Failed to start the SASL connection (every 10 minutes)

I have been recently seeing the following console message at 10 minute intervals:
8/23/12 8:46:44.368 AM Mail: [<_LibSasl2SASLClient: 0x7fd1cbe048f0> mechanism: PLAIN security layer: no] Failed to start the SASL connection
SASL(-1): generic failure:
I use Apple mail connected to a Verizon FIOS internet account using SSL for both incoming (port 995) and outgoing (port 465) per Verizon requirements. Mail does work fine in both directions, just the annoying log messages every 10 minutes.
Any ideas?,  thanks in advance
Larry

I just began searching the same message. Mail has been taking a little while to quit. The message you referred to seemed to be triggered about the time Mail was quiting. Along with this one:
9/2/12 9:03:15.900 PM Mail: [<_LibSasl2SASLClient: 0x7f8c02597300> mechanism: CRAM-MD5 security layer: no] Failed a step of SASL authentication
SASL(-1): generic failure:

Similar Messages

  • Javax.resource.ResourceException: Failed to start the connection

    I have created the JMS bridge in Weblogic10.0 to connect with MQ server, I am getting error when startingup the weblogic server. Below the error
    ####<28-Mar-2009 10:56:25 o'clock GMT> <Info> <MessagingBridge> <clx25ao02> <aauat100-02> <[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1238237785804> <BEA-200042> <Bridge MQ_TO_JMS_1 failed to connect to the source destination and will try again in 20 seconds. This could be a temporary condition unless the messages repeat several times. (javax.resource.ResourceException: Failed to start the connection)>
    I deployed the JMS adaptor also in weblogic10.0.
    Could you please tell me the reason for the error?

    A problem occurred with a Messaging Bridge between two JMS topics running in two Managed
    Servers in the same domain, running on the same machine. As the Messaging Bridge was being
    started during WebLogic Server startup, it threw the following warning message. Messages
    could not be forwarded.
    Analysis revealed that the bridge failed to create the message listener because it was
    configured for durable topics and there was no JMS store available. The Bridge encountered an
    internal error when trying to log the resource exception so the customer was not able to tell
    why the bridge was failing.
    The problem was resolved by a code change to allow the bridge to throw the correct resource
    exception. Now, the correct exception is logged by the bridge.

  • Windows 8 Hyper-V - Virtual Machine Management Service failed to start the virtual machine

    I have Hyper-v running on Dell Precision T3600 with Windows 8 OS.  I am trying to start a VM (called Windows8VM) to install Windows 8 in the hyper-v virtual machine, but I keep getting the following message:
    "Windows8VM" failed to start.
    Failed to start the virtual machine "Windows8VM" because one of the Hyper-V components is not running.
    "Windows8VM" failed to start.  (Virtual machine ID D670D3BB-9AE2-0453D-9191-EA6EFC242A9C)
    The Virtual Machine Management Services failed to start the virtual machine "Windows8VM" because one of the Hyper-V components is not running.
    I have turned the hyper-v feature on in the "Turn Windows feature on or off.  The BIOS has virtualization enable.  Help!!! driving me nuts for a week now.
    Nick :(

    Okay,  I turned off hyper-v, went to bios and enabled Intel TXT(LT-SX) Configuration.  Made sure that both Virtualization and VT for Direct I/0 are on.  Next, I turned on Hyper-V and I create a brand new Virtual Machine call Windows8 and had
    the DVD point to Windows8 ISO file on hard drive.  When I clicked on start, it stayed in the Starting status mode for about 5 minutes.  Then of course it failed.  I looked at the Hyper-V-VMMS log and here is what it output:
    Log Name: Microsoft-Windows-Hyper-V-VMMS/Admin
    1) Error: The virtualization infrastructure driver (VID) is not running.
    2) Info:  Found a certificate for server authentication. Remote access to virtual machines is now possible.
    3) Info:  Successfully started the Virtual Machine migration connection manager.
    4) Info:  Virtual Machine Management service is started successfully.
    5) Info:  The WMI provider 'VmmsWmiInstanceAndMethodProvider' has started.
    6) Info:  The WMI provider 'VmmsWmiEventProvider' has started.
    7) Info:  The WMI provider 'VmmsWmiInstanceAndMethodProvider' has started.
    8) Info:  The WMI provider 'VmmsWmiEventProvider' has started.
    9) Info:  The Integration Services Setup Disk image was successfully updated.
    10) Error: The virtual machine bus is not running.
    11) Error: 'Virtual Machine Bus' driver required by the Virtual Machine Management service is not installed or is disabled. Check your settings or try reinstalling the Hyper-V role.
    12) Error: 'Storage Virtualization Service Provider' driver required by the Virtual Machine Management service is not installed or is disabled. Check your settings or try reinstalling the Hyper-V role.
    13) Error:  The Virtual Machine Management Service failed to start the virtual machine 'Window8' because one of the Hyper-V components is not running (Virtual machine ID 2B393AF4-7B7E-4243-805B-23C09D20F4FB).
    14) Error:  'Window8' failed to start. (Virtual machine ID 2B393AF4-7B7E-4243-805B-23C09D20F4FB)
    Nick

