Fatal error when I open Itunes and Quick time.

EventType : BEX P1 : QuickTimePlayer.exe P2 : 7.4.5.67 P3 : 47edaedf
P4 : QuickTimePlayer.exe P5 : 7.4.5.67 P6 : 47edaedf P7 : 0000130d
P8 : c0000409 P9 : 00000000
cant uninstall quick time gives fatal error, stems from same error when I try to open Itunes.

Checking on a possible cause of similar symptoms. Have you ever install an ACE or K-Lite Mega Codec pack, a copy of QT Alternative or QT Lite, or a copy of Storm Codec on that PC?
(Checking on this because those programs, and some others, can install "QuickTime" componentry on the PC that can break a copy of the QuickTime on the PC, and as a consequence break iTunes. The "fatal error" when attempting to uninstall QuickTime is often a symptom of that, too.)

Similar Messages

  • I installed itunes and quick time  but when I try to open itunes I get a message that reads "quicktime failed to initialize (error -2096)"

    I installed itunes and quick time  but when I try to open itunes I get a message that reads "quicktime failed to initialize (error -2096).  I have removed both itunes and quicktime from my computer and re-installed them and I still get the same message.  What do I do to get itunes to work?

    That one is often a compatibility mode problem. Try the following document, only be sure that none of the boxes in the compatibility mode tab are checked (not just the compatibility mode box itself):
    iTunes for Windows: How to turn off Compatibility Mode

  • I cant open itunes cause quick time failed to initialize (error - 2096)

    i cant open itunes cause quick time failed to initialize (error - 2096)

    hmmmm.
    doublechecking something before proceeding ... are any boxes ticked in the Compatibility tab for your QuickTime?
    (i've seen that message produced when some of the Display Settings boxes in there are ticked, not just the compatibility mode one.)

  • When I open itunes and try to log out it freezes

    when I open itunes and try to log out it freezes.

    Close your iTunes,
    Go to command Prompt -
    (Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
    (Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
    In the "Command Prompt" screen, type in
    netsh winsock reset
    Hit "ENTER" key
    Restart your computer.
    If you do get a prompt after restart windows to remap LSP, just click NO.
    Now launch your iTunes and see if it is working now.
    If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
    iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
    http://support.apple.com/kb/TS4123?viewlocale=en_US

  • I just recently did a reinstall on my mac, i tried to open itunes, but there is an error message that says itunes requires quick time 7.5.5 or later, i have tried to update quicktime, but cannot.  please help :)

    i just recently did a reinstall on my mac, i tried to open itunes, but there is an error message that says itunes requires quick time 7.5.5 or later, i have tried to update quicktime, but cannot.  please help

    Just FYI
    QuickTime 7.7 for Leopard - http://support.apple.com/kb/dl761
    http://support.apple.com/kb/DL27 <-- Quicktime 7.5.5

  • ITunes and Quick Time upgrade 9.0.2 error downloading and installing

    Hi,
    This morning I recived notification that there is a new update for iTunes and Quick Time. While downloading and installing this upgrade 9.0.2, I received the following error:
    An error occurred during the installation of assembly "Microsoft.VC80.CRT, version= "8.0.50727.4053" type="win32", publicKey Token="1fc8b3b9a1e18e3b", process or Architecture="x86"', please refer to Help and Support for more information. HRESULT: 0x800736B3.
    What the heck does that mean???

    I received the same error and spent roughly an hour and a half troubleshooting with the Apple Customer Support before I was told that it was a Windows or Lenovo manufacturer issue -- something to do with a registry key -- and that this was outside the realm of Apple Customer Support.
    If you are able to resolve it, I would be interested in knowing how.

  • When i enter time machine with mail open can see past mail .  when i open iPhoto and enter time machine can not see past photos  have i got a problem  ????

    when i enter time machine with mail open can see past mail .  when i open iPhoto and enter time machine can not see past photos  have i got a problem  ????

    iPhoto '11: Restoring from Time Machine with iPhoto '11 (9.2 or later) and OS X Lion 10.7.2 (or later)

  • No Disk in the Drive Error When I open iTunes

    When I open iTunes I get the error No Disk in the Drive. I can click on Cancel several times and iTunes will open, but this is very annoying.
    Has anyone had this problem, and fixed it?

