Fax and Voice use same DID - SIP/CUBE

Is there any good way to have inbound Fax and Voice calls use the same DID?
I know there used to be a Fax Onramp TCL script, but I thought that was for TDM circuits (T1-PRI).
In this scenario, the PSTN comes from a SIP provider to a CUBE router. The provider does support T.38.
Call flow is: Remote Fax machine -> PSTN -> SIP Provider -> CUBE ->SIP -> CUCM (or Fax server.)
Ideally, I would like to send Fax calls directly to a 3rd party Fax server without going through CallManager (using dial-peers).
I'm hoping there is some secret SDP message that says "This is a Fax call, route me to the Fax server".
Thanks, Randy

Hi Stephan,
there are several timeouts and timings on voice ports which you can try out to "speed up" your disconnect but from my experience fax machines have an internal timing they need to get ready again - for example it needs often ~30sec to make a second ingoing fax after receiving the first one. For outgoing faxes the machine has usually a buffer where it stores the pages till the line is ready again. So it depends on the type & brand of fax machine you use, doesn't it?
Notice that some timeouts don't work since you control them with UCM (eg. ringing timeout => should be no answer config on line configuration)
show voice port 2/0:
Initial Time Out is set to 2 s
Interdigit Time Out is set to 10 s
Call Disconnect Time Out is set to 60 s
Supervisory Disconnect Time Out is set to 750 ms
Ringing Time Out is set to infinity
Wait Release Time Out is set to 30 s
Hookflash-in Timing is set to max=1000 ms, min=150 ms
Hookflash-out Timing is set to 400 ms
Furthermore I would suggest you to use actual 12.4(24)T release since i hade several problems with the 12.4(25c).
Regards,
Christoph

Similar Messages

  • My brother ipad was linked with old apple id and he forgot his id and never use same email.the problem now his mini ipad ask him for this id to open (activate ipad) what we can do ?

    my brother ipad was linked with old apple id and he forgot his id and never use same email.the problem now his mini ipad ask him for this id to open (activate ipad) what we can do ?

    He remember the id name and password but he can't enter we don't now if the password is wrong or the id was  lock . I have the all thing for the ipad such as his box . I now this is security thing but you could help me.

  • Have old MacBook Pro running tiger 10.4 want to save date to external hard drive and buy newer MacBook and still use same drive. Any suggestions, most  WD drives say nothing about os tiger 10.4.

    Have old MacBook Pro running tiger 10.4 want to save date to external hard drive and buy newer MacBook and still use same drive. Any suggestions, most  WD drives say nothing about os tiger 10.4. The OS compatibility  is much newer on the data.  Totally confused. Not a computer person.

    I haven't checked reviews recently but there's a difference between bare drives and drives with enclosures.  Western Digital made some of the most reliable drives last time I checked, though the enclosures weren't all that great.  It is convenient to get both in one package but I usually buy a highly rated enclosure and then put a highly rated drive in it myself.  OWC sells some good enclosures but if they put a so-so drive inside of it then the package is only as good as its weakest component.  If you get a package from them, ask them what drive is inside (some vendors have no idea what's inside  -  went to an Apple Store recently and they couldn't tell me what was inside some of their Apple brand enclosures).  My first thought if buying a new drive would be to buy a OWC enclosure with a WD drive, but chek around because I may be out of date.
    10 years ago Seagate was one of the best drives. Now they rate poorly in reviews.

  • Load Text and Attribute using same DataSource

    Hi,
    Is it possible to load text and attributes using same datasource? If yes than how can this be done?
    Thank you,
    CD

    Yes you are right in that case it will be an attribute , and in the report show it as display attribute. If you want to apply the text at Infoobject level,
    (1) In the change mode of Iinfoobject , check both with Master data and Text boxes , in the Master data /text tab
    (2) Make Flexible or direct update
    (3) Create 2 Infopackages one loading from ATTR data source and the other from TEXT data source respectively.
    hope it helps,

  • Fax use G711 and voice use G729

    I am going to have 2821 connecting to PBX T1 for about 10 sites. GK is used to manage the call routing and bandwidth. The codec we choose is G729. Question is: can we meantime use G711 for the fax even H323 dialpeer is G729? I know G711 passthrough is much better. Fax is on the PBX too.

