Fast Track Pro, USB, showing as a storage device, not audio

Sorry; I think this has been solved but don't know how to delete the thread.

Have you tried the Audio MIDI Setup utility to see if it is recognized there?

Similar Messages

USB Thumbdrive causes "Mass Storage Device Not Responding"...

Everytime I connect a thumbdrive to my MBP, I cannot eject it. I always get the "disk in use" message.
When I go into Activity Monitor, I see "Mass Storage Device Not Responding" and it's eating up a lot of system resources.
After a short period of time, the fan will come on full blast, and stay on until I force the program to quit.
The only way I can eject the thumbdrive is to force quit through Activity Monitor.
I've tried multiple thumbdrives on every USB port and I get the same result.
I've searched through the Support site, but haven't found a solution.

Hi @Eman_Gamal
Welcome to the HP Forums!
It is a terrific place to find answers.
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I grasp that your USB ports are no longer functioning correctly. When you checked Device Manager under device status you see this message" cannot verify the digital signature for the drivers required for this device".
As they were previously working have you tried rolling back the drive in Device Manager?
Have you ran the HP Support Assistant to acquire any HP updates?
Have you tried using MS Fix it ?
Here is a link to the recommended drivers for your notebook. HP Pavilion dv6-6c45se Entertainment Notebook PC Drivers Please ensure you have all the latest updates installed.
If the above has not helped as it was previously working you could try a restore back to a known good date.
Using Microsoft System Restore (Windows 7)
Lastly you could do a recover back to factory.
Performing an HP system recovery (Windows 7)
There is an opportunity during the recovery to backup your personal files to prevent data loss. Now is the time to do one if not previously done.
Restoring Files that were Backed Up Using HP Recovery Manager (Windows 7)
At any time you may contact HP support for assistance. They can remotely access your system tto help you overcome difficulties.
Please call our technical support at 800 474 6836. If you live outside the US/Canada Region, please click the link below to get a support number for your region.
World Wide Phone Support
Good Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

M-Audio Fast Track Pro to CS6?? having some major rookie problems.

AT2020 mic plugged into mic1 on Fast Track Pro. Fast Track Pro USB connect to Windows 7 computer. In CS6.. under "Audio Channel Mapping"... Default Stereo input is M-Audio USB ASIO... Output is M-Audio USB ASIO. Under "Audio Hardware"... Device Class is ASIO and the Device is M-Audio USB ASIO (there is a box next to "Release ASIO driver in background) that is NOT checked.
I *believe* I have everything hooked up correctly.
BUT.... THEN WHY ON GOD'S GREEN EARTH CAN'T I RECORD OR HEAR ANYTHING.
I've got a mic signal on my Fast Track Pro, but NO levels in CS6...
Not to mention anything in my headphones.
I know this question has been asked 1000 times, but...
if you're kind enough to walk me through this, I'll send you a Starbucks card, a Subway card, ....some sort of gift card worth $10.
Seriously.
Thanks in advance

You've got a couple of options.
Frankly, the best will be to use the direct hardware monitoring feature on your Fast Track Pro. There's a monitor knob on the front of your interface--turned hard left, you'll be monitoring your input; as you turn clockwise, you'll be mixing in any background stuff coming from Audition (music beds, etc.). You may need to make some adjustments in the control software that came with the Fast Track Pro but, set up as you are, it'll probably be okay as is.
The second option will be to monitor via Audition. To do this, make your recordings in Multitrack mode (there are good reasons to do this anyway, not least the writing direct to files rather than a temp folder that has to be saved later or lost forever). In Multitrack, in the control panel at the left hand end of every track there are a series of buttons: M S R I. The "I" button stands for input and routes the input to that track to the output for monitoring.
The reason I suggest using the hardware monitoring in the Fast Track is that there'll be some latency in the round trip via your interface then computer. Whether this latency is enough to be disturbing will depend on your system and other settings...but it doesn't take much latency to make voice recording difficult.
Hope this helps

Can't adjust recording level with M-Audio Fast Track Pro

I downloaded the appropriate driver for my M-Audio Fast Track Pro interface & everything looks fine... BUT I can't adjust the Recording level at all. I am not sure if this is an issue with the M-audio device, or garage band??? It is driving me crazy, since I just want to make some music and can't even hear what is being recorded. ???

Thanks, .... Yes to all of the above. I am wracking my brain & will call M-Audio tomorrow. Everything looks perfect on the interface & on garage band - but, even though the Fast track Pro shows up in my sound preferences & I can select it as the input & output source, etc., when I go to its window, even hooked up, it says no "device is not connected." Then it details that there are "no input controls" under sound in system preferences. I have two working usb cords & it does the same on either. I think this is the problem & have no idea how to fix it. I just want to plug it all in and record & have lost So much time . Hmmmmm???

