Failed to start ranking update due to this error - Authoritative Pages

Hello together,
i always get an error if i add an Authoritative Web Page and use the Option "Relevance Ranking Analytics".
The error is:
Failed to start ranking update due to this error: Failed to connect to system manager. SystemManagerLocations: net.tcp://SERVER/64BFD2/AdminComponent1/Management
Does anyone have a solution?
The Search Service component´s are running!
Best Regards
Darius.K

Hi! I had this issue and I was able to resolve it by retrying from an application server (I was trying to run from an Index server and that's not where the admin component was located in my topology)

Similar Messages

I cannot sync my iphone with my computer. The error message says the ipone sync fails to start,how do I correct this?

I cannot sync my iphone with my computer. The error message says the ipone sync fails to start,how do I correct this?

try a reset on your iphone
make sure you have latest version of itunes
try updating your iphone over wi-fi before connecting to your itunes
reconnect ,try other usb ports
good luck

TS3694 trying to update software on my iphone 4s- "could not be updated due to unknown error" (6). what does this mean. my phone appears to be in a near complete state of update...

Not sure what to do. finally decided to upgrate software on my phone. installed itunes on my new laptop. plugged by phone in and started process. nearing the end i received an error message stating that the phone "could not be updated due to unknown error" (6). HELP!
the phone itself appears to be in mid update....

This describes error 6:
Errors related to third-party security software
Error 2, 4 (or -4), 6, 1000, and 9006
Follow the steps to troubleshoot security software. Often, uninstalling third-party security software will resolve these errors.
There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. An incorrectly set default packet size can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
Verify that access to ports 80 and 443 are allowed on your network.
Verify that communication to albert.apple.com or phobos.apple.com isn't blocked by a firewall or other Internet security setting.
Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under "Advanced steps > Rename, move, or delete the iOS software file (.ipsw)" below for file locations.
Restore your device while connected to a different network.
Restore using a different computer.

My screen blacks out and computer starts up again due to an error. Anyone any suggestions what could case this?

My screen blacks out and computer starts up again due to an error. Anyone any suggestions what could case this?

Hello nattygrimm,
I was looking into the issue you are describing and found a great resource to try and fix the issue without having to re install the OS. It is an article called Mac OS X: How to troubleshoot a software issue found here: http://support.apple.com/kb/HT1199.
I recommend starting here:
The first and easiest test to try is to see if the issue affects a different user account on your Mac. Each user account has customized preferences and other items stored in its home directory. You'll first need to create an additional user if one does not already exist (follow steps a-h below). Then, log out of the current user and test the issue in the new user account.
If this resolves the issue, there may be an issue with a file in the home directory of the original user account.
From the Apple menu, choose System Preferences.
From the View menu, choose Accounts (or choose Users if using Mac OS X v10.2 or earlier).
Click "+" (or click New User if using Mac OS X v10.2 or earlier).
Give the new user a name and short name.
Mac OS X v10.3 or earlier only: Click the Password tab, and give the user a password.
Mac OS X v10.3 or earlier only: Click Security.
Select the checkbox for "Allow user to administer this computer". This makes the user account an administrator.
Click OK, or quit System Preferences.
Work your way down the article as needed.
All the best,
Sterling

I cannot update my iPad and notes it cannot be updated due to unknown error (6). I have not yet updated my Macbook to Yosemite (which I do not intend to do so yet) so would this be the problem and if so, how can I update the iPad?

I cannot update my iPad and notes it cannot be updated due to unknown error (6). I have not yet updated my Macbook to Yosemite (which I do not intend to do so yet) so would this be the problem and if so, how can I update the iPad?
Thanks,
glhiker

Hi glhiker,
I understand that you may be having some issues with your ability to update your iPad. Here is an article that references your error code and can help you take some steps to resolve it:
Resolve iOS update and restore errors - Apple Support
http://support.apple.com/en-us/TS3694
Check your security software
Related errors: 2, 4, 6, 9, 1000, 1611, 9006. Sometimes security software can prevent your device from communicating with either the Apple update server or with your device.
Check your security software and settings to make sure that they aren't preventing a connection to the Apple servers.
Thanks for coming to the Apple Support Communities!
Regards,
Braden

Anyone else have the issue where, after the 8,3 upgrade, you cannot access more than 1 exchange account on your iPhone? This is annoying to me as I need to access 4 daily and cannot due to this error.

