Failing after bootcamp

So hey guys im new here and i have a problem that you might be aware of ...
I tryd to bootcamp via BC assisstant and i divided then equally coz i wanted to install Windows 7 Ultimate 64-bit.
So i divided 250gb of HDD and i failed to burn my disc as a ISO. file so the mac can recognize it so i came across an error that said
"Press any key to boot" or smtg like that and pressed control and got back on MAC OS X. So i changed my mind about the windows 7 and i wanted to get my partition of HDD back ... so i went into DISK UTILITY pressed right click on the HDD and removed the portion from there ... the problem is i still dont have the GB's returned ... and i have 2 schemes MACINTOSH HD and an empty one... and i have available space of 136 GB ... i would like to get my FULL SIZE back of 500 GB's .
The real problem is after this i tryed finding my CD of snow leopard so i could reinstall or check something from there and i couldnt find it... and plus i dont have any TIME MACHINE backup . So help me if you can coz im kinda new on mac
Ty in advance boys & girls hope we fix this together.

First run the Bootcamp Assistant and try deleting the Boocamp Partition that way, mind you it may take some time before it's finished. That's the safest way.
The other way is to open Disk Utility and click on the internal drive on the far left that underneath has your MacIntosh HD and the BOOTCAMP partitions.
It will look almost like this (I have two OS X partitions instead)
Next you want to click on the Bootcamp partition and click the little "-" button
Next you want to take the corner draggy thing of the first partition and drag it over the empty space /apply and wait.
I haven't done it in awhile so I forget the exact details, but that's how it's done.
Need I remind you to backup your data! Drives fail suddenly and all your personal data will be gone!
https://discussions.apple.com/message/16276201#16276201

Similar Messages

Yosemite booting fails after erasing and merging bootcamp

I have a MBP 15' retina. I had dual system: mac and windows, but windows failed after upgrading to to Yosemite for obvious reasons so I left it there. Yesterday, I decided to erase my bootcamp and merge it to my mac partition. Everything worked out smoothly as long as I did not reboot. After reboot, Yosemite failed. Here are the symptoms:
Please assist. Thanks

Click on Utilities -> Terminal and post the output of the following Terminal commands. In Recovery console you have to switch between Terminal and Safari.
diskutil list
diskutil cs list
gpt -vv -r show /dev/disk0
fdisk /dev/disk0

Can no longer boot to MacOSX after bootcamp install

Hello all, I have an issue to where I can no longer boot into the Mac OSX partition after what appears to be a failed Windows bootcamp install. As I was running the bootcamp assistant process, a reboot occurred and I was greeted with the "No bootable device -- insert boot disk and press any key". I have no idea how to get past this and boot back to OSX.
Things I have tried:
Holding down the "option" key does nothing, even using a USB keyboard
Resetting PRAM (CMD + OPT + P + R) does nothing, even with USB keyboard
I have put in a MAC OSX 10.7 Disk and cannot boot to disk using CMD + C on startup
I also pulled the hard drive out and connected it to another PC and wiped the drive completely. I put it back in the macbook and I am still presented with this error. It seems, even though I get the Mac startup tone, that it is stuck in which ever OS it tried to run previously, that being Windows. Not sure why I am still receiving this error even after wiping the drive completely clean.
As far as hardware goes, I am pretty sure its a late 2010 Alumn. Macbook Pro. I cant get the current model number since I cant boot the OS. Any help is appreciated.

Please reset SMC as well.
You can get the serial number from the back cover and use https://selfsolve.apple.com/agreementWarrantyDynamic.do to find the model.

