FCP launches v slowly and then totally jams my macbook pro
recently purchased FCS 3 academic version and installed it on MBP and imac. works perfectly on imac. but when i try to launch it on MBP it takes 5+ mins and totally jams the computer (cannot even force quit, i have to power down). have added 2GB of additional memory, cleared external hard drive of all media i don't need, archived all old files from MBP, uninstalled and reinstalled FCP twice, removed preferences and still no change. driving me mad .... any ideas of what might be the problem and what if anything i can do about it?
recently purchased FCS 3 academic version and installed it on MBP and imac. works perfectly on imac. but when i try to launch it on MBP it takes 5+ mins and totally jams the computer (cannot even force quit, i have to power down). have added 2GB of additional memory, cleared external hard drive of all media i don't need, archived all old files from MBP, uninstalled and reinstalled FCP twice, removed preferences and still no change. driving me mad .... any ideas of what might be the problem and what if anything i can do about it?
Similar Messages
-
If I download FCP to my old macbook, and then upgrade to a macbook pro, can I transfer it the new machine even if I keep both running?
Ian Brown, thankyouthankyouthankyou for taking the itme to reply
I am not (indeed) a film studio, so this is EXCELLENT news. -
My time capsule was working and then I added another Macbook pro. TC stopped appearing in Airport Utilities. I have tried resetting TC, I have turned if off and held reset button with pen for >10 secs. I just cannot work out what else to do? I have turned router off and on. Amber light is flashing.
The ethernet says self assigned IP 169.254.67.6
Then the ethernet is not getting an IP from the TC.. there is no connection.
I am not sure where you mean when you say the green LED should be on. Do you mean the TC?
Thanks
In order to help troubleshoot ethernet connections all routers use connectivity leds.. even APPLE.. it has one big LED on the front.. and 4 tiny leds beside each ethernet port. That light has to come on for ethernet to be active.. if you plug an ethernet cable into the port and the light doesn't come on.. then there is no connection.. either the other end isn't plugged in.. or the cable is bad.. or the ethernet port is bad.. something is wrong.
To get access to the TC you need this led to be green.. is it?
If it is green and the WAN is also green.. then I want you to unplug the WAN connection.. the blue wire in the picture.. the port slightly separated from the 3 LAN port.. computer plugged just into LAN port.. no airport turned on.. and press the reset again for 10sec until front led flashes rapidly.. then try and bring up the airport utility again.. assuming the ethernet led is green.
How old and what model is the TC?
The A number from the rubber mat will tell us the model. -
My Internal HD became corrupt and it would not boot up so I installed My osx onto a new HD via usb and then inserted into my macbook pro but it wont boot up. It will only boot up if i connect via usb how can i boot it as an internal HD?
Shootist007 wrote:
If the system won't boot from the new drive the OP bought and install OS X on it it certainly won't boot from the original drives Recovery HD partition.
Sorry genius.....but if the Recovery disk shows up that means the disk cable isn't bad. Could be he did have a screwed up HDD and when he put the NEW HDD in (after putting the OS on it via USB) the computer didn't reconize it and therefore didn't boot the OS. Just maybe right genius? Don't rush to criticize someone's recommendations until you realize other possibilities. (I did say "if it does")
Thank you -
Ok so last night I turned off my MacBook Pro with 66% of battery while charging and disconnected. Now today I turned on and it started like if battery went out while using it so when it turned on it showed 0% of battery then it whent really slow opening safari so I wanted to restar and couldn't so I holder the power button to turn it of and when I tried to turn it back on it just turns on and shows the apple and like an update bar loading and then it turns of it self. What to do?? Need help
Hi again ggt15,
You can find some more information about the Recovery Partition of your hard drive here:
OS X: About OS X Recovery
http://support.apple.com/kb/HT4718
It sounds like you might be trying to reinstall your copy of the operating system. If that's the case, you may also find some helpful information here:
OS X Lion: Reinstall Mac OS X
http://support.apple.com/kb/PH3878
Thank you for using the Apple Support Community. Due to the nature of your issue or question you may find more information by using another one of Apple's support resources - https://expresslane.apple.com/GetproductgroupList.action.
Cheers,
Braden -
I've tried for a few days to figure out why I cannot be sure that my iTunes back-up to an external drive has "worked" or not. I finally decided to try to transfer the content from the external drive to my newer MacBook Pro. I already knew that the number of songs on the newer laptop were fewer than what are on my older one. (I basically only use my older MacBook Pro now for iTunes.) But today, still had not luck. There is still a difference of over 100 songs appearing on the iTunes of the newer laptop than are on the older one.