  • Why does my mouse keep losing connection every minute

    why does my mouse keep losing connection every minute, its not the batteries

    I'm having the same issue.  Every so often it loses connection then re establishes. This goes on repeatedly.
    If you change batteries while the computer is still active then it takes for ever to re connect.
    Can't wait until someone replies to your question.

  • ORA-12500   Tns listner failed to start the dedicated server process.

    Hi all,
    I am getting below error message when i am trying to connect to database through db console.
    OS-Windows sever
    Database-10GR1
    ORA-12500 Tns listner failed to start the dedicated server process.
    Kindly help me out..
    Thanks in advance
    Edited by: rajaryan on Sep 17, 2009 4:46 AM

    Hi all,
    I am getting below error message when i am trying to connect to database through db console.
    OS-Windows sever
    Database-10GR1
    ORA-12500 Tns listner failed to start the dedicated server process.
    Kindly help me out..
    Thanks in advance
    Edited by: rajaryan on Sep 17, 2009 4:46 AMYou are running short of resources. Check v$resource_limit. You may also use the orastack utility for minimizing the memory utilized by oracle.
    http://hrivera99.blogspot.com/2008/01/orastack.html
    Regards,
    S.K.

  • Unable to start the Universal Connection Pool error

    Hi,
    I am trying to deploy two instances of one and the same web application on Tomcat 6. I have application test.war, I have copied and renamed it to test2.war and moved both wars in Tomcat' webapps folder. One of those (which Tomcat decides to start first) correctly gets connection from PoolDataSourceFactory.getPoolDataSource() and works fine, but the second throws this exception while trying to get database connection.
    Please help,
    Thanks
    java.sql.SQLException: Unable to start the Universal Connection Pool: java.sql.SQLException: Unable to start the Universal Connection Pool: oracle.ucp.UniversalConnectionPoolException: MBean exception occurred while registering or unregistering the MBean
    at oracle.ucp.util.UCPErrorHandler.newSQLException(UCPErrorHandler.java:541)
    at oracle.ucp.jdbc.PoolDataSourceImpl.throwSQLException(PoolDataSourceImpl.java:587)
    at oracle.ucp.jdbc.PoolDataSourceImpl.startPool(PoolDataSourceImpl.java:276)
    at oracle.ucp.jdbc.PoolDataSourceImpl.getConnection(PoolDataSourceImpl.java:646)
    at oracle.ucp.jdbc.PoolDataSourceImpl.getConnection(PoolDataSourceImpl.java:613)
    at oracle.ucp.jdbc.PoolDataSourceImpl.getConnection(PoolDataSourceImpl.java:607)
    at com.avalonsql.core.db.connection.ConnectionWrapper.<init>(ConnectionWrapper.java:26)
    ... 31 more
    Caused by: java.sql.SQLException: Unable to start the Universal Connection Pool: oracle.ucp.UniversalConnectionPoolException: MBean exception occurred while registering or unregistering the MBean
    at oracle.ucp.util.UCPErrorHandler.newSQLException(UCPErrorHandler.java:541)
    at oracle.ucp.jdbc.PoolDataSourceImpl.throwSQLException(PoolDataSourceImpl.java:587)
    at oracle.ucp.jdbc.PoolDataSourceImpl.startPool(PoolDataSourceImpl.java:247)
    ... 35 more
    Caused by: oracle.ucp.UniversalConnectionPoolException: MBean exception occurred while registering or unregistering the MBean
    at oracle.ucp.util.UCPErrorHandler.newUniversalConnectionPoolException(UCPErrorHandler.java:421)
    at oracle.ucp.util.UCPErrorHandler.newUniversalConnectionPoolException(UCPErrorHandler.java:389)
    at oracle.ucp.admin.UniversalConnectionPoolManagerMBeanImpl.getUniversalConnectionPoolManagerMBean(UniversalConnectionPoolManagerMBeanImpl.java:149)
    at oracle.ucp.jdbc.PoolDataSourceImpl.startPool(PoolDataSourceImpl.java:242)
    ... 35 more
    Caused by: java.security.PrivilegedActionException: javax.management.InstanceAlreadyExistsException: oracle.ucp.admin:name=UniversalConnectionPoolManagerMBean
    at java.security.AccessController.doPrivileged(Native Method)
    at oracle.ucp.admin.UniversalConnectionPoolManagerMBeanImpl.getUniversalConnectionPoolManagerMBean(UniversalConnectionPoolManagerMBeanImpl.java:136)
    ... 36 more
    Caused by: javax.management.InstanceAlreadyExistsException: oracle.ucp.admin:name=UniversalConnectionPoolManagerMBean
    at com.sun.jmx.mbeanserver.Repository.addMBean(Repository.java:453)
    at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.internal_addObject(DefaultMBeanServerInterceptor.java:1484)
    at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.registerDynamicMBean(DefaultMBeanServerInterceptor.java:963)
    at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.registerObject(DefaultMBeanServerInterceptor.java:917)
    at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.registerMBean(DefaultMBeanServerInterceptor.java:312)
    at com.sun.jmx.mbeanserver.JmxMBeanServer.registerMBean(JmxMBeanServer.java:482)
    at oracle.ucp.admin.UniversalConnectionPoolManagerMBeanImpl$2.run(UniversalConnectionPoolManagerMBeanImpl.java:142)
    ... 38 more

