Fails to resume after pm-suspend after changing graphics card.

Hello, i earlir had an ATI card, but it broke a few days ago. I got my hands on a very cheap second-hand nvidia card, and put it in my machine. After installing the correct driver, everything worked smooth until i tried to wake my computer from suspend. The screen is black and i can hear system beeps when pressing buttons causing system beeps, and can reboot with the help of my magical sysrq key.
The card is a Geforce FX 5950 and i fail to find a single complain about suspend not working with it.

This is my pm-suspend log after a failed awakening.
Initial commandline parameters:
Thu Aug 27 19:35:47 CEST 2009: Running hooks for suspend.
/usr/lib/pm-utils/sleep.d/00auto-quirk suspend suspend: Adding quirks from HAL: --quirk-dpms-on --quirk-dpms-suspend --quirk-vbe-post --quirk-vbemode-restore --quirk-vbestate-restore --quirk-vga-mode-3
success.
/usr/lib/pm-utils/sleep.d/00logging suspend suspend: Linux tukumon 2.6.30-ARCH #1 SMP PREEMPT Mon Aug 17 18:04:53 CEST 2009 i686 Intel(R) Pentium(R) 4 CPU 2.66GHz GenuineIntel GNU/Linux
Module Size Used by
ipv6 277908 14
ext2 69036 2
jfs 180492 1
xfs 578752 1
exportfs 4260 1 xfs
snd_seq_dummy 2696 0
snd_seq_oss 31168 0
snd_seq_midi_event 7012 1 snd_seq_oss
snd_seq 53744 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device 6768 3 snd_seq_dummy,snd_seq_oss,snd_seq
snd_pcm_oss 40352 0
snd_mixer_oss 17540 1 snd_pcm_oss
snd_intel8x0 30592 1
snd_ac97_codec 106088 1 snd_intel8x0
usbhid 40608 0
fan 4392 0
ac97_bus 1540 1 snd_ac97_codec
hid 42496 1 usbhid
snd_pcm 73672 3 snd_pcm_oss,snd_intel8x0,snd_ac97_codec
snd_timer 21100 2 snd_seq,snd_pcm
snd 58436 11 snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer
i2c_i801 9656 0
nvidia 7095560 24
ppdev 7656 0
battery 10984 0
uhci_hcd 23540 0
psmouse 59644 0
dcdbas 7876 0
e100 33420 0
mii 4804 1 e100
lp 9700 0
parport_pc 36964 1
parport 34380 3 ppdev,lp,parport_pc
iTCO_wdt 10952 0
iTCO_vendor_support 3080 1 iTCO_wdt
ac 4360 0
evdev 10176 10
sg 27928 0
soundcore 6848 1 snd
snd_page_alloc 8876 2 snd_intel8x0,snd_pcm
thermal 13888 0
processor 35800 0
button 5556 0
ehci_hcd 35664 0
i2c_core 22776 2 i2c_i801,nvidia
usbcore 150192 4 usbhid,uhci_hcd,ehci_hcd
serio_raw 5704 0
pcspkr 2372 0
intel_agp 27484 1
agpgart 32756 2 nvidia,intel_agp
shpchp 34328 0
pci_hotplug 28964 1 shpchp
rtc_cmos 11212 0
rtc_core 18048 1 rtc_cmos
rtc_lib 2500 1 rtc_core
ext4 237988 1
mbcache 7080 2 ext2,ext4
jbd2 57756 1 ext4
crc16 1636 1 ext4
dm_mod 60836 12
sd_mod 27328 4
ata_piix 23080 3
pata_acpi 4228 0
ata_generic 4680 0
libata 168012 3 ata_piix,pata_acpi,ata_generic
floppy 55780 0
scsi_mod 110708 3 sg,sd_mod,libata
total used free shared buffers cached
Mem: 3374324 236056 3138268 0 27856 116256
-/+ buffers/cache: 91944 3282380
Swap: 524280 0 524280
success.
/usr/lib/pm-utils/sleep.d/00powersave suspend suspend: success.
/usr/lib/pm-utils/sleep.d/01grub suspend suspend: not applicable.
/usr/lib/pm-utils/sleep.d/11netcfg suspend suspend: success.
/usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend: not applicable.
/usr/lib/pm-utils/sleep.d/55NetworkManager suspend suspend: success.
/usr/lib/pm-utils/sleep.d/75modules suspend suspend: not applicable.
/usr/lib/pm-utils/sleep.d/90clock suspend suspend: not applicable.
/usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend: success.
/usr/lib/pm-utils/sleep.d/95led suspend suspend: not applicable.
/usr/lib/pm-utils/sleep.d/98smart-kernel-video suspend suspend: success.
/usr/lib/pm-utils/sleep.d/99video suspend suspend: kernel.acpi_video_flags = 0
success.
Thu Aug 27 19:35:47 CEST 2009: performing suspend
Thu Aug 27 19:36:00 CEST 2009: Awake.
Thu Aug 27 19:36:00 CEST 2009: Running hooks for resume
/usr/lib/pm-utils/sleep.d/99video resume suspend: success.
/usr/lib/pm-utils/sleep.d/98smart-kernel-video resume suspend: success.
/usr/lib/pm-utils/sleep.d/95led resume suspend: not applicable.
/usr/lib/pm-utils/sleep.d/94cpufreq resume suspend: success.
/usr/lib/pm-utils/sleep.d/90clock resume suspend: not applicable.
/usr/lib/pm-utils/sleep.d/75modules resume suspend: success.
/usr/lib/pm-utils/sleep.d/55NetworkManager resume suspend: success.
/usr/lib/pm-utils/sleep.d/49bluetooth resume suspend: not applicable.
/usr/lib/pm-utils/sleep.d/11netcfg resume suspend: success.
/usr/lib/pm-utils/sleep.d/01grub resume suspend: not applicable.
/usr/lib/pm-utils/sleep.d/00powersave resume suspend: success.
/usr/lib/pm-utils/sleep.d/00logging resume suspend: success.
/usr/lib/pm-utils/sleep.d/00auto-quirk resume suspend: success.
Thu Aug 27 19:36:01 CEST 2009: Finished.