I'm pretty sure that I just don't undertand the Apple article very well: "ITunes: back up your iTunes library by copying to an external hard drive."
This would not be so frustrating for me did I not have over 3000 songs, imported from CDs that I myself own, in my old laptop. The thought of redoing this import is, well, tiring to say the least.Go through the below forum with similar issue and follow the process mentioned by "Macjack" in the beginning.
https://discussions.apple.com/thread/4499820 -
I am getting error [/ppro722/releases/2013.10/shared/adobe/MediaCore/Backend/Make/Mac/../../Src/Core/Propert ieslmpl.cpp-569] when I launch PREMIRE CC and then crashes..could you please advice? thanks in advance
I am on Windows, but have a few saved Mac discussions that may help (or, may not... but free to read)
Mac and Root User http://forums.adobe.com/thread/879931
-and http://forums.adobe.com/thread/940869?tstart=0
Mac & nVidia Driver http://forums.adobe.com/thread/1075592
-and http://www.nvidia.com/object/mac-driver-archive.html
Mac Retina Bug http://forums.adobe.com/thread/1159632
Troubleshooting guide for Mac freeze
http://helpx.adobe.com/x-productkb/global/troubleshoot-system-errors-freezes-mac.html
http://blogs.adobe.com/aftereffects/2011/02/troubleshooting-quicktime-errors-with-after-ef fects.html
External speakers stop playback http://forums.adobe.com/thread/1370072?tstart=0
OSX Crash http://helpx.adobe.com/creative-cloud/kb/ame-premiere-crash-launch-export.html -
Macbook Pro Keeps Restarting Itself and then totally crashed
Dear all.
I am using Macbook Pro 13-inch (i7 2.9 Ghz, 8 GB DDR3, 750 GB) with OS X Maverick (10.9.4).
For the last few months, my Macbook Pro kept restarting itself and I usually ignored this issue until yesterday, my MBP fail to boot up, only display the grey apple logo and rolling icon below for almost 30 mins.
I tried the safe mode and reset NVRAM method and it still fail to boot up and sometimes a black text appears (aka kernel panic).
Then i took my macbook pro to the nearest Apple service provider and the technician said that it was probably due to the 750 GB Hard Disk since the HD itself is a faulty product, therefore we can't find any 750 GB HD nowadays. So he recommended me to replace my current HD with a new HD. I took his advice and I replaced it with 1 TB Toshiba HD. And then the technician reformat my MBP and installed the OS X Maverick. My Macbook pro able to boot up now.
However the next day I still find my MBP keeps restarting itself (until now) and take note that I didn't install any new softwares, I only updated the available updates in Apps Store for the OS, iBooks, and iTunes.
Can anyone recommend me what to do? Is this a Hardware problem or software problem?
I'm thinking to switch back to OS Lion to see whether this is mainly due to OS Maverick.
Thank you.Unfortunately yes. Since the computer is unable to boot up, that part of the software starts BEFORE the OS would. Last time I had this problem, it turned out to be a faulty GPU (soldered to the logic board) and i needed to replace the logic board. If you wanted to, you could indeed back up your personal data (you should ANYWAY, no matter what you do) and you could try to do a fresh install, but I'm fairly confident you are experiencing either faulty ram, or a faulty logic board.
-
I have PS 4,5,and 6 installed on my Macbook Pro as well as Lightroom 4 and 5. Can I remove PS 4 and 5 and LR 4? PS 4 is the total install and PS 5 and 6 are upgrades. LR 4 is the full package with LR an upgrade.
I need space!First let me disabuse of a misconception: All Adobe upgrades are FULL installers. Whether you buy them as upgrades or new versions does not make an iota of difference. The upgrade installers do not need to find a prior version installed, they just prompt you for the old serial number as well as the old one, and they do not rely on the old version in the least.
Second, the time to uninstall an older version is BEFORE upgrading to a newer one. Otherwise, the uninstaller from the older versions will mess up with your new install. There are a gazillion files that are named the same and in the same locations as the new one.
Your best bet now is to uninstall ALL the Photoshop versions you have installed, including the newest one, one by one, then run the Adobe CS Cleaner Tool, then run Repair Permissions from Apple's Desk Utility, and finally re-install the latest version.
The other alternative, if your boot HD is large enough (very doubtful in case of a laptop like a Mac Book), is to leave all versions on it.
