Failing by duplicate database from active database

Hallo,
i'm working with 11g on one server and want to duplicate a database in active mode.
what i do:
i create a new password-file using orapwd - orapwNEW
i create a new entry for ORANEW in tnsnames.ora and listener.ora
then i execute rman TARGET sys/[email protected] AUXILIARY sys/[email protected]
then rman> DUPLICATE TARGET DATABASE TO NEW FROM ACTIVE DATABASE SPFILE NOFILENAMECHECK;
then i've got the failure RMAN-06403, RMAN-04006, ORA-01034
whats the problem?
thanks in advance.

i think it is the problem that rman can't connect to the auxiliary db.
but what i must do?
in the documentation i found that:
The PASSWORD FILE option specifies that RMAN should copy the password file to the destination host. RMAN automatically copies the server parameter file to the destination host, starts the auxiliary instance with the server parameter file, copies all necessary database files and archived redo logs over the network to the destination host, and recovers the database. Finally, RMAN opens the database with the RESETLOGS option to create the online redo log.

Similar Messages

  • Rman clone duplicate database from active database

    Hi All,
    I read document saying that rman can duplicate database from active database (prod) to a remote server, so long as you configure listener and tnsname.
    I am working toward it.
    I met a problem, which is when i bring up auxiliary database in nomount mode, the listener service of that auxiliary database is in BLOCKED status, and throw out ora-12528 error when I rman auxiliary sys/[email protected] Isn't nomount mode the mode which auxiliary db is supposed to be in?
    (ora-12528: TNS:listener: all appropriate instances are blocking new connections)
    Thanks,
    milic

    You may have run into the same problem like I did recently:
    The (UR=A) clause in tnsnames.ora is intended to work with a dynamically registered handler so the use of SERVICE_NAME versus SID is preferred.
    ORA-12528: TNS listener BLOCKED - trying to duplicate database
    Also for further problems:
    RMAN 11gR2 duplicate database ORA-17627 ORA-01017 RMAN-03009 ORA-17628

  • Problem with duplicate target database from active database

    Hi all,
    i try duplicate database from active database
    - I have von target and auxiliary the same SYS Password
    - tnsping wogks in both directions fine
    - sqlplus to target and auxilairy works from both server
    - Metalink Solution 1056174.1 not help
    but in the Rman log become this error:
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of Duplicate Db command at
    RMAN-05501: aborting duplication of target database
    RMAN-03015: error occurred in stored script Memory Script
    RMAN-03009: failure of backup command on a1 channel at
    ORA-17629: Cannot connect to the remote database server
    ORA-17629: Cannot connect to the remote database server
    i do do :
    rman target sys/[email protected] auxiliary sys/PASSWD
    run
    ALLOCATE CHANNEL a1 DEVICE TYPE DISK;
    ALLOCATE AUXILIARY CHANNEL d1 DEVICE TYPE DISK;
    duplicate target database to XXXXX
    from active database
    DB_FILE_NAME_CONVERT ('/XXXX/XXXX/XXXXXX','/XXXXX/XXXXXX/XXXXX/')
    spfile
    parameter_value_convert '/XXXX/','/XXXXX/'
    set log_file_name_convert '/XXXXX/','/XXXXX/'
    any Idea ?
    Best Regards

    Don't know if this will help, but I use the connect string below to connect, then run the command below. This is, of course, after the rman backup from the prod system has been copied to the flash_recovery_area of the aux database. All file paths are the same between the two systems. Works like a charm most nights. The local tnsnames file on the rman catalog server has working entries for @SDPROD, @rman and @SDSTB.
    [Connect String]
    rman TARGET SYS/[email protected] CATALOG rman/[email protected] AUXILIARY SYS/[email protected] cmdfile D:\cladmin\Scripts\DuplicateSD.rcv LOG=D:\cladmin\Logs\DuplicateSD.f
    [Command file block]
    RUN{
    ALLOCATE AUXILIARY CHANNEL aux1 DEVICE TYPE DISK;
    DUPLICATE TARGET DATABASE TO DATABASENAME
    NOFILENAMECHECK;
    Edited by: user522620 on Jun 27, 2011 6:36 PM

  • Duplicate database from active database in 11g?

    Does anyone know if it's possible to clone a database from stby by issuing RMAN duplicate database FROM ACTIVE DATABASE command in 11g?
    I know it's possible from primary to create stby.
    Thanks in advance

    You may have run into the same problem like I did recently:
    The (UR=A) clause in tnsnames.ora is intended to work with a dynamically registered handler so the use of SERVICE_NAME versus SID is preferred.
    ORA-12528: TNS listener BLOCKED - trying to duplicate database
    Also for further problems:
    RMAN 11gR2 duplicate database ORA-17627 ORA-01017 RMAN-03009 ORA-17628