Anyone else have the issue where, after the 8,3 upgrade, you cannot access more than 1 exchange account on your iPhone? This is annoying to me as I need to access 4 daily and cannot due to this error.
The first one, my private home email, works fine. With the other 3, I get the message "Cannot get mail: The connection to the server failed"
All were working fine before the 8.3 upgrade. I did try the old trick of making one minor change on the account and resaving, but that did not change anything. I even deleted my work account and re-entered it from scratch, but again, sadly, no luck. For the time being, I am successfully getting the email via IMAP, but this ***** compared to exchange. Anyone have any idea what is happening or if a fix is in the works?

Well, the one set up on exchange 2k3 is now working fine, although no changes were made on either the iPhone or the exchange side, so that's fun, but it still is throwing errors when connecting to the other 2 exchange accounts. The common elements are that both non-functioning exchange accounts are google apps for business accounts. So is one of the ones that's working, by the way. The settings on both accounts are the same as the one that's working, and both worked fine before the 8.3 upgrade. I have no issue accessing both of these accounts on my ipad which is currently on 8.2.x. If it's not the iphone OS at fault, I'm at a loss as to what it could be.

Auto Deployment Rule download failed (0X87d20417) Failed to download the update from internet. Error = 16389

Hi there,
I have massive problems with Auto Deployment Rules.
I get the Error from above.
ruleengine.log says:
Failed to download the update from internet. Error = 16389 SMS_RULE_ENGINE 3/11/2015 11:41:57 AM 5608 (0x15E8)
Failed to download ContentID 16936340 for UpdateID 16953422. Error code = 16389 SMS_RULE_ENGINE 3/11/2015 11:41:57 AM 5608 (0x15E8)
Failed to download any update SMS_RULE_ENGINE 3/11/2015 11:41:58 AM 5608 (0x15E8)
Failed to download update contents. SMS_RULE_ENGINE 3/11/2015 11:41:58 AM 5608 (0x15E8)
No new update was added to the package. Package "00000116" would not be updated. SMS_RULE_ENGINE 3/11/2015 11:41:58 AM 5608 (0x15E8)
Failed to run the DownloadAction for the AutoDeployment. SMS_RULE_ENGINE 3/11/2015 11:41:58 AM 5608 (0x15E8)
STATMSG: ID=8706 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_RULE_ENGINE" SYS=NE-SCCM-02.services.internal SITE=000 PID=3392 TID=5608 GMTDATE=Mi Mrz 11 10:41:58.606 2015 ISTR0="SMS Rule Engine" ISTR1="Failed to download one or more content files" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 SMS_RULE_ENGINE 3/11/2015 11:41:58 AM 5608 (0x15E8)
CRuleHandler: Enforcing Actions for Rule 16777227 failed!
Failed to download the update from internet. Error = 16389 SMS_RULE_ENGINE 3/11/2015 11:51:03 AM 5608 (0x15E8)
Failed to download ContentID 16936340 for UpdateID 16953422. Error code = 16389 SMS_RULE_ENGINE 3/11/2015 11:51:03 AM 5608 (0x15E8)
CRuleHandler: Enforcing Actions for Rule 16777230 failed! SMS_RULE_ENGINE 3/11/2015 11:51:10 AM 5608 (0x15E8)
CRuleHandler: ResetRulesAndCleanUp() SMS_RULE_ENGINE 3/11/2015 11:51:10 AM 5608 (0x15E8)
Updated Failure Information for Rule: 16777226 SMS_RULE_ENGINE 3/11/2015 11:51:10 AM 5608 (0x15E8)
Updated Failure Information for Rule: 16777227 SMS_RULE_ENGINE 3/11/2015 11:51:10 AM 5608 (0x15E8)
Updated Failure Information for Rule: 16777230 SMS_RULE_ENGINE 3/11/2015 11:51:10 AM 5608 (0x15E8)
whereas in WSUSCTRL.log i get:
System.Net.WebException: The underlying connection was closed: A connection that was expected to be kept alive was closed by the server. ---> System.IO.IOException: Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host. ---> System.Net.Sockets.SocketException: An existing connection was forcibly closed by the remote host~~ at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size)~~ --- End of inner exception stack trace ---~~ at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size)~~ at System.Net.PooledStream.Read(Byte[] buffer, Int32 offset, Int32 size)~~ at System.Net.Connection.SyncRead(HttpWebRequest request, Boolean userRetrievedStream, Boolean probeRead)~~ --- End of inner exception stack trace ---~~ at Microsoft.UpdateServices.Administration.AdminProxy.CreateUpdateServer(Object[] args)~~ at Microsoft.UpdateServices.Administration.AdminProxy.GetUpdateServer()~~ at Microsoft.SystemsManagementServer.WSUS.WSUSServer.ConnectToWSUSServer(String ServerName, Boolean UseSSL, Int32 PortNumber)
System.Net.WebException: The request failed with HTTP status 503: Service Unavailable.~~ at Microsoft.UpdateServices.Administration.AdminProxy.CreateUpdateServer(Object[] args)~~ at Microsoft.UpdateServices.Administration.AdminProxy.GetUpdateServer()~~ at Microsoft.SystemsManagementServer.WSUS.WSUSServer.ConnectToWSUSServer(String ServerName, Boolean UseSSL, Int32 PortNumber) SMS_WSUS_CONTROL_MANAGER 3/11/2015 11:57:04 AM 6032 (0x1790)
Failed to set WSUS Local Configuration. Will retry configuration in 1 minutes SMS_WSUS_CONTROL_MANAGER 3/11/2015 11:57:04 AM 6032 (0x1790)
Attempting connection to local WSUS server SMS_WSUS_CONTROL_MANAGER 3/11/2015 11:57:04 AM 6032 (0x1790)
System.Net.WebException: The request failed with HTTP status 503: Service Unavailable.~~ at Microsoft.UpdateServices.Administration.AdminProxy.CreateUpdateServer(Object[] args)~~ at Microsoft.UpdateServices.Administration.AdminProxy.GetUpdateServer()~~ at Microsoft.SystemsManagementServer.WSUS.WSUSServer.ConnectToWSUSServer(String ServerName, Boolean UseSSL, Int32 PortNumber) SMS_WSUS_CONTROL_MANAGER 3/11/2015 11:57:04 AM 6032 (0x1790)
Failures reported during periodic health check by the WSUS Server XYZ. Will retry check in 1 minutes SMS_WSUS_CONTROL_MANAGER 3/11/2015 11:57:04 AM 6032 (0x1790)
ooGDoo