    I am having a similar problem, but it has nothing to do with a card. I installed my iTunes successfully about five months ago and everything was fine. Then, at some point, I started getting that same error, which I just skip over about twenty times before it works. Some strange things did occur after this...
    1) I had a number of files that were saved in one of iTunes folder that suddenly were "erased". These songs areon my iPod but are not available in my libarary.
    2) Some songs that I have downloaded using LimeWire, and are in a separate shared folder are intermittantly showing up with an ! in my library, saying the file can't be found. I'll locate it with the prompt, and the ! will disappear...only to appear with a later launch. This will happen to different songs at different times with each launch, but from within that folder.
    Any help out there? I'm tempted to uninstall the whole shebang and reinstall all over again.

  • TS1424 I get an error when I open itunes.

    When I open Itunes, a message appears which states "The registry settings used by iTunes drivers used for importing and exporting cd/dvd is missing.  Please re-install iTunes".  I have deleted and re-installed itunes twice but the error remains.  In addition, when I plug in my iPhone, iTunes no longer opens automatically, will not sync and doesn't appear to  be recognized by iTunes.  Please help.  Very frustrated!!

    When I open Itunes, a message appears which states "The registry settings used by iTunes drivers used for importing and exporting cd/dvd is missing.  Please re-install iTunes".  I have deleted and re-installed itunes twice but the error remains.  In addition, when I plug in my iPhone, iTunes no longer opens automatically, will not sync and doesn't appear to  be recognized by iTunes.  Please help.  Very frustrated!!

  • Runtime error when i open iTunes

    basically, i open iTunes, and get this error....i hit OK and it terminates the program...
    here's the error..
    (in the title bar)
    "Microsoft Visual C++ Runtime Library"
    "Runtime Error!
    Program: c:/program files/iTunes/iTunes.exe
    This application has requested the Runtime to terminate it in an unusual way. Please contact the application's support team for more information."
    i hit OK and it exits iTunes

    http://discussions.apple.com/thread.jspa?threadID=1016237

  • My iphone4 will not sync. when I open itunes and task mgr. there is NO space left on computer., my iphone4 will not sync. when I open itunes and task mgr. there is NO space left on computer.

    iphone4 will not sync.  I have updated windows-vista and iphone and cleaned out temp file on computer, also disconnected the mouse.
    When I open itunes -I also open task mgr and computer goes to 100% usage!!!!!!
    I AM SO UPSET!!!! I have been working on this problem for three days now!!!!!!!

    I'm doing my own reply, so others will benefit!!!!!!
    I read a fix and applied it as follows and my sync went on beautifully.
    Go to Start, Go to Programs, Go Accessories, RIGHT click on Command Prompt. 
    Choose RUN AS ADMINISTRATOR.
    Type---    Netsh windsock reset   ----then press enter and restart your computer.
    IT WORKED WHEN I RAN ITUNES TO SYNC.  THANK GOODNESS!!! I DON'T REMEMBER WHO POSTED THIS FIX -BUT I SURE DO THANK YOU!!!

  • What do you do when you open iTunes and it doesn't respond?

    Hi. What do you do when you open iTunes, but doesn't respond, eventhough you forcequit and open again?

    You can't do much else besides pull the plug. If it causes further problems you should be able to restore as below:
    Get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
    Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
    Connect the micro USB cable to the Apple TV and to your computer.
    Reconnect the power cable (only for Apple TV 3)
    Open iTunes.
    Select your Apple TV in the Devices list, and then click Restore.
    On the other hand you may be able to simply start the update again. If however the update continues to fail, you should try the restore routine above.

  • When I open itunes and try to go to store it does not open trouble shooting sayes I am not connected to internet. I am connected...