  • Issue in configuring Standby Database from Active database in 11g by RMAN

    POSTED THE SAME IN DATA GUARD CATEGORY UNABLE TO DELETE
    Hi All,
    I am facing issue in creating the standby database from Active database using RMAN and getting the below issue after i executed the duplicate command.
    Version of Database:11g(11.2.0.1.0)
    Operating System:Linux 5
    Error:
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of Duplicate Db command at 12/21/2012 17:26:52
    RMAN-03015: error occurred in stored script Memory Script
    RMAN-04006: error from auxiliary database: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
    Primary Database Entries:
    Tnsentry:
    SONYPRD =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = sonyprd.localdomain)(UR=A)
    SONYPRDSTBY =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = sonyprdstby)(UR=A)
    Listner Entry:
    SID_LIST_SONYPRD =
    (SID_LIST =
    (SID_DESC =
    (SID_NAME = PLSExtproc)
    (ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_1)
    (PROGRAM = extproc)
    (SID_DESC =
    (SID_NAME = SONYPRD)
    (GLOBAL_DBNAME = SONYPRD)
    Auxiliary Details:
    Tns Entry:
    SONYPRD =
    (DESCRIPTION =
    # (ADDRESS = (PROTOCOL = TCP)(HOST = oracle11g.localdomain)(PORT = 1521))
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = sonyprd.localdomain)
    SONYPRDSTBY =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = sonyprdstby)(UR=A)
    Listener Entry in auxiliary:
    SID_LIST_SONYPRDSTBY =
    (SID_LIST =
    (SID_DESC =
    (GLOBAL_DBNAME = SONYPRDSTBY)
    (ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_1)
    (SID_NAME = SONYPRDSTBY)
    TNSPING from Primary DB:
    [[email protected] ~]$ tnsping sonyprdstby
    TNS Ping Utility for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 17:39:28
    Copyright (c) 1997, 2009, Oracle. All rights reserved.
    Used parameter files:
    /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/sqlnet.ora
    Used TNSNAMES adapter to resolve the alias
    Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = sonyprdstby)(UR=A)))
    OK (0 msec)
    TNSPING from Auxuliary server
    [[email protected] ~]$ tnsping sonyprd
    TNS Ping Utility for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 17:40:19
    Copyright (c) 1997, 2009, Oracle. All rights reserved.
    Used parameter files:
    Used TNSNAMES adapter to resolve the alias
    Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = sonyprd.localdomain)))
    OK (10 msec)
    Script Used for duplicate:
    run {
    allocate channel prmy1 type disk;
    allocate channel prmy2 type disk;
    allocate channel prmy3 type disk;
    allocate channel prmy4 type disk;
    allocate auxiliary channel stby type disk;
    duplicate target database for standby from active database
    spfile
    parameter_value_convert 'sonyprd','sonyprdstby'
    set db_unique_name='sonyprdstby'
    set db_file_name_convert='/sonyprd/','/sonyprdstby/'
    set log_file_name_convert='/sonyprd/','/sonyprdstby/'
    set control_files='/u01/app/oracle/oradata/control01.ctl'
    set log_archive_max_processes='5'
    set fal_client='sonyprdstby'
    set fal_server='sonyprd'
    set standby_file_management='AUTO'
    set log_archive_config='dg_config=(sonyprd,sonyprdstby)'
    set log_archive_dest_2='service=sonyprd ASYNC valid_for=(ONLINE_LOGFILE,PRIMARY_ROLE) db_unique_name=sonyprd'
    Tried the script from both Primary and auxiliary but no luck
    [[email protected] admin]$ rman target sys/[email protected] auxiliary sys/*****@sonyprdstby
    Recovery Manager: Release 11.2.0.1.0 - Production on Fri Dec 21 17:26:24 2012
    Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
    connected to target database: SONYPRD (DBID=3131093559)
    connected to auxiliary database: SONYPRD (not mounted)
    Listener Status from primary:
    [[email protected] ~]$ lsnrctl status
    LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 18:08:56
    Copyright (c) 1991, 2009, Oracle. All rights reserved.
    Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
    Start Date 20-DEC-2012 17:42:17
    Uptime 1 days 0 hr. 26 min. 41 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Listener Parameter File /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
    Listener Log File /u01/app/oracle/diag/tnslsnr/localhost/listener/alert/log.xml
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1521)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost.localdomain)(PORT=1521)))
    Services Summary...
    Service "sonyprd.localdomain" has 1 instance(s).
    Instance "sonyprd", status READY, has 1 handler(s) for this service...
    Service "sonyprdXDB.localdomain" has 1 instance(s).
    Instance "sonyprd", status READY, has 1 handler(s) for this service...
    The command completed successfully
    Listener Status from Standby when database bring to Nomount state:
    [[email protected] admin]$ lsnrctl status
    LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 18:11:54
    Copyright (c) 1991, 2009, Oracle. All rights reserved.
    Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
    Start Date 21-DEC-2012 16:13:47
    Uptime 0 days 1 hr. 58 min. 6 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Listener Parameter File /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
    Listener Log File /u01/app/oracle/diag/tnslsnr/oracle11gstby/listener/alert/log.xml
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=oracle11gstby)(PORT=1521)))
    Services Summary...
    Service "sonyprdstby" has 1 instance(s).
    Instance "sonyprdstby", status BLOCKED, has 1 handler(s) for this service...
    The command completed successfully
    Please provide any work arounds to proceed further in creating the standby database.
    Thanks,
    Ram.
    Edited by: 895188 on Dec 21, 2012 5:50 PM
    Edited by: 895188 on Dec 21, 2012 6:09 PM
    Edited by: 895188 on Dec 21, 2012 6:22 PM

    Hello;
    Script has to be run from auxiliary.
    Great details, but what I don't see is how you connect in RMAN.
    Example
    Start RMAN
    $ORACLE_HOME/bin/rman target=sys/@recover2 auxiliary=sys/@reclone
    Recovery Manager: Release 11.2.0.2.0 - Production on Wed Feb 22 14:50:31 2012
    Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
    connected to target database: RECOVER2 (DBID=3806912436)
    connected to auxiliary database: RECLONE (not mounted)Nothing in your tnsnames or listener jumps out as wrong. I copied them into my text editor and compared against my working ones.
    Generally for active duplication I start the future standby on a pfile NOMOUNT.
    Auxiliary Instance Initialization Parameters Needed :
    DB_NAME
    CONTROL_FILES
    DB_BLOCK_SIZE
    ( add extra parameters like DB_FILE_NAME_CONVERT and LOG_FILE_NAME_CONVERT instead of using the SET command - clean up standby spfile right after duplication )
    Then start RMAN and finally run a single line duplication command.
    $ORACLE_HOME/bin/rman target=sys/@primary auxiliary=sys/@standby
    RMAN>duplicate target database for standby from active database NOFILENAMECHECK;Best Regards
    mseberg

  • Issue in creating the standby database from Active database using RMAN

    Hi All,
    I am facing issue in creating the standby database from Active database using RMAN and getting the below issue after i executed the duplicate command.
    Version of Database:11g(11.2.0.1.0)
    Operating System:Linux 5
    Error:
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of Duplicate Db command at 12/21/2012 17:26:52
    RMAN-03015: error occurred in stored script Memory Script
    RMAN-04006: error from auxiliary database: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
    Primary Database Entries:
    Tnsentry:
    SONYPRD =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = sonyprd.localdomain)(UR=A)
    SONYPRDSTBY =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = sonyprdstby)(UR=A)
    Listner Entry:
    SID_LIST_SONYPRD =
    (SID_LIST =
    (SID_DESC =
    (SID_NAME = PLSExtproc)
    (ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_1)
    (PROGRAM = extproc)
    (SID_DESC =
    (SID_NAME = SONYPRD)
    (GLOBAL_DBNAME = SONYPRD)
    Auxiliary Details:
    Tns Entry:
    SONYPRD =
    (DESCRIPTION =
    # (ADDRESS = (PROTOCOL = TCP)(HOST = oracle11g.localdomain)(PORT = 1521))
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = sonyprd.localdomain)
    SONYPRDSTBY =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = sonyprdstby)(UR=A)
    Listener Entry in auxiliary:
    SID_LIST_SONYPRDSTBY =
    (SID_LIST =
    (SID_DESC =
    (GLOBAL_DBNAME = SONYPRDSTBY)
    (ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_1)
    (SID_NAME = SONYPRDSTBY)
    TNSPING from Primary DB:
    [[email protected] ~]$ tnsping sonyprdstby
    TNS Ping Utility for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 17:39:28
    Copyright (c) 1997, 2009, Oracle. All rights reserved.
    Used parameter files:
    /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/sqlnet.ora
    Used TNSNAMES adapter to resolve the alias
    Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = sonyprdstby)(UR=A)))
    OK (0 msec)
    TNSPING from Auxuliary server
    [[email protected] ~]$ tnsping sonyprd
    TNS Ping Utility for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 17:40:19
    Copyright (c) 1997, 2009, Oracle. All rights reserved.
    Used parameter files:
    Used TNSNAMES adapter to resolve the alias
    Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = sonyprd.localdomain)))
    OK (10 msec)
    Script Used for duplicate:
    run {
    allocate channel prmy1 type disk;
    allocate channel prmy2 type disk;
    allocate channel prmy3 type disk;
    allocate channel prmy4 type disk;
    allocate auxiliary channel stby type disk;
    duplicate target database for standby from active database
    spfile
    parameter_value_convert 'sonyprd','sonyprdstby'
    set db_unique_name='sonyprdstby'
    set db_file_name_convert='/sonyprd/','/sonyprdstby/'
    set log_file_name_convert='/sonyprd/','/sonyprdstby/'
    set control_files='/u01/app/oracle/oradata/control01.ctl'
    set log_archive_max_processes='5'
    set fal_client='sonyprdstby'
    set fal_server='sonyprd'
    set standby_file_management='AUTO'
    set log_archive_config='dg_config=(sonyprd,sonyprdstby)'
    set log_archive_dest_2='service=sonyprd ASYNC valid_for=(ONLINE_LOGFILE,PRIMARY_ROLE) db_unique_name=sonyprd'
    Tried the script from both Primary and auxiliary but no luck
    [[email protected] admin]$ rman target sys/[email protected] auxiliary sys/*****@sonyprdstby
    Recovery Manager: Release 11.2.0.1.0 - Production on Fri Dec 21 17:26:24 2012
    Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
    connected to target database: SONYPRD (DBID=3131093559)
    connected to auxiliary database: SONYPRD (not mounted)
    Listener Status from primary:
    [[email protected] ~]$ lsnrctl status
    LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 18:08:56
    Copyright (c) 1991, 2009, Oracle. All rights reserved.
    Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
    Start Date 20-DEC-2012 17:42:17
    Uptime 1 days 0 hr. 26 min. 41 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Listener Parameter File /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
    Listener Log File /u01/app/oracle/diag/tnslsnr/localhost/listener/alert/log.xml
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1521)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost.localdomain)(PORT=1521)))
    Services Summary...
    Service "sonyprd.localdomain" has 1 instance(s).
    Instance "sonyprd", status READY, has 1 handler(s) for this service...
    Service "sonyprdXDB.localdomain" has 1 instance(s).
    Instance "sonyprd", status READY, has 1 handler(s) for this service...
    The command completed successfully
    Listener Status from Standby when database bring to Nomount state:
    [[email protected] admin]$ lsnrctl status
    LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 18:11:54
    Copyright (c) 1991, 2009, Oracle. All rights reserved.
    Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
    Start Date 21-DEC-2012 16:13:47
    Uptime 0 days 1 hr. 58 min. 6 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Listener Parameter File /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
    Listener Log File /u01/app/oracle/diag/tnslsnr/oracle11gstby/listener/alert/log.xml
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=oracle11gstby)(PORT=1521)))
    Services Summary...
    Service "sonyprdstby" has 1 instance(s).
    Instance "sonyprdstby", status BLOCKED, has 1 handler(s) for this service...
    The command completed successfully
    Please provide any work arounds to proceed further in creating the standby database.
    Thanks,
    Ram.

