FAILURE ( 5640 ): FALSE: Verify File: \\SERVER\DeploymentShare\Operating Systems\Image 11-13-2014.wim\image.wim ERROR

Guys,
I need help with this error please. I have a WDS in building 13 and another 1 in building 31; Both servers have MDT 2013. At some point, both deployment shares were linked via MDT but I deleted that few days to solve some deployment share corruption in building
31 WDS.
Presently I have 2 32bit images (my 64bit images work fine) giving me the following MDT error in BUILDING 13 during the image deployment:
FAILURE ( 5640 ): FALSE: Verify File: \\BUILDING 31 SERVER\DeploymentShare\Operating Systems\Image 11-13-2014.wim\image.wim
Litetouch deployment failed, Return Code = -2147467259 0x80004005
Failed to run the action: Install Operating System.
Unknown error (Error:00001608; Source: Unknown)
The Execution of the group (Install) has failed and the execution has been aborted. An action failed....
Please note, BUILDING 13 deployment share is not linked to BUILDING 31 deployment share. I don't understand why this error is pointing to BUILDING 31 deployment share.
\\BUILDING 31 SERVER\DeploymentShare\Operating Systems\Image 11-13-2014.wim\image.wim has been removed. I need the task sequence to point to
\\BUILDING 13 SERVER\DeploymentShare\Operating Systems\Image 11-13-2014.wim. BUILDING 13 deployment Share task sequences are pointing to
\\BUILDING 13 SERVER\DeploymentShare as well as my CustomSettings.ini and Bootstrap.ini
1. I have diskpart and cleaned the disc, no luck.
2. I have checked the Install action for both images task sequences and even verified each action on both tasks and cant find any error.
3. I have re-generated the boot images and retyped
\\BUILDING 13 SERVER\DeploymentShare on its CustomSettings.ini and Bootstrap.ini
4. I am in the process of copying Image 11-13-2014.wim back to
\\BUILDING 31 SERVER\DeploymentShare\Operating Systems BUT again I don't understand why these task sequences are pointing to building 31. If this step doesn't work, I will restore both images from a backup and re-added them to building 13 MDT.
But I don't think these steps are the solution.I am out of ideas here...

I disabled McAfee AV, moved images boot files to a different location, regenerate boot images files in MDT, update deployment share, re-add boot files to WDS & refresh WDS. This works for me.

Similar Messages

[823] [HY000] [Microsoft][ODBC SQL Server Driver][SQL Server]The operating system returned error 1450(Insufficient system resources exist to complete the requested service.) to SQL Server.

Hi,
I am facing an issue while loading fresh data into SQL server database.
we are able to load data into staging area, but while processing stored procedures system face bellow error message :
[823] [HY000] [Microsoft][ODBC SQL Server Driver][SQL Server]The operating system returned error 1450(Insufficient system resources exist to complete the requested service.) to SQL Server during a write at offset 0x00000243bd0000 in file 'E:\SQLDB\DBName.mdf'.
Additional messages in the SQL Server error log and system event log may provide more detail. This is a severe system-level error condition that threatens database integrity and must be corrected immediately. Complete a full database consistency check (DBCC
CHECKDB). This error can be caused by many factors; for more information, see SQL Server Books Online.
we use windows 2008 R2 with SQL server managment studio 2008.
Appreciate your suggestion.
Thanks in advance.
Best Regards,
Manorath
Manorath

Hi Manorath,
Based on my research, this issue can be occurred in the following scenarios:
You are running a DBCC command on a large database. For example, you are running the DBCC CHECKDB statement on the database. At the same time, you run many DML statements on the database.
You create a database snapshot for a large database. At the same time, you are running many DML statements on the database.
In these scenarios, the SQL Server service stops responding. The DBCC CHECK statement is never completed, and you receive the error message repeatedly.
This issue occurs because the sparse file for a database snapshot file has exceeded the file size limitation in NTFS file system. When the operating system error 1450 occurs, SQL Server enters an infinite retry loop.
To fix this issue, please download and install Cumulative update package 1 for SQL Server 2008 Service Pack 1. Besides, because the fixes are cumulative, each new release contains all the hotfixes and all the security fixes that were included with the previous
SQL Server 2008 fix release. We recommend that you consider applying the most recent fix release that contains this hotfix.
Reference:
http://support.microsoft.com/kb/967164
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Anyone know why I got this Terminal Error? [ERROR] CPPathUtils.c:526 The device-file for this operating system, 'osx-12.1.0.xml', was not found.