    I was getting the following exception.. However after setting the property ConnectionFactoryClassName, it went off..
    Caused by: java.sql.SQLException: Invalid Universal Connection Pool configuration: java.sql.SQLException: Unable to create factory class instance with provided factory class name: java.lang.ClassNotFoundException:
         at oracle.ucp.util.UCPErrorHandler.newSQLException(UCPErrorHandler.java:541)
         at oracle.ucp.jdbc.PoolDataSourceImpl.throwSQLException(PoolDataSourceImpl.java:587)
         at oracle.ucp.jdbc.PoolDataSourceImpl.createUniversalConnectionPool(PoolDataSourceImpl.java:523)
         at oracle.ucp.admin.UniversalConnectionPoolManagerBase.createConnectionPool(UniversalConnectionPoolManagerBase.java:554)
         ... 92 more
    Caused by: java.sql.SQLException: Unable to create factory class instance with provided factory class name: java.lang.ClassNotFoundException:
         at oracle.ucp.util.UCPErrorHandler.newSQLException(UCPErrorHandler.java:541)
         at oracle.ucp.jdbc.PoolDataSourceImpl.throwSQLException(PoolDataSourceImpl.java:587)
         at oracle.ucp.jdbc.PoolDataSourceImpl.initConnectionFactory(PoolDataSourceImpl.java:2457)
         at oracle.ucp.jdbc.PoolDataSourceImpl.createUniversalConnectionPool(PoolDataSourceImpl.java:386)
         ... 93 more
    Caused by: java.lang.ClassNotFoundException:
         at java.lang.Class.forNameImpl(Native Method)
         at java.lang.Class.forName(Class.java:169)
         at oracle.ucp.jdbc.PoolDataSourceImpl.initConnectionFactory(PoolDataSourceImpl.java:2444)
         ... 94 more
    Edited by: user7953709 on Aug 26, 2011 1:08 AM

  • WSUS Sync is not working Sync failed: UssCommunicationError: WebException: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel. --- System.Security.Authentication.AuthenticationException: The remote