Mac mini does not recognize M-Audio Fast Track Pro device.

I recently installed M-Audio Fast Track Pro with the latest driver for (10.9.2). I'm running the OSX mavericks 10.9.2. The installation succeed but once i connected the device and turn it on, my mac does not recognized it and it shows "device not connected" at the system preferences under the M-Audio fast track icon. i tried reinstalled the driver, tried the checking audio midi setup setting (which is still undetected) and tried installed it at my friend's pc (the device works fine).
Please help me.

See:
http://community.m-audio.com/m-audio/topics/os_x_mavericks_fast_track_pro_suppor t

I updated to OS X Mavericks and now trying to run Logic Pro X on a MacBook Pro mid-2009, using an M-Audio Axiom 49 and an M-Audio Fast Track Pro... Logic keeps telling me that Mac OS X MIDI Services are not available... How do I solve this problem?

I updated to OS X Mavericks and now trying to run Logic Pro X on a MacBook Pro mid-2009, using an M-Audio Axiom 49 and an M-Audio Fast Track Pro... Logic keeps telling me that Mac OS X MIDI Services are not available... How do I solve this problem?

I just checked to see if the update to OS X Yosemite 10.10.1 solved any of the issues outlined in my previous post, and to my dismay, nothing has changed -- all of the previous problems persist.
My iMac (8) -- it's renamed itself eight times since the recent troubleshoot with the Apple tech rep -- shows up as a shared device in Finder on my MacBook Pro, but when I click on it, I cannot establish a connection using "Connect As". So I've attempted to connect using the menu "Go/Connect to Server...", using both (alternately) the iMac's name and IP address, to no avail. I get a message which reads: "There was a problem connecting to the server 'Peter's iMac (8)'. This server may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again."
Here's what I know:
The server -- Peter's iMac (8) does exist;
The server -- Peter's iMac (8) is available at this time;
The server name -- Peter's iMac (8) -- is correct, as specified in the system sharing preferences;
The server IP address is correct, as specified in the system sharing preferences;
The network connection is active when I attempt to connect.
I'm convinced the problems stem directly from the OS X Yosemite update. None of this was ever remotely an issue in the previous OS X's -- any of them. This is maddening! What can be done? Apple?? Anyone???

Macbook Pro doesn't recognize my fast track pro c400

Hello I am using Fast track pro c400 from M-audio.
When I use the fast track pro c400 it works.
However, when I disconnect it from my Macbook Pro and reconnects it,
MIDI setting recognizes it again but this time with out any available input and output.
So when I use mainstage or garageband, it recognizes that there is 1 midi input but
when I go to setting it doesn't uses fast track pro's input, output instead, it uses built in I/O.
So i tried to reinstall my driver and when I did it, it worked again for few time and
same problem occured.

okay, I had connected my MBP to the base station and managed to restore the base station to factory settings. So, my MBP recognized the base station, although there's something weird about it.. you know how when you open the airport utility, on the left hand column, usually there should be a picture of your airport extreme with the name below it, right? Mine doesn't show any picture except the orange dot and my base station name.
In addition, my MBP airport is able to pick up my recently-made network, but unable to join the network. Again, when I opened the AirPort utility, it can't detect my airport extreme wirelessly.
I have tried every method that I can think of, but my MBP won't recognize the airport extreme anymore, wirelessly.
Please tell me what should I do?

M-Audio Fast Track Pro doesn't work with OS X Mavericks Garageband or MainStage 3

I used to be able to use MainStage 3 and Garageband with my M-Audio FastTrack Pro with no problem. Then, when I upgraded to OS X.9 Mavericks, it doesn't work. Avid (who now supports the FastTrack Pro) recently came out with an updated driver that supposedly upgrades for OS X.9 Mavericks (http://avid.force.com/pkb/articles/en_US/Download/Fast-Track-Pro-Drivers), but even after downloading/installing the driver and updating the device, I still can't get it to work with Garageband or Main Stage 3.
It seems that the software sees the M-Audio FastTrack Pro USB, I even see an audio signal in both MainStage 3 and Garageband for my guitar or microphone input, but there is no output sound from the FastTrack Pro to my PA system other than the analog sound (no sim amps or vocal effects work).
Anybody been able to solve this problem?