Unit test fails after upgrading to Kodo 4.0.0 from 4.0.0-EA4

I have a group of 6 unit tests failing after upgrading to the new Kodo
4.0.0 (with BEA) from Kodo-4.0.0-EA4 (with Solarmetric). I'm getting
exceptions like the one at the bottom of this email. It seems to be an
interaction with the PostgreSQL driver, though I can't be sure. I
haven't changed my JDO configuration or the related classes in months
since I've been focusing on using the objects that have already been
defined. The .jdo, .jdoquery, and .java code are below the exception,
just in case there's something wrong in there. Does anyone have advice
as to how I might debug this?
Thanks,
Mark
Testsuite: edu.ucsc.whisper.test.integration.UserManagerQueryIntegrationTest
Tests run: 15, Failures: 0, Errors: 6, Time elapsed: 23.308 sec
Testcase:
testGetAllUsersWithFirstName(edu.ucsc.whisper.test.integration.UserManagerQueryIntegrationTest):
Caused an ERROR
The column index is out of range: 2, number of columns: 1.
<2|false|4.0.0> kodo.jdo.DataStoreException: The column index is out of
range: 2, number of columns: 1.
at
kodo.jdbc.sql.DBDictionary.newStoreException(DBDictionary.java:4092)
at kodo.jdbc.sql.SQLExceptions.getStore(SQLExceptions.java:82)
at kodo.jdbc.sql.SQLExceptions.getStore(SQLExceptions.java:66)
at kodo.jdbc.sql.SQLExceptions.getStore(SQLExceptions.java:46)
at
kodo.jdbc.kernel.SelectResultObjectProvider.handleCheckedException(SelectResultObjectProvider.java:176)
at
kodo.kernel.QueryImpl$PackingResultObjectProvider.handleCheckedException(QueryImpl.java:2460)
at
com.solarmetric.rop.EagerResultList.<init>(EagerResultList.java:32)
at kodo.kernel.QueryImpl.toResult(QueryImpl.java:1445)
at kodo.kernel.QueryImpl.execute(QueryImpl.java:1136)
at kodo.kernel.QueryImpl.execute(QueryImpl.java:901)
at kodo.kernel.QueryImpl.execute(QueryImpl.java:865)
at kodo.kernel.DelegatingQuery.execute(DelegatingQuery.java:787)
at kodo.jdo.QueryImpl.executeWithArray(QueryImpl.java:210)
at kodo.jdo.QueryImpl.execute(QueryImpl.java:137)
at
edu.ucsc.whisper.core.dao.JdoUserDao.findAllUsersWithFirstName(JdoUserDao.java:232)
at
edu.ucsc.whisper.core.manager.DefaultUserManager.getAllUsersWithFirstName(DefaultUserManager.java:252)
NestedThrowablesStackTrace:
org.postgresql.util.PSQLException: The column index is out of range: 2,
number of columns: 1.
at
org.postgresql.core.v3.SimpleParameterList.bind(SimpleParameterList.java:57)
at
org.postgresql.core.v3.SimpleParameterList.setLiteralParameter(SimpleParameterList.java:101)
at
org.postgresql.jdbc2.AbstractJdbc2Statement.bindLiteral(AbstractJdbc2Statement.java:2085)
at
org.postgresql.jdbc2.AbstractJdbc2Statement.setInt(AbstractJdbc2Statement.java:1133)
at
com.solarmetric.jdbc.DelegatingPreparedStatement.setInt(DelegatingPreparedStatement.java:390)
at
com.solarmetric.jdbc.PoolConnection$PoolPreparedStatement.setInt(PoolConnection.java:440)
at
com.solarmetric.jdbc.DelegatingPreparedStatement.setInt(DelegatingPreparedStatement.java:390)
at
com.solarmetric.jdbc.DelegatingPreparedStatement.setInt(DelegatingPreparedStatement.java:390)
at
com.solarmetric.jdbc.DelegatingPreparedStatement.setInt(DelegatingPreparedStatement.java:390)
at
com.solarmetric.jdbc.LoggingConnectionDecorator$LoggingConnection$LoggingPreparedStatement.setInt(LoggingConnectionDecorator.java:1
257)
at
com.solarmetric.jdbc.DelegatingPreparedStatement.setInt(DelegatingPreparedStatement.java:390)
at
com.solarmetric.jdbc.DelegatingPreparedStatement.setInt(DelegatingPreparedStatement.java:390)
at kodo.jdbc.sql.DBDictionary.setInt(DBDictionary.java:980)
at kodo.jdbc.sql.DBDictionary.setUnknown(DBDictionary.java:1299)
at kodo.jdbc.sql.SQLBuffer.setParameters(SQLBuffer.java:638)
at kodo.jdbc.sql.SQLBuffer.prepareStatement(SQLBuffer.java:539)
at kodo.jdbc.sql.SQLBuffer.prepareStatement(SQLBuffer.java:512)
at kodo.jdbc.sql.SelectImpl.execute(SelectImpl.java:332)
at kodo.jdbc.sql.SelectImpl.execute(SelectImpl.java:301)
at kodo.jdbc.sql.Union$UnionSelect.execute(Union.java:642)
at kodo.jdbc.sql.Union.execute(Union.java:326)
at kodo.jdbc.sql.Union.execute(Union.java:313)
at
kodo.jdbc.kernel.SelectResultObjectProvider.open(SelectResultObjectProvider.java:98)
at
kodo.kernel.QueryImpl$PackingResultObjectProvider.open(QueryImpl.java:2405)
at
com.solarmetric.rop.EagerResultList.<init>(EagerResultList.java:22)
at kodo.kernel.QueryImpl.toResult(QueryImpl.java:1445)
at kodo.kernel.QueryImpl.execute(QueryImpl.java:1136)
at kodo.kernel.QueryImpl.execute(QueryImpl.java:901)
at kodo.kernel.QueryImpl.execute(QueryImpl.java:865)
at kodo.kernel.DelegatingQuery.execute(DelegatingQuery.java:787)
at kodo.jdo.QueryImpl.executeWithArray(QueryImpl.java:210)
at kodo.jdo.QueryImpl.execute(QueryImpl.java:137)
at
edu.ucsc.whisper.core.dao.JdoUserDao.findAllUsersWithFirstName(JdoUserDao.java:232)
--- DefaultUser.java -------------------------------------------------
public class DefaultUser
implements User
/** The account username. */
private String username;
/** The account password. */
private String password;
/** A flag indicating whether or not the account is enabled. */
private boolean enabled;
/** The authorities granted to this account. */
private Set<Authority> authorities;
/** Information about the user, including their name and text that
describes them. */
private UserInfo userInfo;
/** The set of organizations where this user works. */
private Set<Organization> organizations;
--- DefaultUser.jdo --------------------------------------------------
<?xml version="1.0"?>
<!DOCTYPE jdo PUBLIC
"-//Sun Microsystems, Inc.//DTD Java Data Objects Metadata 2.0//EN"
"http://java.sun.com/dtd/jdo_2_0.dtd">
<jdo>
<package name="edu.ucsc.whisper.core">
<sequence name="user_id_seq"
factory-class="native(Sequence=user_id_seq)"/>
<class name="DefaultUser" detachable="true"
table="whisper_user" identity-type="datastore">
<datastore-identity sequence="user_id_seq" column="userId"/>
<field name="username">
<column name="username" length="80" jdbc-type="VARCHAR" />
</field>
<field name="password">
<column name="password" length="40" jdbc-type="CHAR" />
</field>
<field name="enabled">
<column name="enabled" />
</field>
<field name="userInfo" persistence-modifier="persistent"
default-fetch-group="true" dependent="true">
<extension vendor-name="jpox"
key="implementation-classes"
value="edu.ucsc.whisper.core.DefaultUserInfo" />
<extension vendor-name="kodo"
key="type"
value="edu.ucsc.whisper.core.DefaultUserInfo" />
</field>
<field name="authorities" persistence-modifier="persistent"
table="user_authorities"
default-fetch-group="true">
<collection
element-type="edu.ucsc.whisper.core.DefaultAuthority" />
<join column="userId" delete-action="cascade"/>
<element column="authorityId" delete-action="cascade"/>
</field>
<field name="organizations" persistence-modifier="persistent"
table="user_organizations" mapped-by="user"
default-fetch-group="true" dependent="true">
<collection
element-type="edu.ucsc.whisper.core.DefaultOrganization"
dependent-element="true"/>
<join column="userId"/>