    Here is a rather old document (but still mostly valid) which says fax relay is the preferred method.
    http://www.cisco.com/univercd/cc/td/doc/product/voice/c_access/fxmdmnt.htm
    This is a good document that will help you understand the issues encountered with faxing over IP.
    http://www.cisco.com/en/US/tech/tk652/tk777/technologies_tech_note09186a0080114565.shtml
    The right answer will depend upon the specific requirements in your network. In my experience, faxes and modems are an area that can be challenging, and that may require trial and error to get it right.
    As an example, we decided to use fax relay everwhere (some low speed WAN links don't have the bandwidth for upspeed), but ran into a very isolated problem with PSTN faxes between our Right Fax server and an internal fax board in a AS400 server at another company. All faxes everywhere else worked great, but this would always fail. Switching it to fax passthrough was the fix, so we now use fax relay for all faxing, except for RightFax to and from the PSTN, which is passthrough.
    Please rate helpful posts.
    Dave

  • Setting up fax and voicemail on same phone line.

    I have one phone line with voicemail and fax.  How do I set up the fax so voicemail doesn't pick up my faxes and the fax doesn't pick up my voicemail messages?  I have the fax and phone going through a splitter.  I just discontinued my separate phone line I used for faxing and internet and want to use a single phone line for everything.  Thanks in advance for any suggestions.  Auntalee

    If you have Verizon Home Voicemail (the kind you access by dialing a phone number i.e. no answering machine) I can't see how it would work. 
    Some fax machines can answer the phone listen for the fax tones and if it doesn't hear them it rings another phone or answering machine connected to it.
    It comes down to something has to answer the phone, figure out what kind of call it is a route it to either a answering machine or a fax machine.
    The only other way to do it with one line and Verizon voice mail is to get something called Distinctive Ringing service (if its available for Fios).  You get another phone number but not another physical line.  The one phone line rings differently for each number.  The fax machine must then have the distinctive ring feature and be setup to only answer it's ring.  The other ring it ignores which means VM will pick it up.
    Good luck

  • Running iTunes on XP and OSX using same music folder?

    Hi,
    I'm just starting to use OSX and XP in almost equal amounts after using XP on my MBP almost exclusively for over a year. The big difficulty at the moment is with the fact that my music is all on my XP partition (NTFS) and therefore not set up under OSX in iTunes.
    I was wondering if anyone has any experience setting up iTunes under both OS'es to point to the same music? Should I set up NTFS3G and just use iTunes under OSX as normal? Or if that is too risky, should I just set up iTunes in OSX to point to the music in read-only mode?
    Any help with this much appreciated, as I really do not want to screw up my music collection, which at the moment stretches into the 50GB+ range.

    Well as a user similar to you, i store all my music in OSX partition and iTunes point to the same music directory in both OSes. Of course, for Windows i use MacDrive. So far no problems occured for me. But as an advice just allow one instance of iTunes (Windows version in my case) to organize music folder, otherwise sometimes it messes things up.
    I do not think it will create a problem in your case. Of course the safest method is to use an external disk with FAT partition.

  • Fax and voice solution technical details!

    can any body send me the links or details in the Oracle Colloboraion suit OCS explanation about the How to Fax and technical detail about that .It would be nice if I got the general and both technical detail VOICE and FAX solution of OCS?
    Thanks in Advance !

    Documentation for Voice and FAX are available through the link on the top called "Documentation". Just follow the link to Collaboration Suite Documentation.
    Please let me know if you are looking for anything further and beyond this.

  • Hp Fax and voice calls mixed up

    I have one phone which runs two lines (fax and calls) with two separate numbers, this line runs to the hp printer into "line 1" and the fax is currently set to the correct fax number and is programmed to pick up the fax after two rings. The problem is that when I receive a phone call, the call is being picked up by the fax after two rings and the fax machine is not recieving or sending faxes..... Hope that makes sense