    I know there are loads of posts with same issue and most of them were related to proxy and connectivity .
    This was case for me as well (few months back). Now the same error is back. But I've confirmed that FW ports and proxy are fine this time around.
    server is configured on http port 80 
    ERROR
    Sync failed: UssCommunicationError: WebException: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel. ---> System.Security.Authentication.AuthenticationException: The remote certificate is invalid
    according to the validation procedure.~~at System.Web.Services.Protocols.WebClientProtocol.GetWebResponse(WebRequest request). Source: Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.WSyncAction.WSyncAction.SyncWSUS
    I've checked proxy server connectivity. I'm able browse following site from WSUS server
    http://catalog.update.microsoft.com/v7/site/Home.aspx?sku=wsus&version=3.2.7600.226&protocol=1.8
    I did telnet proxy server on the particular port (8080) and that is also fine.
    I've doubt on certificates, any idea which are the certificates which we need to look? And if certificate is expired then (my guess) we won't be able open the above mentioned windows update catalog site?
    Any tips appreciated !
    Anoop C Nair (My Blog www.AnoopCNair.com)
    - Twitter @anoopmannur -
    FaceBook Forum For SCCM

    Hi Lawrence ! - Many thanks for looking into this thread and replying. Appreciate your help.
    Your reply  ("SSL is enabled/configured, and the certificate being used is invalid
    (or the cert does not exist or cannot be obtained), or the SSL connection could not be established.") is very helpful.
    I've already tested CONTENT DOWNLOAD and it's working fine. WSUS Sync was also working fine for years with proxy server configured on port (8080) and WSUS server on port 80.
    My Guess (this is my best guess ;)) is this something to do with Firewall or Proxy side configuration rather than WSUS. However, I'm not finding a way to prove this to proxy/firewall team. From their perspective all the required port communication open and
    proxy server is also reachable. More over we're able to access internet (Microsoft Update Catalog site) over same port (8080).
    Any other hints where I can prove them it's a sure shot problem from their side.
    Thanks again !!
    Anoop C Nair (My Blog www.AnoopCNair.com)
    - Twitter @anoopmannur -
    FaceBook Forum For SCCM

  • Unable to import Thesaurus in SharePoint 2013 - Failed to start the flow

    I am having issue with importing Thesaurus into SharePoint 2013. I have tried with seed file on local and remote server without success. On ULS stack, it lists  "Cannot start flow. The admin service is unavailable". But if
    I retrieve status of search topology, it lists admin components (running on two app server) are active. Any idea how this could be resolved or direction I can head to?
    This is what I have tried :
    PS C:\Users\user> $sa = Get-SPEnterpriseSearchServiceApplication
    PS C:\Users\user> Import-SPEnterpriseSearchThesaurus -SearchApplication $sa -FileName \\server_name\testThesaurus.csv 
        + CategoryInfo          : ResourceUnavailable: (Microsoft.Offic...aurusDictionary:ImportThesaurusDictionary) [Import-SPEnterpriseSearchThesaurus],  
       InvalidOperationException
        + FullyQualifiedErrorId : Microsoft.Office.Server.Search.Cmdlet.ImportThesaurusDictionary
    On ULS I get the following entries:
    CtsConnection.StartFlow: Failed to start the flow: Microsoft.ThesaurusDeployment. Exception: System.ServiceModel.FaultException: Cannot start flow. The admin service is unavailable.    Server stack trace:     
     at System.ServiceModel.Channels.ServiceChannel.HandleReply(ProxyOperationRuntime operation, ProxyRpc& rpc)    
     at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)    
     at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)    
     at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)    Exception rethrown
     at [0]:     
     at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)    
     at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)    
     at Microsoft.Ceres.ContentEngine.Services.ContentIntegrationEngine.IContentIntegrationEngineManagementAgent.ExecuteFlow(String name, FlowEvaluationConfig config)    
     at Microsoft.Ceres.ContentEngine.ComponentClient.CtsConnection.StartFlow(String flowName, IDictionary`2 parameters)
    MK Sin

    Hi,
    Please check if it is related to the primary search host controller, make sure it is enabled for the farm, then check results again.
    $searchApp = Get-SPEnterpriseSearchServiceApplication
    Get-SPEnterpriseSearchLinguisticComponentsStatus -SearchApplication $searchApp
    Get-SPEnterpriseSearchHostcontroller
    Import-SPEnterpriseSearchThesaurus -SearchApplication $searchApp -Filename \\sp\custom_thesaurus.csv
    Thanks
    Daniel Yang
    TechNet Community Support

  • Hyper-V - 'Failed to start the virtual machine 'test' because one of the Hyper-V components is not running.'

