Failed to parse XML. (LO 26005) (LO 26000)

Hi experts,
I'm facing a problem with SAP Business Objects Dashboards. I have a document with a Liveoffice connection and when I try to preview my dashboard, I get an error - Failed to parse XML. (LO26005) (LO 26000)
I've made some research and it seems that the LiveOffice version is different from the Business Objects Web Service.
I've checked the version of LiveOffice, Dashboards and Web Service and they all seem to be the same:
LiveOffice:
Dashboards:
LaunchPad:
What am I missing here?
Thanks

Hi Amit, thanks for the quick answer.
The Live Office service is Active.
When I export the Excel file
, and then open it, it seems to lose the live office object.
But if I try to refresh the objects in Excel sheet within the Dashboard, it refreshes with no problem.
Am I missing something?

Similar Messages

LO Error 26005 Failed to parse XML

Good Afternoon,
I currently have an Xcelsius document that is attached to a Crystal Report that is in Infoview. I have it connected by using Live Office. The Crystal report basically contains a cross tab of data and is run nightly in our system. I bring back the data into Excel in order to build an Xcelsius document off of it. I havent' been using the Live Office piece all that much until recently therefore please excuse my ignorance. I setup my data connection as a Live Office connection. My server connection seems to be correct:
http://WHGCRYSTAL3:8080/dswsbobje/services/session
However, when I try to refresh the document, I get the following error:
soapenv:Server.generalException: Failed to parse XML. (LO 26005)
Any ideas as to what this could be? I have Crystal Xcelsius Enterprise 2008. The version is 5.0.0.99 and the build number is 12,0,0,121. I think I am all updated on service packs but I could be wrong. Any help is appreciated.

I downloaded all of the service packs and fixes and now I am up to date. I am still getting the error with an additional error. This is what is says:
Failed to parse XML. (LO 26005) (LO 26000)
Any other ideas as to why this is happening?

Xmlparser.parse fails when parsing xml with dtd

Has anybody used successfully called xmlparser.parse in PL/SQL
to parse an xml file with a dtd? When I try I get the following
error:
ERROR at line 1:
ORA-20100: Error occurred while parsing: Invalid argument
ORA-06512: at "SYS.XMLPARSER", line 22
ORA-06512: at "SYS.XMLPARSER", line 69
ORA-06512: at line 6
When I remove the dtd reference from the xml file it works.
(I posted this question yesterday but no responses, so I'm
trying again...)
Thanks - Dana

Please see:
http://forums.oracle.com/forums/message.jsp?id=617954
for the solution. Thanks.

ServletExec: failed to parse servletexec.xml

Hello
One of my users reported the BLS editor not displaying correctly, so after a quick investigation I figured it was a java problem and stopped the ServletExec-xMII service.
1. Now double-clicking StartServletExec.bat to start it up works, java.exe stays active and I can log into xMII with IE.
2. However, java.exe quits unexpectedly when I try to start it up it with the servlet exec service.
3. I've deleted and re-installed the servlet exec service using deletentservice.exe and installntservice.exe
4. ServletExec.log reports the following:
\[Mon Aug 11 23:26:22 CDT 2008\] ServletExec: failed to parse servletexec.xml
\[Mon Aug 11 23:26:22 CDT 2008\] ServletExec: caught exception - java.lang.NullPointerException
\[Mon Aug 11 23:26:22 CDT 2008\] java.lang.NullPointerException
I have a valid and viewable servletexec.xml file in ServletExecData identical to the file on our other systems. Does anyone know what's going on here?
xMII Product Version: 11.5.3 b66
Java Plugin Version: Sun Microsystems Inc. 1.4.2_13
Thanks

Rob, when ServletExec runs as a service, it is probably running under the "System Account" or some other account (you can check this from the Services control panel applet in Windows). What you (or your IT team) might have done is accidentally change the permissions on some folders/files so that this account cannot open the .xml file when running as a service. That's the first thing I'd check.

XML-32009: (Fatal Error) Failed to parse the input schema.