Similar Messages

LR screwed up after changing graphics card?

After successfully working with LR since version 4 over a long period with thousands of photos I now have a strange problem which I can´t find a solution for on my own.
What´s wrong?
-LR doesn´t show any images, neither thumbnails in import mode nor full images or thumbnails in development view
-There is only a grey area where the photo should be.
-Old photos or newly imported pics all have the same problem.
-switching between files causes loading progress with plausible duration, but the image does not appear
-Histogramm, Metadata etc. are shown correctly, but no image nowhere
-Photoshop/Camera RAW on the same computer with the very same files work without any problem
What did I try to fix it?
-renamed the catalog file and created a new one. No luck. Same effect while importing and after that in the development view only grey again...
-renamed the previews, no luck
-renamed the agprefs file to start with fresh settings which seemed to work because I had to set the user language and so on. But - no impact on the problem.
-searched the faq and several boards, discussions, Google. No answer. Only one user with the same problem, he also got no answer...
What I may have done to get into that kind of trouble:
-I changed my graphics card some time ago. I had a NVIDIA 9800 GT before and changed it to a NVIDIA 640GT.
-I took every OS update, NVIDIA driver update and Adobe CC/LR Update and did not use LR after a couple of such changes.
Some facts about my system:
-Win8, Core i7 920, 6GB RAM, SSD/HD with enough space
-LR 5.3 latest update
Please help. Thanks in advance.