</field>
</class>
</package>
</jdo>
--- DefaultUser.jdoquery ---------------------------------------------
<?xml version="1.0"?>
<!DOCTYPE jdo PUBLIC
"-//Sun Microsystems, Inc.//DTD Java Data Objects Metadata 2.0//EN"
"http://java.sun.com/dtd/jdo_2_0.dtd">
<jdo>
<package name="edu.ucsc.whisper.core">
<class name="DefaultUser">
<query name="UserByUsername"
language="javax.jdo.query.JDOQL"><![CDATA[
SELECT UNIQUE FROM edu.ucsc.whisper.core.DefaultUser
WHERE username==searchName
PARAMETERS java.lang.String searchName
]]></query>
<query name="DisabledUsers"
language="javax.jdo.query.JDOQL"><![CDATA[
SELECT FROM edu.ucsc.whisper.core.DefaultUser WHERE
enabled==false
]]></query>
<query name="EnabledUsers"
language="javax.jdo.query.JDOQL"><![CDATA[
SELECT FROM edu.ucsc.whisper.core.DefaultUser WHERE
enabled==true
]]></query>
<query name="CountUsers"
language="javax.jdo.query.JDOQL"><![CDATA[
SELECT count( this ) FROM edu.ucsc.whisper.core.DefaultUser
]]></query>
</class>
</package>
</jdo>

