FCE un synching vid/aud between Viewer and Canvas 3 secs out in 20 sec clip

OK
I'm new to FCE having moved across from Vegas Video.
Working through the Izzy FCE Tutorial.
Starts with a 20 second HD clip that works great in the Viewer.
Drag video to time line and it looks OK except the audio is waaaaay out of wack. In a 20 second clip FCE is 3 seconds out of synch by the end of the clip.
I must have done something freaky here but I have searched and searched but cannot find an option to un synch audio/video.
Also other weird stuff.
If I have 6 clips in the browser, drag each one to the Viewer, set the In and Out drag the first one to the timeline and subsequent ones to the the Canvas/Overwrite.
Only the first clip will show until I start playing the first clip in the timeline then all the others then suddenly pop up.
Also, Edit/Undo has an accelerator of CMD Z, nope that doesn't do anything.
If I set the edit point in the timeline mid clip, then drag a new clip from the Viewer to the Canvas and select insert, it inserts the video at the edit point but puts the audio somewhere completely different. The Audio timeline shows the audio in the right place but when you play it is randomly placed earlier in the timeline.
This is all very strange indeed and leaves a noob to FCE well and truly confused.
I'll try another reboot. But this puppy is looking like it may be going back to the Apple shop.

"Starts with a 20 second HD clip"
What exactly are the specifications of your clips? How did you get them into FCE?
"Only the first clip will show until I start playing the first clip in the timeline then all the others then suddenly pop up."
Sounds like you don't have the timeline set to fit to window Shift-Z.
"Edit/Undo has an accelerator of CMD Z"
Have no idea what this means.

Similar Messages

  • Differences between view and materialized view

    Hello,
    Please tell me the Differences between view and materialized view in oracle 9i.
    Thanks and regards
    Madhuri

    How can I create index in a view?
    Please read reply of Justin Sir.
    Regards
    Girish Sharma

  • FCE 4: Picture in Viewer and Canvas is too small

    I'm still learning but the picture in my Viewer and Canvas don't show very well. They show up with 2 grey bars on the left and right of the picture. Above the picture it shows 71% instead of 100%. When I put to 100% the picture will be zoomed very big. I have no idea where's the problem but there must be something very wrong. Before i had crosslines in the viewer but this problem is solved. But how do i get the picture back to fullsize in the Viewer and Canvas?

    Tom's right, if there isn't enough room for FCE to display the image full size in the window it scales it to fit. Make the windows larger, (for example put it on compositing view under window arrangement), and then choose scale to fit for each of the images.

  • What is the difference between view and materialized views

    Hi
    What is the difference between view and materialized view ? can we update the base table using views

    can we update the base table using viewsYes:
    VIEWS
    1. an updatable view is one that lets you perform DML on the underlying table
    (see Oracle Database Concepts 10g - 5 Schema Objects)
    2. non-updatable view requires INSTEAD OF Triggers
    (see Oracle Database Concepts 10g - 22 Triggers)
    SNAPSHOTS
    You can have updateable (and writeable) snapshots - in updateable (writeable) MV replication.
    Oracle uses snapshots (Materialized Views - MV) for two different purposes:
    1. replication
    2. automated Query Rewrite facility (first introduced in Oracle Discoverer, later included in Oracle database 8i).
    Replication types in Oracle are:
    a) Basic replication (MV replication)
    - transaction based
    - row-level
    - asynchronous from master table to MV (Materialized View)
    - DML replication only
    - database 7 / 8.0 / 8i / 9i / 10g
    - Standard and Enterprise Edition
    1. Read-only MV replication
    2. Updateable MV replication:
    2.1 asynchronous from MV to master
    2.2 synchronous from MV to master
    3. Writeable MV replication
    b) Multimaster replication
    - transaction based
    - row-level or procedural
    - asynchronous or synchronous
    - DML and DDL replication
    - database 7 / 8.0 / 8i / 9i / 10g
    - Enterprise Edition only
    1. row-level asynchronous replication
    2. row-level synchronous replication
    3. procedural asynchronous replication
    4. procedural synchronous replication
    c) Streams replication
    - (redo) log based
    - row-level
    - asynchronous
    - DML and DDL replication
    - database 9i / 10g (10g has Down Streams Capture)
    - Enterprise Edition only (Standard Edition 10g can execute Apply process)
    Regards,
    Zlatko Sirotic

  • Difference between view and window ?

    Hi All,
    Can you tell me a basic difference between view and window , maybe you can correlate your answers with concepts of HTML.
    Rajeev

    Hi Rajeev,
    A window is a place for displaying your views. Your view is not available to the outside world. View is available only to your component. However, your window is an interface view, which can be displayed in other components.
    A view contains your UI elements. It has a layout (a window does not). A window contains embedded views.
    In the window, you can define how navigation between views takes place (by creating navigation links).
    Regards,
    Neha
    <i><b>PS: Reward if helpful</b></i>

  • What is the main difference between view and materialize view and advantage of Mview   ??

    What is the main difference between view and materialize view and advantage of Mview   ??

