FCE log and transfer Q

Hey,
So I was taking some video shots out on the boat with my Panasonic TS1 recording if AVCHD format (.mts). When I plugged the camera into my comp and used the log and transfer in FCE the videos ended up way sped up, like maybe 2X speed. When I view the .mts files the video is normal speed. Why is it doing this and how can I make it normal? I want the transfered videos to be the right speed before editing because I use the .mov files to view/send to people.
Also does this process give the videos the best possible quality or can I change a setting to boost quality?
Finally, should I be going about this another way with Toast or something, and what settings would be ideal?
Thanks a lot,
Alex

Your still camera is using AVCHD Lite which is not an FCE standard at this point.See the link below:
http://discussions.apple.com/thread.jspa?messageID=9686343&#9686343
Al

Similar Messages

FCE log and transfer goes from avchd to prores which then requires rendering down to AIC -- what's with that??

Someone gave me a Sony camera (HDR-CX160) to try to get some footage out of...
Log and Transfer worked fine, but the resulting files in Capture Scratch are ProRes. When I add them to the timeline, it requires rendering (Lengthy rendering), presumably to convert to AIC.
How can I get Log and Tranfer to go straight to AIC??

Do you have FCS or FCP-X installed on the same computer? Also, the HDR-CX160 is capable of shooting 60p which is not Log and Tansfer, or FCE compatible. You need to make sure the camera is recording 1080i60.
Anyway, try this:
Open Log and Transfer, and click on the gear in the upper/center portion of the pane to select preferences:
When the preference open, navigate to AVCHD Plugin and choose Apple Intermediate Codec.
Then try importing your files.
MtD

FCE Log and Transfer with Canon Vixia HF11

I've recently upgraded FCE. Before the upgrade I had no problems with log and transfer. I have changed absolutely nothing on my camera or computer other than the upgrade. Now when I try to log and transfer the files are in the window but I get a red icon that indicates they won't download. Are there simple fixes here? I don't understand most of the terminology used on these sites. I just know that it worked before I upgraded and doesn't work now. Thanks

Go to the Log and Trnasfer window and find the Settings icon (a small gear wheel).
Change the audio from Martix to Plain Stereo and try again.
Al

Is there a way to import clips from AVCHD folders I have copied from my camcorder to my hard disk? With FCE I could import these clips using log and transfer.

In FCP-X is there a way to import AVCHD clips from an AVCHD file folder I have copied from my Canon hard disk camcorder to my iMac hard disk? With FCE I used log and transfer with no problem; but, FCP-X doesn't import them. It will import AIC files that have been created in FCE from the original AVCHD files. If FCP-X will not import these files directly from the copied AVCHD folder, is there a workaround using other software to convert the files? For example, Compressor? (Canon does not provide any AVCHD conversion software for OSX).

Hi jphil and Tom
I have exactly the same problem but the answer you (Tom) provided did not help in my case. Trying to "Import ->From Camera" and pointing to the AVCHD folder yields the error message: "(Folder) contains unsupported files or has invalid directory structure."
Folder structure is
AVCHD
     BDMV
          CLIPINF
               .CPI files
          Index.bdm
          Movieobj.bdm
          PLAYLIST
               .MPL file
          STREAM
               .MTS files
AVF_INFO
     3 files (.bnp, .inp, .int)
DCIM
     101MSDCF
          empty
     MODELCFG.IND (file)
My question is: Is that not a "camera archive" of the type you talked about in the thread? Is it on principle not possible to import the files in that format/directory structure? If not, since the shots were not taken by myself, what should I ask the guy who shot the movies to give me to be able to work with them in FC?
I work with a brand new Final Cut Pro X 10.0.4 (still very clumsy with it) on an iMac 11,3 with MacOS 10.6.8.
I downloaded the latest version of codec updates from the Apple support site but no difference.
Thank you in advance
Giorgio
Freiburg, Germany

Log and transfer footage from Panasonic GH1 into FCE

I have already read the few threads discussing importing AVCHD video from the Panasonic GH1 camera into FCE. I was expecting that the 1080x24 (wrapped in 60i) would import OK but the 720x60p would not. However, so far, I have had both formats import using the log and transfer just fine. These have been only short clips roughly a minute or less in length but no sign of FCE crashing when importing the 60p footage.
So, is this considered normal or has something in the most recent OSX updates fixed this FCE capability?