I am attempting to generate the Java classes for the attached XLM schema (JMdict_e.xsd) using the following command:
oracle.xml.jaxb.orajaxb -schema JMdict_e.xsd -targetPkg generated
which results in the error "XML-32009: (Fatal Error) Failed to parse the input schema."
I created the schema from a DTD file (http://www.csse.monash.edu.au/~jwb/jmdict_dtd_h.html) following the instructions in the example http://download.oracle.com/docs/cd/B28359_01/appdev.111/b28394/adx_j_sproc.htm#CIHICCJB
I am using version xdk_nt_10_1_0_2_0_production.
Can anyone help me with this please? Thanks.
JMdict_e.xsd
<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema">
<xs:element name="dial" type="xs:string"/>
<xs:element name="example" type="xs:string"/>
<xs:element name="upd_date" type="xs:string"/>
<xs:element name="ke_pri" type="xs:string"/>
<xs:element name="re_nokanji" type="xs:string"/>
<xs:element name="xref" type="xs:string"/>
<xs:element name="etym" type="xs:string"/>
<xs:element name="re_inf" type="xs:string"/>
<xs:element name="k_ele">
<xs:complexType>
<xs:sequence>
<xs:element ref="keb"/>
<xs:element minOccurs="0" maxOccurs="unbounded" ref="ke_inf"/>
<xs:element minOccurs="0" maxOccurs="unbounded" ref="ke_pri"/>
</xs:sequence>
</xs:complexType>
</xs:element>
<xs:element name="links">
<xs:complexType>
<xs:sequence>
<xs:element ref="link_tag"/>
<xs:element ref="link_desc"/>
<xs:element ref="link_uri"/>
</xs:sequence>
</xs:complexType>
</xs:element>
<xs:element name="lsource">
<xs:complexType>
<xs:simpleContent>
<xs:extension base="xs:string">
<xs:attribute name="lang" fixed="eng"/>
<xs:attribute name="ls_type" use="optional" type="xs:string"/>
<xs:attribute name="ls_wasei" use="optional" type="xs:string"/>
</xs:extension>
</xs:simpleContent>
</xs:complexType>
</xs:element>
<xs:element name="ent_seq" type="xs:string"/>
<xs:element name="info">
<xs:complexType>
<xs:sequence>
<xs:element minOccurs="0" maxOccurs="unbounded" ref="links"/>
<xs:element minOccurs="0" maxOccurs="unbounded" ref="bibl"/>
<xs:element minOccurs="0" maxOccurs="unbounded" ref="etym"/>
<xs:element minOccurs="0" maxOccurs="unbounded" ref="audit"/>
</xs:sequence>
</xs:complexType>
</xs:element>
<xs:element name="s_inf" type="xs:string"/>
<xs:element name="link_uri" type="xs:string"/>
<xs:element name="bib_txt" type="xs:string"/>
<xs:element name="link_tag" type="xs:string"/>
<xs:element name="bibl">
<xs:complexType>
<xs:sequence>
<xs:element minOccurs="0" ref="bib_tag"/>
<xs:element minOccurs="0" ref="bib_txt"/>
</xs:sequence>
</xs:complexType>
</xs:element>
<xs:element name="upd_detl" type="xs:string"/>
<xs:element name="ant" type="xs:string"/>
<xs:element name="ke_inf" type="xs:string"/>
<xs:element name="audit">
<xs:complexType>
<xs:sequence>
<xs:element ref="upd_date"/>
<xs:element ref="upd_detl"/>
</xs:sequence>
</xs:complexType>
</xs:element>
<xs:element name="pos" type="xs:string"/>
<xs:element name="pri" type="xs:string"/>
<xs:element name="r_ele">
<xs:complexType>
<xs:sequence>
<xs:element ref="reb"/>
<xs:element minOccurs="0" ref="re_nokanji"/>
<xs:element minOccurs="0" maxOccurs="unbounded" ref="re_restr"/>
<xs:element minOccurs="0" maxOccurs="unbounded" ref="re_inf"/>
<xs:element minOccurs="0" maxOccurs="unbounded" ref="re_pri"/>
</xs:sequence>
</xs:complexType>
</xs:element>
<xs:element name="bib_tag" type="xs:string"/>
<xs:element name="re_restr" type="xs:string"/>
<xs:element name="stagk" type="xs:string"/>
<xs:element name="sense">
<xs:complexType>
<xs:sequence>
<xs:element minOccurs="0" maxOccurs="unbounded" ref="stagk"/>
<xs:element minOccurs="0" maxOccurs="unbounded" ref="stagr"/>
<xs:element minOccurs="0" maxOccurs="unbounded" ref="pos"/>
<xs:element minOccurs="0" maxOccurs="unbounded" ref="xref"/>
<xs:element minOccurs="0" maxOccurs="unbounded" ref="ant"/>
<xs:element minOccurs="0" maxOccurs="unbounded" ref="field"/>
<xs:element minOccurs="0" maxOccurs="unbounded" ref="misc"/>
<xs:element minOccurs="0" maxOccurs="unbounded" ref="s_inf"/>
<xs:element minOccurs="0" maxOccurs="unbounded" ref="lsource"/>
<xs:element minOccurs="0" maxOccurs="unbounded" ref="dial"/>
<xs:element minOccurs="0" maxOccurs="unbounded" ref="gloss"/>
<xs:element minOccurs="0" maxOccurs="unbounded" ref="example"/>
</xs:sequence>
</xs:complexType>
</xs:element>
<xs:element name="keb" type="xs:string"/>
<xs:element name="field" type="xs:string"/>
<xs:element name="link_desc" type="xs:string"/>
<xs:element name="reb" type="xs:string"/>
<xs:element name="entry">
<xs:complexType>
<xs:sequence>
<xs:element ref="ent_seq"/>
<xs:element minOccurs="0" maxOccurs="unbounded" ref="k_ele"/>
<xs:element maxOccurs="unbounded" ref="r_ele"/>
<xs:element minOccurs="0" ref="info"/>
<xs:element maxOccurs="unbounded" ref="sense"/>
</xs:sequence>
</xs:complexType>
</xs:element>
<xs:element name="stagr" type="xs:string"/>
<xs:element name="re_pri" type="xs:string"/>
<xs:element name="gloss">
<xs:complexType mixed="true">
<xs:choice minOccurs="0" maxOccurs="unbounded">
<xs:element ref="pri"/>
</xs:choice>
<xs:attribute name="lang" fixed="eng"/>
<xs:attribute name="g_gend" use="optional" type="xs:string"/>
</xs:complexType>
</xs:element>
<xs:element name="misc" type="xs:string"/>
<xs:element name="JMdict">
<xs:complexType>
<xs:sequence>
<xs:element minOccurs="0" maxOccurs="unbounded" ref="entry"/>
</xs:sequence>
</xs:complexType>
</xs:element>
</xs:schema>

@Bhaskar (and @user11922800): You have to update the db10g/xdk to a version at least of 10.1.0.4. There were major bug fixes including XML-32009 error (bug number 3375952).
http://www.eygle.com/case/bug10104.htm
I've even tried the op's listing with my more to-date xdk without encountering any problem and it is compiled just fine.
ps: I am sure that was the hasty typo in dvohra16 post. The namespace in the op (/2001/) is correct. Encoding is still capable of resulting in some problems (I've had encounted if I recall), but that is not the problem for the issue raised in this thread.

