomerPartyEBM and Target has Siebel ABM, then the xsl file in design view pops up a error message saying - "Failed to open source schema file:null". When tried with other EBM's its working fine its only for CustomerPartyEBM.
Do anyone had idea on this?
Thanks a lot,
RR.
Thank you both for your responses.
You were on the right track.
I was attempting to use a 'dodgy' brand (SKY-Silver) of DVD-R for the creation of the disk set.
On changing over to TDK disks, the problem did NOT repeat.
Strangely enough, the dodgy ones worked great for creating copies of the set once it was completed.
Again, thanks to you both.
Similar Messages
-
SQLJ: unable to find input file null (Error while building EJB.jar file)
Hi,
I am working on open SQL/SQLJ with the following details
Name:Employee application(adding an employee to MAXDB through SQLJ connection)
FRONT-END:JSP/SERVLET
Middle:Stateless bean with DAO(DB connection) coming from SQLJ
Back-end:MAXDB
I have following in abc.sqlj file
#sql public context Connx with (dataSource = "java:comp/env/jdbc/SAPTSTDB")
and creating instance and adding to DB in another say xyz.sqlj file
Connx con = null;
try{
con = new Connx();
#sql [con] {insert into TMP_DB1(EMPLOYEE_ID, FIRST_NAME, LAST_NAME, EMAIL)
values(:(employeeDTO.getEmployeeId()),
:(employeeDTO.getFirstName()),
:(employeeDTO.getLastName()),
:(employeeDTO.getEmail()))};
My build has no errors..but while building EJB archive with above sqlj files, am getting following error
"SQLJ: unable to find input file null" for both sqlj files.
Anybody faced this kind of issue, pls reply back.
Thanks
parveenHi,
I am working on open SQL/SQLJ with the following details
Name:Employee application(adding an employee to MAXDB through SQLJ connection)
FRONT-END:JSP/SERVLET
Middle:Stateless bean with DAO(DB connection) coming from SQLJ
Back-end:MAXDB
I have following in abc.sqlj file
#sql public context Connx with (dataSource = "java:comp/env/jdbc/SAPTSTDB")
and creating instance and adding to DB in another say xyz.sqlj file
Connx con = null;
try{
con = new Connx();
#sql [con] {insert into TMP_DB1(EMPLOYEE_ID, FIRST_NAME, LAST_NAME, EMAIL)
values(:(employeeDTO.getEmployeeId()),
:(employeeDTO.getFirstName()),
:(employeeDTO.getLastName()),
:(employeeDTO.getEmail()))};
My build has no errors..but while building EJB archive with above sqlj files, am getting following error
"SQLJ: unable to find input file null" for both sqlj files.
Anybody faced this kind of issue, pls reply back.
Thanks
parveen -
Hi,
I have a strange issue on a Win 7 PC with Office 2010 Pro Plus 32bit installed. All applications except Access fail to open with the following error 'The operation has been cancelled due to restrictions on your computer'.
This is whilst logged on as the domain administrator. I have seen forums mentioning this effects hyperlinks within Outlook and the fix is to make IE the default and reinstall Chrome. I have tried this to no avail.
I have tried running a repair and completely re installing Office.
Any advise would be greatly received.
Thanks
EdYou have a completely different symptoms, even though the error message is the same.
Could you please try to right click and run Office application as administrator?
If it works in this mode, this issue is caused by permission setting. Double-check whether your account gets the enough permission to read/write the C drive. If no, add your account to Administrators group or directly add the security permission for your
account on Drive C.
Thanks,
Ethan Hua CHN
TechNet Community Support -
Failed to open GPIB....error message!
Hello, looking for help/advice regarding the above error message we just started receiving.
We have a Mitutoyo CMM feeding a Mitutoyo MAG-3 which is plugged into the NI-488.2 GPIB inside a Dell PC with XP platform.
Yesterday we fired up the unit and received the message.." Failed to open GPIB " and switched to offline mode. We checked all cables and found there was something not right with the GPIB Boards connection to the Dells motherboard. It appears that over time and the weight of the IEEE 4888 cable and the Dell lying on its side somehow pulled the card from its slot.
Anyway, we re-inserted the card and plugged in the driver disk but for some reason we are still getting the same error message:
Any thoughts?
Edit...I know I posted this in the wrong forum...I hope a mod will hopefully place it in its proper place!!