I'm sorry, I have no idea. I suggest sending a test case that
reproduces the problem to support.

I bought Creative suite 5 a few years ago, my computer's hard drive failed, after It was fixed I re installed my program and it now says my Serial number is not valid.

I bought Creative suite 5 a few years ago, my computer's hard drive failed, after It was fixed I re installed my program and it now says my Serial number is not valid.
I'm on the last day of a 30 day trail... it won't take my serial number which is the same one that worked before

Contact support by web chat.
Mylenium

IMac Display failing after 1 year of average use.

I have a mid 2011 27" iMac (the one with thunderbolt) and the display is starting to fail after 1 year of average use (an hour of use every day on average). The display is now much dimmer on the left half of the display (the GPU sits underneath that portion) and also flickers the whole display now and then to a lower brightness.
I am about 45 days out of warranty and basically will have to cough up $500 to have it fixed by Apple. My questions are... Has anyone else ever had this happen to them? The genius bar employee thought that it was something he has seen happen to displays when exposed to heat over long periods of time. So basically playing starcraft 2 and doing video encoding killed my display if you believe that to be the cause.
Are there any conditions in which apple would recognize this as a manufacturing defect and fix it free of charge? Otherwise it looks like im writing a check for $500 next week.

Today a dark streak showed up on my display right in the middle. It is shaped like a zebra stripe but is dark grey and wont go away.
I too have a mid 2011 27" 3.4GHz i7 iMac with a 2GB Graphics card . Im about 50 days out of warranty.
Seems like its perfect coincidence for apple that 50 days after my warranty runs out, the most expensive thing to repair breaks.
After doing some research it seems like there is a lot of people with this model experiencing this problem.
Pretty sad that my 2005 iMac is holding up better than my brand new iMac.
Been saving up for it for like 4 years and I dont have the money to repair it.
I tried everything, I knew none of the stuff i tried would work but i still tried resetting the PRAM repairing disk permissions all that good stuff. I even have an air purifer/dehumidifier in my room so i dont know what caused it.
I didnt think i needed applcare because ive had my other imac since 2005 without a hiccup.
Ive rendered out 3d animations using the cpu at 100% for days and it still runs fine.
Havent even used my new imac for anything that would put stress on it.
What i do notice is that it runs hot all the time. ever since I got it. Sometimes just doing basic stuff such as browsing safari it can get so hot where i cant touch it. my GPU normally stays at around 70C and the hottest its been was 80C which is still safe. The alluminum is supposed to transfer heat better but all it does is retain heat more and get super hot. the old plastic one i have is 10x cooler.
What i did notice today tho when my screen problem happened, is that the GPU temperatue is at 50C and wont go above it. I monitor the temperature with istat and never have seen it at 50C and below unless i am just doing a fresh boot.
What really concerns me tho is how the screen went out so close to when my warranty expired.