Flash builder 4.6 : aapt tool failed - AndroidManifest.xml:33: error: Error parsing XML: not well-fo

This is happening with a "fresh" installation of flash builder 4.6 and it's driving me crazy: During "export release build" I get the error: "Error occurred while packaging the application: aapt tool failed: c:\users\alfonso\AppData\local\Temp[...]\AndroidManifest.xml:33: error: Error parsing XML: not well-formet (invalid token) This happened while importing a project build into another computer. If I create a BLANK air mobile project and I copy the application manifest on the old application EV ERYTHING WORKS FINE. As soon as I touch a single line of code in the application manifest I get the error. And also I get the error even if I UNDO the changes into the -app.xml Any help would be really appreciated Thanks Alfonso Florio

Having same issue here. In my case I'm just trying to place a local video file; hear audio, t see no video running it within Flash Builder and the ADL simulator on my Mac. It's very frustrating that everything Abobe has posted on this is targeted toward the Flash player runnung inside a damn browser... don't they realize we need a IOS solution for the 1000s of iPhones and iPads out there? Very frustrated with this.

Trying to reinstall CS5.5 Master Collection from DVD media on Windows 7 64 bit - setup.exe fails due to msxml3.dll error PDApp message [FATAL] PIM - Failed to Create XML instance : DOMDocument40 ADXML::initWithXMLPath Error:80040154

If anyone is able to solve this they are a genius (or I am doing something very stupid!)
I am trying to reinstall CS5.5 Master Collection from DVD media on Windows 7 64 bit PC but setup.exe fails due to a msxml3.dll error.
Following a big bundle of recent Windows 7 updates, I started getting 'bad image' msxml3.dll error messages when opening any CS5.5 master collection program (Eg Premiere / Photoshop / Illustrator / Dreamweaver). Following advice on some threads here I tried uninstalling and then using the Adobe CC Cleaner Tool to clean up install, then reinstalling from my original DVD media.
Whenever I try using run setup.exe from installtion disc 1 the installing fails due to 'Missing files'. I have also tried dowloading trial versions and runing setup.exe fro mthe downloaded files but i still get the same message.
I have searched the forum and others have experienced this error but none of the solutions I have found seem to be working for me - as many seem to relate to download installations whereas I am installing from original DVD media (which worked fine before on the same PC)
These are the FATAL messages from the PDApp log
12/11/2014 15:29:27 [FATAL] PIM - Failed to Create XML instance : DOMDocument40 ADXML::initWithXMLPath Error:80040154
12/11/2014 15:29:27 [FATAL] Setup - Could not initialize ADXML object
12/11/2014 15:29:27 [FATAL] Setup - Unable to initialize. Error parsing setup.xml file
The PDApp troubleshooting seems to indicate that this is caused by error in downloads but I am getting it with both original media DVD and downloads.
I have also tried using my logon (which has admin privileges) and under our main admin account - and I get the same errors.
Is a clean install of Windows 7 + CS5.5 my only option?
Any help / info / advice / solutions very much appreciated! I have spent the last 2 days trying to sort this out and seem to be getting nowhere.
Thanks.

Thanks for the reply kglad - much appreciated.
I have already tried that option (along with downloading files) as it was one of the solutions mentioned on other threads, but that also failed.
Any other ideas?

Failed to open XML document. Failed to retrieve Public ID

I have a client posting to Weblogic 6.1 server with the help of Apache
SOAP 2.2. The posting works fine if the contents of the SOAP message
is small. But when the contents of SOAP reached more than 11KB, the
following error occurs:
Error: Failed to open XML document. Failed to retrieve PUBLIC id or
SYSTEM id from the document. Decrease the number of char between the
beginning of the document and its root element.
The SOAP document looks like:
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/">
<SOAP-ENV:Body>
<mn:sMethodName xmlns:mn="sMethodURI">
<batch appid="1">
<employee>
<name>...</name>
<address>...</address>
</employee>
<employee>
<name>...</name>
<address>...</address>
</employee>
</batch>
</mn:sMethodName>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>
The Max Post Size in Weblogic is set to (-1).
The program is able to handle less than 50 items of
<employee>.....</employee>. The error occurs when more than 50 items
are used. The problem is that our application should be able to handle
more than 1000 items of <employee>....</employee>.
My questions are:
1. How should I configure weblogic to solve the problem?
2. How should I configure the deployment of Apache SOAP to solve the
problem?
Pls advise. Thanks.

