Family Member Dependents not working in MSS

Hello All,
I have a issue re the Family Member Dependents not working in MSS. I login portal thru Manager. There is one Tab - ESS which has Working time, Employee Search , Benefits and Payments, Personal Information. Under Personal Information there is Family Member Dependents. If I click on this there is an error -
"A critical error has occured. Processing of the service was terminated. Unsaved data has been lost.
Contact your system administrator.
The ASSERT condition was violated., error key: RFC_ERROR_SYSTEM_FAILURE"
I went thru the threads here & found we need to maintain table V_T591A & V_T7XSSPERSUBTYP to resolve this. I did maintain both the tables but still the error exist. Can u gurus pls help to resolve this.
In table V_T7XSSPERSUBTYP
country grouping : 10 (USA)
Infotype/Subtype : 0021 / 1, 2, 11, 12 (Spouse, Child, Father, Mother)
Usecase : A3
In table V_T591A
Time contraint for 1,11, 12 =2
Time contraint for 2 = 3
Can experts point where i am wrong & how do i rectify this error. Any help is very much appreciated

Hello sir,
Please check if your use cases are properly configured.
When I say properly it should be like:
For
usecase = A1, A4, B1, B4 (table V_T7XSSPERSUBTYP)
you should have
zeitb = '1' OR zeitb = '2' (table V_T591A)
For
usecase = A2, A3, A5, B2, B3, B5
you should have
zeitb = '2'
For
usecase = A6, B3
you should have
zeitb = '3'
For more details, please go through note Note 818957 - ESS PersInfo: Guide for Configuration of Use Cases.
Regards,
Bentow.

Similar Messages

  • Family Member/Dependents Dynamic Overview

    Hi all.
    Since there is a gap in the Netweaver 2004 concerning the ESS in MSS I'm developing the same mechanism but from scratch, using the standard RFC's used in the ESS module.
    However I'm having some difficulties in approaching the "Family Member/Dependents" module. I have to bring an overview with the family dependents that may vary from none to several. How can I make an overview that is dynamic, bringing all the dependents from the R/3 building the overview itself regarding the different dependents?
    In a static way, I could make several overviews activating only the ones I needed with the visibility property, but that doesn't seems like the right solution...
    Some help would be appreciated.
    Many thanks in advance.
    Regards,
    Ricardo Nascimento.

    Hello sir,
    Please check if your use cases are properly configured.
    When I say properly it should be like:
    For
    usecase = A1, A4, B1, B4 (table V_T7XSSPERSUBTYP)
    you should have
    zeitb = '1' OR zeitb = '2' (table V_T591A)
    For
    usecase = A2, A3, A5, B2, B3, B5
    you should have
    zeitb = '2'
    For
    usecase = A6, B3
    you should have
    zeitb = '3'
    For more details, please go through note Note 818957 - ESS PersInfo: Guide for Configuration of Use Cases.
    Regards,
    Bentow.

  • Can you delimit family member / dependents in ESS?

    Hi
    Presently withing personal info > family member/dependents there are options to edit and delete the records. Hitting the delete button removes the record from the employees master data in the back end (it would still be there in the change logs but not visible via PA30).
    Is there a way of changing the functionality so that the delete button (which could be renamed)  only delimits a record rather than removes it completely?
    Regards
    Phil

    Delete itself performs the action of delimiting, please check
    1>If you are looking for a way to delimit the info types from ESS portal
    - Yes it is possible. It is dependent of the TIME CONSTRAINTS of the
    info type and its subtype. This is maintained in the table T591A.
    (Filed name: ZEITB) Also this is dependent on the USE CASE. The use
    cases for an Infotype is maintained in the view V_T7XSSPERSUBTYP, you
    can refer the note 965324 for more info about use cases.
    records created on the same day and then try to delete it from ESS will get deleted
    But older records trying to delete today from ESS will only delimit the record.
    please check

  • To add secondary infotype to Family Member/Dependents for all the countries

    Hi,
    I have a requirement to add secondary infotype IT 0106 to the infotype Family Member/Dependents for all the countries. I have used table T582V. But still it is not appearing. Please help.
    Thanks

    Hi,
    You need to do following steps .
    ~ Maintain Feature "IVWID " for your country grouping
    ~ Maintain table "V_T582V"
    "Country grouping as per "IVWID " 0021 V106 MP010600 0100 Family Member/Dependents
    ~Maintain table "V_T582W"
    ~Maintain table T591S

  • Family Base restrictions not working

    We setup a family base account per the instructions and video. The time restrictions seem to be working fine but the list of trusted numbers is not working. Our son is still able to send and receive text messages through his iPhone 4 to anybody unless we specifically block their number on the Verizon account.
    We found that even with Family Base restrictions setup, imessage bypasses those restrictions so we turned off imessage on his phone and setup restrictions on his iPhone itself. This stopped him from being able to use the imessage feature of the iPhone but people who are not setup in his trusted numbers are still able to get text messages through. We're frustrated because the family base is not working the way it's supposed to and we're being charge for this "feature." 

