Fan Part Numbers for Cisco 2801, 2821 and 2851 fans

I have P/Ns for Cisco 2811 router fans as follows:
ACS-2811-FAN-1/2= and ACS-2811-FAN-3=
But I do not have part numbers for fans used in 2801, 2821 and 2851 routers.
Does anyone have these prt numbers?
It doesn't make sense to change the whole router for just a fan failure.

Hi
for the 2821 and 2851 routers the fan is the same : ACS-2821-51-FANS=
for 2801 the whole chassis needs to be replaced

Similar Messages

What Service Restarts the Data Calculations for Cisco Supervisor Desktop and Wallboards

Hello All,
UCCX version 8.0.2.11005-20
UCCX is running in HA mode.
Yesterday we believe our UCCX Servers failed over due to a network outage between the Publisher and the Subscriber.
So last night I restarted the "CCX Engine" to fail-back the servers, which worked just fine.
Now today the database that our Wallboard uses is not showing any data. So I ran some SQL statements on both Servers' CLI and the Database db_cra is showing old data on the Subscriber and the Publisher is showing all Zeros. But after just looking at the Real-Time Reporting page on the Web GUI, that "seems" to be working but I'm not positive because I have nothing to compare the numbers to...
When I try to run Supervisor Desktop, I can open the Program, sign-in, and then when I choose the "team" and then try clicking on a CSQ Name, Supervisor freezes and I get a "Not Responding" message. I thought it was just my PC but this is happening for 2 other people as well, on 2 completely different PCs so I can rule out that its the computer that is killing Supervisor.
Is there another service that needs to be restarted in order to get this working? I tried restarting the service for "Cisco Desktop Recording and Statistics Service" and I was nervous about restarting anything else because we are currently open and our CallCenter is taking calls.
Any thoughts would be much appreciated!
Thanks in Advance,
Matt

Has your problem cleared up? Did you do anything, such as a reboot or open a TAC case?
Anthony Holloway
Please use the star ratings to help drive great content to the top of searches.

Exact Apple part numbers for original Discs that came with late G5 Quad?

If anyone happens to own a G5 Quad made 2006 and you still have the original Software Restore discs that came with it, I'd be much obliged if you would be kind enough to post the exact Apple part number(s) for said discs.
I have a Power Mac G5 Quad made in the third week of June, 2006, and it is my understanding that it originally came with either Tiger 10.4.2 or Tiger 10.4.4.
I'm very enthusiastic about this machine and very happy with its performance. I'd like to search through the stacks of gray OS discs at local second-hand electronics shops for a matching set of discs. It's more of a curiosity, as I do have retail Tiger and Leopard discs off of which the Quad boots just fine.
Thanks in advance.

Hi Ramon,
I actually have both sets of discs. I have the disc set which came with the G5 Quad I own and its 10.4.2 while I do have another disc set which is 10.4.4 and it has also a OS 9.2.2 disc of its own for classic. When I get home later today I can see what other discs I have.. I will post the part numbers for you when I get home.
Take care..
Romko

HP Deskjet D1560, Need Part numbers for power supply parts

I have an HP Deskjet D1560 still in the box. Does not have power adapter and power cord. (My daughter took them for her printer.) Where can I find the part numbers for the power supply parts? I live in the U.S., so I need the power cord that will fit in a U.S. outlet. The power cords in the product section are for the Middle East, Europe, and England. I need the one for the U.S. Where can I find that part number?

The power supply is part number 0957-2231 and the associated US cord is part number 8121-0889. I usually pick these up on eBay if I need a power supply, see the listings here. Make sure the power cord is included, it may be listed as a seperate item.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Power supply part number for Cisco 2900

I need to know what are the part numbers for installing the redundant (second) power supply.

Hi,
Have you tried sh inventory.
I am able to see with same command on some different platform
#sh inventory | inc Power|SN
NAME: "slot 24", DESCR: ***** AC Power Supply"
PID: 34-0820-01 rev B0 dev 0, VID: V01, SN: CAB014501HN
Regards
Mahesh

Looking for part numbers for ESW-520-24 rack mount brackets

We have missplaced the two L-shaped brackets to mount our ESW-520-24 switch into a rack. Does anyone have part numbers for them?

We have missplaced the two L-shaped brackets to mount our ESW-520-24 switch into a rack. Does anyone have part numbers for them?

HP in part numbers for ink differ in the uk and the US for the same item ?