Migration Assistant fails after showing 157 KB or 0 KB to transfer

I spent 4 days trying to get OS X Migration Assistant to successfully migrate between two desktop machines, both running Mavericks 10.9.3.
The two machines were connected by an ethernet cable, and all migrations would fail after 16-24 hours, with the progress bar stalling out at "Less than one minute remaining".
Before every failed transfer, Migration Assistant would inaccurately show "157 KB selected" for transfer if the "Computer & Network Settings" option was checked, or "0 KB selected" for transfer if only the "Applications" or "Documents & Data" options were checked.
I finally realized that the migrations were failing because I was opening and clicking through Migration Assistant on both the source and target machines at around the same time.
The eventual solution was to open Migration Assistant on the source machine first, and click through as far as I could until the source machine was actively looking for other machines on the network.
As long as I waited until then to open Migration Assistant on the target machine, it would correctly calculate the size of the files to be transferred and the migration would succeed.
So, the order in which you open Migration Assistant seems to make a big difference: source first, then target.
My problem is solved, but only after several days of hassle, so I wanted to post this in case other people had a similar issue.
(I tried many suggested fixes that did not work, included reinstalling OS X on the target machine, running disk repair and fixing permissions on both source and target, changing file sharing on the source machine to include the whole drive, trying to migrate Applications and Documents & Data separately, turning off wifi before the transfer, etc.)

Thanks for posting this. I was having the same problem. You saved me hours, maybe days, of frustration!