Here is the full text:
[ERROR] <CPPathUtils.c:526> The device-file for this operating system, 'osx-12.1.0.xml', was not found. An attempt to revert to a previous revision of the OS device-file: 'osx-12.0.0.xml' has been made. Please file a Radar report with Apple, on the 'CoreProfile' component, version 'X'.
Appeared after 10.8.1 Friday update while troubleshooting USB/FW issues w/ Mountain Lion.

OK. To recap:
1. Open Terminal.app
2. Type at cursor:
cd /System/Library/PrivateFrameworks/CoreProfile.framework/Versions/A/Resources/De vices/
3. Press Return
4. Type at cursor:
ls
5. Press Return
6. Type at cursor:
sudo ln -s osx-12.0.0.xml osx-12.1.0.xml
7. Press Return
8. Enter password if asked
9. Done.
Can I then type ls again to verify the change?

Windows deployment services in windows server 2012 : operating system not found

Hello,
In order of learning WDS in Windows Server 2012, I created a simple test environment composed of :
A Domain controler running WS 2K12 and hosting both DHCP and WDS services. (with the option of not listening port 67 checked while installing WDS)
A test computer, with no operating system
I also added a Windows Server 2012 Standard WIM file and added also (located in [DVD]\sources\install.wim), boot file image (located in [DVD]\sources\boot.wim)
But now, when i start the client, it gives the following error:
While i don't find any reliable solution on Internet, Im looking for your help if ever, anyone faced this problem and found a solution for it or not
Thanks in advance!
Lotfi BOUCHERIT

I find it strange that client and server IP are the same. Is there any sort of DHCP relay agent running on your WDS server ?

Cisco Prime Infrastructure 1.x Server requirements & Operating System

Dear Friends
I wish you are in very good health ........ I really very confused regarding LMS and i really needs your help ........ I need to order LMS for one of our customer with 500 devices and reporting cabailities ..... So i chosse base license "R-PI-1.1-K9" and 500 device license "R-PI-1.1-500-K9" and
Compliance Management - 500 Device License "L-PI-1.1-CM-500"
What really confused me that i tried to search server cabalitity for my requirments & Operating system and couldn't find it ...... what i need your help for is the following:
1) What is the server requirments ???
2) What is operating system (windows 2008 or VMWare VMware ESX/ESXi Version 4.1 or 5.0)
3) Is their any deticated applicance from Cisco ??
Please help
Thanks in advance

In addition to the release notes for the 4.2.3 patch noted above, please also see the 4.2 release notes which further direct you:
Server and Client Requirements
For information on server and client requirements for the system and browser, see Chapter 2 of Installing and Migrating to Cisco Prime LAN Management Solution 4.2 at:
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/4.2/install/guide/
install.html
To summarize the options it describes, you can run the LMS product on any number of platforms - a dedicated Cisco hardware appliance, a physical server of your own with Windows or Solaris OS, a VMware server with a Windows server OS guest, or a "soft appliance". The soft appliance is package built with the underlying guest OS (a customized RHEL distribution with Cisco's Application Development Environment OS (ADE-OS)) built-in.
Once you have installed LMS 4.2, you should patch - first to 4.2.2 and then to the current 4,2,3. then run the software update feature to bring all package components up to date.
Regarding licensing, there is a Cisco Prime Infrastructure Ordering and Licensing Guide here.
When you order the licenses for PI 1.2 (new customer), you order the base product and then Lifecycle licenses (required for either PI 1.2 Lifecycle and LMS installations - which option is a customer choice) and, optionally, Compliance and Assurance licenses. An upgrade order for an existing LMS customer will include the base PI 1.2 with Lifecycle licenses as well as LMS in a single SKU as noted in tables 4 and 5 of the Ordering Guide.