One can deduce from the error message that the parser is looking for the
<?XML...?> portion of the document because that is where the SYSTEM and
PUBLIC ids are found in the document.
Peace,
Cameron Purdy
Tangosol Inc.
Tangosol Coherence: Clustered Coherent Cache for J2EE
Information at http://www.tangosol.com/
"Grace" <[email protected]> wrote in message
news:[email protected]...
>
Sorry, but I didn't get what you mean. I thought that was handled by theApache
SOAP API already? And if it couldn't see the XML document header, then whydoes
this only happens when the document size is large? It doesn't haveproblems whenever
the document size is small.
"Cameron Purdy" <[email protected]> wrote:
It's looking for the XML document header "<?XML" ....
Peace,
Cameron Purdy
Tangosol Inc.
Tangosol Coherence: Clustered Coherent Cache for J2EE
Information at http://www.tangosol.com/
"Grace" <[email protected]> wrote in message
news:[email protected]...
I have a client posting to Weblogic 6.1 server with the help of Apache
SOAP 2.2. The posting works fine if the contents of the SOAP message
is small. But when the contents of SOAP reached more than 11KB, the
following error occurs:
Error: Failed to open XML document. Failed to retrieve PUBLIC id or
SYSTEM id from the document. Decrease the number of char between the
beginning of the document and its root element.
The SOAP document looks like:
<SOAP-ENV:Envelope
xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/">
<SOAP-ENV:Body>
<mn:sMethodName xmlns:mn="sMethodURI">
<batch appid="1">
<employee>
<name>...</name>
<address>...</address>
</employee>
<employee>
<name>...</name>
<address>...</address>
</employee>
</batch>
</mn:sMethodName>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>
The Max Post Size in Weblogic is set to (-1).
The program is able to handle less than 50 items of
<employee>.....</employee>. The error occurs when more than 50 items
are used. The problem is that our application should be able to handle
more than 1000 items of <employee>....</employee>.
My questions are:
1. How should I configure weblogic to solve the problem?
2. How should I configure the deployment of Apache SOAP to solve the
problem?
Pls advise. Thanks.

How to Parse XML into String in BPEL?

Hi,
Can anyone tell me, how can I parse XML into String?
I am taking input from File Adapter, File adapter is reading that XML.
Then in assign activity i am using XPath expression(built functions) using XMLParser(),doTranslateToNative() etc.. many functions I have tried but XML is not getting parsed into String Variable.
Please help me asap.
Thanks
Shikha

Thanks a lot Eric.
I am trying this, oraext:get-content-as-string('receiveInput_Read_InputVariable','body','/ns3:orders')
but getting this error
<bpelFault><faultType>0</faultType><subLanguageExecutionFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="summary"><summary>XPath expression failed to execute. An error occurs while processing the XPath expression; the expression is oraext:get-content-as-string('receiveInput_Read_InputVariable','body','/ns3:orders'). The XPath expression failed to execute; the reason was: internal xpath error. Check the detailed root cause described in the exception message text and verify that the XPath query is correct. </summary></part><part name="code"><code>XPathExecutionError</code></part></subLanguageExecutionFault></bpelFault>

Parsing xml in clob field remove non utf-8 characters

hi all,
i have an issue where a stored procedure runs during a nightly process and parses xml contained in a clob field. There are some records that contain non-utf8(they paste characters from word)characters and therefore the parse fails when using performing an xquery select against the clob field as xmltype. I was wondering if anyone knew of a handy way to handle such a situation? I have looked around a bit and not found anything that seemed tailored to my situation, and I would like something a bit more generic than doing a replace on individual characters that i have found causing issues...thx in advance! -- jp

Hi,
Like BluShadow I'm curious to see a test case...
Depending on the way it's been created, the encoding declared in the XML prolog doesn't necessarily reflects the actual encoding of the content.
What's your database character set, and version?
Please also post the error message you get (LPX-00200 probably?).

Setting Third-Party Saxon parser for parsing xml files

Hi,
          I wish to parse certain xhtml files using saxon parser because that serves our needs. In order to that in tomcat, I used to use the following code -
          System.getProperties().setProperty("javax.xml.parsers.SAXParserFactory","com.icl.saxon.aelfred.SAXParserFactoryImpl");
          System.getProperties().setProperty("javax.xml.transform.TransformerFactory","com.icl.saxon.TransformerFactoryImpl");
          However this does not work in Weblogic 8.1 SP5. Which means, it actually ignores the settings and uses the default parser (which fails to parse the documents).
          I noticed that in weblogic I need to include these in the weblogic-application.xml located under the application/META-INF folder. I update the file with the following -
          <xml>
          <parser-factory>
          <saxparser-factory>com.icl.saxon.aelfred.SAXParserFactoryImpl</saxparser-factory>
          <transformer-factory>com.icl.saxon.TransformerFactoryImpl</transformer-factory>
          </parser-factory>
          </xml>
          Everything was fine and the documents were parsed but for every server start up, I got an error message -
          <Apr 4, 2006 10:34:43 AM EDT> <Error> <HTTP> <BEA-101216> <Servlet: "action" failed to preload on startup in Web application: "HarvesterWeb".
          javax.servlet.UnavailableException: Parsing error processing resource path
          at com.bea.wlw.netui.pageflow.AutoRegisterActionServlet.initModuleConfig
          (AutoRegisterActionServlet.java:416)
          at org.apache.struts.action.ActionServlet.init(ActionServlet.java:470)
          at com.bea.wlw.netui.pageflow.AutoRegisterActionServlet.init(AutoRegisterActionServlet.java:103)
          at javax.servlet.GenericServlet.init(GenericServlet.java:258)
          at com.bea.wlw.netui.pageflow.AutoRegisterActionServlet.init(AutoRegisterActionServlet.java:109)
          at com.bea.wlw.netui.pageflow.PageFlowActionServlet.init(PageFlowActionServlet.java:107)
          at weblogic.servlet.internal.ServletStubImpl$ServletInitAction.run(ServletStubImpl.java:1094)
          at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
          at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
          at weblogic.servlet.internal.ServletStubImpl.createServlet(ServletStubImpl.java:970)
          at weblogic.servlet.internal.ServletStubImpl.createInstances(ServletStubImpl.java:949)
          at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:888)
          at weblogic.servlet.internal.WebAppServletContext.preloadServlet(WebAppServletContext.java:3430)
          at weblogic.servlet.internal.WebAppServletContext.preloadServlets(WebAppServletContext.java:3375)
          at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:3356)
          at weblogic.servlet.internal.WebAppServletContext.setStarted(WebAppServletContext.java:6208)
          at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:864)
          at weblogic.j2ee.J2EEApplicationContainer.start(J2EEApplicationContainer.java:2134)
          at weblogic.j2ee.J2EEApplicationContainer.activate(J2EEApplicationContainer.java:2175)
          at weblogic.j2ee.J2EEApplicationContainer.activate(J2EEApplicationContainer.java:2122)
          at weblogic.management.deploy.slave.SlaveDeployer$Application.setActivation(SlaveDeployer.java:3099)
          at weblogic.management.deploy.slave.SlaveDeployer.setActivationStateForAllApplications(SlaveDeployer.java:1768)
          at weblogic.management.deploy.slave.SlaveDeployer.resume(SlaveDeployer.java:351)
          at weblogic.management.deploy.DeploymentManagerServerLifeCycleImpl.resume(DeploymentManagerServerLifeCycleImpl.java:229)
          at weblogic.t3.srvr.SubsystemManager.resume(SubsystemManager.java:136)
          at weblogic.t3.srvr.T3Srvr.resume(T3Srvr.java:965)
          at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:360)
          at weblogic.Server.main(Server.java:32)
          >
          And the server needs to be restarted after every couple of hits(particularly failures).
          Also, my other applications won't deploy throwing the same stack trace.
          At the end of all this, I get this message - Not sure if they are related but
          log4j:WARN No appenders could be found for logger (org.apache.commons.digester.Digester).
          log4j:WARN Please initialize the log4j system properly.
          Any ideas or anyone run into these kind of situations? Moderators, can you please help?