There only is Patchdownloader.log under
\\SCCMSERVER\C$\Program Files\SMS_CCM\LOGS\Patchdownloader.log
Do you mean this Log?
Failed to move \\teg.teda\admin\SCCM\SU\Baseline\Patches\e7b56916-3356-4f59-ac71-be7ef2159050.1 to \\teg.teda\admin\SCCM\SU\Baseline\Patches\e7b56916-3356-4f59-ac71-be7ef2159050, error 64 Software Updates Patch Downloader 3/11/2015 11:50:33 AM 5608 (0x15E8)
Will retry in 10000ms Software Updates Patch Downloader 3/11/2015 11:50:33 AM 5608 (0x15E8)
Failed to move \\teg.teda\admin\SCCM\SU\Baseline\Patches\e7b56916-3356-4f59-ac71-be7ef2159050.1 to \\teg.teda\admin\SCCM\SU\Baseline\Patches\e7b56916-3356-4f59-ac71-be7ef2159050, error 5 Software Updates Patch Downloader 3/11/2015 11:50:43 AM 5608 (0x15E8)
Will retry in 10000ms Software Updates Patch Downloader 3/11/2015 11:50:43 AM 5608 (0x15E8)
Failed to move \\teg.teda\admin\SCCM\SU\Baseline\Patches\e7b56916-3356-4f59-ac71-be7ef2159050.1 to \\teg.teda\admin\SCCM\SU\Baseline\Patches\e7b56916-3356-4f59-ac71-be7ef2159050, error 5 Software Updates Patch Downloader 3/11/2015 11:50:53 AM 5608 (0x15E8)
Will retry in 10000ms Software Updates Patch Downloader 3/11/2015 11:50:53 AM 5608 (0x15E8)
Failed to move \\teg.teda\admin\SCCM\SU\Baseline\Patches\e7b56916-3356-4f59-ac71-be7ef2159050.1 to \\teg.teda\admin\SCCM\SU\Baseline\Patches\e7b56916-3356-4f59-ac71-be7ef2159050, error 5 Software Updates Patch Downloader 3/11/2015 11:51:03 AM 5608 (0x15E8)
MoveFile() failed to rename \\teg.teda\admin\SCCM\SU\Baseline\Patches\e7b56916-3356-4f59-ac71-be7ef2159050.1 to \\teg.teda\admin\SCCM\SU\Baseline\Patches\e7b56916-3356-4f59-ac71-be7ef2159050 with GetLastError() = 5 Software Updates Patch Downloader 3/11/2015 11:51:03 AM 5608 (0x15E8)
ERROR: DownloadContentFiles() failed with hr=0x80004005 Software Updates Patch Downloader
ooGDoo

Query machine 'server' has been taken out of rotation due to this error: The object is not initialzed?

