Failed to read PREINST6.swm error code 020150-20-00000000

I have made three attempts to create the recovery disks from an out-of-the box Satellite E205-S1904. Each time, the Recover Media Center gets about 80% complete on the first DVD burn, judging from the status bar, and then crashes with the message: Failed to read the following file: D:\ZZImages\ZZImages\PREINST6.SUM Error code: 020150-20-00000000 How can I recover/work around so that I can burn the recovery disks? Thanks. --Steve

More digging on the Internet indicated this error might be due to bad media. Tried a new batch and different brand of DVDs and the Recovery disks burned as advertised.

Similar Messages

Toshiba Recovery Media Creator Error Code 020150-20-00000000 (Satallite L755-S5308)

We just received 2 - Toshiba Satallite L755-S5308 Laptops over the thanksgiving holiday from Best Buy and the first thing we normally do after powering up the laptops is to create our recovery disc sets to DVD's. However, both laptops are giving the same error message on both machines at the same point in the creation of the Recovery DVD Disc 4 when using the Toshiba Recovery Media Creator. Please See Eror Message Below:
Failed To Read The Following File.
D:\ZZImages\ZZImages\Preinst18.swm
(Error Code: 020150-20-00000000)
If you are getting this error message then you will not be able to restore your laptop factory software and operating system (Windows 7 Home Premium 64-bit)

You could create an image of the entire HDD onto another drive, but this can be a headache for a lot of users and would require specialized hardware and a HDD enclosure. As such, it's not a feasible solution.
Oh,come now. You can buy 'specialized hardware' -- an HDD enclosure -- from a widely known online computer store for $12.99 with free shipping, and a spare plain old Seagate 500 GB hard drive (nothing very special about it, except that it costs more since the flooding in Thailand) running at 7200 rpm from a different widely known online computer store for $99.99 (shipping extra). Seagate gives away its branded version of Acronis True image for free. It is not that hard to use. I believe the L755 has a 500 GB 5400 rpm hard disc drive, so this Seagate may make the laptop run faster under some conditions. Creating an image of the laptop HDD onto this 2nd HDD mounted in the enclosure may take hours, but consider the only other alternative, below:
Anyone who thinks that solution is not feasible can just wait until their one and only hard disc drive fails or develops a software problem. Without usable recovery discs, the machine must be dropped off or mailed to a service center. Compare the waiting and the expense to have someone else solve that kind of problem with the effort and expense of preventing it. If you don't mind being without your computer for a few days or weeks, go for the simple way.
By the way, even the best home-burned optical discs are prone to develop unexpected failures after they are created. I've never had a factory pressed optical disc properly stored develop a late failure. If these work out of the box, they work a couple of years later. The technologies behind a home-burned disc and a factory-pressed disc are different.
Getting back to my original point, should your 1st HDD fail, and should you have a 2nd HDD with the cloned image of the 1st HDD, your recovery takes as long as it takes to remove HDD #1, installed HDD #2, and reboot your laptop, involving about 5 minutes of your time and perhaps a small screwdriver. You can test whether or not your cloned backup works the same way, by installing HDD #2 and seeing if it works. If you only have a single HDD, there is no good way to test your recovery media, since they overwrite your original HDD.

I have been exporting lightroom webgaleries to my iweb site without any problem. Suddenly I get the error message "finder can't complete the operation because some data can't be read or written" - error code -36 - thoughts?

i have been exporting lightroom web galleries to my iweb site without any problem. Suddenly I get the error message "finder can't complete the operation because some data can't be read or written" - error code -36 - and the move to the sites folder on my idisk fails..... thoughts?

Try this community: MobileMe on my Mac: MobileMe: Apple Support Communities.
And you can continue to use iWeb for some time to come. The following will explain:
It's now confirmed that iWeb and iDVD have been discontinued by Apple. This is evidenced by the fact that new Macs are shipping with iLife 11 installed but without iWeb and iDVD.
On June 30, 2012 MobileMe will be shutdown. HOWEVER, iWeb will still continue to work but without the following:
Features No Longer Available Once MobileMe is Discontinued:
◼ Password protection
◼ Blog and photo comments
◼ Blog search
◼ Hit counter
◼ MobileMe Gallery
All of these features can be replaced with 3rd party options.
I found that if I published my site to a folder on my hard drive and then uploaded with a 3rd party FTP client subscriptions to slideshows and the RSS feed were broken. If I published directly from iWeb to the FPT server those two features continued to work correctly.
There's another problem and that's with iWeb's popup slideshows. Once the MMe servers are no longer online the popup slideshow buttons will not display their images.
Click to view full size
However, Roddy McKay and I have figured out a way to modify existing sites with those slideshows and iWeb itself so that those images will display as expected once MobileMe servers are gone. How to is described in this tutorial: #26 - How to Modify iWeb So Popup Slideshows Will Work After MobileMe is Discontinued.
In addition the iLife suite of applications offered on disc is now a discontinued product and the remaining supported iApps will only be available thru the App Store from now on.
HOWEVER, the iLife 11 boxed version that is still currently available at the online Apple Store (Store button at the top of the page) and those copies still on the shelves of retailers will include iWeb and iDVD.