Try the following.
          1. Keep the 3rd party jars in your WLS classpath and not within your ear.
          2. Create an XML Registry through admin console.
          Services->XML.
          3. Enter appropriate values for the following
          Document Builder Factory:
          SAX Parser Factory:
          Transformer Factory:
          4. Restart WLS.
          Refer to this link. http://e-docs.bea.com/wls/docs81/ConsoleHelp/domain_xmlregistrytable.html
          cheers,
          Dips

OSB download 250 MG file results in error Error parsing XML: {err}FORG0005

Hi,
Using OSB 11.1.1.5. I have service to download files from Oracle ECM. Running into an issue where the file size is over 250 MB service is failing. Giving me an error
OSB Replace action failed updating variable "body": Error parsing XML: {err}FORG0005: expected exactly one item, got 0 items
I have service callout to get the binary content of the file and it's taking over 5 minutes and then this error. I also set Read Timeout and Connection Timeout to 20 seconds at the business service level
but looks like it's not taking that timeout values and still waiting over 5 minutes before it dies. My JTA Timeout is set to 12 minutes. After service callout I have a log to write the output but it's not even getting there and throwing that error above
How can I trap that kind of errors. How can I set timeout at service level i.e. if after 1 minute if the file is still downloading close the connection etc.
I don't want to have some many open threads in the back ground as this service is being called in a loop to download files. Smaller files like 30 MG downloads fine but the larger ones are not.
I have a error hndler at the root level but the error is not trapped there either. Looks like system errors are not getting trapped.
So Just wondering if OSB is suitable to download that huge files.
Thanks

The reason for the error is the xquery is not able to find the values in the input... Check the input and namespaces...
Try...
<ns1:value1>{ data($addition1/ns0:value1) }</ns1:value1>
<ns1:value2>{ data($addition1/ns0:value2) }</ns1:value2>Cheers,
Vlad