I had the same problem (Fast Track Pro + Mavericks 10.9.2 > no output sound).
After trying several combinations, I found out an non logical solution, but it did work
What I did:
1) Download the most recent driver update 1.9.4 (http://avid.force.com/pkb/articles/en_US/Download/Fast-Track-Pro-Drivers)
2) Uninstall Fast Track Pro Drive and restart computer
3) After restar, do NOT install again. Just go to the System Preferences/Sound and set Fast Track as your in/output port
Hope it helps!

BIG PROBLEM BETWEEN PREMIERE PRO CS6 and FAST TRACK PRO

Hi there...im running premiere pro cs6 on macbook pro 2010 with 8 gb of ram...im editing a project of hd material from a canon 5d..i got all the sound from an external recorder, all the sound is already syncronized... i need to do some cleaning on it....i got an USB fast track pro from M-audio that work well....
the problem is this : every time i have to send a clip to another aplication for the cleaning of the sound( audition with dynamic link or soundtrack pro exporting a .wav file) after a while (it can be a couple of minutes or more) i listene a clic on my headphones and the sound goes back to the speakers of the macbook pro, after that i must reconfigure again the audio hardware and audio output mapping again ( this happen almost with every clip and only between audition and premiere) anyway i started to use soundtrack pro to avoid this problem... but what is happening now is that many times after i listen the clic on the headphones or after im tryng to go back from one audio application to premiere, premiere freeze out or shhot down....
the poject is kind of big and restart premiere 3 or 4 times in an hour of job in my mac book pro its not what i call a productive hour oj job...
somebody have the same issue??
please let me know becouse im starting to get really mad...
anyway ill post also in the m- audio website to check it out over there
thanks in advance

Hu Simon...thanks for the answer but how i already writed in my post im on a macbook pro(internal audio card are out of the question)...
anyway are you suggesting that adobe doesnt work well with usb audio devices???
becouse for now i have to stick with it....
if somebody got a suggestion please let me know

Adobe Audition with M-Audio Fast Track Pro mic input

I must be missing a setting somewhere. I have two mics going into the M-Audio Fast Track Pro (XLR inputs). Mic 1 works fine but no input from Mic 2 although I have audio coming through my headsets when speaking into Mic 2 - it just doesn't register in Adobe Audition. I have switched mics and cables and all are fine. The issue is with Mic 2.
Again, Mic 1 is working fine and Mic 2 is picking up audio and feeding to my headphones but not to Adobe Audition. I have all the latest drivers installed.
I am on a Win7 (32bit) system. Microphones are Shure PG-42's (phantom powered condenser microphones).
I contacted M-Audio support and phone-verified that all Fast Track Pro settings were proper. Seems to be a setting or driver issue in Audition. I've spent hours trouble-shooting to no avail. In the meantime, I'm using a Y-splitter running both mics into Mic Input 1 on the Fast Track Pro which works fine but I really need seperate control over each microphone. I have interviews coming up soon and would like to find a resolution quickly. Can anyone help? Thanks!

Archie! Good stuff! I'm almost there...
I've got my Adobe Audition set up with the settings you gave me - everything is armed and good-to-go... but then...
When I hit record Tracks one and two look like they're recording but there is no level (no audio) going into the tracks.
If I go back to the Edit view and try to record the entire fills with green as if I'm filling it 100% with sound. This has never happened before.
I suspect I've got something hosed-up in my "Audio Hardware Setup" under the Edit section.
My selections for Audio Driver Setup are:
1) M-Audio USB ASIO
2) ASIOforALLv2
3) Audition 3.0 Windows Sound
If you could give me some direction as to the settings in "Audio Harware Setup" I feel I've almost got it.
Thanks!

FCE 4 with M-Audio Fast Track Pro

I have an M-Audio Fast Track Pro with a condenser mike using phantom power, connected via USB.
I have used that at length for voiceovers on iMovie '08 without any issues.
Now I'm making the transition to FCE 4, and when I select "Voiceovers" and then change the microphone from "Inbuilt" to "M-Audio Fast Track Pro", I get an immediate Kernel Panic.
Latest drivers for M-Audio FTP are installed (and they specify 10.5.2 compatibility.
Using 10.5.2 with all latest software updates on a 2.8Ghz 24" iMac.
Any ideas?
Many thanks.

Thanks Jonathan, yeah, me too (just starting out).
I must admit, I haven't investigated Soundtrack - though I wonder if the issue of Kernel Panic would be any different - I can try, at least. So, thanks for the suggestion - but I guess that the "Voiceover" facility in FCE is there for a reason.
By the way - my initial info was in error - the M-Audio driver specifies 10.5.1 not 10.5.2. All you OSX experts - would such an OS upgrade be likely to make a difference to a driver like that - or is that an impossible question?
Thanks again,
Greg

Soundproblem: Mac Book Pro with M-Audio Fast Track pro.