    Hi all,
    Having a bit of a nightmare with Hyper-V on my Windows 8 Pro laptop - Whenever I create a new VM and try to start it I receive the following error;
    'Failed to start the virtual machine 'test' because one of the Hyper-V components is not running.'
    I sometimes also receive an error saying something along the lines of 'Unable to change virtual machine state'
    I have done a lot of searching a seen two common answers - The first is to try removing the Hyper-V role and re-adding it - I have tried this several times to no avail. (Intel VT and all virtualisation capabilities are enabled in BIOS). The second issue
    it would seem
    some people have had relates to editing the VMX configuration file and adding the line
    hypervisor.cpuid.v0 = "FALSE" - I thought VMX files were only present in VMware Virtual Machines...
    Any help would be greatly appreciated.
    Many thanks in advance.
    James

    The hypervisor event log message is generated only at boot - so this would be expected.  Also vmbus should not be running on the host (I was looking at a VM yesterday)...  This error message is generated only when the vid is determined not to be
    running or cannot communicate with the hypervisor.
    I have seen this due to anti-virus software in the past or due to driver verifier being configured.  Since it looks like you checked driver verifier already do you have anti-virus software installed?  If so have you followed the best practices
    and exempted the Hyper-v services? 
    http://technet.microsoft.com/en-us/library/dd283088(WS.10).aspx
    To resolve this problem, configure the real-time scanning component within your antivirus software to exclude the following directories and files:
    Default virtual machine configuration directory (C:\ProgramData\Microsoft\Windows\Hyper-V)
    Custom virtual machine configuration directories
    Default virtual hard disk drive directory (C:\Users\Public\Documents\Hyper-V\Virtual Hard Disks)
    Custom virtual hard disk drive directories
    Custom replication data directories, if you are using Hyper-V Replica
    Snapshot directories
    Vmms.exe (Note: This file may have to be configured as a process exclusion within the antivirus software.)
    Vmwp.exe (Note: This file may have to be configured as a process exclusion within the antivirus software.)
    -Taylor Brown<br/> -Program Manager, Hyper-V<br/> -http://blogs.msdn.com/taylorb

  • I fail to start the sap server with error:Operating system call recv failed

    I fail to start the sap server in SAP R3 Management Console and the message in the syslog was :
    R/3 Basis System: Operating system call           recv failed (error no. 10053)
    Is there any one could tell me how to resolve the problem or give me some advice?I will appreciate him/her very much.Thank you.