OSB transformation error- BEA-382513- Error parsing XML

Hi Gurus -
I am struggling to fix one OSB Xquery transformation error
<con:errorCode>BEA-382513</con:errorCode>
<con:reason>OSB Replace action failed updating variable "body": Error parsing XML: {err}FORG0005: expected exactly one item, got 0 items
I am passing SIL formatted data to this transformation an expecting a transformation but its keep on failing, I have tested the transformation and thats looking good.
This is my replace operation where I am doing transformation.
Replace [ node contents ] of [ ./* ]
in [ body ] with
XQuery Resource: TestProject/Common/Transformation/XQJMS2DBTransformation
Variable Names And Bindings:
commonInterfaceLayout1 - $body/*:CommonInterfaceLayout
transformation file
(:: pragma bea:global-element-parameter parameter="$commonInterfaceLayout1" element="ns0:CommonInterfaceLayout" location="../../Common/Schema/CommonInterfaceLayout.xsd" ::)
(:: pragma bea:global-element-return element="ns1:EaiAuditCollection" location="../../Common/Schema/XSD_InsertEAIAuditDBTable.xsd" ::)
declare namespace ns1 = "http://xmlns.oracle.com/pcbpel/adapter/db/top/InsertEAIAuditDBTable";
declare namespace ns0 = "http://eai.fpl.com/schema/CommonInterfaceLayout";
declare namespace xf = "http://tempuri.org/ErrorHandlingR1V1/XQJMS2DB/";
declare function xf:XQJMS2DB($commonInterfaceLayout1 as element(ns0:CommonInterfaceLayout))
as element(ns1:EaiAuditCollection) {
<ns1:EaiAuditCollection>
<ns1:EaiAudit>
<ns1:eaiAuditId></ns1:eaiAuditId>
<ns1:messageId>{ data($commonInterfaceLayout1/ns0:Header/ns0:MessageId) }</ns1:messageId>
<ns1:messageDate>{ data($commonInterfaceLayout1/ns0:Header/ns0:MessageReceivedDate) }</ns1:messageDate>
<ns1:messageType>{ data($commonInterfaceLayout1/ns0:Header/ns0:MessageType) }</ns1:messageType>
<ns1:messageSource>{ data($commonInterfaceLayout1/ns0:Header/ns0:MessageSource) }</ns1:messageSource>
<ns1:messageTarget>{ data($commonInterfaceLayout1/ns0:Header/ns0:MessageTarget) }</ns1:messageTarget>
<ns1:appUniqId>{ data($commonInterfaceLayout1/ns0:Header/ns0:ApplicationUniqueId) }</ns1:appUniqId>
<ns1:payload>{ data($commonInterfaceLayout1/ns0:Body) }</ns1:payload>
<ns1:componentName>{ data($commonInterfaceLayout1/ns0:Header/ns0:ComponentName) }</ns1:componentName>
<ns1:clientId>{ data($commonInterfaceLayout1/ns0:Header/ns0:ClientId) }</ns1:clientId>
<ns1:createDate>{ fn:current-date() }</ns1:createDate>
<ns1:processFlag></ns1:processFlag>
</ns1:EaiAudit>
</ns1:EaiAuditCollection>
declare variable $commonInterfaceLayout1 as element(ns0:CommonInterfaceLayout) external;
xf:XQJMS2DB($commonInterfaceLayout1)
pls advice whats wrong I am doing here.
Edited by: KumarB on Feb 7, 2013 9:56 PM

update - I dont see this error any more but transformation is not happening. as a result of transformation, i get same message as output .. no change in it.

Does JMS parse xml content in TextMessages

          Hi
          I am working on WLS 6.1sp2 and I am using jms TextMessage type of message to
          send XML messages from one subsystem to another. I have added an XML registry
          for my version of XML parser. Now I do not have any entries for the entity declarations
          nor for the parser entries in the registry.
          When I send in an XML message in a TextMessage envelope I find the following
          errors in the log.
          <Jun 9, 2003 3:56:57 PM PDT> <Error> <XML> <Failed to parse given XML document.
          Failed to retrieve PUBLIC id. The root element is required in a well-formed docu
          ment.>
          <Jun 9, 2003 3:56:57 PM PDT> <Error> <XML> <Failed to open XML document. Failed
          to retrieve PUBLIC id or SYSTEM id from the document. Decrease the number of cha
          r between the beginning of the document and its root element.>
          <Jun 9, 2003 3:56:57 PM PDT> <Error> <XML> <Failed to parse given XML document.
          Failed to retrieve SYSTEM id. The root element is required in a well-formed docu
          ment.>
          <Jun 9, 2003 3:56:57 PM PDT> <Error> <XML> <Failed to open XML document. Failed
          to retrieve PUBLIC id or SYSTEM id from the document. Decrease the number of cha
          r between the beginning of the document and its root element.>
          <Jun 9, 2003 3:56:57 PM PDT> <Error> <XML> <Failed to parse given XML document.
          Failed to retrieve root tag. The root element is required in a well-formed docum
          ent.>
          <Jun 9, 2003 3:56:57 PM PDT> <Error> <XML> <Could not instantiate factory class
          specified in the Server console. Invalid parameters: at least one of publicId,
          s
          ystemId, rootTag must be non-null>
          [ChangeAwareClassLoader] : Name is : META-INF/services/org.apache.xerces.xni.par
          ser.XMLParserConfiguration
          <Jun 9, 2003 3:56:57 PM PDT> <Error> <XML> <Failed to open XML document. Failed
          to retrieve PUBLIC id or SYSTEM id from the document. Decrease the number of cha
          r between the beginning of the document and its root element.>
          <Jun 9, 2003 3:56:57 PM PDT> <Error> <XML> <Failed to parse given XML document.
          Failed to retrieve PUBLIC id. The root element is required in a well-formed docu
          ment.>
          Now from the logs I understand that the message is being parsed and since the
          parser does not find any PUBLIC ID or SYSTEM id it dumps the error, since I am
          using schemas there is none of the PUBLIC and SYSTEM ids in my xml, also this
          is not logged by any component of my subsystems, this is a weblogic XML Service
          log and when I trace through the code I find that it comes up after the first
          subsystem sends the message and before the second subsystem receives it.
          The question then is does JMS parse XML content in TextMessages and if so how
          can I disable that parsing?
          Thanks
          Sandeep