The program is usually able to ingest 24p and 60p footage fine, but upon exporting it will be conformed to the frame rate of your sequence. Since FCE doesn't support custom sequences all exported movies are either in 29.97fps or 25fps. Problems also sometimes arise where the program interprets your footage as 29.97fps instead of what it actually is, causing the audio to drift a bit as well.
Better to stick to what the program supports: 50i/25p and 60i/30p. If you need the functionality of 24p or 60p you should upgrade to Final Cut Pro.

Importing a lot of video clips from a Sony camera to FCE; during the Log and Transfer process, is there a way to add multiple clips to the browser instead of one at a time?

Importing a lot of video clips from a Sony camera to FCE; during the Log and Transfer process, is there a way to add multiple clips to the browser instead of one at a time?

Select one and click cmd-A which selects them all.
Then click the import button if it hasn't started already.

Canon HF20 - Issue w/ Log and Transfer in FCE

I just bought Final Cut Express 4, How do you know if you have the most up to date version? How do you upgrade?
The Video shows up, but it WILL NOT "log and transfer" I have tried to drag it down and drop it in and it acts like it will process it, but it will say 1 Clip Queued - Idle, The status then shows up as a Red Octagon with an exclamation mark.
I will do anything for answers,
the only way I can get video into fce so far is by uploading it to imovie then importing it in...
ANY Help- PLEASE!!!

Perian = I do not have that downloaded. Should I?
The only way I could get video into FCE is through importing it in. When the video plays in the canvas, the video is huge and I only get a portion of the screen....It looks really zoomed in. I'll gladly paypal you anything if you can help me through these beginer issues.

Hey, I have Final Cut Express 4.0.1 and a JVC everio camera, whenever i try to import my files to FCE via "Log and transfer", it just doesn't do anything, as if FCE doesn't know the camera is there, please help !

Hey,
I have Final Cut Express 4.0.1 and a JVC everio camera.
Whenever i try to import my files to FCE via "Log and transfer", it just doesn't do anything, as if FCE doesn't know the camera is there,
please help !

FCE 4.0.1 can only capture DV/HDV which is produced by cameras using Mini-DV TAPES and cameras shooting AVCHD which is a high definition format.
If your camera shoots standard definition on Memory Cards, DVDs or Hard Drives it will not work in FCE.
What is your camera's exact model name and number?

FCE keeps crashing when I try to log and transfer

Help! The FCE 4.0 program keeps crashing when I attempt to log and transfer media. The 30fps clips are ok but the 1080/60 clips just freeze, a green hue appears, then the whole program just unexpectedly quits.
Wondering what i'm doing wrong? is the new updated FCE 4.0 not robust enough for 1080/60? or is my computer too weak or old? (iMac 2008).
Appreciate any help. I'm desperate...
Dan

Thank you again for the response, Tom W. I'll keep that in mind. From now on, it's 30fps or 24fps until I upgrade to FCP.
If it's not too much to ask. I'm stuck coz I am having difficulty saving the clips from the SD card to an External HD. I don't know if I should convert it to something else or just straight drag n drop the clips from SD card to a folder in the external. Any input would be greatly appreciated.

Cant import using Log and Transfer to FCE 4.0.1 from Panasonic DMC-TZ10

Does anyone know if/how I can import into FCE 4.0.1 using Log and Transfer? I use Log and Transfer with my Sony HDR XR200VE Video Camera but when I try this with the Panasonic DMC-TZ10 I can play the clips in the Log and Transfer Clip viewer however they don't import after I add them to the queue. It just gives me an ! icon and gives up.
I guess I need to know if there is a combination of camera settings and Codecs I can choose that will allow me to successfully import into FCE 4.0.1 using Log and Transfer.
The settings I can choose on the DMC-TZ10 camera are the Rec Mode (Either AVCHD Lite (GPS Rec), AVCHD Lite, or Motion JPEG) and the Rec Quality SH, H or L).
iPhoto 09 and iMovie 09 will automatically import video from this camera if I choose Motion JPEG and H on the DMC-TZ10

Log and transfer only supports AVCHD. It does not support AVCHD Lite, nor will it work with Motion JPEG media. You could use third party software to convert it, or iMovie and then export a QuickTime movie from there in the correct codec and format.