    Hi @Chrisdel83 
    It sounds like, you have 1 phone line, with 2 numbers, thus you are using distinctive ring. From your description, it seems to me the printer is not setup to detect only the distinctive rink, instead it is picking up every ring pattern. Please take a look at the following document to help resolve the issue; Using the Distinctive Ring Feature.
    Please let me know if this resolves the issue, or if you require additional assistance, thanks.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • Remove pipe delimited and  quotes USING SAME ctL FILE

    i need to remove quotes and delimited(|) using control file in SQL LOADER. I am able to remove delimited but not able to " "(quotes).Can any one help me?
    "1"|"tom "|"newyork"
    LOAD DATA
    INSERT
    INTO TABLE temp_table
    FIELDS TERMINATED BY "|"
    TRAILING NULLCOLS
    ( id,
    name,
    city
    Thanks in Advance!!!!!!!!!!!!!!!!!!!!!!!!
    Edited by: tom on Apr 23, 2012 3:50 PM

    Use optionally enclosed by '"':
    Control file:
    {code}
    LOAD DATA
    INFILE *
    INSERT
    INTO TABLE TBL
    FIELDS TERMINATED BY '|'
    optionally enclosed by '"'
    ( id,
    name,
    city
    BEGINDATA
    "1"|"tom "|"newyork"
    Load:SQL> create table tbl(id number,name varchar2(10),city varchar2(10));
    Table created.
    SQL> host sqlldr scott/tiger control=c:\temp\tbl1.ctl log=c:\temp\tbl1.log
    SQL> select * from tbl
    2 /
    ID NAME CITY
    1 tom newyork
    SQL>
    SY.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

  • My Iphone and Ipod are all ready set up but I want to change my Apple ID for each each user to be able to have their own iCloud backup.  So How do I change it once its set up and still use same Itunes password?

    Ok we have a 4 users and I want them all to have the same Itunes account to purchase from, but I want them all to be alble to have thier own Apple ID to be able to keep contacts and things serperate.  How can I change the Apple ID on our devices since they are already set up?

    Settings-icloud-scroll to the bottom, select delete, if you want to keep the content select keep, otherwise it'll remove it. Then once it is done add the account information for the account you want on that phone.  Your apple ID in settings-store will remain the same and each device can still purchase/use content from that account.

  • Maintaining Multiple Vendor Phone Fax and Email using IDOC

    Hello Guru's,
    I have a requirement where I must be able to maintain multiple phone and fax entries for all of our vendors.  Is there a standard segment in IDOC CREMAS05 that will allow for this maintenance?  Or will I have to use a separate BAPI / FM?  I think there must be a standard way for doing this.
    As of now it appears the CREMAS05 IDOC only supports the ability to maintain one phone/fax or email address at a time, which is in the LFA1 table, and not at the address table level (ADR2, ADRC, ADRT, etc.).
    This is for an R/3 System running on EHP5.
    Thanks,
    Kohl Kemp
    Edited by: Kohl Kemp on Jul 14, 2011 3:16 PM

    I've never done this natively in CUC.  Here's a guide that covers how to do it with the Fax server integration if that helps:
    http://docwiki.cisco.com/wiki/Configuring_Fax_Detection_%28Single-Number_Voice_and_Fax%29_with_Cisco_Unity_Connection

  • Fax picks up fax AND voice calls

    I thought when you have an external modem fax set up, the computer is supposed to tell if it's a voice call or a fax call. For some reason, the fax keeps picking up on ALL calls on the first ring (or any ring # I set it for) and no voice calls are getting past the fax now. Is there anything I can change to fix this?
    I have a cable VOIP phone system, could this be interfering? I would assume that would work even more stably though, since it's all digital.
    I'm at a loss.

    I don't think there is any way for your computer to know it's NOT a fax call..... until after it's been answered...

  • Can I install Lightroom 5 on both my desktop and laptop using same license?

    I work both at school on my desktop iMac and on my MacBook Pro laptop at home.  Am I able to install the program on both machines using the same license key?

    Yes you can, provided you're the only person using each copy.

  • Iis and jboss using same context root

    I want to be able to run two instances of jboss, two iis web sites and have them both use the same context root "/". The will be used for different sites www.site1.com and www.site2.com.
    I have iis serving up my jsp from jetty using the apache redirector fine for one server. I can also get it running for two iis web servers and two jboss servers on different ip addresses (all on the same machine). But, I am unable to use the same context root in the uiworker.properties file. The only way they will serve up the pages separately is if thee workers are assigned different context roots. I want to use "/" for the context root on both sites in both jboss instances.
    Is there a way to do this?

    http://www.itshastra.com/know_bank/IIS_Jboss.pdf

Maybe you are looking for