Powerbook: Mac Book pro 10.6.8., 2,66 Ghz, Intel Core i7, 4GB
Interface: M-Audio: Fast track Pro
Version 1.8.1.
I have a problem with the M-Audio Interface with the Mac-Pro via USB. It sounds as if the speaker is broken. The Powerbook works normal - via intern soundcard no problem. The Interface, too. I checked it with my Mac Pro (Mac Pro, 10.5.8, 2x 2,8 GHz Quad-Core Intel, 8GB Ram,) no problem!
Ger: Seit neuestem Krächzt und rauscht der Sound über das M-Audio Interface, als wären die Speaker durchgeknallt. Lief sonst immer ohne Probleme. Weiss nicht ob es an 10.6.8 oder dem M-Audio liegt? Der Rechner läuft sonst einwandfrei - interne Audio läuft tadellos. Das Interface genauso - auch meinem festen Rechner Mac Pro, 10.5.8, 2x 2,8 GHz Quad-Core Intel, 8GB Ram,

No problem, you need to select an audio track and select input monitoring if you want to hear something and of course recording (the first two square buttons in the track, marked I and R) and plug your headphones into the M-Audio otherwise you won't hear anything (as mentioned above) cause that is what the m-audio is for, it replaces your computer's sound card. And unless you set up some aggregate device your computer's sound card will not work...and (nearly forgot) if you plug in your guitar in one channel you need to select a mono audio track to record otherwise it will be only on one side.

M-audio fast track pro doesn't work anymore

Today I plugged in my M-Audio Fast Track Pro which worked fine few weeks before, but now it doesn't work anymore. It shows up everywhere fine but I can't play any music. The videos on Youtube can't be played at all when I have selected this soundcard as output. Same every other application like iTunes. I have reinstalled the drivers, rebooted my mac but nothing helped so far. Does anyone know how to solve this problem? Thanks.

I had the same problem (Fast Track Pro + Mavericks 10.9.2 > no output sound).
After trying several combinations, I found out an non logical solution, but it did work
What I did:
1) Download the most recent driver update 1.9.4 (http://avid.force.com/pkb/articles/en_US/Download/Fast-Track-Pro-Drivers)
2) Uninstall Fast Track Pro Drive and restart computer
3) After restar, do NOT install again. Just go to the System Preferences/Sound and set Fast Track as your in/output port
Hope it helps!

Problems with M-Audio Fast Track Pro interface & FCP\Logic

Hi gang,
I'm using a small M-Audio (Fast Track Pro) external interface to pump sound from the Mac to my speakers (and to input live sound).
I use it a lot with Logic Audio. No problems.
With FCP it does odd things on occasion. It suddenly starts to feedback, creating a horrendous din. Then I have to shut down FCP, replug the USB connect, even restart the computer to get it working normally again. And sometimes it just goes dead ... NO sound to the speakers.
Anybody come across this kind of thing? Any suggestions?
Ben

I'm seeing similar things in Logic Express 8.0.1. I didn't experienced this with Logic Express 8.0, though I only used it a handful of times before getting the update.
Using the Fast Track Pro as an output device seems to work fine, but when I create an audio track and monitor my bass the audio tends to drop out after between 5 to 30 seconds; using inserts on the track seems to make it fail faster. Logic looks like its still monitoring, going by the monitor level, for a little longer, then it gets "stuck". If I record the audio track while its stuck and then play back through built-in audio its a clip of the bass, about a half a second or so long, repeating over and over again making it seem like the Fast Track Pro is, itself, stuck.
While it's doing all this Logic and the whole OS have a tendency to lock up for up to probably half a minute, sometimes longer.

Problem using Fast track pro... (win7/64)

Hi there, I just bought Audition CC. I'm running Win7/64 and have a Fast track pro using USB.
My windows seems to recognize the hardware without a problem...
But when I try ti find the hardware in Audition CC it's not found...
I finally got it running with an ASIO driver but that's not the way it should be , isn't it? And by the way, the playback using the ASIO-driver sounds awful, full of glitches and noise etc.
I remember using Audition and the same hardware without a problem. Now I did a Win7 re-install and Audition can't find my hardware anymore. Hope someone can help.

Thanks for the reply,
there seem to be extra options, but there not when you click them...
MME, WASAPI...... No luck at all.

Fast Track Pro, USB, showing as a storage device, not audio

Similar Messages

Maybe you are looking for