    When I open itunes the store will not open nor will it let me sign in trouble shooting says I am not connected to internet ... I am connected.

    This is the appropriate behavior.. Most email programs (browsers too) store attachments (or files) in a cache area. You then need to do a save as to more them to a different location. The plug-in is finding the pdf in the location determined by the email program, so that is the last place the plug-in used. It doesn’t have a different location to use.

  • -42110 message of error when I open itunes

    When I open itunes I have always this message : -42110 no other problem.

    If your iTunes is up to date, remove the SC Info folder.

  • Help to install iTunes and Quick Time please!

    I really hope you can help me. I have been working my way through this forum for around 5 hours today. I have tried a number of your suggestions and have made some progress.
    - My iTunes hasn't been working for some time. I tried to uninstall it and reinstall a fresh version but it wouldn't uninstall.
    - So following forum advice, I downloaded and ran Windows Install Clean Up and also did a manual deletion exercise. This left a few odd files that wouldn't delete.
    - I have downloaded iTunes 8.2 but it won't install. I get an error message: "error writing to file: c:\programfiles\commonfiles\apple\mobile device support\syncservices\schemas\calendars.syncschema\contents\windows\calendars.ex e Verify that you have access to that directory" and eventually I get a message telling me that iTunes needs Quick Time.
    - I also downloaded the stand alone version of Quick Time. When trying to install it I get the error message "error writing to file:c:\programfiles\quicktime\pictureviewer.resources\ko.1proj\pictureviewerlo calized.dll Verify that you have access to that directory"
    - I can confirm that I am the only user of this computer and I have administrator rights.
    - I have installed the latest Microsoft updates.
    - I have restarted my computer about 3 times, after each major thing I've tried.
    Totally Stuck Now!
    I did read a suggestion about using a Microsoft fix but it involves going into the registry and I don't have the confidence to do that, I don't really know what I'm doing at all, I'm just following my nose!
    When my computer starts up CheckDisk says "correcting error in index $0 16208" and after correcting and sorting it says "an unspecified error occurred".
    Please help!!

    It sounds as though the file referred to in the error message is corrupt and Windows cannot read it.
    Try running a disk check. If it finds and fixes errors, try reininstalling. If not it it doesn't work, go on to the next step.
    Try renaming c:\programfiles\commonfiles\apple\mobile device support\syncservices\schemas\calendars.syncschema\contents\windows\calendars.ex e as ...calendars.old.
    If Windows will not allow that, then rename the containing folder.
    This should allow the install to proceed as it will not see the corrupt file.

Maybe you are looking for

  • IOS 4.2.1 auto-correction bug in gmail web interface

    Seems to be a bug in 4.2.1, relating to auto-correction of spelling errors within the gmail web interface (i.e. within safari)... Whenever I'm typing, if I make a spelling error for which auto-correction suggests an alternative, attempting to cancel

  • Help with a group query

    I have the following table EX_ID EX_NAME EX_SURNAME EX_FLAG 1 TOM JONES Y 1 JIM SLIM N 1 BO SELECTA Y 2 AIRES BEARS N 2 JIM DAVIES Y 3 PAUL BALL N 3 YOU KNOW N I need to create a query that only displays one of the ex_id's, it doesn't matter which on

  • Two database in same machine

    Hai I want to create two database in same machine. I searched in google but no use. Is it possible in oracle 9i r2? If so,Anybody please help on that.

  • IMac won't recognize 2nd installation disc for Creative Suite 5.5 Prod Premium

    Can someone help me? I bought Adobe Creative Suites 5.5 ProductionPremuim and I'm having trouble. I entered the serial number and product code and all that. It starts to install, and the first Application 1 disc installs just fine, but when it spits

  • Empty contacts with the new version of pc suite

    Hi, I have a nokia 6111 connected to my pc with a usb cable. When I go to my contacts with the nokia phone browser, the list is empty. It works well with my old version of pc suite 6.82 but since I'm upgraded it to the 6.83.14.1, the list is empty. I