Thanks
KenHi Ken,
Unfortunately, we can't manually move the post from forum to forum. Feel free to repost in the correct thread and link this post to that thread.
In the mean time, I agree with Jim on the first step to take to verify that the hardware is not the problem. Do you have another card that you know is good? From the way you phrased your post, it sounds like the card used to work but stopped working yesterday. Is that right?
Ben N.
Applications Engineering
Certified LabVIEW Developer -
Hibernate fails with open source radeon driver
I have set up hibernate properly and it worked on Catalyst.
Today I switched to the open source driver and I can't put my computer in hibernate or hybrid sleep mode. When I try, both of my monitors turn off then immediately turn back on with a completely blank picture. They both report that they are getting the correct mode for them. At this point my HDD led is not blinking (I'm pretty sure the HDD itself has stopped, didn't check), and the reset button is ineffective. If I forcefully power of the PC and turn it back on it boots as if nothing has happened.
I tried linux-ice and uswsusp but neither solved my problem.
Further debugging shows that this is due to KMS (booting with nomodeset lets me hibernate successfully but I'd like to run X). Using the kernel documentation's debug procedures (https://www.kernel.org/doc/Documentatio … ugging.txt) I found that it happens when the kernel suspends devices. I can't really provide much more info unless you guys know how to squeeze it out of the kernel.
It's worth mentioning my GPU is an HD7970 (I can list other things if needed), and that the driver works perfectly fine otherwise. I do recall that hibernating worked at one point but I can't remember when it was broken as I first discovered the bug a few months ago after switching back from catalyst.
I found some guy on the Gentoo forums with the same issue (http://forums.gentoo.org/viewtopic-p-7642484.html) so it might be an upstream bug in the driver. If anyone could shed some light or tell me where to report this bug in particular (kernel ? freedesktop.org ?) I'd be grateful.
Thanks in advance.
Last edited by Streetwalker (2014-12-23 19:56:07)Alright I found the culprit. Adding radeon.dpm=0 to the kernel command line lets me hibernate on the current kernel. I lose power management but it's fine for now, will definitely check things out in the source when I have time.
-
Sender File Adapter Error reading file
Hello!
I have a problem with reading a file using the FTP adapter.
I have configured everything according to the steps of weblog "FILE to JDBC Adapter using SAP XI 3.0" (/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30).
I know the sender FTP adapter can connect to the directory and file because:
1) it has complained about wrong format in the content conversion (has been fixed)
2) when there is no file for it there to pick up, the FTP flag in the adapter monitor is green
When I put a file in the specified directory I get the following error:
- 2006-06-21 09:52:23 CDT: Retry interval started. Length: 10.000 s
- 2006-06-21 09:52:23 CDT: Error: Retrieving file 'test_file.dat' failed unexpectedly: FTPEx: Public: The system cannot find the file specified.
- 2006-06-21 09:52:20 CDT: Processing started
- 2006-06-21 09:52:13 CDT: Error: Retrieving file 'test_file.dat' failed unexpectedly: FTPEx: Public: The system cannot find the file specified.
- 2006-06-21 09:52:10 CDT: Processing started
I also get the same error if I skip the content conversion and put a "ready" XML file there.
There should be no auth problems at all. Public server, and I can log on, get, put, delete etc. Also it can apparently read it since it can complain about the content format. Anyone seen this before?
Please advise. Thanks!
NamHi Nam,
Is your User Id and User Id/Password is correct ?
Is connection mode is per file transfer in File Adapter configuration?
Also you can see the log from Visual Admin..
Regards,
Moorthy -
GUI to set file, other class to read it, file null error
Perhaps not the most informative subject for this problem. I have a GUI in which a file chooser is used to select a file to be read. Another class reads in this file, and goes on to process it. My main class sets up the GUI and then goes on to process the files in the second class.
I am having trouble, I believe, with timing. The main class sets up the GUI, it runs perfectly, and then I catch a problem (that will evolve into an error), where the file I am supposed to process is null, because I have not had a chance to use the file chooser in the GUI. I haven't had any luck finding a solution online, although if there is one (or another tutorial I missed), please feel free to pass the link(s) along. I am posting the relevant code below.