Log and Transfer w/ Canon HF20 FCE

I have the canon hf20 It worked perfect with imovie 09,
I just bought Final Cut Express, I can't get it to log and transfer for the life of me. Is final Cut Express 4 and Canon HF20 compatible?
How do you import video / log and transfer?
I can't find the answer anywhere!

I have a Canon HF S100 and am also running into the problem. It will bring my clips up but when I drag them over after setting up an in and out it says there is no data.

Log and Transfer from network volume causes FCE to crash

I have copied the contents of an SD taken from a Canon HF100 to a volume mounted on my network. Originally, this was only intended as a means of back-up but I found I needed to capture additional footage so I navigated to the volume in the Log and Transfer window and began ingesting clips. The first clip worked just fine but the Log and Transfer window hung about 1/3 of the way into the second. I can preview all the clips in the L&T window but the program crashes when I ingest. The clips vary in length but that does not seem to be a factor in the problem. I tried this on both a Tiger machine and a Snow Leopard machine with the same results. iMovie was able to ingest the footage over the network without the same problem. Ultimately I moved the footage back to a local drive and transferred from there without any issues at all. This issue involves a great many layers but if anyone has had a similar issue I would be interested to hear.

We just had a longish discussion about networks and capture/editing.
Bottom line:
The slowest component in the network stream is the speed the network runs and not necessarily both ways. Check the specs of your specific gear.
I suspect this to be your problem. Here's a short extract.
Networking Limitations:
* When accessing the WD My Book World hard drives remotely using MioNet/WD Anywhere Access, please be aware that the transfer rate will be limited by whatever the slowest connection is. For instance, upstream rates for home users is typically no more than 512Kbps, even if the downstream rate is 4Gbps.
* If there is heavy I/O load put on the network and WD My Book World hard drive, it is recommended that a static IP address be used rather than DHCP.
Another thing of note was to use CAT 6 cable.
Al