Your choice. -
Hi, I downloaded Yosemite this evening. It downloaded fine, it installed fine and then it restarted the Macbook. Now it seems to be frozen. I have nothing but a grey screen with the apple logo and a bar that is half black and half grey. It's been like this for over an hour. Should I worry or is it still working at something? How do I fix this if it's not still working at installing something. Thank goodness for this poor old pc as backup.
Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider. -
How can I transfer my email accounts and emails from my old macbook pro with ML to my new macbook pro with ML
Do you have your system backed up to Time Machine? If so, you can open your user Library and copy your Mail folder from Time Machine to your Desktop on your new machine; then copy THAT folder to your new machine's user Library.
To get to your user Library, open Finder and Go and press the Option key. Library will show up. Click on it to get into your user Library. Now go into Time Machine and you should see your user Library for Time Machine. Restore the Mail folder to your Desktop. -
Is it possible to run two different versions of Apple operating system (for ex. 10.6.8 and 10.9) on a MacBook Pro, either on the same disk or from an external hard disk? If so, where would I find the details? (In order to be able to use the older applications no longer supported in 10.9)
If you want to add a second partition to the internal drive (in Disk Utility, select the drive, then open the partition tab and just click the + button), you should first be sure that you will have enough room to accommodate whatever the second volume will be. I am currently doing this for Snow and Mountain Lion.
To get to whatever volume is not the startup disk, restart and hold down option/alt at the chime, which will bring up a selection of the two volumes. Use the left or right arrow keys to select it and then hit enter/return. -
I want to transfer an audiobook and a movie from my MacBook Pro to my iPhone 4S, and can't figure out how. I went to "Help" and it said after connecting the two devices I should "Click Apps," but I can't find anything labeled "Apps" to click. Help?!!
If you have iTunes 11 on your Mac then you can enable the left-hand sidebar via option-command-S, that might make it easier to navigate.
Connect the phone to your Mac and select it on that left-hand sidebar, and on the right-hand side of the screen there should be a series of tabs which you can use to select what to sync to the phone. If it's an audiobook then it should appear on the Books tab for selecting/syncing, and films will be on the Movies tab. When you've got the audiobook on your phone you should get an Audiobooks option in the Music app (you might need to tap the '...' tab at the bottom of the Music app to see it). -
I have Adobe Photoshop and Adobe Lightroom on my MacBook Pro laptop. I bought an iMac and I'd like to move my installations to the larger display desktop for editing purposes. How can I go about transferring them?
I have the same question. It seems that Adobe is almost impossible to contact (I ended up here at the forums to ask the same question).
I will never buy another Adobe product again if I can get another program to replace it. If this is customer service then it is NON EXISTENT!
I notice that your question has not been answered and why should you have to get the information from a forum? I know of no other company that makes you do this for simple product information.
NOT HAPPY with this version of arrogant customer service (nor am I happy about renting Photoshop products into the future - it is just a money grab in my opinion). I will be voting with my feet and going elsewhere in future. -
I have lost all my address book and iCal content on my MacBook Pro. How do I restore from my iPhone?
I have lost all my address book and iCal content on my MacBook Pro. How do I restore from my iPhone? I tried synchronising my iPhone to the MacPro but then lost all the content on the iPhone. I managed to get it back using the restore. This means the only content I have for Address Book and iCal sits on my iPhone!
Put one unique entry in both iCal & Address Book on your Mac. These entries can be fake, that doesn't matter, just make sure Address Book & iCal are not empty. Then when you select to sync contacts & calendars on the Info pane in iTunes, you'll get a merge or replace prompt. Select merge.
Maybe you are looking for
-
What is the best way to import and export footage from the 5D Mark II?
Hello, I've just finished shooting what I am considering to be my directorial masterpiece. Shot it on the Canon 5D (1080p, 24fps), and the footage looks amazing. Now I am ready to start editing and have been using premiere lately, but I have yet to
-
How to add a movie to the iTunes Library
I just encoded a movie in m4v format. When I got to Itunes / File / Import, it apparently does import it, but then I can't see the movie in the movie panel of iTunes.....any hints?
-
Can I use reader extensions with LiveCycle Designer ES or do I have to upgrade to ES4? I am running version 8.2.1.
-
I am running Windows XP on a P4 2000 system. I previously was using the LR beta version and had no problems. I downloaded the 30 day trial version and now none of my images load into thumbnails in the Library module. In the Develop module only the si
-
WELCOME_CLAUSE is displayed instead of "Welcome portaluser" in portal
Hi , We are working with EP7.01. When logged into portal WELCOME_CLAUSE is displayed instead of "Welcome portaluser" in portal. Can anybody please help me in resolving this issue. Where do i need to make changes. regards, Sree.