Can we possible to install exchange server 2010 on my server 2012 Operating system ?

Sir ,
I am planning to install Exchange server 2010 Sp3 . But in my operating system is Windows Server 2012 R2 . So i have to confirm is that possible or not ? Can anyone know please help me. Thanks in advance .

Hi,
As all above saying, it is not supported to install Exchange server 2010 SP3 in Windows Server 2012 R2. Please refer to
supported Operating Systems for
Exchange server 2010:
http://technet.microsoft.com/en-US/library/aa996719(v=exchg.141)
Additionally, Windows Server 2012 R2 will be a supported operating system for Exchange Server 2013 with SP1 coming in early 2014. Let’s waiting for the release about it. For more information, please refer to:
http://blogs.technet.com/b/exchange/archive/2013/11/20/exchange-server-2013-service-pack-1-coming-in-early-2014.aspx
Best Regards,
Winnie Liang
TechNet Community Support

Windows server 2003 operating system

Hi
i am having two Operating systems on my lapto xp and windows server 2003 when i connect my N72 phone in xp it is working fine but when i connect it in server2003 with SP2 it show error there is no available connection type therefore connection to phone can't be established
as i am working in server 2003 i want to connect my phone how can i solve this problem.
Thanks in Advance
Sheen

Hi sheen123,
To install and run Nokia PC Suite 7.0.7.0 ( As per Nokia PC Suite's USer Manual guide) following are the must haves :
• At least 250 MB of free disk space
• One of the following operating systems:
• Windows Vista 32-bit and 64-bit editions
• Windows XP Professional x64 edition (Service Pack
• Windows XP (Professional or Home Edition) (Service Pack 2)
• Windows 2000 (Service Pack 4)
• Administrator rights to the PC to install software on it
So i dont think Nokia PC Suite is compatible with Windows 2003 Server..... Forum correct me if i am wrong

Check file existance in operating system

Dear Collegues,
Is there any function in oracle that checks a file existance located on local disk of windows computers?
Like i have created a file c:\test.txt and i want to check through oracle function that this file exists or not.
Regards,
Imran Baig

Is there any function in oracle that checks a file
existance located on local disk of windows
computers?Let's see if I understand the question correctly ...
- You have two computers.
- One is a client, the other is a database server.
- You want to use an Oracle function, therefore you want to issue a request to the database server, asking the server if a file exists on the client.
Is that correct?
If it is correct, please tell us how the server mounts, or otherwise looks at, the client's disk? Once we have that answer, we might be able to answer your question ...

We bought a reconditioned IMac and time capsule,about a month ago the hard drive died and only left our files on the capsule which could not be retrieved from the time capsule so it got stored as a file on the operating system

Our IMac's hard drive died and we thought great we bought a time capsule to back up the immages and files,except when we had the hard drive replaced the time capsule did not recognize the newer opperating system and would not reboot the files back,so the apple store tech loaded them into a file folder and loaded them to the main screen and erased the time capsule,the problem now is how to load this file back permenantly and watch video's that are stored,when in I Photo when I try to view video content I get a message stating that I may need to download more software to support this format.

If anyone is reading this still looking for what caused the issue and how to fix it here is what I discovered.
The antivirus program our company uses, Bitdefender Antivirus Plus, was causing some of the PDF files not to open. After troubleshooting the different modules and settings the culprit was..
Scan SSL in Privacy Control Settings. Turning it OFF solved the problem and all the PDF files that previously would not open now open just fine. This issue has been sent to Bitdefender for them to review. If you use a different antivirus program and are having this issue try locating the Scan SSL setting and see if turning it off solves the problem.