Trying to copy iPhoto Library to external hard drive for backup. Error message: The Finder can't complete the operation because some data in "iPhoto Library" can't be read or written (Error code -36).

Trying to copy iPhoto Library to external hard drive for backup. Error message: The Finder can't complete the operation because some data in "iPhoto Library" can't be read or written (Error code -36).

That code is
-36
ioErr
I/O error (bummers)
Make sure the EHD is formatted OS X Extended (journaled) and run Disk Utilty on the EHD and repair the disk. If that fails to help I'd try the following:
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button,
navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option
In the next window name the new library and select the external HD as the location of the newly rebild library.
Click on the Create button.
Note 1: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost.
Note 2: Your current library will be left untouched for further attempts at a fix if so desired.
OT

TS3694 itunes error (-42404) -- Okay, getting a little frustrated (but then again, who isn't a little frustrated?). I recently tried to upgrade iTunes software a few days ago but it failed. What is (-42404) error code mean?

itunes error (-42404) -- Okay, getting a little frustrated (but then again, who isn't a little frustrated?). I recently tried to upgrade iTunes software a few days ago but it failed. What is (-42404) error code mean?
I get the following:
(1) iTunes - The software required for communicating with iPods and mobile phones was not installed correctly. Do you want iTunes to try to repair this for you? Yes/No
(2) iTunes - The software required for communicating with iPods and mobile phones could not be repaired. Please reinstall iTunes if you wish to use these devices. OK
(3) iTunes error message - A required iTunes component is not installed. Please repair or reinstall iTunes. (-42404) OK
(4) iTunes error message - We could not complete your iTunes Store request. A required iTunes component is not installed. Please repair or reinstall iTunes. (-42404) There is an error in the iTunes Store. Please try again later. OK
Okay, so I decided to uninstall and reinstall. Funny, iTunes can be found in a program folder, but it does not show up in the programs list. I tried to look for it using the command prompt ("wmic" --> "product get name") but iTunes is not there either. Doesn't even show up in the registry to try to uninstall.
I just want to "properly" uninstall and reinstall iTunes (plus the other usual suspects, Apple Software Update, Apple Mobile Device Support, Bonjour, & Apple Application Support). If anyone out there has any suggestions, please help! (I'm running Windows Vista -- don't judge/laugh) :-)

Okay, feeling like an idiot, but will share so others don't have to. I rebooted my computer and that enabled iTunes to reappear in the programs list. Don't appear to be having the same problems as before (no error messages now). Problem solved!

Failed to evaluate package P01000XX, Error code 0x80070002

I have a package that got deleted while it still had all the DP's listed under content location, so now I have every site flagged with a big yellow warning.
Not really a big deal but before I could just look at all 54 secondary's at a glance and see green but now I have to select each one to check its status.
Anyone know how to remove it like it never existing so my update status points will go back to green?

Hi,
Does the smsdpmon.log still say "Failed to evaluate package P01000F3, Error code 0x80070002" now?
Please check the blog below.
If the package is not on the site, you must remove the package from WMI on the distribution point. The namespace to connect to is root\sccmdp.
Troubleshooting Content Mismatch Warnings on a Distribution Point in
System Center 2012 Configuration Manager
Best Regards,
Joyce
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

The last failed audio CD burn had error code 4900.

Has anyone come across what error code 4900 refers to? I have searched throughout the forum, but found no specific answer. This error occurs every time I try to burn a disc using a CD-R. Any help would be greatly appreciated. Thanks in advance.
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
HP Pavilion 061 DQ177A-ABA A450N
iTunes 7.0.2.16
CD Driver 2.0.6.1
CD Driver DLL 2.0.6.1
LowerFilters: PxHelp20 (2.0.0.0), CDR4_XP (7.1.0.188), PFC (2.5.0.204), AFS2K (3.1.21.0),
UpperFilters: Cdralw2k (7.1.0.188), GEARAspiWDM (2.0.6.1),
Video Driver: NVIDIA GeForce FX 5200 \GeForce FX 5200
IDE\DiskST3160021A_____________________________3.06___, Bus Type ATA, Bus Address [0,0]
USBSTOR\DiskGenericUSB_CF_Reader__1.01, Bus Type USB
USBSTOR\DiskGenericUSB_MS_Reader__1.03, Bus Type USB
USBSTOR\DiskGenericUSB_SD_Reader__1.00, Bus Type USB
USBSTOR\DiskGenericUSB_SM_Reader__1.02, Bus Type USB
IDE\CdRomRICOHDVD+RW_MP5240A____________________1.11___, Bus Type ATA, Bus Address [0,0]
IDE\CdRomSAMSUNGCD-ROM_SC-148C__________________B100___, Bus Type ATA, Bus Address [1,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is an administrator.
I: RICOH DVD+RW MP5240A, Rev 1.11
Drive is empty.
P: SAMSUNG CD-ROM SC-148C, Rev B100
Drive is empty.
The last failed audio CD burn had error code 4900(0x00001324). It happened on drive I: RICOH DVD+RW MP5240A on CDR media at speed 8X.

bump2.