Thanks,
Danielle
public Main()
* @param args the command line arguments
public static void main(String[] args)
javax.swing.SwingUtilities.invokeLater(new Runnable()
public void run()
System.out.println("About to run create GUI method");
MGui app = new MGui();
System.out.println("declared a new MGui....");
app.createAndShowGUI();
/**Starting to get file choices and moving them into GPR Handler:
GprHandler gpr = new GprHandler();
//~ System.out.println("should be perfect????");
// }//end if
}// end main(String[] args)
}// end class MainThe GUI uses the following code for the file chooser:
private class enterFile2Action implements ActionListener
public void actionPerformed(ActionEvent evt)
JFileChooser chooser = new JFileChooser();
int rVal = chooser.showOpenDialog(enterFile1);
if(rVal == JFileChooser.APPROVE_OPTION)
inputFile2 = chooser.getSelectedFile();
PrintWriter outputStream;
file2Name = inputFile2.getName();
enterLabel2.setText(file2Name);
}Finally, the GprHandler class processes the file- reading it and such. The only relevant method, however is below.
/** taking in files*/
public boolean readFiles()
boolean nullFiles = true;
System.out.println("into method readFiles()");
if (MGui.get1Name() != null)
System.out.println("name isn't null");
file1Name = MGui.get1Name();
file1 = new File(file1Name);
if (MGui.get2Name() != null)
file2Name = MGui.get2Name();
file2 = new File(file2Name);
nullFiles = false;
}//end if
if (nullFiles)
System.out.println("one or more files is undeclared");
return false;
}//end if
else
try{
file1Reader = new FileReader(file1);
file2Reader = new FileReader(file2);
}//end try
catch (FileNotFoundException e)
System.out.println("file not found exception");
return false;
} //end catch
}//end else
return true;
}No, you're quite right. I want the GprHandler to
start when I've got something there for it to start
with. I never thought to call it from the
actionPerformed though. I think I've been listening
to too many lectures on some prof's definition of a
"proper main class".
I think I understand what you're suggesting: I
should simply remove the GprHandler part from my main
class and place it instead in the actionPerformed
methods, once the files are actually named/chosen.
Did I get that right?
Qualified yes. Does GPRHandler implement Runnable? I mean you don't want to do the processing in the swing event thread. So what you should do is in the actionPerformed create the Handler (with the file or whatever other bits it needs) and then start it.
Then it can process merrily along in a seperate thread. -
E71 sis files installation error msg "file corrupt...
I have an e71 purchased 2 months ago which was working fine until i did tried to install nokia maps updater. After that whichever sis file i try to install i get an error 'file corrupted'. How to rectify
But for doing a hard reset you should do this-
Before perfoming this please take a backup of your data.
Factory defaults-
Type *#7780# on your standby screen.
This will reset all your setting to default factory settings. User data wont be affected.
Soft reset-
Type *#7370#
This will reset the phone as well delete user data. Use when want to format the phone.
If none of these worked then you might want to do a hard reset.
For this you have to-
1. Switch off the phone.
2. Hold down the following three buttons: Green (the call answer button), * button, and '3' button.( Just in case of N78 it will be the multimedia key the small silver key on right side & for Nokia 5800XM - use the following buttons to do a hard reset, GREEN/RED/CAMERA keys pressed all at once on power up. this will only work on 5800's that have firmware version 20... and up. For Nokia N97 is SHIFT /SPACE BAR / BACKSPACE. )
3. While holding these buttons, hold the power button to switch on the phone.
4. Release the buttons when the phone shows the nokia hands logo or shows other signs of life like the language selection screen.
Please thank me by giving 'KUDOS' star. It will help me to serve you better.
Currently using N82 and 5230. Next would be N? -
If image file not exist in image path crystal report not open and give me exception error problem
Hi guys my code below show pictures for all employees
code is working but i have proplem
if image not exist in path
crystal report not open and give me exception error image file not exist in path
although the employee no found in database but if image not exist in path when loop crystal report will not open
how to ignore image files not exist in path and open report this is actually what i need
my code below as following
DataTable dt = new DataTable();
string connString = "data source=192.168.1.105; initial catalog=hrdata;uid=sa; password=1234";
using (SqlConnection con = new SqlConnection(connString))
con.Open();
SqlCommand cmd = new SqlCommand("ViewEmployeeNoRall", con);
cmd.CommandType = CommandType.StoredProcedure;
SqlDataAdapter da = new SqlDataAdapter();
da.SelectCommand = cmd;
da.Fill(dt);
foreach (DataRow dr in dt.Rows)
FileStream fs = null;
fs = new FileStream("\\\\192.168.1.105\\Personal Pictures\\" + dr[0] + ".jpg", FileMode.Open);
BinaryReader br = new BinaryReader(fs);
byte[] imgbyte = new byte[fs.Length + 1];
imgbyte = br.ReadBytes(Convert.ToInt32((fs.Length)));
dr["Image"] = imgbyte;
fs.Dispose();
ReportDocument objRpt = new Reports.CrystalReportData2();
objRpt.SetDataSource(dt);
crystalReportViewer1.ReportSource = objRpt;
crystalReportViewer1.Refresh();
and exception error as belowFirst: I created a New Column ("Image") in a datatable of the dataset and change the DataType to System.Byte()
Second : Drag And drop this image Filed Where I want.