    Pl do not post duplicates - Issue in configuring Standby Database from Active database in 11g by RMAN

  • Creating a duplicated database from active database

    I'm having problem trying to duplicate a database from a target database (PROD) to the auxiliary one (AUX).
    This is what I've configured:
    listener.ora
    SID_LIST_LISTENER =
      (SID_LIST =
        (SID_DESC =
          (GLOBAL_DBNAME = PROD)
          (ORACLE_HOME = /u01/app/oracle/product/11.2.0/db_1/)
          (SID_NAME = PROD)
        (SID_DESC =
          (GLOBAL_DBNAME = AUX)
          (ORACLE_HOME = /u01/app/oracle/product/11.2.0/db_1/)
          (SID_NAME = AUX)
    LISTENER =
      (DESCRIPTION_LIST =
        (DESCRIPTION =
          (ADDRESS = (PROTOCOL = TCP)(HOST = my_ip)(PORT = 1521))
    ADR_BASE_LISTENER = /u01/app/oracletnsnames.ora
    AUX =
      (DESCRIPTION =
        (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = my_ip)(PORT = 1521)))
        (CONNECT_DATA =
          (SERVER = DEDICATED)
          (SERVICE_NAME = AUX)
    PROD =
      (DESCRIPTION =
        (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = my_ip)(PORT = 1521)))
        (CONNECT_DATA =
          (SERVER = DEDICATED)
          (SERVICE_NAME = PROD)
      )/u01/app/oracle/product/11.2.0/db_1/dbs/initAUX.ora
    db_name='AUX'
    cp /u01/app/oracle/product/11.2.0/db_1/dbs/orapwPROD /u01/app/oracle/product/11.2.0/db_1/dbs/orapwAUX- Started PROD database (open and in archive log mode)
    - Started AUX database (in nomount mode and usinf pfile='/u01/app/oracle/product/11.2.0/db_1/dbs/initAUX.ora')
    But when I issue the following command I get connected to auxiliary database (not started) :
    rman target sys/[email protected] auxiliary sys/[email protected]
    connected to target database: PROD (DBID=196032563)
    connected to auxiliary database (not started)And executing the duplicate command it returns:
    RMAN> duplicate target database to AUX from active database spfile parameter_value_convert '/DATA/PROD/','+DG_DATA_AUX' set db_create_file_dest='+DG_DATA_AUX';
    Starting Duplicate Db at 2010-09-28:13:36:50
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of Duplicate Db command at 09/28/2010 13:36:50
    RMAN-06403: could not obtain a fully authorized session
    RMAN-04006: error from auxiliary database: ORA-01034: ORACLE not available
    ORA-27101: shared memory realm does not exist
    Linux-x86_64 Error: 2: No such file or directorylsnrctl stopped and restarted several times. This is the output of lsnrctl status command:
    LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 28-SEP-2010 13:45:14
    Copyright (c) 1991, 2009, Oracle.  All rights reserved.
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=my_ip)(PORT=1521)))
    STATUS of the LISTENER
    Alias                     LISTENER
    Version                   TNSLSNR for Linux: Version 11.2.0.1.0 - Production
    Start Date                28-SEP-2010 12:44:50
    Uptime                    0 days 0 hr. 1 min. 22 sec
    Trace Level               off
    Security                  ON: Local OS Authentication
    SNMP                      OFF
    Listener Parameter File   /u01/app/oracle/product/11.2.0/db_1/network/admin/listener.ora
    Listener Log File         /u01/app/oracle/diag/tnslsnr/my_ip/listener/alert/log.xml
    Listening Endpoints Summary...
      (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=my_ip)(PORT=1521)))
    Services Summary...
    Service "PROD" has 1 instance(s).
      Instance "PROD", status READY, has 1 handler(s) for this service...
    Service "PRODXDB" has 1 instance(s).
      Instance "PROD", status READY, has 1 handler(s) for this service...
    Service "AUX" has 2 instance(s).
      Instance "AUX", status UNKNOWN, has 1 handler(s) for this service...
      Instance "AUX", status BLOCKED, has 1 handler(s) for this service...
    The command completed successfullyI have already created a duplicated database from a backup of the target one and the configuration was quite the same: the differences are that using active database duplication I needed to use orapw files (and they need to have the same password) and that I needed to connect using Oracle Net service name to connect to the auxiliary instance.. otherwise I got:
    export ORACLE_SID=AUX
    rman target sys/[email protected] auxiliary sys/oracle
    connected to target database: PROD (DBID=196032563)
    connected to auxiliary database: AUX (not mounted)
    RMAN> duplicate target database to AUX from active database spfile parameter_value_convert '/DATA/PROD/','+DG_DATA_AUX' set db_create_file_dest='+DG_DATA_AUX';
    Starting Duplicate Db at 2010-09-28:12:27:21
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of Duplicate Db command at 09/28/2010 12:27:21
    RMAN-06217: not connected to auxiliary database with a net service nameWhere am I wrong?