How can I access restored pdf files after an operating system reload?

was running Windows 8.1 w/ latest updates. developed network properties errors. backed up all docs and restored PC back to Windows 8. Now, the restored pdf file security settings will not allow opening.

Gosh. I found that I need to open the properties page for a pdf file; go to the security tab and click the advance button. Then click 'change' to the right of the owner line, and add me as a user, and then give myself full permissions.
OK, NOW, how can I do this globally at one time to affect all of my pdf files?

Total CPU Utilization Percentage - Windows Server 2012 Operating System

Hi All
I had gone through all the articles and agree with posts submitted, but do we have any KPI stating - ProcessorQueueLength actually tied to the number of logical cpu's.
As Jonathan stated in one of the forums
ProcessorQueueLength actually needs to exceed Processor Queue Length Threshold * Number Of Processors. Where do we find this and how to validate.
We had an issue of CPU been high almost 99% for hours, but never alerted. Any kind of pointers will be helpful, especially supporting statement like Processor Queue Length Threshold is tied up with number of logical CPU's.

Hi
you can create monitoring for performance counter for below counter
Object :System
Counter: Processor Queue Length.
refer below link for more information
http://technet.microsoft.com/en-us/library/cc940375.aspx
for process count refer below link
http://blog.sotec.eu/2010/10/scom-mps-process-count-monitor.html
Regards
sridhar v

No more connections available to this remote computer...Urgent Help for File server...