Hi, in my MOSS 2007 farm getting below Search errors frequently:
1.“EventID: 0x00002736 (10038) - Query machine 'server xyz' has been taken out of rotation due to this error: The object is not initialized. 0x8004180b. It will be retried in 15 seconds”
2. Retry of query machine 'server abc' has failed with error: The content index is corrupt.
In this Farm, one Application server works as an index server and two WFE servers work as Query servers.
So currently resolving the issue resetting the crawl content and running full crawl. I also changed the Index file location frequently on both the WFE servers but frequently error is coming.
Please tell me what to do.

Hi Prakash,
It seems like your existing index partition is corrupted, please remove initial index partition and create new.
Please refer below article, this will give you some idea to troubleshot this issue further:
http://daxdilip.blogspot.in/2012/06/troubleshooting-sharepoint-search.html
If my contribution helps you, please click Mark As Answer on that post and
Vote as Helpful
Thanks, ShankarSingh(MCP)

TS1424 Every time I start up iTunes I get this error message. "A required iTunes component is not installed. Please repair or reinstall iTunes (-42404). I have researched this on Google and I have not read of any solution to this. Please advise.

Him
Every time I start up iTunes I get this error message. "A required iTunes component is not installed. Please repair or reinstall iTunes (-42404)." I have researched this on Google and I have not read of any solution. Please advise.

Here you go: http://support.apple.com/kb/HT1923
There are three steps so make sure you follow all of them. They are:
remove iTunes and everthing related to it
verify everything is really removed
reinstall iTunes.

HT201210 trying to update my phone and it says cannot update due to unknow error any help

i was trying to update my iphone 4 and it says cannot update due to unknow error any help ?

Hey alyreed22,
Thanks for the question. I understand you are having issues updating to iOS 7. The following articles may help you resolve the error message:
iOS: Troubleshooting update and restore issues
http://support.apple.com/kb/TS1275
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
Thanks,
Matt M.

AD4J: Unable to start Heap Dump due to OS Error

When Java 'Heap Dump' is requested, the following message is shown:
Unable to start Heap Dump due to OS Error.
Details of the monitored JDK and application server are given below:
JDK: Sun JDK 1.4.2_08 on Solaris 9
Application Server: WebLogic 8.1 SP4
1. What could be the possible cause? No errors are logged in jamserv/logs/error_log. Is there any way to enable detailed logging?
2. Each time the heap dump is requested, a file of the format heapdump<n> gets created in /tmp (e.g. /tmp/heapdump12.txt). If you see the file, it contains the following:
a) a line containing summary of the heap usage, and
b) stack traces of all the threads
Thanks!

Wrong Forum?

TS3212 I had to re download Itunes, i get 2 errors; "failed to start MSVCR80.dll not found" and "error 7, windows error 126"

iTunes will now download because of 2 errors; "failed to start MSVCR80.dll not found" and "error 7, windows error 126" using microsoft.

Click here and follow the instructions.
(98918)

Unable to return a borrowed ebook due to this error. E_BAD_LOAN_ID. What gives?

Unable to return a borrowed ebook due to this error. E_BAD_LOAN_ID. What gives?

Please contact your library.
Thanks

TS1609 "apple device service failes to start.verify ou have sufficient privileges"error message when installing

"Apple device service fails to start.Verify you have sufficient privileges"error message when installing

I think i know what you are talking about. I think its just the case that you must take out your device and then plug it back in again and it should work hopefully. Hope that helps . If not im sorry

Hi i'm using firefox nightly after today's flash player update im facing this error "style error #2134" when playinf videos on some websites tell me about inf

Hi, i'm using firefox nightly.
After today's flash player update im facing this error "style error #2134" when playinf videos on some websites. Tell me about info i have to provide to solve this problem. Thanks

Hello,
I am not a Flash developer, but based on my search, this particular error 'style error #2134' means that the Flash video / game that you are viewing is not able to store data on the local storage (your machine).
Can you please check the setting described in the Adobe KB [http://helpx.adobe.com/flash-player/kb/error-2134-cannot-create-sharedobject.html Enable Storage for Flash Player], to see if this helps in resolving the issue.
Thank you

Failed to start ranking update due to this error - Authoritative Pages

Similar Messages

Maybe you are looking for