    Thanks for your support. My instance was and is still in nomount mode. But I'm not able to connect this instance as auxiliary and in the right expected mode:
    connected to auxiliary database: AUX (not mounted)
    [[email protected]_ip oracle]$ env|grep SID      
    ORACLE_SID=AUX
    [[email protected]_ip oracle]$ sqlplus / as sysdba
    SQL*Plus: Release 11.2.0.1.0 Production on Wed Sep 29 10:28:44 2010
    Copyright (c) 1982, 2009, Oracle.  All rights reserved.
    Connected to:
    Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
    With the Partitioning, OLAP, Data Mining and Real Application Testing options
    idle> shutdown immediate
    ORA-01507: database not mounted
    ORACLE instance shut down.
    idle> startup nomount pfile=/u01/app/oracle/product/11.2.0/db_1/dbs/initAUX.ora
    ORACLE instance started.
    Total System Global Area  217157632 bytes
    Fixed Size                  2211928 bytes
    Variable Size             159387560 bytes
    Database Buffers           50331648 bytes
    Redo Buffers                5226496 bytes

  • RMAN duplicate target database from active database - performance problem

    Hello. I’m running into a major performance problem when trying to duplicate a database from a target located inside our firewall to an auxiliary located outside our firewall. Both target and auxiliary are located in the same equipment room just on different subnets. Previously I had the auxiliary located on the same subnet as the target behind the firewall and duplicating a 4.5T database took 12 hours. Now with the auxiliary moved outside the firewall attempting to duplicate the same 4.5T database is estimated to exceed 35 hours. The target is a RAC instance using ASM and so is the auxiliary. Ping, tnsping, traceroutes to and from target and auxiliary all indicate no problem or latency. Any ideas on things to consider while hunting for this elusive performance decrease?
    Thanks in advance.

    It would obviously appear network related. Have you captured any network/firewall metrics? Are all components set to full duplex? Would it be possible to take the firewall down temporarily and then test the throughput? Do you encounter any latency if you were to copy a large file across the subnets?
    You may want to check V$RMAN_BACKUP_JOB_DETAILS, V$BACKUP_SYNC_IO or V$BACKUP_ASYNC_IO when the backup is running.

  • Duplicate target from active database session terminate after 500gb data cp

    i have 1 tb db. for example i execute the duplicate command from activate standby database.after 500gb datafile copy the session terminate due to some bottle neck ( network) .is it possible to resume the job again means job again starded from the previous stage .
    thanks

    913779 wrote:
    i have 1 tb db. for example i execute the duplicate command from activate standby database.after 500gb datafile copy the session terminate due to some bottle neck ( network) .is it possible to resume the job again means job again starded from the previous stage .
    thanksCheck the documentation
    http://docs.oracle.com/cd/E11882_01/backup.112/e10642/rcmdupdb.htm#BGBEFJHH

  • Duplicate database for standby from active database

    I'm running 11.1.0.7. Has anybody ever duplicated a standby database from active database and the active database being a physical standby open for read only with active dataguard instead of a primary dataguard database?
    The key here is location. The primary is located at a remote site where network bandwidth is inadequate for fast copy of database. The active standby database is at same site where I would like to build the new physical standby.

    I don't think you can, because "You cannot CONNECT RMAN to the standby database and then use DUPLICATE ... FOR STANDBY to create an additional standby database " and you can't fake it out by getting a controlfile from the primary because the controlfile has to match up with the backup and can't be a standby.
    But I'm wondering if you could failover to the standby, duplicate, fail back, then... oh well, that will never work either, incarnation problem.
    Snapshot standby? Could one back it up, then flashback restored new standby, change dbid? I would guess there would be an SCN problem, but don't know enough about it.

  • Rman duplicate from active database slow

    Hi,
    I am doing a duplicate database from active database, it seems to either slow or hanging. Can someone suggest any tips or pointers to debug this issue?
    Source: 11gR2 3-node RAC (only one instance running) on Solaris 10, about 25TB
    Target: 1-node, 11gR2 on Solaris 10
    Thanks!

    source:
           SID    SERIAL#    CONTEXT      SOFAR  TOTALWORK %_complete
          1555       7013          1   43730494  142245833      30.74
          2332       8079          1   44307262  102713507      43.14
          2235      10987          1   47052222  105912610      44.43
          2622       5033          1   48406910   86329752      56.07
          2040      49651          1   49519038  111411200      44.45
          1846      20307          1   43488574  138674977      31.36
          1459      26683          1   44936702  272716852      16.48
    7 rows selected.
    Target: no rows

  • RMAN DUPLICATE FOR STANDBY FROM ACTIVE DATABASE fails

    Hello
    I'm trying to use RMAN DUPLICATE to create a standby database using Oracle 11.2.0.3 with PSU 6 on HP-UX.
    Primary is 2 node RAC. Standby is also 2 node RAC.
    Standby database instance is started in nomount mode.
    I use:
    duplicate target database for standby from active database
      spfile
      <some spfile parameters>
    with PFILE I get:
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of Duplicate Db command at 10/01/2013 12:41:13
    RMAN-05501: aborting duplication of target database
    RMAN-03015: error occurred in stored script Memory Script
    RMAN-03009: failure of sql command on clone_default channel at 10/01/2013 12:41:13
    RMAN-11003: failure during parse/execution of SQL statement: alter system set spfile= '/opt/oracle/db11203/dbs/spfileCU1.ora'
    ORA-02097: parameter cannot be modified because specified value is invalid
    ORA-01565: error in identifying file '/opt/oracle/db11203/dbs/spfileCU1.ora'
    ORA-27037: unable to obtain file status
    HPUX-ia64 Error: 2: No such file or directory
    With SPFILE I get;
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of Duplicate Db command at 10/01/2013 13:06:34
    RMAN-05501: aborting duplication of target database
    RMAN-05537: DUPLICATE without TARGET connection when auxiliary instance is started with spfile cannot use SPFILE clause
    But I do have RMAN connexion to target database.
    Thanks for your help.