    1.A view uses a query to pull data from its associated tables.
    2.Views do not have data's physically stored in the Database.
    3.Views Get the Data from 2 or more tables and displays as a single block.
    4.But a materialized view is a table on disk is a result set of a query done.
    5.A Materialized view can have data's in the database.
    6.Materialized view are used for Boosting the Performance.
    7.And the important one is Materialized views are updated based on the parameters defined when they are created.
    8.By using triggers we can update the data in a materialized view.
    9.When you call a materialized view it will show the data when it was last updated.
    Hope it helps.

  • Difference between  view and synonym

    i want the difference between view and synonym ,and also the cases where view and synonym are used

    How this is related to 'issues and concerns with downloads' is beyond my understanding. Your question seems to be related to database and should be re-issued in the database forums.
    In the mean time, the definitions of each are given at http://download.oracle.com/docs/cd/B19306_01/server.102/b14220/intro.htm#sthref69

  • Color profile for Viewer and Canvas?

    I've noticed that the color of the video in the FCPro 4.5 Viewer and Canvas looks absolutely nothing like the color when I output to DVD or QuickTime movie. (The video in FCPro seems to be much darker.) Is there a way to make the Viewer and Canvas look more analagous to what I'm going to get on final output?
    Thanks.

    Nope. Computer monitors colors have such a wide range that they are very unreliable. This is why it is best to hook up a TV, or better yet a properly calibrated NTSC Monitor (the latter only if you are producing professional video).
    #8 External Monitor Viewing.
    Shane's Stock Answer #8:
    A simple path is mac > firewire > camera or deck > rca cables > tv
    Then start up your camera and tv, then open fcp.
    Then go View > External video > all frames
    Video playback should be Apple firewire NTSC (If you are using an NTSC set)
    Audio playback should be Audio follows Video
    Techinially, this should send synched video to your TV
    If for some reason you can't view your timeline on your external monitor, there are a few things to try:
    1) Make sure that the camera/deck is connected and powered on BEFORE you open FCP.
    2) In the Final Cut Pro menu select AUDIO/VIDEO Preferences and make sure your signal is being sent out thru Firewire DV.
    3) Go to the menu and select VIEW>EXTERNAL>ALL FRAMES.
    4) Click in the % box above the image and select FIT TO WINDOW.
    5) Go to VIEW->refresh A/V devices
    6) Make sure the Log & Capture window is closed
    If you want it to play in both the canvas and the external monitor you need to go to the FINAL CUT PRO menu and select AUDIO/VIDIO settings and make sure MIRROR ON DESKTOP is selected under the PLAYBACK OUTPUT section
    For all the stock answers, click on this link:
    Shane Ross, "Stock Answers", 03:58pm Jan 13, 2005 CDT

  • 16:9 viewer and canvas

    Ok, this is a simple thing, yet it is bothering me. Every time I see a picture of someone using FCE, the viewer and canvas are widescreen. I can't seem to get my canvas and viewer to be widescreen. I can work with widescreen just fine, but I have grey bars above and below the image. My viewer and canvas are in 4:3 ratio. Can anyone explain how to get the viewer and canvas into a 16:9 ratio?
    Thanks
    Alex

    I am assuming that you are working with standard definition DV but have the camera set to the 16:9 setting? If so, you need to change the Easy Setup setting to DV-NTSC Anamorphic. After changing that setting create a new Project, or from the current project, just create a new Sequence (since the existing default first Sequence will still be using the DV-NTSC setting). Once you open the new Sequence, click Window, Arrange and choose one of the existing settings (Standard, Compositing, or Small Windows). The Viewer and Canvas window should automatically switch to the widescreen 16:9 format with no grey bars. The Browser and Timeline windows will also resize to match the changes in the Viewer and Canvas.

  • Is it possible to transfer music between iPhones and iPods with out using iTunes

    Is it possible to transfer music between iPhones and iPods with out using iTunes

    Nope.  Both require iTunes on a computer to sync music from.
    Unless the iPod is an iPod Touch and the music was bought from iTunes.  In which case the Touch can simply go to the iTunes App, under Purchased  and download the purchased songs for free.

  • FCP 7, viewer and canvas window is dark in lion

    How to fix this problem???

    The image in the Viewer and Canvas windows are 1 to 2 apperture too dark. When I convert a timeline to .mov file into Compressor or Quicktime converter, has the picture (movie) the right exposure ...
    hope my English is understandable...

  • Cant see any video only white screens in Viewer and Canvas

    I dont know if anyone has encountered this figured out how to resolve it yet. In FCP 7 on Snow Leopard when i drag a clip into viewer or try to edit in the Canvas all i see is a white screen. The title safe lines and wireframe show up when i turn these on and off, but no video. I occasionally get a solarized image in the Canvas. the time code progresses, but nothing in either window.
    Thanks for any insights.