Clone to DEV fails after JRE plug-in upgrade to 1.7.0_75

DB - 11.2.0.3 - zLinux - s390
APP - 12.1.3 - Suse Linux - x86_64 - SP2
We're attempting to clone from our PROD environment to one of our DEV environments - and the clone steps fail.After laying the filesystem down, I run
perl adcfgclone.pl appsTier
and I receive the error......
sh: /ds01/mclebs/SID/apps/apps_st/comn/clone/bin/../jre/bin/java: No such file or directory
Then based a note I saw online, I rename java executable to java_old and create a symbolic link to the location of java (/usr/bin/java)
Then I try running the clone step (perl adcfgclone.pl appsTier) again
This time I receive the following errors in the ApplyAppsTier_05011354.log file as shown below.......
Started ApplyAppsTier at Fri May 01 13:54:38 CDT 2015
Version:
ApplyAppsTier.java : 120.4
# Calling ApplyAppsTechStack...
Executing runInstallDriver...
Started unzipping files...
Completed runInstallDriver.
Executing home registration for s_weboh_oh...
Registering using Registration Driver
/ds01/mclebs/$SID/apps/tech_st/10.1.3/appsutil/driver/regclone.drv
instantiate file:
   source : /ds01/mclebs/$SID/apps/tech_st/10.1.3/appsutil/template/adouiweboh.pl
   dest   : /ds01/mclebs/$SID/apps/tech_st/10.1.3/appsutil/clone/ouicli.pl
   backup : /ds01/mclebs/$SID/apps/tech_st/10.1.3/appsutil/clone/ouicli.pl to /dl01/mclebs/$SID/inst/apps/$SID_$HOSTNAME/out/ouicli.pl
   setting permissions: 700
   setting ownership: applmgr:ebsapps
instantiate file:
   source : /ds01/mclebs/$SID/apps/tech_st/10.1.3/appsutil/template/adlnkweboh.sh
   dest   : /ds01/mclebs/$SID/apps/tech_st/10.1.3/appsutil/clone/adlnkweboh.sh
   backup : /ds01/mclebs/$SID/apps/tech_st/10.1.3/appsutil/clone/adlnkweboh.sh to /dl01/mclebs/$SID/inst/apps/$SID_$HOSTNAME/out/adlnkweboh.sh
   setting permissions: 700
   setting ownership: applmgr:ebsapps
instantiate file:
   source : /ds01/mclebs/$SID/apps/tech_st/10.1.3/appsutil/template/txkstubcfg1013.pl
   dest   : /ds01/mclebs/$SID/apps/tech_st/10.1.3/appsutil/clone/txkstubcfg1013.pl
   backup : /ds01/mclebs/$SID/apps/tech_st/10.1.3/appsutil/clone/txkstubcfg1013.pl to /dl01/mclebs/$SID/inst/apps/$SID_$HOSTNAME/out/txkstubcfg1013.pl
   setting permissions: 700
   setting ownership: applmgr:ebsapps
instantiate file:
   source : /ds01/mclebs/$SID/apps/tech_st/10.1.3/appsutil/template/apachectl_sh_1013_oh.tmp
   dest   : /ds01/mclebs/$SID/apps/tech_st/10.1.3/Apache/Apache/bin/apachectl
   backup : /ds01/mclebs/$SID/apps/tech_st/10.1.3/Apache/Apache/bin/apachectl to /dl01/mclebs/$SID/inst/apps/$SID_$HOSTNAME/out/apachectl
   setting permissions: 700
   setting ownership: applmgr:ebsapps
Executing script in InstantiateFile:
/ds01/mclebs/$SID/apps/tech_st/10.1.3/perl/bin/perl -I /ds01/mclebs/$SID/apps/tech_st/10.1.3/perl/lib/5.8.3 -I /ds01/mclebs/$SID/apps/tech_st/10.1.3/perl/lib/site_perl/5.8.3 -I /ds01/mclebs/$SID/apps/apps_st/appl/au/12.0.0/perl -I /ds01/mclebs/$SID/apps/tech_st/10.1.3/Apache/Apache/mod_perl/lib/site_perl/5.8.3/i686-linux-thread-multi /ds01/mclebs/$SID/apps/tech_st/10.1.3/appsutil/clone/ouicli.pl
RC-50208: Exception in method TimedProcessProcess.run
Raised by oracle.apps.ad.util.TimedProcess$TimedProcessProcess: java.io.IOException: Cannot run program "/ds01/mclebs/$SID/apps/tech_st/10.1.3/perl/bin/perl": java.io.IOException: error=2, No such file or directory
script returned:
Exception in TimedProcess...Failed to execute command = /ds01/mclebs/$SID/apps/tech_st/10.1.3/perl/bin/perl -I /ds01/mclebs/$SID/apps/tech_st/10.1.3/perl/lib/5.8.3 -I /ds01/mclebs/$SID/apps/tech_st/10.1.3/perl/lib/site_perl/5.8.3 -I /ds01/mclebs/$SID/apps/apps_st/appl/au/12.0.0/perl -I /ds01/mclebs/$SID/apps/tech_st/10.1.3/Apache/Apache/mod_perl/lib/site_perl/5.8.3/i686-linux-thread-multi /ds01/mclebs/$SID/apps/tech_st/10.1.3/appsutil/clone/ouicli.pl -nopromptmsg****************************************************
Executing script in InstantiateFile:
/ds01/mclebs/$SID/apps/tech_st/10.1.3/appsutil/clone/adlnkweboh.sh
script returned:
adlnkweboh.sh started at Fri May 1 13:54:41 CDT 2015
Log file located at /dl01/mclebs/$SID/inst/apps/$SID_$HOSTNAME/logs/ora/10.1.3/install/make_05011354.log
Error while running adlnkweboh.sh.
return code = .9
Please check logfile located at /dl01/mclebs/$SID/inst/apps/$SID_$HOSTNAME/logs/ora/10.1.3/install/make_05011354.log
.end std out.
.end err out.
Executing script in InstantiateFile:
/ds01/mclebs/$SID/apps/tech_st/10.1.3/perl/bin/perl -I /ds01/mclebs/$SID/apps/tech_st/10.1.3/perl/lib/5.8.3 -I /ds01/mclebs/$SID/apps/tech_st/10.1.3/perl/lib/site_perl/5.8.3 -I /ds01/mclebs/$SID/apps/apps_st/appl/au/12.0.0/perl -I /ds01/mclebs/$SID/apps/tech_st/10.1.3/Apache/Apache/mod_perl/lib/site_perl/5.8.3/i686-linux-thread-multi /ds01/mclebs/$SID/apps/tech_st/10.1.3/appsutil/clone/txkstubcfg1013.pl
RC-50208: Exception in method TimedProcessProcess.run
Raised by oracle.apps.ad.util.TimedProcess$TimedProcessProcess: java.io.IOException: Cannot run program "/ds01/mclebs/$SID/apps/tech_st/10.1.3/perl/bin/perl": java.io.IOException: error=2, No such file or directory
script returned:
Exception in TimedProcess...Failed to execute command = /ds01/mclebs/$SID/apps/tech_st/10.1.3/perl/bin/perl -I /ds01/mclebs/$SID/apps/tech_st/10.1.3/perl/lib/5.8.3 -I /ds01/mclebs/$SID/apps/tech_st/10.1.3/perl/lib/site_perl/5.8.3 -I /ds01/mclebs/$SID/apps/apps_st/appl/au/12.0.0/perl -I /ds01/mclebs/$SID/apps/tech_st/10.1.3/Apache/Apache/mod_perl/lib/site_perl/5.8.3/i686-linux-thread-multi /ds01/mclebs/$SID/apps/tech_st/10.1.3/appsutil/clone/txkstubcfg1013.pl -nopromptmsg****************************************************