    Here is the output beginning of the script which clearly shows that I'm always connected to target database:
    Recovery Manager: Release 11.2.0.3.0 - Production on Tue Oct 1 13:05:47 2013
    Copyright (c) 1982, 2011, Oracle and/or its affiliates.  All rights reserved.
    connected to target database: CU (DBID=1143962925)
    connected to auxiliary database: CU (not mounted)
    RMAN> set echo on
    2> run
    3> {
    4>  configure device type disk parallelism 10;
    5>   allocate channel pr1 type disk;
    6>   allocate channel pr2 type disk;
    7>   allocate channel pr3 type disk;
    8>   allocate channel pr4 type disk;
    9>   allocate channel pr5 type disk;
    10>   allocate channel pr6 type disk;
    11>   allocate channel pr7 type disk;
    12>   allocate channel pr8 type disk;
    13>   allocate channel pr9 type disk;
    14>   allocate channel pr10 type disk;
    15>   allocate auxiliary channel st1 type disk;
    16>   allocate auxiliary channel st2 type disk;
    17>   allocate auxiliary channel st3 type disk;
    18>   allocate auxiliary channel st4 type disk;
    19>   allocate auxiliary channel st5 type disk;
    20>   allocate auxiliary channel st6 type disk;
    21>   allocate auxiliary channel st7 type disk;
    22>   allocate auxiliary channel st8 type disk;
    23>   allocate auxiliary channel st9 type disk;
    24>   allocate auxiliary channel st10 type disk;
    25>   duplicate target database for standby from active database
    26>   spfile

  • Error during "duplicate target ... from active database"