Working with AVCHD: Log and Transfer FAQs

Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in the topic below. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information below at your own discretion.
Working with AVCHD: Log and Transfer FAQs
Log and Transfer was introduced to the product chain in Final Cut Express 4, and is the program's process for ingesting files in the AVCHD format utilizing MPEG-4 AVC/H.264 video coding and either Dolby AC-3 or uncompressed linear PCM audio coding. The most frequently observed problems relating to the Log and Transfer process are generally quite easily addressed.
What should I know before attempting to ingest my footage?
The following facts regarding the Log and Transfer process were adapted from the [Apple Knowledge Base article|http://support.apple.com/kb/TA24840?viewlocale=en_US] on transferring AVCHD in Final Cut Pro 6.0.1 but still hold true for the current version of FCE:
AVCHD support is available only on Intel-based Macintosh computers.
AVCHD camcorders typically connect to computers via USB 2.0, not FireWire.
DVD-based AVCHD camcorders are not supported in Mac OS X 10.4 or earlier.
Standard definition video recorded with AVCHD camcorders cannot be accessed in the Log and Transfer window. SD and HD clips should not be mixed on the same HDD.
Preview of AVCHD video in the Log and Transfer window is limited to 1x forward playback. Scrubbing the playhead does not update the video in the Preview area until you stop scrubbing.
When you choose to transfer AVCHD audio in the Logging area, audio is automatically mixed down to stereo.
AVCHD footage is not ingested natively but is transcoded to the Apple Intermediate Codec.
Apple Intermediate Codec files are significantly larger than the original AVCHD files. FCE does not estimate the size of a transcoded AVCHD file before ingesting, so it is possible to exceed the available space on your capture disk during transfer. Before ingesting, keep in mind that the disk space required is about ten times greater than the size of the native AVCHD file.
Which specific formats can be ingested by Log and Transfer?
Only AVCHD footage can be ingested through the Log and Transfer process. Other formats and variants such as AVCHD Lite are not supported. All video should be recorded in a frame size of either 1440x1080 or 1920x1080 and a frame rate of 25 or 29.97 frames per second. Audio recorded on AVCHD camcorders is generally at a rate of 48kHz. If your camera shoots in a format that does not comply with one of these setups then it is most likely not supported by the application and is not guaranteed to work correctly.
Which Easy Setup preset should I select before ingesting my footage?
It is extremely important to select the preset that matches your media before you attempt to ingest via Log and Transfer. There is only one Easy Setup preset that matches the frame size and rate of your footage. If you intend to ingest AVCHD clips through Log and Transfer you will first need to select one of the following presets:
AVCHD-Apple Intermediate Codec 1440x1080i50
AVCHD-Apple Intermediate Codec 1440x1080i60
AVCHD-Apple Intermediate Codec 1920x1080i50
AVCHD-Apple Intermediate Codec 1920x1080i60
If these four options do not appear under your Easy Setup list then you probably need to run Software Update and update to FCE 4.0.1. DO NOT cycle through the available presets until you find one that works - there is only one preset that matches your media and it should be evident which one to choose by the way it is named. Select the AVCHD preset that mentions your frame size and frame rate (i50 presets support both 50i and 25p frame rates; similarly, i60 presets support both 60i and 29.97p frame rates). If you do cycle through many options in the hope of selecting the correct one through guess-and-check you will probably have corrupted your preference file and need to [trash your preferences|http://support.apple.com/kb/TS2611] before continuing.
Why don't my clips appear when I open the Log and Transfer window?
Make sure your camcorder records AVCHD in a format supported by FCE4. It should be connected to one of your computer's USB ports (never connect it to an external hard drive or other external device such as your keyboard or a USB hub), powered on, and set to video playback mode.
If the camcorder +does not+ mount on your Desktop your USB port or cable may be malfunctioning. Try plugging it in to another port or using a different USB cable to see if it makes a difference.
If the camcorder does mount on your Desktop but the clips do not appear in the Log and Transfer window you will need to point the program to the directory that contains your media.
First, click the Add Folder button in the upper left of the Log and Transfer window. The button looks like this:
Then, you will need to navigate to the root directory in which your media is stored. Most camcorders call this folder "PRIVATE" or "AVCHD" and it should be located at the very top level of the camcorder when mounted. If your camcorder records to a valid AVCHD directory structure then your clips should load after the Add Folder process is completed.
I would like to keep a working backup of my original clips so that I can delete them off the camcorder's internal memory. How should I do this?
There are two main ways to keep a backup of your clips. The first is to ingest every clip on your camcorder through the Log and Transfer process, and store the Apple Intermediate Codec files the application creates in an easily accessible place such as an external FireWire drive. The advantage of this method is that you have the ability to open back up old editing projects, reconnect the media as necessary, and keep going as if you'd never left. However, due to the large amount of space AIC takes up (usually somewhere in the vicinity of 41-50GB an hour when transcoded from AVCHD), this is not always feasible.
Another often preferable approach is to copy over the root directory in which your clips are stored (usually named "PRIVATE" or "AVCHD") from the camcorder to your computer or an external drive. As long as you maintain the original file structure, you will be able to ingest your clips again at a later date using the "Add Folder" process detailed above to navigate to their new location.
My clips appear, but when I attempt to ingest a red exclamation point appears and the window displays the message "Error: No Data"
This is one of the most common problems that users experience when trying to ingest their media through the Log and Transfer process. Luckily, it also has one of the easiest solutions.
In the Log and Transfer window, click on the gear icon in the top right and select "Preferences" in the contextual menu that appears.
Make sure the video is set to transcode to the Apple Intermediate Codec and the audio is set to Plain Stereo.
After doing so, hit OK and try to ingest again.
I am experiencing a problem that is not covered in this tip or the solutions here do not work.
The best thing to do at this point would be to trash your preferences and start a new topic in the [FCE Forum|http://discussions.apple.com/forum.jspa?forumID=936&start=0] with a detailed description of your problem. Check out the user tip on [Basic Troubleshooting in Final Cut Express|http://discussions.apple.com/thread.jspa?threadID=2662419] for more information.
This is the 1st version of this tip. It was submitted on December 03, 2010 by skalicki`.
Do you want to provide feedback on this User Contributed Tip or contribute your own? If you have achieved Level 2 status, visit the User Tips Library Contributions forum for more information.

Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in the topic below. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information below at your own discretion.
Working with AVCHD: Log and Transfer FAQs
Log and Transfer was introduced to the product chain in Final Cut Express 4, and is the program's process for ingesting files in the AVCHD format utilizing MPEG-4 AVC/H.264 video coding and either Dolby AC-3 or uncompressed linear PCM audio coding. The most frequently observed problems relating to the Log and Transfer process are generally quite easily addressed.
What should I know before attempting to ingest my footage?
The following facts regarding the Log and Transfer process were adapted from the [Apple Knowledge Base article|http://support.apple.com/kb/TA24840?viewlocale=en_US] on transferring AVCHD in Final Cut Pro 6.0.1 but still hold true for the current version of FCE:
AVCHD support is available only on Intel-based Macintosh computers.
AVCHD camcorders typically connect to computers via USB 2.0, not FireWire.
DVD-based AVCHD camcorders are not supported in Mac OS X 10.4 or earlier.
Standard definition video recorded with AVCHD camcorders cannot be accessed in the Log and Transfer window. SD and HD clips should not be mixed on the same HDD.
Preview of AVCHD video in the Log and Transfer window is limited to 1x forward playback. Scrubbing the playhead does not update the video in the Preview area until you stop scrubbing.
When you choose to transfer AVCHD audio in the Logging area, audio is automatically mixed down to stereo.
AVCHD footage is not ingested natively but is transcoded to the Apple Intermediate Codec.
Apple Intermediate Codec files are significantly larger than the original AVCHD files. FCE does not estimate the size of a transcoded AVCHD file before ingesting, so it is possible to exceed the available space on your capture disk during transfer. Before ingesting, keep in mind that the disk space required is about ten times greater than the size of the native AVCHD file.
Which specific formats can be ingested by Log and Transfer?
Only AVCHD footage can be ingested through the Log and Transfer process. Other formats and variants such as AVCHD Lite are not supported. All video should be recorded in a frame size of either 1440x1080 or 1920x1080 and a frame rate of 25 or 29.97 frames per second. Audio recorded on AVCHD camcorders is generally at a rate of 48kHz. If your camera shoots in a format that does not comply with one of these setups then it is most likely not supported by the application and is not guaranteed to work correctly.
Which Easy Setup preset should I select before ingesting my footage?
It is extremely important to select the preset that matches your media before you attempt to ingest via Log and Transfer. There is only one Easy Setup preset that matches the frame size and rate of your footage. If you intend to ingest AVCHD clips through Log and Transfer you will first need to select one of the following presets:
AVCHD-Apple Intermediate Codec 1440x1080i50
AVCHD-Apple Intermediate Codec 1440x1080i60
AVCHD-Apple Intermediate Codec 1920x1080i50
AVCHD-Apple Intermediate Codec 1920x1080i60
If these four options do not appear under your Easy Setup list then you probably need to run Software Update and update to FCE 4.0.1. DO NOT cycle through the available presets until you find one that works - there is only one preset that matches your media and it should be evident which one to choose by the way it is named. Select the AVCHD preset that mentions your frame size and frame rate (i50 presets support both 50i and 25p frame rates; similarly, i60 presets support both 60i and 29.97p frame rates). If you do cycle through many options in the hope of selecting the correct one through guess-and-check you will probably have corrupted your preference file and need to [trash your preferences|http://support.apple.com/kb/TS2611] before continuing.
Why don't my clips appear when I open the Log and Transfer window?
Make sure your camcorder records AVCHD in a format supported by FCE4. It should be connected to one of your computer's USB ports (never connect it to an external hard drive or other external device such as your keyboard or a USB hub), powered on, and set to video playback mode.
If the camcorder +does not+ mount on your Desktop your USB port or cable may be malfunctioning. Try plugging it in to another port or using a different USB cable to see if it makes a difference.
If the camcorder does mount on your Desktop but the clips do not appear in the Log and Transfer window you will need to point the program to the directory that contains your media.
First, click the Add Folder button in the upper left of the Log and Transfer window. The button looks like this:
Then, you will need to navigate to the root directory in which your media is stored. Most camcorders call this folder "PRIVATE" or "AVCHD" and it should be located at the very top level of the camcorder when mounted. If your camcorder records to a valid AVCHD directory structure then your clips should load after the Add Folder process is completed.
I would like to keep a working backup of my original clips so that I can delete them off the camcorder's internal memory. How should I do this?
There are two main ways to keep a backup of your clips. The first is to ingest every clip on your camcorder through the Log and Transfer process, and store the Apple Intermediate Codec files the application creates in an easily accessible place such as an external FireWire drive. The advantage of this method is that you have the ability to open back up old editing projects, reconnect the media as necessary, and keep going as if you'd never left. However, due to the large amount of space AIC takes up (usually somewhere in the vicinity of 41-50GB an hour when transcoded from AVCHD), this is not always feasible.
Another often preferable approach is to copy over the root directory in which your clips are stored (usually named "PRIVATE" or "AVCHD") from the camcorder to your computer or an external drive. As long as you maintain the original file structure, you will be able to ingest your clips again at a later date using the "Add Folder" process detailed above to navigate to their new location.
My clips appear, but when I attempt to ingest a red exclamation point appears and the window displays the message "Error: No Data"
This is one of the most common problems that users experience when trying to ingest their media through the Log and Transfer process. Luckily, it also has one of the easiest solutions.
In the Log and Transfer window, click on the gear icon in the top right and select "Preferences" in the contextual menu that appears.
Make sure the video is set to transcode to the Apple Intermediate Codec and the audio is set to Plain Stereo.
After doing so, hit OK and try to ingest again.
I am experiencing a problem that is not covered in this tip or the solutions here do not work.
The best thing to do at this point would be to trash your preferences and start a new topic in the [FCE Forum|http://discussions.apple.com/forum.jspa?forumID=936&start=0] with a detailed description of your problem. Check out the user tip on [Basic Troubleshooting in Final Cut Express|http://discussions.apple.com/thread.jspa?threadID=2662419] for more information.
This is the 1st version of this tip. It was submitted on December 03, 2010 by skalicki`.
Do you want to provide feedback on this User Contributed Tip or contribute your own? If you have achieved Level 2 status, visit the User Tips Library Contributions forum for more information.