I would first suspect the video driver. Video drivers can cause weird problems, sometimes affecting only one program.
Things I would do, many of which you may well already have done:
First off, set a system restore point, so you can recover what you do.
Check the video driver, and make sure it's the right one.
Try earlier versions of the driver. The NVIDIA 640GT is not new, and may work better on older drivers. My GTX 550 doesn't like the current drivers, and is significantly faster with earlier ones. You can also go into Device Manager and roll back the driver to previous versions. I don't update video drivers unless there's a reason: to fix a problem, say. New NVIDIA drivers are usually only to support new hardware.
Try removing the driver (in Device Manager, use Uninstall for the video card). That makes Windows default to a basic VGA driver, and then get Windows to update the driver (in device manager, update driver). That will get what Microsoft reckon is the latest driver, which is not generally what NVIDIA think is latest, but may be more stable.
If you've still got the old card, try that (just to check whether it is a video card issue).
Uninstall and reinstall LR.
I know that's the obvious stuff, which you've probably done.
PS - as ssprengel says, check the monitor profile. Definitely the first thing to do!

After changing graphic card quicktime lags

just bought geforce 630 2GB and quicktime starts lagging on apple trailers website.
had geforce 9500 before and with no problems.
using pc and have the latest version of quicktime and graphic card drivers.

Hello amittwina, I've worked with display adapters extensively and your problem is unusual to have one cause a lag on the internet, not that it's not possible, my first thought was the computer didn't have the horsepower or a dust build up causing overheating. A few things I would try.
Try using a differnet browser perhaps Firefox.
Hardware/Graphics acceleration: Open the Display control panel>Settings tab>Advanced button>Troubleshoot button>and adjust the Hardware acceleration maybe to Full.
Open the QuickTime control panel: Click on the Advanced tab and try selecting>Safe mode (GDI only)
I doubt it's a problem with QuickTime website and the card. If it is the wrong driver for the card a windows computer will just keep restarting on its' own. Another thought could be BIOS related?
Perhaps you've already resolved do post back I would be curious on the outcome.

MacBook Pro won't start after changing RAM cards; just beeps.

MacBook Pro will not start after changing RAM cards. It just beeps; then I force it to quit.

The three things that come to mind immediately are that the RAM card isn't seated properly (you should hear or feel a click when it is seated), the RAM is bad or marginal for that Mac model, or you didn't get the correct RAM type.

Why can I not log into The app store after changing credit card information?

Why can I not log into the App store after changing credit card information?

DNS -
Some folks resolve download and other connection issues by using either OpenDNS or Google Public DNS services. The best use is to use it as the DNS configuration in your modem/router/gateway device, but often the configuration in the computer or iOS device will over ride the other configuration if you don't have access.
Open DNS;
http://www.opendns.com
208.67.222.222, 208.67.220.220
Google Public DNS;
https://developers.google.com/speed/public-dns/
8.8.8.8, 8.8.4.4

Itunes was deleted from laptop after changing credit card info and password. How do I get it back along with all songs that was on my account

itunes was deleted from laptop after changing credt card infor and password. How do I get it back along with all of its contents?

I suspect unless he had some items in iCloud backup then they are gone. Connecting an iPhone to a different library from that to which it was previously connected will result in the device asking if you want to erase it.

Changing Graphics Card Settings

Hi there
I have a 24 inch iMac and when I run Maya (the 3d software) the timeline does not show up at the bottom of the screen.
It works fine on my old G4 so what is the problem here?
I figure I need to change graphics card options somewhere but have no idea where to find them.
Please help!
THANKS

I use maya alot, the timeline will be nothing to do with your graphics, if it was the nothing would show up, just hold space to bring up your hotbox go to display / UI elements and make sure time slider is ticked on, if all else fails just trash your prefences and relaunch maya, im going to presume your not a professional maya user? just assuming since your using a iMac for it which isn't the best chose, also what version of maya do you have? learning edition, 7, 8 or older?