Purchasd my printer in the UK. PHOTOSMART 2575 ALL IN ONE
Trying to source the correct HP ink
C8767E on the back of the cartridge. is not recognised
C8767EE is recognised as HP 339 Black Inkjet
I am directed to the US site.
niether is recognised by the us site where i will buy my replacements
if i search the US site by model number I get HP98
http://h10025.www1.hp.com/ewfrf/wc/product?product=457333&lc=en&cc=us&dlc=en&lang=en&cc=us&y=10&x=7
and no sign of the 336 337 or 339 as listen on page 85 of my userguide.
I assume there is some cross matching of part numbers between the UK and the us site.
Having spent two weeks wandering around all the stores in Mandeville and Kingston Jamaica ( no mean feat i can tell you) looking for the 33 series as lised in the userguide. It will be with mixed blessins if there is a comparison chart between what the UK says I can use and what the us says I can. Then I can go shopping locally with my us part numbers and people might actually have stock.
If i assume that the 98 is the correct number there is not even a list on the site to confirm what printers the 98 can be used on.
Come HP you have not done well on this issue. Basicis such as catrirdge supplies should have global partnumbers or I should be able to easily acesss a compatibility Matrix.
And ive not started looking for colour yet.

Hi, if you purchased the printer in the UK and have now relocated you'll need to get the region reset on the printer. You can do this by contacting phone support ( Contact HP ) . Hope this helps..
Although I am an HP employee, I am speaking for myself and not for HP.
Twitter: @Ciara_B_HP

Where can we find the part numbers for Multisim and Ultiboard professional versi

I want to purchase Multisim an Ultiboard, professional version. We got a quotation with the following answer:
Part number: 852798-11J Upgrade, NI Academic site licence;Q3 2009 Department Teaching Circuit Design Software Option
Part Number:900798_11    NI academic Site Licence-Department Teaching Maintenance for Circuits Option Includes automatic SW upgrades for 1 year
I have no idea where I can find those part numbers on the NI web site and for me the qouotation reffers to the academic version not the professional.
Can anybody from NI clarify the mystery.
John

Johnnelu,
Thanks for your reply.   If you received a quotation, please email me directly with the quotation number and I will have someone update this for you. I am not sure why you would have received a quote on the educational version in place of the Professional version.
Specifically answering your PN questions... here are the current P/Ns for the Professional Design Suites (Multisim and Ultiboard).
NI Circuit Design Suite, Base ->          779930-09
NI Circuit Design Suite, Full ->            779928-09
NI Circuit Design Suite, PowerPro -> 779927-09
http://www.ni.com/multisim/professional.htm
You can get price information online - you will need to select the specific item on the left and
set your country code on the top.
Regards,
Patrick Noonan
Business Development Manager
National Instruments - Electronics Workbench Group
50 Market St 1-A
South Portland, ME 04106
Phone: 207 892-9130
Email: [email protected]

Please tell me part numbers for ASA and VPN licence order

Hi all
I wish to order a ASA 5515-X firewall with 250 vpn ssl licences plus the licences for mobile devices
Can anyone tell me the part numebers for this ?
cheers
Carl

I was expecting pooch pooch's recommendation to be the cheaper, but I get a slightly lower price this way, BUT check with your own in-country Cisco partner first!
SKU
Description
Quantity
ASA5515-K9
ASA 5515-X with SW 6GE Data 1GE Mgmt AC 3DES/AES
1
ASA5500-SSL-250
ASA 5500 SSL VPN 250 Premium User License
1
ASA-AC-M-5515
AnyConnect Mobile - ASA 5515-X (req. Essentials or Premium)
1
ASA5525VPN-PM250K9 is a VPN bundle for the 5525-X that might be worth a look. As you probably realise, there isn't a 5515-X VPN bundle for 250 connections.

All part numbers for a UCS installation

where can I find this?

To ensure that all solution components are ordered, you'll need to use one of the below tools. Also, make sure to adhere to design guidelines for other components.
Netformx DesignXpert
http://www.cisco.com/go/designxpert
Cisco Solution Expert
http://www.cisco.com/go/sx%7C
Cisco Commerce Workspace
http://forums.cisco.com/ecom/web/ccw
You can also open a case with PRH (Pre-Seller Helpline) team and they can help with part numbers.
For Planning, Design and Implementaion
http://www.cisco.com/go/pdihelpdesk
-HTH
Zouheir

How do i find my Apple Parts Numbers for my Macbook Pro?

I have a macbook pro, 2.4GHz Core 2 Duo. Model number is A1212.
I was wondering how I could find out what the correct apple part number is for a replacement top case. (the place where you put the keyboard).
I have no problem replacing the case, I just need to know what the part number is.
I also have another top case that I ordered off ebay and I would like to know how to find the correct apple part number for that case as well.

A1212 is not your model number. Check here for model numbers:
http://www.everymac.com/systems/apple/macbook_pro/index-macbookpro.html
Check here for parts:
http://www.ifixit.com/Categories/MacBook-Pro-15-Inch/85
But for Apple part numbers you may need to call ifixit or contact Apple.

Part Numbers for Master Collection CS4

Hi there,
I'm really sorry for asking what is a very basic question, however I was wondering if anyone knows the Adobe part number for the UK full retail Adobe Master Collection CS4? I'm thinking about it second hand however I want to make sure that the software is legitimate and licensed for use in this country. I have Googled this but, suprisingly, didn't find any results which I'd consider to be a bit odd.
The part number of the product I'm considering buying is: 65025303
Thanks for any guidance you can offer!
Regards,
Stu.