JMS does not automatically parse TextMessages. Check the XML declaration in
          your application's deployment descriptors. That's often the source of this
          error.
          FYI, you can use XMLMessage for xml payloads. As far as I can remember, the
          XMLMessage is an extension of the TextMessage with xml parsing built in.
          Adarsh
          "Sandeep Nayak" <[email protected]> wrote in message
          news:[email protected]...
          >
          > Hi
          >
          > I am working on WLS 6.1sp2 and I am using jms TextMessage type of message
          to
          > send XML messages from one subsystem to another. I have added an XML
          registry
          > for my version of XML parser. Now I do not have any entries for the entity
          declarations
          > nor for the parser entries in the registry.
          >
          > When I send in an XML message in a TextMessage envelope I find the
          following
          > errors in the log.
          >
          > <Jun 9, 2003 3:56:57 PM PDT> <Error> <XML> <Failed to parse given XML
          document.
          > Failed to retrieve PUBLIC id. The root element is required in a
          well-formed docu
          > ment.>
          > <Jun 9, 2003 3:56:57 PM PDT> <Error> <XML> <Failed to open XML document.
          Failed
          > to retrieve PUBLIC id or SYSTEM id from the document. Decrease the number
          of cha
          > r between the beginning of the document and its root element.>
          > <Jun 9, 2003 3:56:57 PM PDT> <Error> <XML> <Failed to parse given XML
          document.
          > Failed to retrieve SYSTEM id. The root element is required in a
          well-formed docu
          > ment.>
          > <Jun 9, 2003 3:56:57 PM PDT> <Error> <XML> <Failed to open XML document.
          Failed
          > to retrieve PUBLIC id or SYSTEM id from the document. Decrease the number
          of cha
          > r between the beginning of the document and its root element.>
          > <Jun 9, 2003 3:56:57 PM PDT> <Error> <XML> <Failed to parse given XML
          document.
          > Failed to retrieve root tag. The root element is required in a well-formed
          docum
          > ent.>
          > <Jun 9, 2003 3:56:57 PM PDT> <Error> <XML> <Could not instantiate factory
          class
          > specified in the Server console. Invalid parameters: at least one of
          publicId,
          > s
          > ystemId, rootTag must be non-null>
          > [ChangeAwareClassLoader] : Name is :
          META-INF/services/org.apache.xerces.xni.par
          > ser.XMLParserConfiguration
          > <Jun 9, 2003 3:56:57 PM PDT> <Error> <XML> <Failed to open XML document.
          Failed
          > to retrieve PUBLIC id or SYSTEM id from the document. Decrease the number
          of cha
          > r between the beginning of the document and its root element.>
          > <Jun 9, 2003 3:56:57 PM PDT> <Error> <XML> <Failed to parse given XML
          document.
          > Failed to retrieve PUBLIC id. The root element is required in a
          well-formed docu
          > ment.>
          >
          > Now from the logs I understand that the message is being parsed and since
          the
          > parser does not find any PUBLIC ID or SYSTEM id it dumps the error, since
          I am
          > using schemas there is none of the PUBLIC and SYSTEM ids in my xml, also
          this
          > is not logged by any component of my subsystems, this is a weblogic XML
          Service
          > log and when I trace through the code I find that it comes up after the
          first
          > subsystem sends the message and before the second subsystem receives it.
          >
          > The question then is does JMS parse XML content in TextMessages and if so
          how
          > can I disable that parsing?
          >
          > Thanks
          >
          > Sandeep

AzureDiagnostics fails after role udpate with no changes to configuration, error "Failed to parse the WAD config file"

Windows event log shows AzureDiagnostics errors "Failed to parse the WAD config file" and warning "
No certficate with given thumbprint found in the certificate store. Thumbprint:" and
System.ArgumentNullException: Value cannot be null.
Parameter name: s
   at System.IO.StringReader..ctor(String s)
   at Microsoft.Azure.Plugins.Plugin.WadConfigValidator`1.Validate(String configString, String schemaPath, StringBuilder builder)
   at Microsoft.Azure.Plugins.Plugin.WadConfigValidator`1.Initialize(String configString, String schemaPath)
   at Microsoft.Azure.Plugins.Plugin.WadParser.Parse()
Also tried a different deployment on a different subscription, same issue, and this one gets stuck in 'create' state with no roles showing up in 'instances' section for quite some time. Are Cloud Services even maintained by Microsoft
anymore? Seems that they are second class citizens to VMs, no updates, no new portal, no new features, often can't update single role without updating all roles, etc.