Hi Guys,
I need urgent help regards to our school File server which is having "No more connection to this remote computer error"
on SMB Shares where I usually authenticate with a domain username it used to work fine since till 3 weeks ago.
Now I can browse the SMB shares with only IP... Netbios gets straight away this error message from non-domain joined pc's where the computer needs to connect to the SCCM distribution point on this file server.
Strangely, Domain joined pc's does not have this problem at all they can use Netbios or IP no problem at all. But someone from a standalone laptop or desktop who needs to access shares through netbios gets this message.
Can someone help me please?
I did check DNS yet there is no problem on DNS I checked PTR record for the server to make sure it is not turned in to multihome accidently but nothing at all.
I also did a NETMON where I captured the data from server and the client I get these errors:
205 4:54:35 PM 16/12/2013
7.3299179 10.2.1.96
10.2.0.13 TCP
TCP:Flags=......S., SrcPort=49312, DstPort=Microsoft-DS(445), PayloadLen=0, Seq=1771710719, Ack=0, Win=8192 ( Negotiating scale factor 0x2 ) = 8192
{TCP:22, IPv4:21}
206 4:54:35 PM 16/12/2013
7.3299668 10.2.0.13
10.2.1.96 TCP
TCP:Flags=...A..S., SrcPort=Microsoft-DS(445), DstPort=49312, PayloadLen=0, Seq=2167618331, Ack=1771710720, Win=8192 ( Negotiated scale factor 0x8 ) = 2097152
{TCP:22, IPv4:21}
207 4:54:35 PM 16/12/2013
7.3301468 10.2.1.96
10.2.0.13 TCP
TCP:Flags=...A...., SrcPort=49312, DstPort=Microsoft-DS(445), PayloadLen=0, Seq=1771710720, Ack=2167618332, Win=16425 (scale factor 0x2) = 65700
{TCP:22, IPv4:21}
208 4:54:35 PM 16/12/2013
7.3301468 10.2.1.96
10.2.0.13 SMB
SMB:C; Negotiate, Dialect = PC NETWORK PROGRAM 1.0, LANMAN1.0, Windows for Workgroups 3.1a, LM1.2X002, LANMAN2.1, NT LM 0.12, SMB 2.002, SMB 2.???
{SMBOverTCP:23, TCP:22, IPv4:21}
209 4:54:35 PM 16/12/2013
7.3307974 10.2.0.13
10.2.1.96 SMB2
SMB2:R NEGOTIATE (0x0), GUID={8447F237-5219-D48A-40C0-29092450C68E}
{SMBOverTCP:23, TCP:22, IPv4:21}
210 4:54:35 PM 16/12/2013
7.3314064 10.2.1.96
10.2.0.13 SMB2
SMB2:C SESSION SETUP (0x1) {SMBOverTCP:23, TCP:22, IPv4:21}
211 4:54:35 PM 16/12/2013
7.3318815 10.2.0.13
10.2.1.96 SMB2
SMB2:R - NT Status: System - Error, Code = (22) STATUS_MORE_PROCESSING_REQUIRED SESSION SETUP (0x1), SessionFlags=0x0
{SMBOverTCP:23, TCP:22, IPv4:21}
212 4:54:35 PM 16/12/2013
7.3324012 10.2.1.96
10.2.0.13 SMB2
SMB2:C SESSION SETUP (0x1) {SMBOverTCP:23, TCP:22, IPv4:21}
215 4:54:35 PM 16/12/2013
7.3339977 10.2.0.13
10.2.1.96 SMB2
SMB2:R - NT Status: System - Error, Code = (109) STATUS_LOGON_FAILURE SESSION SETUP (0x1)
{SMBOverTCP:23, TCP:22, IPv4:21}
216 4:54:35 PM 16/12/2013
7.3341805 10.2.1.96
10.2.0.13 TCP
TCP:Flags=...A.R.., SrcPort=49312, DstPort=Microsoft-DS(445), PayloadLen=0, Seq=1771711788, Ack=2167619070, Win=0 (scale factor 0x2) = 0
{TCP:22, IPv4:21}
217 4:54:35 PM 16/12/2013
7.3357089 10.2.1.96
10.2.0.13 TCP
TCP:Flags=......S., SrcPort=49313, DstPort=Microsoft-DS(445), PayloadLen=0, Seq=2943201172, Ack=0, Win=8192 ( Negotiating scale factor 0x2 ) = 8192
{TCP:27, IPv4:21}
218 4:54:35 PM 16/12/2013
7.3357422 10.2.0.13
10.2.1.96 TCP
TCP:Flags=...A..S., SrcPort=Microsoft-DS(445), DstPort=49313, PayloadLen=0, Seq=3718656547, Ack=2943201173, Win=8192 ( Negotiated scale factor 0x8 ) = 2097152
{TCP:27, IPv4:21}
219 4:54:35 PM 16/12/2013
7.3359768 10.2.1.96
10.2.0.13 TCP
TCP:Flags=...A...., SrcPort=49313, DstPort=Microsoft-DS(445), PayloadLen=0, Seq=2943201173, Ack=3718656548, Win=16425 (scale factor 0x2) = 65700
{TCP:27, IPv4:21}
220 4:54:35 PM 16/12/2013
7.3359768 10.2.1.96
10.2.0.13 SMB2
SMB2:C NEGOTIATE (0x0), GUID={8213462D-2600-D1B1-11E3-65FC4BCDE707}
{SMBOverTCP:28, TCP:27, IPv4:21}
221 4:54:35 PM 16/12/2013
7.3364173 10.2.0.13
10.2.1.96 SMB2
SMB2:R NEGOTIATE (0x0), GUID={8447F237-5219-D48A-40C0-29092450C68E}
{SMBOverTCP:28, TCP:27, IPv4:21}
222 4:54:35 PM 16/12/2013
7.3369702 10.2.1.96
10.2.0.13 SMB2
SMB2:C SESSION SETUP (0x1) {SMBOverTCP:28, TCP:27, IPv4:21}
223 4:54:35 PM 16/12/2013
7.3373474 10.2.0.13
10.2.1.96 SMB2
SMB2:R - NT Status: System - Error, Code = (22) STATUS_MORE_PROCESSING_REQUIRED SESSION SETUP (0x1), SessionFlags=0x0
{SMBOverTCP:28, TCP:27, IPv4:21}
224 4:54:35 PM 16/12/2013
7.3377060 10.2.1.96
10.2.0.13 SMB2
SMB2:C SESSION SETUP (0x1) {SMBOverTCP:28, TCP:27, IPv4:21}
227 4:54:35 PM 16/12/2013
7.3390552 10.2.0.13
10.2.1.96 SMB2
SMB2:R - NT Status: System - Error, Code = (109) STATUS_LOGON_FAILURE SESSION SETUP (0x1)
{SMBOverTCP:28, TCP:27, IPv4:21}
Regards,
Gokhan