    Hi Billiam!
    I'm sorry for any inconvenience with your son's iPhone 4 and the Family Base feature. Upon review of this feature, I see that the child companion app is not compatible with the iPhone device. Some features will work, and some will not, but this is due to the design of the iPhone. Here is some additional information for you: http://vz.to/15gGAxd
    ChristinaB_VZW
    Follow us on Twitter @VZWSupport
    If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

  • Family Locator Does not work

    After about two day of getting reports the service stops and the only way I get it to start again is to log in to the website and locate my family member then I get all the old location report to me at once via text. Then it works for a couple more day and stops. Has been doing this for at least a month. Not the phone change phones same thing . . Removed the client and reinstalled same thing . . . This service is a joke!

    We just got a phone for our daughter and added the family locator to it (she has the Intensity 2).  This software, I have to say, is a joke.  We both have Droid X's and the best that we can get is a target range of anywhere between 2 and 5.6 miles.  Umm, considering most of her locations are with a half mile of our house, how does this gigantic target range do anything for us?  I also sent up some Updates, like sending us a text whenever she gets to school or leaves it.  Drove her to school today and have still not recieved any texts letting me know that she arrived... 
    Inside or outside, this service does not work.  Even better, the only app that Verizon endores for this feature doesn't even work on most phones.  Add it to our Droids, pick it, welcome screen comes on, pick 'OK' and it kicks out.  Every time.  Over and over.  Finally downloaded family locator (V) app from somewhere else but it still behaves just like the family locator website - "your phone has been found in an 5.6 mile radius of such-and-such address" !  Brilliant.  Glad we haven't lost her yet..........
    I would like to cancel this service, but apparently Verizon does not want you to have an easy way to do this.  There is no location anywhere on the website where you can disable this (worthless) feature.  I guess I need to, yet again, call customer service.

  • F4 help not working in mss requisition form for erec

    HI,
         I am getting a problem while filling a mss requisition form for E recruting Ehp 4 . F4 help is not working for position id & org unit.it is not returning values while searching.I am using form scenarion sqr03.Plz suggest any solution.

    HI,
         I am getting a problem while filling a mss requisition form for E recruting Ehp 4 . F4 help is not working for position id & org unit.it is not returning values while searching.I am using form scenarion sqr03.Plz suggest any solution.

  • ESS Family Member/Dependents Fields

    Hello Everyone.
    We have implemented ESS (ECC6, Portal 7 SP13) and the Family Members/Dependents screen is coming up. However, on the screen when we try to add a Spouse or a child, there is no field to capture their SSN or address. What steps do we need to enable the SSN and the address fields to show up?
    Thanks.

    OK, I am not that experienced at this so I am trying to give you the best info I can from my side. I really appreciate your help.
    So, I imported the project into my NWDS through our NWDI. On opening it in the WD Perspective, I went to WebDynpro->WebDynpro Components and there I saw a number of components with some views in them. There is a component in there called VcPerFamilyUSDetail that has a view (called DetailView) which includes all the fields I need and the SSN/Address etc. are visible. Also, I checked its mapping and it is doing the mapping to the correct fields on the SAP side i.e. PERID and STRAS.
    However, this is not what I see on the portal when I go to this App. I am thinking (but not sure) that I probably see the view under VcPerFamilyUSOverview instead since that view is not mapping the SSN and Address fields. Although, when I try to open that view (called BizCardsView), it does not show me anything.
    So, I am guessing I somehow need to re-point my ESS to access VcPerFamilyUSDetail instead of VcPerFamilyUSOverview. Is that correct? And if so, how would I achieve that?

  • Family sharing is not working

    So today I downloaded IOS 8 on both devices, Ipod 5th generation and Iphone 4S. they both have different accounts. i set up the family sharing on both devices and they were both set up. i went on the Ipod 5th generation to download the previous purchases from the Iphone 4S and all the apps show up but when i try downloading it it comes up with a "redownload unavailable with this apple ID" then it says this download is not available for this apple ID either because it was bought by a different user or the item was refunded or cancelled. i now it was not cancelled or refunded because i play it on my Iphone 4S and it works. then i tried a different paid app and it does the error again saying the same thing. please help!!!!!!!!!!!!!