Changed graphics cards, now doesn't detect monitors

*I changed graphics cards on a Mac Pro and now its not detecting the monitors despite booting OSX10.5!*
Mac Pro
2 Monitors
Replacing radeon card with a geforce 7300gt
Unplugged everything
replaced card
Plugged everything back in, power last.
Powered on
Monitors are blank (cannot detect signal, autocycling between analog/dvi searching for one)
I've tried plugging just one monitor in and just a mouse/keyboard.
I've tried reseating the card.
I've tried plugging the card into 16x slot #2.
*Whats so infuriating about this is the computer actual BOOTS!* The keyboard dvd eject button responds, and I can explore the contents of this Mac Pros hard drive through the local network.
Any ideas?
What am I doing wrong! ><

What is the video card you are installing? Is this an ATI 3870? If so did you read the installation instructions before installing? You were to install the software drivers before installing the card.
Also check that you got the Mac version of this card.
Message was edited by: Kappy

Task sequence fails to resume after first reboot - Post Installation Task Sequence

Hi everyone,
I am unable to deploy a Post Installation Task Sequence whenever I add an application to the "custom tasks" folder in the task sequence. If I create a blank Post Installation Task Sequence w/o making any changes, it deploys fine and gives
me a summary page w/ no errors. Just to be clear, Litetouch runs fine when I kick off "cscript litetouch.vbs" from an elevated cmd prompt when logged in as administrator, but after reboot it boots to windows and does nothing.
I know it's not deploying because it's leaving around a mapped drive to the share, a SMSTaskSequence folder and MININT folder on the target machine. My understanding is that those are supposed to get cleaned up by LTIcleanup.wsf at the end of the
task sequence.
The BDD.log doesn't seem to be of much use. The last line of the log says "sms task sequencer already found on c:\minint\tools\x64" and then it does nothing.
FWIW, I'm able to deploy using the standard task sequence and also able to sysprep and capture. The application that I am trying to install is just a batch file that adds the reg key to hide the start menu, then reboot. I am not rebooting in the script,
I'm telling the application to do the reboot in MDT.
I know to a certainty that the target machine (a VM) has been sysprepped and am able to establish a connection to the deployment share so I'm kind of at a loss. Also looked over Keith's FAQ on the subject and couldn't find any similarities to my issue.
Any help is appreciated. I can provide logs if necessary. Thanks!

Well, I created a fresh deploymentshare on a fresh windows server 2012 VM and am still having the same problem. If I create a blank Post OS Installation Task and make no changes, it deploys fine to the target vm (win8.1). If I have an app (chrome)
that I have set to reboot after installation, it always (tested this 30+times) fails to resume the task sequence. I get no final confirmation page and a big mess that I clean up with LTIcleanup.wsf.
The deployment share has full (everyone) permissions to the share and I have full perms set to domain admin group for ntfs. It seems like something goes wrong with the reboot cycle, but autologin seems to work fine with the admin pw so I'm really confused.
Like I said, the bdd.log in c:\windows\temp\deploymentshare doesn't have any errors. I've tested this both on joined and unjoined (workgroup) machines and it makes no difference.
I should note that I can deploy Chrome and other apps sequentially as long as reboots are not involved. So far, I've only had this problem if the reboot occurs with the first application. Haven't yet tested on reboots w/ other apps in the sequence.
FWIW, this is starting to look like this:
https://social.technet.microsoft.com/Forums/en-US/2db5f184-8332-4f63-b1ad-385a6d893f8c/mdt-2013-windows-81-application-install-with-reboot-problem?forum=mdt
Can someone tell me why this might be happening? Is this a bug with this task sequence? Would someone mind testing this to see if there's just something wrong in my environment?
I'd appreciate it. Thanks.

[Solved] Problems after upgrading graphics card

I just upgraded my 8800GTX to a GTX650. I ran "nvidia-xconfig" initially then "nvidia-settings" to make sure both of my monitors looked good. After rebooting I have Openbox running on only my "main" screen. I can move my mouse to the second screen, but when I do the cursor changes to the default X one and I can't do anything there. I also can't drag windows to my secondary screen.
I figure it is something to do with twinview not working properly, or some other xorg.conf configuration problem. Here is a link to my xorg.conf: http://pastie.org/private/zo9fikanxumf4haqaya2eg
Any help would be great.
EDIT: Solved. In nvidia-settings I needed to set both displays to the same X screen
Last edited by Dethredic (2013-09-04 23:21:10)