Hi,
Have you checked the file location of the executable - java and perl.
Check the file permissions.
export PATH for the JAVA/perl and retry.
Regards,
Krish

Upload to Blurb fails after exactly 30 minutes (There was an error uploading your book's pages...)

After exactly 30 minutes after the upload has started, I get this error:
There was an error uploading your book's pages. Would you like to try again? The choices given are "Retry Upload" and :"Cancel"
When I retry, the same thing happens - fails after exacly 30 minutes. I am using a window 7 pc (with Service Pack 1) and using Lightroom 5.4. I have turned off my firewall and antivirus programs, rebooted, and connected directly to my router (not wireless) and ensuring my pc does not go to sleep, but did nothing I try wil help.
Anyone else get this? Any ideas? Thanks!

Hello,
I had this problem as well - the upload to Blurb would not work. Creation of a PDF and export as JPEG in the book module worked.
For me, the solution was to turn off the Windows Firewall while uploading. Now it works!
Two-in-Love (Photographe de Mariage en Suisse Romande)
http://www.two-in-love.ch

Call fails after last update

Can anyone help me, after the last update from Apple to my iphone 3g I get call fail after call fail. It is getting embarassing at work where I rolled these phone out.

Standard troubleshooting is
1)Reset: reset your iPhone by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.
2)Restore as new or from backup: see page 141 of the manual for details...http://manuals.info.apple.com/enUS/iPhone_UserGuide.pdf
Note the last sentence of the Restore paragraph... "In iTunes, you can also restore from a backup without deleting data stored on iPhone."
Message was edited by: paulcb

"Save as... eps" fails after 253 pages

Hello,
Save long pdf as single eps pages fails after 253 pages (osx lion 10.7.5, acrobat pro X) getting error 11.
It's a known issue? How to work around?
Thanks a lot
ps. Acrobat pro 9 works fine exporting all pages

No prob saving the same document with AA9. All pages are exported from multipage pdf to single page eps files.
No images in document, just vectorial text I have to maintain ...and eps format it's ok.
With AA9 I've done this many times always with good result but now get this prob with AApro10.
Thanks for reply

Backup Fails after several successful days - errors "Device is not ready" & "The System cannot find the path specified"