    Same issue.  Annoying.  I was looking forward to this feature more than any other in iOS 8.
    I was able to manually sync the applications from iTunes to the phone, but not via the phone only (the iCloud app store download).  I get that "Update Unavailable with This Apple ID" error "because it was bought by a different user or the item was refunded or cancelled."
    One of the applications I was able to install successfully via iTunes wouldn't update either, so I logged out of my spouse's account to see what would happen when I tried to update it.  It just spun and spun and never updated.  I restarted the phone, tried again (with her ID) and it gave the error.  Logged out and into my account, and was able to update.
    If the error is caused by application developers not "allowing" Family Sharing, I'm afraid most old applications which aren't being updated anymore will never work.  Again, this sort of deflates the value of the "feature". 
    Either this is a poorly implemented feature with a lot of bugs, or Apple misled us into believing this feature was something that it isn't.

  • Adobe form not working after MSS Patch Upgrade

    Hi,
    We have implemented ESS/MSS and in one of the MSS scenario to create a new personnel chnage request we have an Adobe interactive form (WD) which actually validates the users Social Security number by calling an RFC in the ECC 6.0 and updates the form's filed on the front end. There was an issue of "Expired SSO Ticket" and to resolve this SAP recommended to apply SAP_JTECHS (SAPJTECHS13P_14-10003467) and SAP_JTECHF (SAPJTECHF13P_15-10003468) patches to fix the problem. But after applying these patches Adobe form for PCR has stopped working and it just gets hanged, form appears on the front end and when user enters the values and hit enter to validate, it doesnt communicate with the Backend ECC system only the SAP status picture keeps rotating, i turned the trace ON and checked it, its not at all communicating with the ECC system. Where as in other systems where we have not appplied the pacthes, those are working fine. One of the error i noticed in the server log is as below:
    jco.client.mysapsso2=AjExMDAgAA5wb3J0YWw6QkNPTFNUT4gAE2Jhc2ljYXV0aGVudGljYXRpb24BAAdCQ09MU1RPAgADMDAwAwADU1BEBAAMMjAwODExMDMxNjU3BQAEAAAAEAoAB0JDT0xTVE//AQUwggEBBgkqhkiG9w0BBwKggfMwgfACAQExCzAJBgUrDgMCGgUAMAsGCSqGSIb3DQEHATGB0DCBzQIBATAiMB0xDDAKBgNVBAMTA1NQRDENMAsGA1UECxMESjJFRQIBADAJBgUrDgMCGgUAoF0wGAYJKoZIhvcNAQkDMQsGCSqGSIb3DQEHATAcBgkqhkiG9w0BCQUxDxcNMDgxMTAzMTY1NzQwWjAjBgkqhkiG9w0BCQQxFgQUfD7V7TS!58cgzIFyucxCSL4ltuswCQYHKoZIzjgEAwQvMC0CFA4Q0!Rr2xYFPwFwXz8WeFF1UALlAhUAmHiTdHw!3s4Q!Jc9gDyY4QSvxa4=, user=, mshost=sapdv2.company.com, r3name=DV2, jco.client.type=B, jco.client.trace=0, group=SRS, codepage=1100}
    Client not connected#
    #1.5 #76C1EDD07B440026000000000007501600045ACC2EF6809D#1225732914577#/Applications/BusinessLogic#sap.com/home~zb2bzsrs#com.sap.isa.core.eai.sp.jco.JCoConnectionStateful#BCOLSTO#1480##hadspd1.bnet_SPD_306896250#BCOLSTO#daca9e30a9cb11dd99c976c1edd07b44#SAPEngine_Application_Thread[impl:3]_19##0#0#Error#1#/Applications/BusinessLogic#Java###Error occcurred in EAI layer "".#2#com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Error in module RSQL of the database interface.#parameters: [client]='null' [user]='null' [language]='null' [ashost]='null' [systemnumber]='null' [mshost]='null' [gwhost]='null' [gwserv]='null' [group]='null' [systemid]='null'
    Properties: {passwd=?, lang=en, client=150,
    Can someone please suggest what could be the possible reason for such a problem with Adobe form and whats the way out to resolve this. Appreciate a quick help in this regard.
    Thanks in  advance,
    Sarabjeet.