private void LoadReport()
frmCheckWeigher rpt = new frmCheckWeigher();
CryRe_DailyBatch report = new CryRe_DailyBatch();
DataSet1TableAdapters.DataTable_DailyBatch1TableAdapter ta = new CheckWeigherReportViewer.DataSet1TableAdapters.DataTable_DailyBatch1TableAdapter();
DataSet1.DataTable_DailyBatch1DataTable table = ta.GetData(clsLogs.strStartDate_rpt, clsLogs.strBatchno_Rpt, clsLogs.cmdeviceid); // Data from Database
DataTable dt = GetImageRow(table, "Footer.Jpg");
report.SetDataSource(dt);
crv1.ReportSource = report;
crv1.Refresh();
By this Function I merge My Image data into dataTable
private DataTable GetImageRow(DataTable dt, string ImageName)
try
FileStream fs;
BinaryReader br;
if (File.Exists(AppDomain.CurrentDomain.BaseDirectory + ImageName))
fs = new FileStream(AppDomain.CurrentDomain.BaseDirectory + ImageName, FileMode.Open);
else
// if photo does not exist show the nophoto.jpg file
fs = new FileStream(AppDomain.CurrentDomain.BaseDirectory + ImageName, FileMode.Open);
// initialise the binary reader from file streamobject
br = new BinaryReader(fs);
// define the byte array of filelength
byte[] imgbyte = new byte[fs.Length + 1];
// read the bytes from the binary reader
imgbyte = br.ReadBytes(Convert.ToInt32((fs.Length)));
dt.Rows[0]["Image"] = imgbyte;
br.Close();
// close the binary reader
fs.Close();
// close the file stream
catch (Exception ex)
// error handling
MessageBox.Show("Missing " + ImageName + "or nophoto.jpg in application folder");
return dt;
// Return Datatable After Image Row Insertion
Mark as answer or vote as helpful if you find it useful | Ammar Zaied [MCP] -
File Import Error - Adobe Media Encoder, help!
I'm at a complete loss. AME worked very well for me for a long time and booting it up yesterday gave me a paralyzing error.
Upon trying to import an MOV, MP4, and later a WMV, I received the following error:
File Import Error
The file C:\Users\tj\Desktop\New folder\SH_GS_PeekPlay_DEMO_720.mp4 could not be imported. Could not open source file. Please check that file exists with correct permissions.
I've tried everything I can think of:
1. Moved the file off the server and onto my desktop.
2. Double checked file permissions (all of which I have)
3. Uninstalled AE and Premiere to try to get rid of Media Encoder.
4. Searched for a way to uninstall AME so I could put a fresh install (can't find how to do this)
5. Manually updated AME
6. Reboot (multiple times between these steps)
7. Contact customer support - no help thus far.
I'm running Windows 7 64bit with Adobe CC and AME 7.0.1.58Tried that as well.
To rule everything out, I had the files placed:
1. On company internal server
2. External Harddrive connected through Firewire
3. Internal Hard Drive (with OS)
4. Internal secondary Hard Drive (data only)
5. On Desktop (technically 1st internal drive)
I have since fixed this by uninstalling every single Adobe application (including Flash and Air) and redownloading and installing each. -
Job failing in the source system.
Hi all,
I am loading data to a data store object from a R/3 system.
The job is failing in the source system with the error - ABAP/4 processor: UNCAUGHT_EXCEPTION
Can anyone help me resolving this error?
Thanks in advance.
Regards,
Deepti.HI,
This is very generic and seems like a short dump...can you check in ST22 in the source system and see if there is any entry for ALEREMOTE check the the error log and the step where it failed??If you can analyze it and come up with the answers then people can help you here.
Also what kind of data source it is??