"The last failed audio CD burn had error code -128(0xffffff80)"

Prior to the iTunes 7.0 update I had no problems burning discs from iTunes. Now, after the update I can begin burning, seem to burn a few tracks, before the whole system crashes causing a reboot. The drivers are up to date, and the drive is functioning correctly. Here is the diagnostics report:
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
Hewlett-Packard Pavilion zx5000 (DS476U#ABA)
iTunes 7.0.0.70
CD Driver 2.0.6.0
CD Driver DLL 2.0.6.0
LowerFilters: PxHelp20 (2.0.0.0),
UpperFilters: GEARAspiWDM (2.0.6.0),
Video Driver: MOBILITY RADEON 9200\MOBILITY RADEON 9200
IDE\DiskWDCWD800UE-22HCT0_____________________09.07D09, Bus Type ATA, Bus Address [0,0]
IDE\CdRomHL-DT-STDVD+RW_GCA-4040N_______________1.17___, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is an administrator.
D: HL-DT-ST DVD+RW GCA-4040N, Rev 1.17
Drive is empty.
The last failed audio CD burn had error code -128(0xffffff80). It happened on drive D: HL-DT-ST DVD+RW GCA-4040N on CDR media at speed 0X.

I guess I should also ask, is anyone else having their system crash after part way through burning an audio disc? And better yet, has anyone had this problem and then been able to fix it? Or, does anyone know how to resolve this if it can be resolved with the current 7.0 build.

"the finder cannot complete the operation because some data in [name of iMovie file] could not be read or written (Error Code 26)

Hi all,
I have an iMovie project in iMovie HD 6.0.3. (Mac OS 10.5.8)
It plays, but I cannot copy the file (including saving it to a flash drive). I get either a message
"the finder cannot complete the operation because some data in [name of
iMovie file] could not be read or written (Error Code 26)" or the
message "A project file is missing. The file [name of the QuickTime
movie inside the project.dv] couldn't be opened and is being skipped."
This happened suddenly, I was able to save a backup version numerous
times while working on the project.
I followed some of Karl Petersen's advise on apple discussions. I opened
the package contents, and everything seems to be there. The source file
(original QuickTime movie) is there and can be opened and played. I
replaced the current project file with the backup in the package
contents, but that did not change anything. I was able to export the
movie timeline into a new project as a single clip, but would like to be
able to copy the current project.
Thanks for any ideas..

Make sure all drives are formatted as "Mac OS Extended". (Journalling preferred, but not necessary).

Error sending emails to Internet: Failed to connect. Winsock error code: 10051

Our exchange 2013 CU2 (CAS+MBX, Win2012) was sending emails to Internet using another server (a kerio email server) and outbound internet email was working as expected.
We have now removed the Kerio server, I also removed the kerio_Send_Connector I was using to send emails to internet and I also changed the email domain in Exchange to be authoritative. I created a new Internet send connector with default values, but the same
bad behavior is present.
Our Exchange 2013 receives emails internally and externally with no problems. The problems are sending emails to Internet. I am suspecting something in the firewall but i need to do some more research.
If from the same Exchange server I telnet to an Internet email host:25 I do get the smtp banner but as soon as I start typing HELO/EHLO I get disconnected and errors are logged.
Errors when sending emails to any emails address (this is from an email sent to google, all others are the same):
Remote Server at aspmx3.googlemail.com (74.125.136.26) returned '400 4.4.7 Message delayed'
7/1/14 9:52:44 a. m. - Remote Server at aspmx3.googlemail.com (74.125.136.26) returned '441 4.4.1 Error encountered while communicating with primary target IP address: "Failed to connect. Winsock error code: 10051, Win32 error code: 10051." Attempted
failover to alternate host, but that did not succeed. Either there are no alternate hosts, or delivery failed to all alternate hosts. The last endpoint attempted was 74.125.136.26:25'
I cannot find any references from such Winsock error that are related to Exchange 2013.
So far all email is being queued at the Exchange Server 2013. I am afraid to install CU3 and make things worse.
Thanks for your comments.