    Hi,
    We had the same issue after the Patch update to SP17 in both Backend as well in Portal, to resolve my colleagues had a look at the standard forms which were working and found that because of the patch update the script used in the custom forms was changed and not the standard and
    on event trigger which was processed in the container they replace the script to the standard one. and it started working.
    But this is not the solution we are looking at solution on having the same version of script as in the standard even after the patch update.
    So to your point to resolve compare the scripts in both standard and customized forms and do the same.
    And also have a look at the SAP Note: 1109392
    .... this is a temporary solution.....
    Hope this helps.
    Cheers-
    Pramod

  • "member of " not working with nested table of dates

    Can someone explain why this doesn't work. The last select does not return any row. When trying the same with a table of number, it works fine.
    drop table test;
    drop type date_tab;
    create type date_tab as table of date;
    create table test(dates date_tab) nested table dates store as dates;
    insert into test values (date_tab(to_date('10-jan-2007'),to_date('15-jan-2007'),to_date('15-jan-2007')));
    commit;
    select * from test where to_date('10-jan-2007') member of dates;
    Line above should find the row, but does not return anything.

    > With 10G Oracle said that these two engines are now sharing the same source code
    Is that documented somewhere? Regarding database versions, it was 9.0.1 that claimed an integrated parser. I don't see any update for 10g.
    > So in the old days one had to do a [SELECT sysdate INTO d FROM dual] to assign a function value to a PL/SQL var - as the function did not exist in PL/SQL.
    Then (from Oracle 7 onwards?) these functions were also available in PL/SQL. However, the two engines did not share common code. So functions in SQL did not always behave like function in PL/SQL and vice versa.
    I don't recall that limitation in PL/SQL v1 (Forms 3 to 4.5, and database v6, though I doubt many people actually used PL/SQL on the database because (1) it was separately licensed, and (2) it didn't have stored procedures) - but then it was a while ago so I could be mistaken.
    I know USER, SYSDATE and others used to be implicit queries of dual (i.e. the supplied PL/SQL function was just a wrapper containing SELECT SYSDATE INTO dt FROM dual; RETURN dt;) although that's probably just confusing the issue.

  • Education Report Not Working in MSS

    Hello experts, I am having an issue with one mss report for Education and training. The rest of the reports are working fine. Also when I go to LPD_Cust and click on MSS ITS_NAV1 I get a message reading "Please run report ABP_LPD_CORRECT_TEXTABLES in the system. I ran the report and got a number of messages. I am not really sure what is the significance of those messages. Your prompt help would be highly appreciated!!

    my dear,
               Please contact your basis consultant.

  • SAP_MANG Evaluation Path not working for MSS after ECC6 Upgrade

    Hello All,
    We are upgrading to ECC6 and still using an older version of the java/HTMLB MSS Business Package. We are seeing strange results in the vacancy request overview iview (team viewer like component)  which is using a view driven by SAP_MANG Evaluation Path.
    SAP_MANG looks like this...
    10 * B 008 * S
    20 S A 012 * O
    30 US A 208 * P
    Our View is ZRCPOS using...
    Eval Path - SAP_MANG
    Eval Objects - O_NACH_S
    Initial Evaluation Depth - 3
    Column Group - ZRC_VACREQ_OV
    Header Type - RC_VAC_HEADER
    The iview is meant for position maintenance and should show a dropdown of orgs. When an org is selected a list of positions/holders is shown to modify, delimit, etc. The problem is that in the dropdown "Select organizational unit to display positions" instead of...
    Test Org 1
    Test Org 2
    We have...
    Test User1
    Test Org 1
    Test Org 2
    ...so the user us shown as an org. Right off I suspected the upgrade to MSS 60.1.22 (the newest version of the old Business Package) so I installed the older versions of the components and the actually still worked but also showed this condition. So I have ruled out the java side as a source of the problem.
    Looking at HRP1001 I see the following relationships among suspect objects.
    Object P 1234567 to Object S 9876543 via B008
    Object S 1234567 to Object O 9876543 via A012
    no relationships US to P via A208
    Given the Eval Path above, does anyone have any idea why this would display this way or have a suggested approach to solve.
    Thanks,
    Doug

    >
    Doug Steckel wrote:
    > Hi Ranganath,
    >
    > Thanks for the quick reply. Yes the Skip flag is set on relationships 10 and 30. I would also think that would prevent this but it is not.
    >
    > Thanks,
    > Doug
    not all relationships represent physical data records in the database.  some are derived and without looking at the system, I believe the US 208 to P is a derived relationship.
    Are you sure all the users you are testing with have a proper sy-uname setup for all respective pernrs in PA0105?