Was the load full or delta??
Thanks
Ajeet -
Aperture fails to open after installing Photoshop CS5
Aperture fails to open and I cannot access my photo files. This happened after I installed Photoshop CS5. I uninstalled CS5, and have not reinstalled. I uninstalled Aperture and reinstalled it but nothing changed.
I searched the forums and could not find anything similar.
Aperture is stored on my hard drive, my iBook and on an eternal hard drive as well. On my iBook there are 5 Aperture aliases (and the Aperture Library), which I don't understand.
Is there anybody with advice on this matter?
Thanks,
PatriciaPatricia,
Below some of your posts, but not all, your system configuration is listed as a Power PC G4 with 10.4.2 -- you should eliminate this info.
When you had CS5 installed, and in Aperture Preferences/Export, was Photoshop CS5 offered as a choice for external editor, or could you not get that far?
It might be that you would only need to purge the preference file for Aperture to make this work, and I would not have really expected CS5 to not work. Did you have another app for use as External Editor before installing CS5?
Ernie
Ernie -
Fail to open the group policy object. you might not have thw appropriate right
fail to open the group policy object. you might not have thw appropriate right
Hi,
Would you please let me know which account you use to open GPO? Was it a Domain Administrator? Please refer to following KB and check if can help you to troubleshoot this issue.
"Failed to Open the Group Policy Object" Error Message Occurs When You Try to Open a Policy As a Domain Administrator
Meanwhile, please open Event Viewer and check if find some relevant events.
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Dreamweaver CS6 failed to open
Dreamweaver is running on Windows 7, it was fine yesterday but today it failed to open. It is listed in the files on drive C, but no icon in Programs: Adobe Do I have to reinstall?
When DW starts acting weird, the first thing to try is Deleting Corrupted Cache in DW
http://forums.adobe.com/thread/494811
If that doesn't help, try Restore Preferences
http://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs4-cs5.html
If all else fails, use the CS Cleaner Tools below followed by a software re-install.
http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
Nancy O. -
"Failed to open cursor" while creating CTXCAT index. Bug?
Hi,
I'm trying to create a catalog index on a rather large table. And I am consistently getting the following error. When the table was half the size, the same CREATE INDEX statement worked just fine. However, when the table grows to a certain size, that statement no longer works.
I searched the whole forum and I did not find anything about this error. Am I the first to encounter it? Can this be a bug?
Any advice is greatly appreciated.
Yongtao
SQL>create index myindex on mytable(mycolumn) indextype is ctxsys.ctxcat parameters ('index set myindexset section group mysectiongroup stoplist mystoplist storage mystorage lexer mylexer');
create index myindex on mytable(mycolumn) indextype is ctxsys.ctxcat parameters ('index set myindexset section group mysectiongroup stoplist mystoplist storage mystorage lexer mylexer')
ERROR at line 1:
ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
ORA-20000: Oracle Text error:
DRG-50800: failed to open cursor
DRG-50857: oracle error in drsxsopen
ORA-00942: table or view does not exist
ORA-06512: at "CTXSYS.DRUE", line 160
ORA-06512: at "CTXSYS.CATINDEXMETHODS", line 97
Elapsed: 09:07:26.25
SQL>Looks like a bug to me. Did it error out immediately, or only after processing for some time?
Do you get the same problem without the storage clause?
Maybe you are looking for
-
Hi, Is it possible to make an asynchron communication model using one socket (on Client side)? Actually I want to read and write a socket connection simulation ally, with to separate threads. Do i then have to make any interfaces (to perform call bac
-
CNN video clip news play only sound but no video
I downloaded the latest windows player and also Quick time Flip for windows. None seems to work. Only the sound of the streaming video came through but no picture. What's wrong with my Safari? Anybody got some input what I did went wrong. Apple compu
-
Scripting: How to retrieve the value for next year
Hi Experts, Need help on HFM rules for retrieving the next year value Specificationt: Financial year values start from Apr to Mar I am bale to retrieve the values from Apr to dec, when trying to retrieve for Jan and mar getting the wrong values using
-
hi guys, could someone tell me how this code works? where does the code get the file name from? import java.io.File; import java.io.IOException; import javax.sound.sampled.AudioFormat; import javax.sound.sampled.AudioInputStream; import javax.sound.s
-
Hi I am having difficulty installing adobe pro on my computer. I am getting an error about the bit size on my computer. How do I find that information?