    hi:
    RMAN duplicate failure after the auxiliary instance mounted,we want to create a physical standby database .
    Platform: solaris10 spark 64bit
    Version: 11.2.0.1.5 (both primary and standby)
    thank you..
    RMAN log:
    rman target sys/[email protected]_primary auxiliary sys/[email protected]_standby_tt
    Recovery Manager: Release 11.2.0.1.0 - Production on Thu Aug 30 15:40:06 2012
    Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
    connected to target database: HIS (DBID=3271178181)
    connected to auxiliary database: HIS (not mounted)
    RMAN> duplicate target database for standby from active database;
    Starting Duplicate Db at 30-AUG-12
    using target database control file instead of recovery catalog
    allocated channel: ORA_AUX_DISK_1
    channel ORA_AUX_DISK_1: SID=2833 device type=DISK
    allocated channel: ORA_AUX_DISK_2
    channel ORA_AUX_DISK_2: SID=3399 device type=DISK
    allocated channel: ORA_AUX_DISK_3
    channel ORA_AUX_DISK_3: SID=3966 device type=DISK
    allocated channel: ORA_AUX_DISK_4
    channel ORA_AUX_DISK_4: SID=3 device type=DISK
    contents of Memory Script:
    backup as copy reuse
    targetfile '/u01/oracle/product/11.2.0/db_1/dbs/orapwhis' auxiliary format
    '/u01/app/oracle/product/11.2.0/db_1/dbs/orapwhis' ;
    executing Memory Script
    Starting backup at 30-AUG-12
    allocated channel: ORA_DISK_1
    channel ORA_DISK_1: SID=1570 device type=DISK
    allocated channel: ORA_DISK_2
    channel ORA_DISK_2: SID=1708 device type=DISK
    allocated channel: ORA_DISK_3
    channel ORA_DISK_3: SID=1851 device type=DISK
    allocated channel: ORA_DISK_4
    channel ORA_DISK_4: SID=1995 device type=DISK
    Finished backup at 30-AUG-12
    contents of Memory Script:
    backup as copy current controlfile for standby auxiliary format '/u01/app/oradata/his/control01.ctl';
    restore clone controlfile to '/u01/app/oradata/his/control02.ctl' from
    '/u01/app/oradata/his/control01.ctl';
    restore clone controlfile to '/u01/app/oradata/his/control03.ctl' from
    '/u01/app/oradata/his/control01.ctl';
    executing Memory Script
    Starting backup at 30-AUG-12
    using channel ORA_DISK_1
    using channel ORA_DISK_2
    using channel ORA_DISK_3
    using channel ORA_DISK_4
    channel ORA_DISK_1: starting datafile copy
    copying standby control file
    output file name=/export/home/oracle/snap.f tag=TAG20120830T154059 RECID=9 STAMP=792690060
    channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:03
    Finished backup at 30-AUG-12
    Starting restore at 30-AUG-12
    using channel ORA_AUX_DISK_1
    using channel ORA_AUX_DISK_2
    using channel ORA_AUX_DISK_3
    using channel ORA_AUX_DISK_4
    channel ORA_AUX_DISK_2: skipped, AUTOBACKUP already found
    channel ORA_AUX_DISK_3: skipped, AUTOBACKUP already found
    channel ORA_AUX_DISK_4: skipped, AUTOBACKUP already found
    channel ORA_AUX_DISK_1: copied control file copy
    Finished restore at 30-AUG-12
    Starting restore at 30-AUG-12
    using channel ORA_AUX_DISK_1
    using channel ORA_AUX_DISK_2
    using channel ORA_AUX_DISK_3
    using channel ORA_AUX_DISK_4
    channel ORA_AUX_DISK_2: skipped, AUTOBACKUP already found
    channel ORA_AUX_DISK_3: skipped, AUTOBACKUP already found
    channel ORA_AUX_DISK_4: skipped, AUTOBACKUP already found
    channel ORA_AUX_DISK_1: copied control file copy
    Finished restore at 30-AUG-12
    contents of Memory Script:
    sql clone 'alter database mount standby database';
    executing Memory Script
    sql statement: alter database mount standby database
    contents of Memory Script:
    set newname for tempfile 1 to
    "/u01/app/oradata/his/temp.266.750421813";
    set newname for tempfile 2 to
    "/u01/app/oradata/his/ts_temp_patrol.298.750425277";
    set newname for tempfile 3 to
    "/u01/app/oradata/his/ts_his_temp.296.750427905";
    set newname for tempfile 4 to
    "/u01/app/oradata/his/ts_tjjk_temp.282.750427917";
    set newname for tempfile 5 to
    "/u01/app/oradata/his/ts_temp_shuhao.595.782919539";
    switch clone tempfile all;
    set newname for datafile 1 to
    "/u01/app/oradata/his/system.256.750421615";
    set newname for datafile 2 to
    "/u01/app/oradata/his/sysaux.257.750421615";
    set newname for datafile 3 to
    "/u01/app/oradata/his/undotbs1.258.750421615";
    set newname for datafile 4 to
    "/u01/app/oradata/his/users.259.750421615";
    set newname for datafile 5 to
    "/u01/app/oradata/his/ts_his.280.750425023";
    set newname for datafile 6 to
    "/u01/app/oradata/his/ts_his_index.281.750425025";
    set newname for datafile 7 to
    "/u01/app/oradata/his/system.569.754307341";
    set newname for datafile 8 to
    "/u01/app/oradata/his/ts_bj.283.750425027";
    set newname for datafile 9 to
    "/u01/app/oradata/his/ts_gt.284.750425027";
    set newname for datafile 10 to
    "/u01/app/oradata/his/ts_fx.285.750425027";
    set newname for datafile 11 to
    "/u01/app/oradata/his/ts_uap.286.750425029";
    set newname for datafile 12 to
    "/u01/app/oradata/his/ts_gkxj.287.750425029";
    set newname for datafile 13 to
    "/u01/app/oradata/his/ts_xejj.288.750425031";
    set newname for datafile 14 to
    "/u01/app/oradata/his/ts_zdzyrz.289.750425031";
    set newname for datafile 15 to
    "/u01/app/oradata/his/ts_zj.290.750425033";
    set newname for datafile 16 to
    "/u01/app/oradata/his/ts_jgcp.291.750425033";
    set newname for datafile 17 to
    "/u01/app/oradata/his/ts_gtbj.292.750425033";
    set newname for datafile 18 to
    "/u01/app/oradata/his/ts_base.293.750425035";
    set newname for datafile 19 to
    "/u01/app/oradata/his/ts_exdata.294.750425035";
    set newname for datafile 20 to
    "/u01/app/oradata/his/ts_tjjk.295.750425037";
    set newname for datafile 21 to
    "/u01/app/oradata/his/ts_shuhao.594.782919537";
    set newname for datafile 22 to
    "/u01/app/oradata/his/ts_patrol.297.750425037";
    backup as copy reuse
    datafile 1 auxiliary format
    "/u01/app/oradata/his/system.256.750421615" datafile
    2 auxiliary format
    "/u01/app/oradata/his/sysaux.257.750421615" datafile
    3 auxiliary format
    "/u01/app/oradata/his/undotbs1.258.750421615" datafile
    4 auxiliary format
    "/u01/app/oradata/his/users.259.750421615" datafile
    5 auxiliary format
    "/u01/app/oradata/his/ts_his.280.750425023" datafile
    6 auxiliary format
    "/u01/app/oradata/his/ts_his_index.281.750425025" datafile
    7 auxiliary format
    "/u01/app/oradata/his/system.569.754307341" datafile
    8 auxiliary format
    "/u01/app/oradata/his/ts_bj.283.750425027" datafile
    9 auxiliary format
    "/u01/app/oradata/his/ts_gt.284.750425027" datafile
    10 auxiliary format
    "/u01/app/oradata/his/ts_fx.285.750425027" datafile
    11 auxiliary format
    "/u01/app/oradata/his/ts_uap.286.750425029" datafile
    12 auxiliary format
    "/u01/app/oradata/his/ts_gkxj.287.750425029" datafile
    13 auxiliary format
    "/u01/app/oradata/his/ts_xejj.288.750425031" datafile
    14 auxiliary format
    "/u01/app/oradata/his/ts_zdzyrz.289.750425031" datafile
    15 auxiliary format
    "/u01/app/oradata/his/ts_zj.290.750425033" datafile
    16 auxiliary format
    "/u01/app/oradata/his/ts_jgcp.291.750425033" datafile
    17 auxiliary format
    "/u01/app/oradata/his/ts_gtbj.292.750425033" datafile
    18 auxiliary format
    "/u01/app/oradata/his/ts_base.293.750425035" datafile
    19 auxiliary format
    "/u01/app/oradata/his/ts_exdata.294.750425035" datafile
    20 auxiliary format
    "/u01/app/oradata/his/ts_tjjk.295.750425037" datafile
    21 auxiliary format
    "/u01/app/oradata/his/ts_shuhao.594.782919537" datafile
    22 auxiliary format
    "/u01/app/oradata/his/ts_patrol.297.750425037" ;
    sql 'alter system archive log current';
    executing Memory Script
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    renamed tempfile 1 to /u01/app/oradata/his/temp.266.750421813 in control file
    renamed tempfile 2 to /u01/app/oradata/his/ts_temp_patrol.298.750425277 in control file
    renamed tempfile 3 to /u01/app/oradata/his/ts_his_temp.296.750427905 in control file
    renamed tempfile 4 to /u01/app/oradata/his/ts_tjjk_temp.282.750427917 in control file
    renamed tempfile 5 to /u01/app/oradata/his/ts_temp_shuhao.595.782919539 in control file
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    Starting backup at 30-AUG-12
    using channel ORA_DISK_1
    using channel ORA_DISK_2
    using channel ORA_DISK_3
    using channel ORA_DISK_4
    channel ORA_DISK_1: starting datafile copy
    input datafile file number=00008 name=+DATA/his/datafile/ts_bj.283.750425027
    channel ORA_DISK_2: starting datafile copy
    input datafile file number=00009 name=+DATA/his/datafile/ts_gt.284.750425027
    channel ORA_DISK_3: starting datafile copy
    input datafile file number=00005 name=+DATA/his/datafile/ts_his.280.750425023
    channel ORA_DISK_4: starting datafile copy
    input datafile file number=00015 name=+DATA/his/datafile/ts_zj.290.750425033
    RMAN-03009: failure of backup command on ORA_DISK_3 channel at 08/30/2012 16:10:23
    ORA-19558: error de-allocating device
    ORA-19557: device error, device type: DISK, device name:
    ORA-17627: ORA-01041: internal error. hostdef extension doesn't exist
    ORA-17627: ORA-01041: internal error. hostdef extension doesn't exist
    ORA-03135: connection lost contact
    channel ORA_DISK_3 disabled, job failed on it will be run on another channel
    RMAN-03009: failure of backup command on ORA_DISK_4 channel at 08/30/2012 16:42:19
    ORA-19558: error de-allocating device
    ORA-19557: device error, device type: DISK, device name:
    ORA-17627: ORA-01041: internal error. hostdef extension doesn't exist
    ORA-17627: ORA-01041: internal error. hostdef extension doesn't exist
    ORA-03135: connection lost contact
    channel ORA_DISK_4 disabled, job failed on it will be run on another channel
    RMAN-03009: failure of backup command on ORA_DISK_2 channel at 08/30/2012 16:51:58
    ORA-19558: error de-allocating device
    ORA-19557: device error, device type: DISK, device name:
    ORA-17627: ORA-01041: internal error. hostdef extension doesn't exist
    ORA-17627: ORA-01041: internal error. hostdef extension doesn't exist
    ORA-03135: connection lost contact
    channel ORA_DISK_2 disabled, job failed on it will be run on another channel
    RMAN-03009: failure of backup command on ORA_DISK_1 channel at 08/30/2012 17:49:09
    ORA-19558: error de-allocating device
    ORA-19557: device error, device type: DISK, device name:
    ORA-17627: ORA-01041: internal error. hostdef extension doesn't exist
    ORA-17627: ORA-01041: internal error. hostdef extension doesn't exist
    ORA-03135: connection lost contact
    channel ORA_DISK_1 disabled, job failed on it will be run on another channel
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of Duplicate Db command at 08/30/2012 17:49:09
    RMAN-03015: error occurred in stored script Memory Script
    RMAN-03009: failure of backup command on ORA_DISK_4 channel at 08/30/2012 16:42:19
    ORA-19558: error de-allocating device
    ORA-19557: device error, device type: DISK, device name:
    ORA-17627: ORA-01041: internal error. hostdef extension doesn't exist
    ORA-17627: ORA-01041: internal error. hostdef extension doesn't exist
    ORA-03135: connection lost contact
    RMAN-03009: failure of backup command on ORA_DISK_2 channel at 08/30/2012 16:51:58
    ORA-19558: error de-allocating device
    ORA-19557: device error, device type: DISK, device name:
    ORA-17627: ORA-01041: internal error. hostdef extension doesn't exist
    ORA-17627: ORA-01041: internal error. hostdef extension doesn't exist
    ORA-03135: connection lost contact
    RMAN-03009: failure of backup command on ORA_DISK_1 channel at 08/30/2012 17:49:09
    ORA-19558: error de-allocating device
    ORA-19557: device error, device type: DISK, device name:
    ORA-17627: ORA-01041: internal error. hostdef extension doesn't exist
    ORA-17627: ORA-01041: internal error. hostdef extension doesn't exist
    ORA-03135: connection lost contact
    RMAN-03009: failure of backup command on ORA_DISK_3 channel at 08/30/2012 16:10:23
    ORA-19558: error de-allocating device
    ORA-19557: device error, device type: DISK, device name:
    ORA-17627: ORA-01041: internal error. hostdef extension doesn't exist
    ORA-17627: ORA-01041: internal error. hostdef extension doesn't exist
    ORA-03135: connection lost contact
    RMAN>
    Primary database alert log:
    Thu Aug 30 15:41:00 2012
    Clearing standby activation ID 3277937203 (0xc3615a33)
    The primary database controlfile was created using the
    'MAXLOGFILES 16' clause.
    There is space for up to 11 standby redo logfiles
    Use the following SQL commands on the standby database to create
    standby redo logfiles that match the primary database:
    ALTER DATABASE ADD STANDBY LOGFILE 'srl1.f' SIZE 536870912;
    ALTER DATABASE ADD STANDBY LOGFILE 'srl2.f' SIZE 536870912;
    ALTER DATABASE ADD STANDBY LOGFILE 'srl3.f' SIZE 536870912;
    ALTER DATABASE ADD STANDBY LOGFILE 'srl4.f' SIZE 536870912;
    ALTER DATABASE ADD STANDBY LOGFILE 'srl5.f' SIZE 536870912;
    ALTER DATABASE ADD STANDBY LOGFILE 'srl6.f' SIZE 536870912;
    WARNING: OMF is enabled on this database. Creating a physical
    standby controlfile, when OMF is enabled on the primary
    database, requires manual RMAN intervention to resolve OMF
    datafile pathnames.
    NOTE: Please refer to the RMAN documentation for procedures
    describing how to manually resolve OMF datafile pathnames.
    Thu Aug 30 16:10:13 2012
    Errors in file /u01/oracle/diag/rdbms/his_primary/his/trace/his_ora_25860.trc (incident=72361):
    ORA-00600: internal error code, arguments: [1868], [0xFFFFFFFF7BBD4988], [], [], [], [], [], [], [], [], [], []
    Incident details in: /u01/oracle/diag/rdbms/his_primary/his/incident/incdir_72361/his_ora_25860_i72361.trc
    Thu Aug 30 16:10:20 2012
    Trace dumping is performing id=[cdmp_20120830161020]
    Thu Aug 30 16:10:22 2012
    Sweep [inc][72361]: completed
    Sweep [inc2][72361]: completed
    Thu Aug 30 16:40:32 2012
    Thread 1 cannot allocate new log, sequence 3031
    Private strand flush not complete
    Current log# 4 seq# 3030 mem# 0: +DATA/his_primary/onlinelog/group_4.579.759345057
    Current log# 4 seq# 3030 mem# 1: /backup/odsdb/HIS_PRIMARY/onlinelog/o1_mf_4_74nf15rq_.log
    Thread 1 advanced to log sequence 3031 (LGWR switch)
    Current log# 5 seq# 3031 mem# 0: +DATA/his_primary/onlinelog/group_5.261.759345075
    Current log# 5 seq# 3031 mem# 1: /backup/odsdb/HIS_PRIMARY/onlinelog/o1_mf_5_74nf1q2g_.log
    Thu Aug 30 16:40:37 2012
    LNS: Standby redo logfile selected for thread 1 sequence 3031 for destination LOG_ARCHIVE_DEST_2
    Thu Aug 30 16:40:39 2012
    Archived Log entry 5829 added for thread 1 sequence 3030 ID 0xffffffffc3615a33 dest 1:
    Thu Aug 30 16:42:15 2012
    Errors in file /u01/oracle/diag/rdbms/his_primary/his/trace/his_ora_25862.trc (incident=72369):
    ORA-00600: internal error code, arguments: [1868], [0xFFFFFFFF7BBD4988], [], [], [], [], [], [], [], [], [], []
    Incident details in: /u01/oracle/diag/rdbms/his_primary/his/incident/incdir_72369/his_ora_25862_i72369.trc
    Thu Aug 30 16:42:17 2012
    Trace dumping is performing id=[cdmp_20120830164217]
    Thu Aug 30 16:42:17 2012
    Sweep [inc][72369]: completed
    Sweep [inc2][72369]: completed
    Thu Aug 30 16:51:53 2012
    Errors in file /u01/oracle/diag/rdbms/his_primary/his/trace/his_ora_25858.trc (incident=72353):
    ORA-00600: internal error code, arguments: [1868], [0xFFFFFFFF7BBD4988], [], [], [], [], [], [], [], [], [], []
    Incident details in: /u01/oracle/diag/rdbms/his_primary/his/incident/incdir_72353/his_ora_25858_i72353.trc
    Thu Aug 30 16:51:55 2012
    Sweep [inc][72353]: completed
    Sweep [inc2][72353]: completed
    Thu Aug 30 16:51:55 2012
    Trace dumping is performing id=[cdmp_20120830165155]
    Edited by: 960892 on 2012-9-24 上午2:22