Just check if the receive connector settings are set to fine
check the send connector properties and see whether it is set to use DNS to route emails through external DNS/Internal DNS or smart host .
Do a telnet to external domain like hotmail,yahoo and see at what transaction you are getting an error
Enable verbose logging, restart the transport service and check if you get the same error in the verbose logs as well
Get in touch with the ISP and see if the port 25 for Outbound SMTP is opened.
YOu can check if SMTP Proxy is enabled in the firewall. If so disable the SMTP proxy in the firewall and check.
Good Luck!!
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question.
That will encourage me - and others - to take time out to help you.
Regards,
Sathish

The finder can't complete the operation because some data in "VIDEO_TS.BUP "can't be read or written (error code-36)

the finder can't complete the operation because some data in "VIDEO_TS.BUP "can't be read or written (error code-36)

I faced the same problem and i fixed it by going to applications - utility - disk utility and fixing the errors.

While transferring several files to the G-Raid, the G-Raid device locks up with the following warnings: "The Finder can't complete the operation because some data in (whatever file) can't be read or written (Error code - 36)."

While transferring several files to the G-Raid, the G-Raid device locks up with the following warnings: "The Finder can't complete the operation because some data in (whatever file) can't be read or written (Error code - 36).” NOt sure this is a G-Raid problem, can anyone help?

This is likely a problem with the drive itself. This error indicates unspecified I/O errors with the drive, which can be from a hardware fault, or a formatting issue. If the drive has valuable data on it, then try connecting it to another PC to get the data off, and then try fully partitioning and formatting the drive with Disk Utility. If this corrects the error then you should be able to use the drive again as it was likely a formatting issue, but if the problem continues then it is likely a hardware fault and the best solution is to be safe and replace the drive.

Error Code: 0E01D0-3D-00000000

I recently bought a Satellite P205D-S7439 and I'm tring to make a set of recovery discs with the Recovery Disc Creator but i get Error Code: 0E01D0-3D-00000000 when I try to make disc 1 of the application disc set. I've tried 3 different brands of blank media and I tried cleaning the drive. Both System Recovery DVD's came out ok and cd 2 of the application set came out too.

Satellite P205D-S7439
Try reinstalling this utility..
Toshiba Disc Creator for Windows Vista/XP
util_disc_creator_26207A.exe
-Jerry

Backup failed for Windows 2008 R2 error code 2147755009 event id 19

Hi Guys,
I'm doing Windows server backup to a NAS drive via iSCSI target, and everything works fine until a few weeks back where my backup started to fail with the above event ID and error code. Description provided by Microsoft doesn't help either as it simply doesn't
explain much at all. (http://technet.microsoft.com/en-us/library/cc734218%28v=ws.10%29.aspx)
I updated the firmware of the NAS drive, make sure iSCSI connection wasn't dropping, and i even manage to do a backup manually via the "Backup Once" action. But when it comes to scheduled backup, it keeps on failing. I'm pretty sure the NAS drive
is working fine as well as iSCSI connection since i can do a backup manually.
Any idea guys?

Hi,
Could you please provide more detailed information about the error? You could refer to the article below to check if it helps:
Event ID 19: The backup operation attempted at '‎specific date' has failed to start, error code '2155348032'
https://bluesolutions.zendesk.com/entries/23345746-Event-ID-19-The-backup-operation-attempted-at-specific-date-has-failed-to-start-error-code-215534803
Please Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Failed AAF Import from PT: Error Code -39, bad references. Any clues?

I received an AAF file (and associated 96khz 24bit aif's) exported from ProTools. Several of the aifs are 28kb files that Finder's Get Info says have a duration of 0:00. Earlier on in the project I successfully imported an OMF export; this AAF was updating four tracks.
When I important the aaf into Logic—whether into a new or pre-existing project—regions appear at what look to be the right time indexes, and they appear to be the right length, but the waveform preview never fills in. All of the regions except one appear to be tied to a single audio file; the many of those very short files are apparently in a "Sample accurate edit.2" region that I can't find elsewhere in the project.
When I try to play the project, I quickly get a popup stating: "Error code -39 was returned by the Audio driver."
It looks like a similar issue was raised here: https://logicprohelp.com/forum/viewtopic.php?f=1&t=88286
Any idea what's going on here? Is this a Logic importing AAF issue, a PT exporting AAF issue, or something else?

One of the problems PT has.. is that it has issues exporting AAF files if the file name or path.. contains what Avid describes as "Foreign Characters" (Or to be more accurate... They spell it 'Foreing Characters'!!)
http://avid.force.com/pkb/articles/en_US/Troubleshooting/en369691?retURL=%2Farti cles%2Fen_US%2Ffaq%2Fen414251&popup=true
This particular 'feature' has been one of many long standing bugs with PT and AAF exporting... Just do a quick google for "failed aaf export from Pro tools" without the quotes.. to see what I mean....

Failed to read PREINST6.swm error code 020150-20-00000000

Similar Messages

Maybe you are looking for