Quote from: blazing storm on 04-August-05, 17:54:18
In your motherboard manual it describes how to re-set the CMOS. Taking out the battery would work but it's easier to re-set the CMOS via the jumper pins. It also holds info on bios features and settings in the manual so you might want to scan through that and see if there's anything you might change.
Have you tried the graphics card in another computer? Do you get the same problems?
Ok - I now found out which jumpers to change - thank you.
I have tried putting my old graphics card back in but still had the problem.
On Sunday someone is going to switch ram chips (his are good in his machine) with me and hopefully we'll establish whether or not my physical ram modules are ok.
Seem very strange to me that both of my modules (one was ok a month ago and the other just arrived from Crucial) fail the same test - memtest #7 - random memory but then I'm only an egg when it comes to this stuff.
Many thanks for everyone's help !
Mike
Well I don't know if it's good news or bad news !?
Have just tested my system with a known to be good ram module and ?
My machine failed Memtest #7 - the machine that the 'borrowed' ram came from passes the test.
So I will reset the bios I guess.
Mike

Display Problems After Installing Graphics Card Drivers

Hi, I was wondering if anyone can help with a problem that's got me stumped?
I've just upgraded my pc (CPU, Motherboard, Memory, Hard Drive, Sound Card, Monitor) - the only things that haven't changed are my graphics card and PSU.
I've built the system, installed windows and the motherboard drivers, which all work correctly. But after I install the graphics card drivers and reboot, the display becomes all scrambled when it loads into windows. The display is fine with the initial boot and up until the Windows XP screen, with the moving bar comes up.
The graphics card was fine in my previous system and I have tried my old monitor, but neither works. I've updated the BIOS, using the MSI Live Update program and have also tried various versions of the nVidia drivers (including the latest).
Any help would be appreciated.
Thanks in advance.
****UPDATE****
I've now managed to install the nVidia drivers and now windows loads normally, but after a short amount of time the screen scrambles again.

I have the same problem. It happened right after I installed the graphics update. When the computer restarted, my screen went crazy. I couldn't see anything, just a screen full of horizontal lines. After restarting a couple of times it seemed to go away, but it has begun to happen again recently. although not as bad yet. I am not saying it's not a logic board issue, but it does seem funny that more than one person is experiencing the same type of problem after the graphics update. I guess it's time to take a trip to the apple store.

MacBook Pro will not boot after switching graphics cards

Dear All,
I have a late-2008 unibody MacBook Pro. I have had it since April 2009, and I have not encountered any real problems with it.
Yesterday, I switched to the 9600 graphics card for the first time since purchasing the machine. It logged me out as expected, but then proceeded to flash a blank blue screen at me for 20 minutes. Assuming that this was not normal, I powered down the computer by holding the power button. I powered it on again, and it will not get past the Apple symbol screen with the loading whirligig. I left it on for seven hours (overnight), and no change.
I booted it from the install disc and ran the Disk Utility verify and repair. It either gives me no problem or a block count error, which goes away when I run repair. I tried running verify on permissions, but this gives me a "failed to exit" or some such error, same with repair permissions. Restarting gives me the same apple logo screen until forever.
I've tried resetting PRAM, doing the battery removal and holding power button for 5 seconds, I've tried booting in safe mode (it won't), and doing an archive and install (which it can't do either, as it can't access my HDD or something). I've run the disk utility verify and repair several times.
I unfortunately don't have a recent backup (slapping myself), so I'm open to suggestions before going into despair over my $2600 paperweight before doing an erase and install...
Thanks in advance!
PS: is there a way to open the computer in target disk mode via the install cd so that I CAN back it up?
Message was edited by: Kaklz

Thanks, Joe. That may be an option if all else fails. I don't currently own an enclosure, so I am looking for an alternative before spending any money (I know, "frugal Apple user" is unheard of, but...).
I do have an old G3 tower, which I am using in the meantime, so if I can use this to open my MBP in target disk mode (or some other way of making a backup), I'd be overjoyed!