    hi:
    this is the initialization parameter file for auxiliary instance:
    *.audit_file_dest='/u01/oracle/admin/his/adump'
    *.audit_trail='db'
    *.compatible='11.2.0.0.0'
    *.control_files='/u01/app/oradata/his/control01.ctl','/u01/app/oradata/his/control02.ctl','/u01/app/oradata/his/control03.ctl'
    *.db_block_size=8192
    *.db_domain='abc.com.cn'
    *.db_file_name_convert='+DATA/his/datafile/','/u01/app/oradata/his/','+DATA/his/tempfile/','/u01/app/oradata/his/','+DATA/his_primary/datafile/','/u01/app/oradata/his/','+DATA/his_primary/tempfile/','/u01/app/oradata/his/'
    *.db_files=1000
    *.db_name='his'
    *.db_recovery_file_dest='/backup/oracle'
    *.db_recovery_file_dest_size=1073741824000
    *.db_unique_name='his_standby_tt'
    *.diagnostic_dest='/u01/oracle'
    *.dispatchers='(PROTOCOL=TCP) (SERVICE=hisXDB)'
    *.fal_client='his_standby_tt'
    *.fal_server='his_primary'
    *.log_archive_config='DG_CONFIG=(his_primary,his_standby_tt)'
    *.log_archive_dest_1='LOCATION=/backup/oracle/HIS_STANDBY_TT/archivelog VALID_FOR=(ALL_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=his_standby_tt'
    *.log_archive_dest_2='SERVICE=his_primary LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=his_primary'
    *.log_archive_dest_state_1='enable'
    *.log_archive_dest_state_2='enable'
    *.log_file_name_convert='+DATA/his_primary/onlinelog/','/u01/app/oradata/his/','/backup/odsdb/HIS_PRIMARY/onlinelog/','/u01/app/oradata/his/'
    *.memory_target=2181038080
    *.nls_language='SIMPLIFIED CHINESE'
    *.nls_territory='CHINA'
    *.open_cursors=300
    *.processes=3000
    *.remote_login_passwordfile='EXCLUSIVE'
    *.service_names='his.abc.com.cn,his_standby_tt.abc.com.cn'
    *.sessions=3305
    *.standby_file_management='AUTO'
    *.undo_tablespace='UNDOTBS1'
    *.event='10298 trace name context forever, level 32'

  • Issue with RMAN DUPLICATE FROM ACTIVE DATABASE....