    trc file: "dev_disp", trc level: 1, release: "620"
    Sun May 07 13:14:30 2000
    kernel runs with dp version 3(ext=1) (@(#) DPLIB-INT-VERSION-3)
    length of sys_adm_ext is 304 bytes
    systemid   560 (PC with Windows NT)
    relno      6200
    patchlevel 0
    patchno    674
    intno      20020600
    pid        3628
    ***LOG Q00=> DpSapEnvInit, DPStart (00 3628) [dpxxdisp.c   978]
         shared lib "dw_xml.dll" version 674 successfully loaded
         shared lib "dw_xtc.dll" version 674 successfully loaded
         shared lib "dw_stl.dll" version 674 successfully loaded
    Sun May 07 13:14:32 2000
    WARNING => DpNetCheck: NiAddrToHostCanon() took 2 seconds
    Sun May 07 13:14:37 2000
    WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
    ***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c  3212]
    MtxInit: -2 0 0
    DpShMCreate: sizeof(wp_adm)          12784     (752)
    DpShMCreate: sizeof(tm_adm)          1690816     (8412)
    DpShMCreate: sizeof(wp_ca_adm)     18000     (60)
    DpShMCreate: sizeof(appc_ca_adm)     6000     (60)
    DpShMCreate: sizeof(comm_adm)     192000     (384)
    DpShMCreate: sizeof(wall_adm)     (22440/34344/56/100)
    DpShMCreate: SHM_DP_ADM_KEY          (addr: 001E0040, size: 1977824)
    DpShMCreate: allocated sys_adm at 001E0040
    DpShMCreate: allocated wp_adm at 001E0560
    DpShMCreate: allocated tm_adm_list at 001E3750
    DpShMCreate: allocated tm_adm at 001E3778
    DpShMCreate: allocated wp_ca_adm at 00380438
    DpShMCreate: allocated appc_ca_adm at 00384A88
    DpShMCreate: allocated comm_adm_list at 003861F8
    DpShMCreate: allocated comm_adm at 00386210
    DpShMCreate: allocated ca_info at 003B5010
    DpShMCreate: allocated wall_adm at 003B5018
    MBUF state OFF
    Sun May 07 13:14:38 2000
    EmInit: MmSetImplementation( 2 ).
    <ES> client 0 initializing ....
    <ES> InitFreeList
    <ES> block size is 1024 kByte.
    Using implementation std
    <EsNT> Memory Reset enabled as NT default
    <EsNT> EsIUnamFileMapInit: Initialize the memory 2458 MB
    <ES> 2457 blocks reserved for free list.
    ES initialized.
    ***LOG Q0K=> DpMsAttach, mscon ( db01) [dpxxdisp.c   9115]
    CCMS: Initalizing shared memory of size 20000000 for monitoring segment.
    CCMS: start to initalize 3.X shared alert area (first segment).
    DpMsgAdmin: Set release to 6200, patchlevel 0
    MBUF state PREPARED
    MBUF component UP
    DpMBufHwIdSet: set Hardware-ID
    ***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   941]
    DpMsgAdmin: Set patchno for this platform to 674
    Release check o.K.
    Sun May 07 13:15:18 2000
    ERROR => W2 (pid 4776) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W2
    Sun May 07 13:15:38 2000
    ERROR => W5 (pid 4548) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W5
    ERROR => W8 (pid 4592) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W8
    ERROR => W9 (pid 4584) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W9
    ERROR => W12 (pid 4676) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W12
    ERROR => W13 (pid 4272) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W13
    my types changed after wp death/restart 0xbf --> 0xb7
    Sun May 07 13:15:58 2000
    ERROR => W4 (pid 4888) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W4
    ERROR => W6 (pid 4788) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W6
    ERROR => W15 (pid 4596) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W15
    Sun May 07 13:16:18 2000
    ERROR => W1 (pid 4892) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W1
    ERROR => W3 (pid 4904) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W3
    ERROR => W7 (pid 4000) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W7
    ERROR => W10 (pid 4864) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W10
    my types changed after wp death/restart 0xb7 --> 0xb5
    Sun May 07 13:16:38 2000
    ERROR => W0 (pid 4900) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W0
    ERROR => W11 (pid 4500) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W11
    ERROR => W14 (pid 4636) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W14
    ERROR => W16 (pid 3532) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W16
    my types changed after wp death/restart 0xb5 --> 0x80
    DP_FATAL_ERROR => DpEnvCheck: no more work processes
    DISPATCHER EMERGENCY SHUTDOWN ***
    DpModState: change server state from STARTING to SHUTDOWN
    Sun May 07 13:16:42 2000
    ***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c   9341]
    MBUF state OFF
    MBUF component DOWN
    ***LOG Q05=> DpHalt, DPStop ( 3628) [dpxxdisp.c   7883]

  • While installing grid software in rac in vmware we got the below error, failed to start the Clusterware

    hi,
    this is malli,
    i got below error while installing grid software in rac.
    os versin redhat 11inux 5.5
    oracle 11gr2 cluster rac
    thanks in advance....please do needful
    Failed to start the Clusterware. Last 20 lines of the alert log follow:
    2014-12-24 01:05:40.100
    [client(3850)]CRS-2101:The OLR was formatted using version 3.
    2014-12-24 01:05:41.923
    [client(3852)]CRS-2317:Fatal error: cannot get local GPnP security keys (wallet).
    2014-12-24 01:05:41.923
    [client(3852)]CRS-2316:Fatal error: cannot initialize GPnP, CLSGPNP_ERR (Generic GPnP error).
    2014-12-24 01:05:41.954
    [client(3852)]CRS-1013:The OCR location in an ASM disk group is inaccessible. Details in /u01/app/11.2.0/grid_home/log/lnx01/client/clscfg.log.

    [client(3852)]CRS-1013:The OCR location in an ASM disk group is inaccessible. Details in /u01/app/11.2.0/grid_home/log/lnx01/client/clscfg.log.
    Have you looked in this log file to see why the OCR is inaccessible? Have you looked in the ASM instance's alert log for other clues?
    Cheers,
    Brian

  • REP-6102: Failed to start the XML parser.