I used to be able to download files from the Harddrive of my Sony Handycam, but now it won't let me import them while going through "log and transfer." I have tried to update my settings, but this doesn't seem to work. Any help would be much appreciated

I used to be able to download files from the Harddrive of my Sony Handycam, but now it won't let me import them while going through "log and transfer." I have tried to update my settings, but this doesn't seem to work. Any help would be much appreciated

Hard Drive: The Hard Drive is on my camera (Sony Handycam)
Just needed some info on what is going on with your particular system.
Knowing the exact camera model will also assist us.
If this camera is standard AVCHD you should be able to connect with USB to Mac with FCE open and use Log and Transfer without all the fiddling around converting etc.
What FCE does during ingest is convert files to AIC. (Apple Intermediate Codec)
FCE cannot read the individual files in the BDMV folder, that's why all the converting is required when you use that method.
BTW: regards formatting drives/cards/memory on cameras; it is wise to use the actual device to format rather than a computer. This is a prime cause of read/write goof ups with solid state media. This applies to still or video cameras.
Keeping the COMPLETE card/memory structure in tact is vital for successful transfers.
Try here for some trouble shooting tips:
https://discussions.apple.com/message/12682263#12682263
Al

Log and transfer idle

I have Juast got FCE4 upgraded to do HD. I'm trying to log and transfer my AVCHD footage. I changed my video and audio prefences. all my cips show up but if i try to play them they crash FCE. If i try to transfer them it lookes like its loading and than gives me the red sighne with the exclamation mark and sais clip queued -Idle

Have you used Software Update to make sure your copy of FCE is updated to version 4.0.1?
MtD

FCE log and transfer Q

Similar Messages

Maybe you are looking for