6 beeps on startup after replacing graphic card H8-1409

Hi,
I'm having trouble upgrading the graphic card on the desktop. The power supply comes with the computer is rated 460W and the min requirement for the new graphic card (Asus GTX660 Direct CU II OC) per manufacturer specs is 450W. After I installed the new card (with the additional power cord plugged in), the computer gives me 6 beeps and the screen doesn't show anything. Is it the problem of the power supply? If so would the case be ok to house a different power supply?
Thank you!

Hi I've found a solution in a different thread:
http://h30434.www3.hp.com/t5/Desktop-Hardware/6-Long-BIOS-beeps-after-video-card-install/td-p/239108...
After chaning the BIOS settings I'm able to load windows without any problem thanks for the help regardless!

World of Warcraft crashing my computer after ugrading graphics card to RX2600PRO

After i upgraded my AGP graphics card i cant run WoW anymore. The card is RX2600PRO-T2D256Z/D2, and it crash my computer a few seconds after game is loaded. The windows crash log says HW error. But i don't think it is, since everything else is working find.
So i wonder, can it be something in settings? If so, what? I tried reinstall drivers etc, but still crash. I can run other 3D games without any problems. Also i can overclock the card to max. Still running smooth, so i guess the card is OK.
How can i test my RX2600PRO-T2D256Z/D2 card? Is there a program that test memory, CPU on a graph card?
Looking forward to get some ideas.. to solve or find out whats wrong :P

Tommen,
Try to see if you can get any other cames to crash with that Vid Card in your comp. Also try the Vid Card in another comp to see if the problem follows the Vid Card or stays with the comp.
Take Care,
Richard

Drivers Missing After New Graphics Card ?

Recently the graphics card on our Power Mac G4 "MDD" stopped working. For a while, there was an increased fan noise, then just a few days ago, when the computer was turned on, the fan was very loud & the screen was jittery & pixelated before providing an error message & turning off.
We ended up buying a new (refurbished) graphics card -- the same model as was in the computer to begin with: NVidia GeForce4 Titanium TI4600 128MB DVI/ADC.
Today we installed the new card & everything worked great without any errors, screen issues, etc.
However, now we have issues using both our external HD & the iSight (external Firewire camera). First, the Power Mac was not even detecting the External HD (a Western Digital My Book Studio Edition II - 2TB). We then plugged the external HD into our MacBook Pro & it worked as it did before.
Upon further investigation, it seemed that maybe the drivers & managing programs for the WD external HD were missing from the Power Mac. We downloaded & installed those (including an updated firmware) from the Western Digital site. Now the External HD isn't even turning on.. but that's a separate issue that we believe we need to speak with WD about.
Our iSight camera, however, is also not responding & we can't seem to get it to work. We tried to find the drivers for the camera, but have (so far) only been able to find an update for OS X 10.5+
*SO our question is....* are drivers installed/stored on the graphics card?? Why would these things be missing after only switching out the graphics card?
Any help/advice/info would be much appreciated as we are about to pull our hair out!

Hi everyone!
Thanks so much for the help! It didn't make sense to us as that any drivers would be on the graphics card so the suggestions here make a lot more sense.
Before we boot to the OS X install disc and run Disk utility or Disk Warrior, etc.. is there any thing we need to know regarding files on the computer? Is there anything we should or shouldn't do so that we don't need to worry about any possible files being deleted from this procedure?
*A bit more info:* (If this helps) upon further investigation & reading online, we found that somehow the BaseSystem.pkg file was missing. We had all the symptoms mentioned here: http://support.apple.com/kb/TS2023
And we also tried to follow the recommendations regarding getting the computer to recognize the *iSight external camera* found here: http://discussions.apple.com/thread.jspa?messageID=10084429 However, we had no luck. Everything we go through those steps, a window pops up saying no camera is detected even though it is plugged into the Firewire port. We're hoping that following japanmac's suggestions will correct this as well...?

Fails to resume after pm-suspend after changing graphics card.

Similar Messages

Maybe you are looking for