Thanks for the information - I was quite surprised that the part numbers weren't available online anywhere. I contacted the seller who informed me the software was purchased in the UK, however the box said it was made in the US and I understand the UK releases say they're made in Ireland. The seller didn't confirm where the item was purchased from, so I decided against it. There was definitly something a little suspicious about the deal.

Dedicated supervisor engine slot numbers for cisco core switches

I want to know why there is Dedicated supervisor engine slot numbers in core switch.
Feature
Cisco Catalyst WS-C4503-E Chassis
Cisco Catalyst WS-C4506-E Chassis
Cisco Catalyst WS-C4507R+E Chassis
Cisco Catalyst WS-C4510R+E Chassis
Dedicated supervisor engine slot numbers
1
1
3 and 4
5 and 6
Please make it clear why its dedicated slot alocate for supervisor engine slot

Hi,
I think the reason behind a dedicated slots for Supervisors of 4500/6500 chasis is due to the architectural constraints.
For example the Sup 720 in 6500 has 18 fabric channel (18 connections to the fabric), the line cards have only 1/2 fabric channels depending on their version. So if you have to make a supervisor independent of the slot you need to have 18 backplane fabric channels in each slot of the chassis for the SUP to work in all slots as compared to 1/2 backplane fabric channels per slot as we have right now for the line cards. Almost same should go for the 4500. And this might come across as an architectural constraint. This is the best explanation i can think of.
Thanks
"Please rate the post if found useful"

Third Party CA certificate requirement for Cisco expressway C and E

Hi All,
We have implemented MRA solution for our customer, We had ask to procure the CA certificate from Third party CA certificate issuing vendor.
We had shared CSR request generated from Expressway C and E application to generate SSL certificate, As per cisco document we had ask to procure “Quick SSL premium single domain” CA certificate for Expressway Series E and C server but as per the certificate issuing vendor, the application required “Quick SSL premium multi domain” as they observed extra SANs in CSR generated from the Expressway C and E applications. Need help to find out application required certificate, who are using Third Party CA certificate for MRA solution.

First of all, I don't see how you cant get away with single domain certificate. I have looked into this more. This is because you need to add your domain name in the SAN as detailed below.
Secondly, I am not sure where you are going to generate the certificates from..You should generate your CSR from here..
Go to Maintenance > Security certificates > Server certificate
NB: Customer’s service discovery domain is required to be included as a DNS SAN in all Expressway-E server certificates
This is what the CSR page looks like

Retrieve Multiple Serial Numbers for given Delivery Document and Item

Hello Experts,
                      I am currently working on a 2Lis datasource to extract Delivery information.Now it is required to append the
datasource with field (say ZZSERNO) which should extract ALL Serial Numbers from OBJK table for a given Delivery Item.
I know that there is a link between table SER01 and OBJK to retrieve the same.However, my concern is- C_T_Data table is
already providing the Delivery Information and along with that I want to display ALL Serial numbers for a given Delivery Item.
A delivery Item can have more that one serial number linked to it as what I see in VL03N for a Delivery document.
So currently in RSA3, I retrieve say 1 record for a given Delivery Document and Item .Now an Item has say 10 Serial Numbers
associated with it, so i should see 10 Records for that Delivery Document and Item, after executing RSA3.
Please provide me with the CMOD logic to do so.

Hi,
You can Link LIPS and OBJK tables with Delivery and Del Item.........refer below for the code.
1) Declare an Internal table of type OBJK with fields DEL DOC, DEL ITEM and ZZSERNO .
2) Declare another Internal Table ITAB_LIPS of type LIPS with required fields say in your case *DEL DOC, DEL ITEM and ZZSERNO....etc.
3) Use below select statement to extract records from LIPS into ITAB_LIPS that you have declared for to fetch LIPS data.
Select DEL DOC, DEL ITEM ( here i have included only few fields but as per requirement please add fields here)   from
LIPS into corresponding fields of Table ITAB_LIPS.
4) write one more select statement to fetch Serial number data.
Select DEL DOC, DEL ITEM ZZSERNO from OBJK into corresponding fields of TABLE ITAB_OBJK for all entries in ITAB_LIPS
where DEL DOC = ITAB_LIPS-DEL DOC and
            DEL ITEM = ITAB_LIPS-DEL ITEM.
Loop at ITAB_OBJK.
Read table ITAB_OBJK into ITAB_LIPS with keys DEL DOC    DEL ITEM.
ITAB_LIPS-DEL DOC = ITAB_LIPS-DEL DOC
ITAB_LIPS-DEL ITEM = ITAB_OBJK-DEL ITEM.
IF SY-SUBRC = 0.
ITAB_LIPS-ZZSERNO = ITAB_OBJK-ZZSERNO.
ENDIF
ENDLOOP.
Hope the above code helps
Sujan

Fan Part Numbers for Cisco 2801, 2821 and 2851 fans

Similar Messages

Maybe you are looking for