    Thanks for all the suggestions, including links back to earlier discussions. This did shed some light, (and kicked me to be more explicit), when reviewing an earlier question on the same issue, but stating that this happened on an external Dell 2408 monitor...which is what I am using to edit. When i open the MBP and remove the video miniport cable and try to play on the laptop display, all is well, I can see video in both Viewer and Canvas. When i plug the monitor back in and drag these windows over to the monitor (cant move the FCP application wholesale) they also play fine. When i close the MBP, wait and refire it up with mouse or keyboard...I see video in both, but when i play either one the image jumps back and forth, cycling from one frame and back...while the time code advances and the audio track does too.

  • DnD between Jlist and Canvas...

    Is it all possible to drag the list item from JList and drop it inside the Canvas and place a reference (e.g. lsit item name ) at the exact coordinates where the drop is performed?
    Additionally, for the purpose of my project the Canvas already contains an image of a model space and would need to stay in the background all along!
    Please if anyone have any thoughts, recomendations, suggestions post these here.
    Thanks

    Please, is drag and drop possible between JList and Canvas components so that the inserted item from JList is displayed over the image displayed in the Canvas component?

  • Green screen in both viewer and canvas

    Came in this morning, tried to log and capture some material from my dsr-11. Got i/o error. Quit, restarted and the viewer and canvas screens were green. Quit and tried starting FCP without a project open. Same thing. Tried restoring old preferences. same thing. Tried restarting from cloned drive, same problem which seems to indicate a hardware problem, ran hardware tests in techtool pro without any success. Any ideas?

    Update. I bought a new firewire 800 card (a LaCie, the same as the old one) but haven't installed it yet. I figured, let's see what happens if you reconnect a drive to the old firewire 800 card. Same thing; both the viewer and canvas screens are green. I quit, disconnect the drive from the firewire 800 card, restore preferences using fcprescue, same thing. I do a restart, same thing. Then I do what I did yesterday, shut down, disconnected the g5 from power for 5 minutes, reconnected, restarted, everything's working again.
    So a good reminder: if things are working properly and you've tried a bunch of remedial steps, Shut down and disconnect power from your computer for a couple of minutes. Never made much sense to me, but it sometimes will help.
    I'll replace the firewire 800 card in a while and post back what happens.

  • White Viewer and Canvas screens in FC Studio & Not an Idiot

    iMac
    2.66 GHz Core Duo
    2GB RAM
    OS X 10.5.8
    FCS 3
    The viewer and canvas have apparently decided to flip to white and remain there. But first, they decided they'd rather display a strange, posterized/solarized version of whatever clip was loaded at the time.
    Viewer prefs set properly to RGB
    Background set to black.
    Changing display prefs from millions to thousands then back again - fail.
    Clean reinstall of FC Studio - fail.
    QT test clip - 720x480, DV/DVCPRO - NTSC
    Any ideas?

    Viewer prefs set properly to RGB<</div>
    Okay, you know that one. Good.
    Background set to black. <</div>
    Completely irrelevant. Not good.
    Changing display prefs from millions to thousands then back again - fail. <</div>
    Right, but a restart of FCP or the Mac might also be part of that debug just to rule out all possibilities.
    Clean reinstall of FC Studio - fail. <</div>
    Of course. Reinstalling Apple software is the LAST thing we'd suggest. Well, it's the last thing I would suggest. It is almost always a complete waste of time for a long list of reasons but mainly for only one: unlike Windows apps, Apple software just doesn't work that way.
    QT test clip - 720x480, DV/DVCPRO - NTSC <</div>
    Okie dokie. When you play this clip in QT what happens?
    when you launch Motion and attempt to run a previously saved comp what happens?
    Any ideas? < </div>
    Debugging your particular issue is not going to be easy. Trying to figure out if it's FCP, QT, your graphics card, your monitor, or some other weird and obscure setting is a question, largely, of having a good feel for your system's behaviors and application inventory and history.
    Stick with it, we're going to be asking you some really idiotic questions and asking you to perform some really lame tests.
    bogiesan

Maybe you are looking for

  • JMX unregister MBean does not work?

    Hi, I'm registering MBeans with the following code: final ObjectName name=new ObjectName("management:type=MyBean"); mBeanServer.registerMBean(name); When I run jconsole, I can see those MBeans being added to the registry (each call results in a new b

  • Goods Receipt Printout for an Order (Process Order)

    Hello all, The order was confirmed in parts (partial quantities) , the ones that were confirmed yesterday had the GR Label printed immediately whereas the quantities confirmed today had no print output. Why is it so ? Could you please help me out ? O

  • Disable Collaboration Features coming up in the popup window for somegroups

    Hi, How can I disable the Collaboration Features (Send Email,Create Appointment,Send InstantMessage,CreateTask etc ) that come up in the popup window whn we click on the link provided just after user name. I know how it is to be done for all users. B

  • New download Cause problem with syncing

    Since downloading the lastest ITune, i can't sync my Ipod Nano 6th gen to the ITune. I keep getting Ipod has been detected but it could not be identified properly. Please disconnect and reconnect the Ipod, then try again. Note: i have reinstalled 2x

  • Portal Alignment

    Hi, I am using a portal component (TreeView) in EP6 where the font alignment with the tree node icons is not proper. Can anybody help me in achieving this? You can go in this link to find out the exact alignment problem. <http://www.wikiupload.com/do