Well I am back again, with another backup issue. After fixing one issue with the backup failing after a reboot, I have encountered another which is starting to cause me a lot of headaches.
The setup is thus - the backups run on a host machine running Windows Server 2012, this hosts three VM's (1x Server 2012 and 2x2008 Since the 19th of December a single backup drive has been attached for the backups (not ideal but the company had closed for
the holidays) up until the 26th these backups were working flawlessly.
On the 26th the backup completed with warnings, transferring a good 90% of the data to the backup (2/3 VMs). On the 27th it transferred a bit more at around 95% (2/3 VMs). On the 28th, it didn't completely backup a single VM.
On the 28th this error appeared in the event logs and after checking in the snap-in the same errors appear on the warning days as the errored day.
The backup operation that started at '‎2014‎-‎12‎-‎28T20:30:09.774946400Z' has failed with following error code '0x80780049' (None of the items included in backup were backed up.). Please review the event details for a solution, and then rerun the backup
operation once the issue is resolved.
Thanks in advance/

Hi,
Please check the detailed error message in the backup log files in C:\Windows\Logs\WindowsServerBackup. In additional, you could go through the similar thread to help troubleshoot this issue:
Windows 2012 Backup for HyperV failed with error code '0x80780049'
http://social.technet.microsoft.com/Forums/windowsserver/en-US/f1a0c9c6-7b4c-409c-b4da-c145b8b59eb1/windows-2012-backup-for-hyperv-failed-with-error-code-0x80780049?forum=winserverhyperv
Best Regards,
Mandy
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Source system RFC fails after transport

Hi all
in our QA system any transport containing a process chain causes the RFC connection to the source ECC6 system to fail after too many logon attempts.
This doesn't happen when we send the same transport to production.
Any ideas?
Regards
Hayley

Hi
thanks, but I had already checked out this note. This refers to the post processing of the transport on BW of client 000 logging onto the BW client to carry out changes, not the RFC connection to the BW ECC source system.
The transport goes through ok, and the process chain can be activated, however at this point we always notice that the ECC source system connection fails with an RFC error, as soon as we get the password reset and changed in SM59 it works ok.

Datasocket server seems to fail after continuous use.

The Datasocket server seems to fail after continuous use. (Labview 7.1 on XP)
I have a data acquistion system that collects data and presents it to the operator. Then I have from 1-3 remote units that can connect via DS to the acquistion unit to view the data. As a general rule things work dandy! I have the data published from the front panel of one VI and subscribed to by the remote VI(s). However it seems that after some indeterminent time the DS just stops publishing data and my remote units go into alarm indicating that they can no longer get data. If I shutdown and then restart the DS server then things seem to clear up and work again.
Anyone seen this type of problem? Unfortunately my app is pretty large and it acquires data from 26 field units so its not real practical to post the code!
I wonder if using the DS VI's would change performance as opposed to the front panel publishing/subscribing that I currently do? Or can DS just not handle the load, should I change to a TCP/IP handshaking?
Thanks!
~Gold

Here's the basic piece of code. The outer case structure was used because that program already had some DS related stuff and I wanted to wait before I start checking to avoid disturbing it. I added the array at the bottom for some logging so I could check when it happened, but I haven't been called for it since, so that array has proved unnecessary.
Try to take over the world!
Attachments:
DSerror.JPG ‏56 KB

My status change to pass from fail after 40 days. Microsoft Exam 74-409 Score

Microsoft update 74-409 exam.
My status change to pass from fail after 40 days..
Recived below email. is this possible ?
Dear Valued Customer,
You recently took Microsoft Exam 74-409: Server Virtualization with Windows Server Hyper-V and System Center. After close evaluation of the exam, we have made some revisions that resulted in a change to your exam results. We are pleased to inform you that your
status has been changed to ‘PASS’. This update will be reflected in your official transcript within two weeks. A new score report will be mailed to you within two weeks.
Thank you for taking this exam and for your support of our program.

Yes its possible, but its also possible that its a scam trying to entice you to provide information that could be used for identity theft. I would wait a couple weeks and then check your transcript on the MCP site. If the exam shows then it was
for real. If it doesn't then it was probably a fake message.
The reason it might be for real could be that someone challenged the clarity of one of the questions in their comments and Microsoft decided after looking into it that some question was misleading. This might have lead them to accept more than one
answer or to throw the question out. That could have modified your score in some way and promoted you above the Pass line. It is possible, but not likely.
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

Failing after bootcamp

Similar Messages

Maybe you are looking for