    I have this project that was started using the Reports Wizard, however using a very simplified query. Then I've applied quite a lot of PL/SQL code to pre-process the report data. Eventually everything works fine, and the only thing remaining is to properly format the output. Then I save the project as a JSP, or RDF, or XML, and quits Reports all together.
    The next time I open the project everything seems fine Thus I employ the Wizard to format the reports' output, and saves the project again. And quits the application.
    The next time I open the project I receive one of two messages; 'REP-6102: Failed to start the XML parser', or 'REP-0002: Unable to retrieve a string from the Report Builder message file'. Then Reports crashes!!!!
    This means I cannot complete the report as I'm unable to save and retrieve a completed report. I've tried this with several reports, all with the same result. I've even unstalled all Oracle-sw on my PC and re-installed it several times.
    I'm running WinXP, Oracle 9I DS with patch 9.0.2.1 applied.

    Hello Lasse,
    I think you are hitting a known issue, could you please call Support to get the status of this problem.
    Regards
    Tugdual

  • Error creating ASComponent oid1,Cause:Failed to start the componentAction

    Hi,
    On 64-bit Windows-7 machine, I have installed Oracle DB (11.1.1.5.0), RCU (11.1.1.5.0),
    Weblogic Server (10.3.5.0) and then I was trying to install Oracle IDM (11.1.1.5.0).
    During IDM installation, I selected the option "Install and Configure".
    Installation set up is successful.
    But it failed while configuring Oracle Identity Management Components - step2 - Start Oracle Internet Directory - Failed.
    Error :
    Error creating ASComponent oid1.
    Cause:
    An internal operation has failed: Failed to start the componentAction
    Logs:
    [OOB IDM CONFIG EVENT] onConfigurationError -> set RETRY ExecutionResponse..
    E:\Oracle\Middleware\Oracle_IDM2 E:\Oracle\Middleware\asinst_1 asinst_1
    oracle.as.config.ProvisionException: Failed to start the component
         at oracle.as.provisioning.fmwadmin.ASComponentProv.createComponent(ASComponentProv.java:157)
         at oracle.as.provisioning.fmwadmin.ASComponentProv.createComponent(ASComponentProv.java:73)
         at oracle.as.provisioning.fmwadmin.ASInstanceProv._createComponent(ASInstanceProv.java:401)
         at oracle.as.provisioning.fmwadmin.ASInstanceProv.createComponent(ASInstanceProv.java:364)
         at oracle.as.provisioning.fmwadmin.ASInstanceProv.createInstanceAndComponents(ASInstanceProv.java:136)
         at oracle.as.provisioning.engine.WorkFlowExecutor._createASInstancesAndComponents(WorkFlowExecutor.java:523)
         at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:439)
         at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
         at oracle.as.idm.install.config.IdMDirectoryServicesManager.doExecute(IdMDirectoryServicesManager.java:951)
         at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
         at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
         at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
         at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
         at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
         at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
         at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
         at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
         at java.lang.Thread.run(Thread.java:662)
    oracle.as.provisioning.util.ConfigException:
    创建 ASComponent oid1 时出错。
    Cause: 内部操作失败: Failed to start the componentAction: 有关详细信息, 请查看日志。
         at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
         at oracle.as.provisioning.fmwadmin.ASInstanceProv._createComponent(ASInstanceProv.java:414)
         at oracle.as.provisioning.fmwadmin.ASInstanceProv.createComponent(ASInstanceProv.java:364)
         at oracle.as.provisioning.fmwadmin.ASInstanceProv.createInstanceAndComponents(ASInstanceProv.java:136)
         at oracle.as.provisioning.engine.WorkFlowExecutor._createASInstancesAndComponents(WorkFlowExecutor.java:523)
         at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:439)
         at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
         at oracle.as.idm.install.config.IdMDirectoryServicesManager.doExecute(IdMDirectoryServicesManager.java:951)
         at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
         at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
         at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
         at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
         at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
         at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
         at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
         at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
         at java.lang.Thread.run(Thread.java:662)
    Caused by: oracle.as.config.ProvisionException: Failed to start the component
         at oracle.as.provisioning.fmwadmin.ASComponentProv.createComponent(ASComponentProv.java:157)
         at oracle.as.provisioning.fmwadmin.ASComponentProv.createComponent(ASComponentProv.java:73)
         at oracle.as.provisioning.fmwadmin.ASInstanceProv._createComponent(ASInstanceProv.java:401)
         ... 15 more
    progress in calculate progress50

    Hi,
    Please try
    "Error Creating ASComponent Oid1" Error During OID Configuration When Installing OID11g (Doc ID 1427253.1) that should resolve the issue.