    Hi All,
    Not sure if I should continue from a closed thread, so apologies, opening a new one..
    I ran the following command:
    DUPLICATE TARGET DATABASE TO ' AUX1"
    from ACTIVE DATABASE
    NOFILENAMECHECK:
    So the copy went in fine...so I am confiused now....why when doing a recover, i get the below errors from output:
    archived log for thread 1 with sequence 68346 is already on disk as file H:\ORAC
    LE_ARCHIVE_LOGS\RBS1\ARCHIVELOG\2013_12_08\O1_MF_1_68346_ARCH_D-RBS_ID-295728924
    5_S-68346_T-1_A-780292253_C1OQVOSU_.ARC
    archived log for thread 1 with sequence 68347 is already on disk as file H:\ORAC
    LE_ARCHIVE_LOGS\RBS1\ARCHIVELOG\2013_12_08\O1_MF_1_68347_ARCH_D-RBS_ID-295728924
    5_S-68347_T-1_A-780292253_C3OQVOU1_.ARC
    archived log for thread 1 with sequence 68348 is already on disk as file H:\ORAC
    LE_ARCHIVE_LOGS\RBS1\ARCHIVELOG\2013_12_08\O1_MF_1_68348_ARCH_D-RBS_ID-295728924
    5_S-68348_T-1_A-780292253_C4OQVOU6_.ARC
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of Duplicate Db command at 12/08/2013 07:36:04
    RMAN-03015: error occurred in stored script Memory Script
    RMAN-06053: unable to perform media recovery because of missing log
    RMAN-06025: no backup of archived log for thread 1 with sequence 64713 and start
    ing SCN of 12728145997 found to restore
    RMAN-06025: no backup of archived log for thread 1 with sequence 64712 and start
    ing SCN of 12728133322 found to restore
    RMAN-06025: no backup of archived log for thread 1 with sequence 64711 and start
    ing SCN of 12728121403 found to restore
    RMAN-06025: no backup of archived log for thread 1 with sequence 64709 and start
    ing SCN of 12727730726 found to restore
    RMAN-06025: no backup of archived log for thread 1 with sequence 64708 and start
    ing SCN of 12727717143 found to restore
    RMAN-06025: no backup of archived log for thread 1 with sequence 64707 and start
    ing SCN of 12727701799 found to restore
    RMAN-06025: no backup of archived log for thread 1 with sequence 64704 and start
    ing SCN of 12726617917 found to restore
    RMAN-06025: no backup of archived log for thread 1 with sequence 64703 and start
    ing SCN of 12726605080 found to restore
    RMAN-06025: no backup of archived log for thread 1 with sequence 64702 and start
    No archivelogs were purged or backed up and the current logs were retained....so im somewhat confused....i am not restoring from backup but running active duplicate...
    should I re-run the command with:
    SET UNTIL SEQUENCE 64713 THREAD 1

    This fails saying that "ORA-12528: TNS:listener: all appropriate instances are blocking new connections" which is quite normal given that the listener is havig a handle in BLOCKED state for this AUXDB as it is in NOMOUNT state.
    Could you please help me on how to proceed?
    One option can be to create the controlfile manually and mount the instance before doing the duplicate. I hope Rman can continue from there.
    Another option is to go for backup based duplicate.
    Is there any other way to go?
    Provide static registration on AUXILIARY side for your auxiliary instance and try again.For example change listener.ora file as
    SID_LIST_LISTENER =
      (SID_LIST =
        (SID_DESC =
          (GLOBAL_DBNAME = AUXDB)
          (ORACLE_HOME = <your oracle home>)
          (SID_NAME = AUXDB)
    LISTENER =
      (DESCRIPTION =
        (ADDRESS = (PROTOCOL = TCP)(HOST = <auxiliary host/ip>)(PORT = 1521))
      )And restart listener on auxiliary host then try again

  • RMAN duplicate from ACTIVE DATABASE

    Hi,
    I am trying to create a new 11.2.0.1 database by duplicating an existing 11.2.0.1 database using Rman with 'from active database' option.
    I have created a password file and listener is configured as well.
    The aux database is started in nomount state.
    rman
    connect target sys/[email protected]
    connect auxiliary sys/[email protected]
    duplicate target database to AUXDB
    FROM ACTIVE DATABASE;
    This fails saying that "ORA-12528: TNS:listener: all appropriate instances are blocking new connections" which is quite normal given that the listener is havig a handle in BLOCKED state for this AUXDB as it is in NOMOUNT state.
    Could you please help me on how to proceed?
    One option can be to create the controlfile manually and mount the instance before doing the duplicate. I hope Rman can continue from there.
    Another option is to go for backup based duplicate.
    Is there any other way to go?
    Regards,
    Aravind

    This fails saying that "ORA-12528: TNS:listener: all appropriate instances are blocking new connections" which is quite normal given that the listener is havig a handle in BLOCKED state for this AUXDB as it is in NOMOUNT state.
    Could you please help me on how to proceed?
    One option can be to create the controlfile manually and mount the instance before doing the duplicate. I hope Rman can continue from there.
    Another option is to go for backup based duplicate.
    Is there any other way to go?
    Provide static registration on AUXILIARY side for your auxiliary instance and try again.For example change listener.ora file as
    SID_LIST_LISTENER =
      (SID_LIST =
        (SID_DESC =
          (GLOBAL_DBNAME = AUXDB)
          (ORACLE_HOME = <your oracle home>)
          (SID_NAME = AUXDB)
    LISTENER =
      (DESCRIPTION =
        (ADDRESS = (PROTOCOL = TCP)(HOST = <auxiliary host/ip>)(PORT = 1521))
      )And restart listener on auxiliary host then try again

Maybe you are looking for

  • Memory_target and memory usage reported by windows taskmanager

    Hi, shouldn't Oracle 11g limit the amount of used memory (reported by windows taskmanager for process oracle.exe) to the value of "memory_target" (which means using automatic memory management)? My database running on Windows 2003 R2 32bit (RAC) is c

  • Extreme Base Station suddenly dropping internet connection

    I have an Extreme Base Station (802.11n Fast Ethernet) which has been providing wireless internet and printing to two imacs pretty flawlessly for several years. It seems to be a fairly simple network. DSL modem (to WAN port) and USB printer cable plu

  • Thumbnails in Bridge don't show adjustments made to image

    I have Photoshop CS4 on a Macbook Pro, OS 10.6.7. After I open a raw image (DNG & PEF) in Bridge and make adjustments, such as cropping or adjusting exposure, the changes do not show in Bridge thumbnails after I close the image.  It thumbnails work f

  • Packaging data is not saved in document draft (missing functionality)

    Dear all, Packaging data, usually typed with delivery note, is not saved together with Delivery Note draft (No matter the draft is saved manually or automatically by approval procedure). I have tested on SBO 2005B latest patch, 2007B latest patch, an

  • RAC Differences for Standard and Enterprise Editions of 10g

    Are there any differences between RAC implementations for Oracle 10g SE and RAC option for Oracle 10g Enterprise Edition (except CPU numbers limitations and CRS&ASM necessity)? I heard some buzz what RAC for SE have only HA abilities.