i am facing same error : here is the log:
DiagnosticsPlugin.exe Information: 0 : [3/19/2015 6:00:39 PM] Starting DiagnosticPlugin.exe DiagnosticPlugin-ShutdownEvent DiagnosticPlugin-TotalShutdownEvent -wadVer1v3
DiagnosticsPlugin.exe Information: 0 : [3/19/2015 6:00:39 PM] Starting DiagnosticsPlugin
DiagnosticsPlugin.exe Information: 0 : [3/19/2015 6:00:39 PM] Checking VM Type
DiagnosticsPlugin.exe Information: 0 : [3/19/2015 6:00:39 PM] File HandlerEnvironment.json not found. Extension set to PAAS
DiagnosticsPlugin.exe Information: 0 : [3/19/2015 6:00:39 PM] RcfFileName: C:\Config\881bb2e524c04870b4e993fd8fefb7d8.881bb2e524c04870b4e993fd8fefb7d8.WorkerRole1_IN_0.13.xml
DiagnosticsPlugin.exe Information: 0 : [3/19/2015 6:00:39 PM] RoleInstanceId: WorkerRole1_IN_0; DeploymentId: 881bb2e524c04870b4e993fd8fefb7d8; RoleName: WorkerRole1
DiagnosticsPlugin.exe Information: 0 : [3/19/2015 6:00:39 PM] Checking VM Type
DiagnosticsPlugin.exe Information: 0 : [3/19/2015 6:00:39 PM] File HandlerEnvironment.json not found. Extension set to PAAS
DiagnosticsPlugin.exe Information: 0 : [3/19/2015 6:00:39 PM] Store Size: 4096
DiagnosticsPlugin.exe Information: 0 : [3/19/2015 6:00:39 PM] Reading XML configuration file
DiagnosticsPlugin.exe Information: 0 : [3/19/2015 6:00:39 PM] Will use thumbprint
DiagnosticsPlugin.exe Information: 0 : [3/19/2015 6:00:39 PM] Decrypting private configuration
DiagnosticsPlugin.exe Warning: 0 : [3/19/2015 6:00:39 PM] No certficate with given thumbprint found in the certificate store. Thumbprint:
DiagnosticsPlugin.exe Information: 0 : [3/19/2015 6:00:39 PM] Retrying after 30 seconds. Retry attempt 1
DiagnosticsPlugin.exe Warning: 0 : [3/19/2015 6:01:09 PM] No certficate with given thumbprint found in the certificate store. Thumbprint:
DiagnosticsPlugin.exe Information: 0 : [3/19/2015 6:01:09 PM] Retrying after 30 seconds. Retry attempt 2
DiagnosticsPlugin.exe Warning: 0 : [3/19/2015 6:01:39 PM] No certficate with given thumbprint found in the certificate store. Thumbprint:
DiagnosticsPlugin.exe Information: 0 : [3/19/2015 6:01:39 PM] Retrying after 30 seconds. Retry attempt 3
DiagnosticsPlugin.exe Error: 0 : [3/19/2015 6:02:09 PM] System.Security.Cryptography.CryptographicException: The enveloped-data message does not contain the specified recipient.
at System.Security.Cryptography.Pkcs.EnvelopedCms.DecryptContent(RecipientInfoCollection recipientInfos, X509Certificate2Collection extraStore)
at Microsoft.Azure.Plugins.Diagnostics.dll.PluginConfigurationSettingsProvider.DecryptPrivateConfig(String encryptedConfig)
DiagnosticsPlugin.exe Information: 0 : [3/19/2015 6:02:09 PM] WadCfg is provided in initial configuration. Using that to initialize Diagnostics.
DiagnosticsPlugin.exe Information: 0 : [3/19/2015 6:02:09 PM] <PublicConfig xmlns="http://schemas.microsoft.com/ServiceHosting/2010/10/DiagnosticsConfiguration">
<WadCfg>
<DiagnosticMonitorConfiguration overallQuotaInMB="4096">
<DiagnosticInfrastructureLogs />
<Directories scheduledTransferPeriod="PT1M">
<IISLogs containerName="wad-iis-logfiles" />
<FailedRequestLogs containerName="wad-failedrequestlogs" />
</Directories>
<PerformanceCounters scheduledTransferPeriod="PT1M">
<PerformanceCounterConfiguration counterSpecifier="\Memory\Available MBytes" sampleRate="PT3M" />
<PerformanceCounterConfiguration counterSpecifier="\Web Service(_Total)\ISAPI Extension Requests/sec" sampleRate="PT3M" />
<PerformanceCounterConfiguration counterSpecifier="\Web Service(_Total)\Bytes Total/Sec" sampleRate="PT3M" />
<PerformanceCounterConfiguration counterSpecifier="\ASP.NET Applications(__Total__)\Requests/Sec" sampleRate="PT3M" />
<PerformanceCounterConfiguration counterSpecifier="\ASP.NET Applications(__Total__)\Errors Total/Sec" sampleRate="PT3M" />
<PerformanceCounterConfiguration counterSpecifier="\ASP.NET\Requests Queued" sampleRate="PT3M" />
<PerformanceCounterConfiguration counterSpecifier="\ASP.NET\Requests Rejected" sampleRate="PT3M" />
<PerformanceCounterConfiguration counterSpecifier="\Processor(_Total)\% Processor Time" sampleRate="PT3M" />
</PerformanceCounters>
<WindowsEventLog scheduledTransferPeriod="PT1M">
<DataSource name="Application!*" />
<DataSource name="System!*" />
</WindowsEventLog>
<CrashDumps dumpType="Full">
<CrashDumpConfiguration processName="WaAppAgent.exe" />
<CrashDumpConfiguration processName="WaIISHost.exe" />
<CrashDumpConfiguration processName="WindowsAzureGuestAgent.exe" />
<CrashDumpConfiguration processName="WaWorkerHost.exe" />
<CrashDumpConfiguration processName="DiagnosticsAgent.exe" />
<CrashDumpConfiguration processName="w3wp.exe" />
</CrashDumps>
<Logs scheduledTransferPeriod="PT1M" scheduledTransferLogLevelFilter="Verbose" />
</DiagnosticMonitorConfiguration>
</WadCfg>
<StorageAccount>vinaystorageaccounttest</StorageAccount>
</PublicConfig>
DiagnosticsPlugin.exe Information: 0 : [3/19/2015 6:02:09 PM] Private setting is loaded
DiagnosticsPlugin.exe Error: 0 : [3/19/2015 6:02:09 PM] System.ArgumentNullException: Value cannot be null.
Parameter name: s
at System.IO.StringReader..ctor(String s)
at Microsoft.Azure.Plugins.Plugin.WadConfigValidator`1.Validate(String configString, String schemaPath, StringBuilder builder)
at Microsoft.Azure.Plugins.Plugin.WadConfigValidator`1.Initialize(String configString, String schemaPath)
at Microsoft.Azure.Plugins.Plugin.WadParser.Parse()
DiagnosticsPlugin.exe Error: 0 : [3/19/2015 6:02:09 PM] Failed to parse the WAD config file
DiagnosticsPlugin.exe Information: 0 : [3/19/2015 6:02:09 PM] DiagnosticPlugin.exe exit with code -106

Failed to parse XML. (LO 26005) (LO 26000)

Similar Messages

Maybe you are looking for