  • Report launchpad is not working under MSS

    Hi,
    We are configuring MSS and now the report launchpad is showing errors like Role: MSS instance: REP NOT_FOUND.
    I know we need to configure the MDT scenario and then change the iView property. But I could not find the documentation on which property in the launchpad iView to change and how to change it to mactch the scenario we defined in MDT.
    Can anyone help?

    hi,
    Even i had the same probelm.. which i reported to SAP.. they replied me with folowing message :-
    hanks for the message.
    Kindly check whether corrections of Note 940552 are implemented in your
    system.
    Some of the customers reported the same issue. In their case they
    got no reports if they run program #PWPC_CONV_MDT_TO_LPA# with type
    #RPT0# because the Report Launchpad was not initialized.
    You could also solve the problem if you start the customizing of the
    report launchpad. ( Transaction FPB_LP_MSS_REP_CUST )
    If you do that the first time you will get a popup
    that ask you whether you want a tree at the left side or not.
    For the Manager Self Service you could say no and then you must save
    the launchpad.
    Now the launchpad is initialized and you could run the report for
    inserting the MDT reports.
    If you want also add the financials report please implement at first
    the correction at note 954301.
    After that you could also insert the Financials reports.
    I asume certain table contents are not delivered, because they form partof Launchpad customization.
    Please implement any of the two solutions;
    1) (Preferred sol.) Start the customization of the Launchpad (
    Transaction FPB_LP_MSS_REP_CUST ). Check that table FPB_LP6_SNI is no
    longer empty, and has the required entry. Then run the transaction to
    convert.
    2) Manually add the line to table FPB_LP6_SNI. The values are role =
    'MSS', instance = 'REP', and sni_used = ' ' (blank). Then run the
    transaction to convert.
    Regards
    Jigar Oza

  • ICloud for a family account does not work

    We could not use iCloud for our family for multiple computers and devices with one [email protected] The details..
    These are our devices -
    Two iPhone 4's (me and my wife)
    One iPhone 3G (my daughter)
    MacBook Pro
    MacPro
    Mac Mini
    iPad2
    We want to use one [email protected] account for iTunes
    To use iCloud on all my iPhones with one [email protected] account, all our contacts, calendars, photos will be downloaded to all devices. The problems are - Why would my calendar, contacts and emails show up on my wife's and daughters iPhones
    The reason to use one [email protected] account for all computers, iPhones and iPads are - any iTunes purchases need to be available for the entire family to enjoy. If we used different @mac.com accounts, we will have to purchase the same song or iBook multiple times. This defeats the main reason for iCloud.
    I am shocked that Apple did not envision this problem with one family account. If they do have a solution, I could not find it. I called technical support as well as go to the local genius bar. They all suggested getting different @mac.com accounts for each iPhone device. This is counterproductive and defeats the purpose of one ecosystem that Steve Jobs always preached.
    Any suggestions..

    You can use one Apple ID in itunes for all your purchases.
    You can also use different IDs in iCloud so that each ID keeps whatever devices are registered to that ID are kept in sync.  If you don't want you wife's and your calendars to be identical, then you need different IDs.  Again, you can all keep the same Apple ID for your iTunes purchases.

Maybe you are looking for

  • New internal SATA Drive can't access internet or e-mail

    I'm re-posting this since it never got resolved, but I've paraphrased to try keep it more concise: I recently added an internal 500GB SATA drive (and PCI card) to my G4 (partitioned 100GB for apps and remainder for storage). The old HD is running OS

  • I CAN'T OPEN ITUNES  QUICKTIME

    I NEED TO KNOW HOW TO OPEN ITUNES+QUICKTIME

  • Error messages when trying to mark response as "solved" or "helpful"

    For about 3 weeks I receive error messages when I try to mark any responses to my questions as "helpful" or "solved." I've posted the error message below. Is there a way for me to solve this? I have been unable to find contact info for a system admin

  • Convert 0-10 volt to 0-5 volt

    I apologize if this isn't the correct forum.  I need to convert a 0-10 volt analog square wave signal to 0-5 volt to use with the USB-634. Thanks in advance. LabVIEW 2012 - Windows 7 CLAD

  • Status code 404

    I've deployed a web application to a hosting provider. The application works on my local machine but when I try to run the application from the hosted server I see the 404 error page produced by Tomcat. ETA - I know that 404 means resource not found.