  • Thesaurus update failed - Failed to start the flow

    Hi,
    I have been updating the thesaurus file many times in the past months via PowerShell. I updated the file a few times in the same day. Then all of a sudden I get:
    Import-SPEnterpriseSearchThesaurus : Failed to start the flow: Microsoct.ThesaurusDeployment.
    At location of my file...
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        + CategoryInfo          : InvalidData: (Microsoft.Offic...aurusDictionary:ImportThesaurusDictionary) [Import-SPEnt
       erpriseSearchThesaurus], CommunicationException
        + FullyQualifiedErrorId : Microsoft.Office.Server.Search.Cmdlet.ImportThesaurusDictionary
    Has anyone encountered this problem?
    Thanks,
    Mike

    I've got the same issue right now.  the commands i am running are:
    $searchApp = Get-SPEnterpriseSearchServiceApplication
     Import-SPEnterpriseSearchThesaurus -SearchApplication $searchApp -Filename
    \\klpssp01\spthesaurus\spthesaurus.csv
    the path to the csv is right.  I'm just trying to test this out, so my csv looks like this:
    Key,Synonym,Language
    apples,red delicious
    apples,granny smith
    apples,honeycrisp
    broccoli,yucky
    Broccoli,gross
    Here is the error I get:
    Import-SPEnterpriseSearchThesaurus : Failed to start the flow:
    Microsoft.ThesaurusDeployment.
    At line:1 char:1
    + Import-SPEnterpriseSearchThesaurus -SearchApplication $searchApp -Filename
    \\klp ...
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    ~~~
        + CategoryInfo          : InvalidData: (Microsoft.Offic...aurusDictionary:
       ImportThesaurusDictionary) [Import-SPEnterpriseSearchThesaurus], Communica
      tionException
        + FullyQualifiedErrorId : Microsoft.Office.Server.Search.Cmdlet.ImportThes
       aurusDictionary

  • ISQL*Plus Failed ta start the service, Error:0

    Hello there,
    I setup Oracle 10g for window 2003. When to Configuration Assistans then show table error : Failed ta start the service, Error:0, The operation completed successfully.
    In the Event Viewer i can see the following:
    The description for Event ID ( 15 ) in Source ( iSQL*Plus Application Server ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: 1460, This operation returned because the timeout period expired.
    , 4.
    I set the Path variable C:\oracle\SOL\102\bin and the ORACLE_HOME to:
    C:\oracle\SOL\102
    But it did not solve the problem.
    I installed only Windows 2003 Enterprise Server with Service Pack 2
    when i use this command isqlplusctl start at command prompt the message appears:
    Failed ta start the service, Error:0, The operation completed successfully.
    please can you help here?

    I forgot.
    I installed JAVA SDK 1.4.2_09 too
    But when i uninstall it the same error appears...
    But i think Oracle do run with 1.4.2_09 or not?

Maybe you are looking for

  • Is this an iPhone or AT&T issue?

    I'm getting mixed impressions from both Apple and AT&T on this, so thought I'd ask on here and see what the consensus is with a few issues I have. 1. Volume is too low, even at max volume. Probably an iPhone issue, I think. If so, is this something t

  • Low mic

    someone once wrote: "I just got my iPhone 3GS a week ago and i got some issues with it. First i have to say that it's a lot faster than my iPhone 3G. After few days the phone suddenly got hot and sucked out my battery. After charging it to 100% durin

  • Create banner for blog

    how can I create a banner for my blog. specifically how can I copy the text box and save it as an image?

  • Installation Error: hostname is morethan 13 character long .....

    Hi I have downloaded sap Netweaver 7.01 ABAP Trial version.But I tried to Install it and  getting error message which says that host name exceeds 13 character and to resolve that SAP Note(611361) has also been mentioned. I have gone through that and

  • "Billing block" status has been set.

    One contract was incepted (Created) on 13.03.2008. BRI's also generated, BRI is nothing but which calculates the EMI amount with respective billing dates. But due to some reason all BRI got u201Cblock for billingu201D status. Because of that BILLING