Solution has been found,
After doing bit of a backtrack, site DC's were out of sync with PDC with time.
Also Time service was shutdown on PDC which has been enabled and pointed to the Australian pool ntp IP address.
Everything is back on track now.
Regards,
Gokhan Cil

Unable to run a Batch File Operating System Command

Using XI 3.0, I am unable to run a Batch File Operating System Command After Message Processing.
My Batch file:
gpg -se -r BOA3RSKY --armor --passphrase-fd 0 %1 < C:\Progra~1\GNU\GnuPG\gpgin
My Command Line (ID scenario)
exec "cmd.exe /c C:\Progra~1\GNU\GnuPG\boagpg.bat %F"
If I execute
exec "cmd.exe /c type C:\Progra~1\GNU\GnuPG\boagpg.bat >xis.txt"
It displays the contents of boagpg.bat file in xis.txt.
I just don't understand why when I run the batch file, I would expect an %F.asc encrypted file in the same directory as the %F unencrypted file.
Any ideas?
or will I need Basis to create commands that will allow me to run GPG from XI Command Line?

Check this links if its helpful
http://help.sap.com/saphelp_nw04/helpdata/en/bb/c7423347dc488097ab705f7185c88f/frameset.htm
/people/sap.user72/blog/2004/01/30/command-line-help-utility
Check this thread a similar problem
Process Integration (PI) & SOA Middleware
Note 841704 - XI File & JDBC Adapter: Operating system command
http://service.sap.com/sap/support/notes/841704
Try to see the below links
/people/michal.krawczyk2/blog/2005/08/17/xi-operation-system-command--error-catching
OS Command on FTP
OS command line script - Need help
FTP - Run OS Command before file processing
Note: reward points if solution found helpfull
Regards
Chandrakanth.k

Problem in jar file with respect to operating systems

Hi all,
I am creating a jar file in windows operating system, When I deploy it in AIX machine the application is not starting up? There is any operating system specific commands to create jar files?
Any ideas.
Thanx in advance for your help.
Sekhar

I am starting the application through websphere admin
console. When I am starting it is showing error
message that the application unable to start.That you are using WebSphere is a very important bit of information you failed to provide!
WebSphere can be configured to be very picky about what it allows! If your program does not require WebSphere to run then try running it outside of WebSphere.
Also, make sure that the WebSphere container is executing using a version of Java that is compatible with your Application.

How Forms can execute operating system files

How can we create a button which when pressed can execute an exe file from the operating system....
Please help me soon

That's very simple.
Check the host built-in.
You may have something like the following:
PROCEDURE run_rep (x_file in varchar2) IS
-- runs a report not using run_product
-- thus not opening reports background engine
cmdstr varchar2(200);
the_username varchar2(20);
the_password varchar2(20);
the_connect varchar2(20);
pl_id paramlist;
begin
the_username := Get_Application_Property(USERNAME);
the_password := Get_Application_Property(PASSWORD);
the_connect := Get_Application_Property(CONNECT_STRING);
cmdstr:='R30RUN32.EXE module='| |
replace(x_file, '.rep', '')| |'.rep userid='| |
the_username| |'/'| |the_password| |'@'| |the_connect| |' usesdi=yes';
host (cmdstr);
END;
This is something that really works.
In like manner you may run any OS command.
If you wish the command not to display anything on screen, just do:
host(cmdstr, no_screen);
RTM first.
Best of luck,
BD

FAILURE ( 5640 ): FALSE: Verify File: \\SERVER\DeploymentShare\Operating Systems\Image 11-13-2014.wim\image.wim ERROR

Similar Messages

Maybe you are looking for