FCP not working with Leopard

Every time I try and launch FCP5 Studio 2 it gives me the "This application Final Cut Pro quit unexpectedly." Anyone have a solution to this? Anyone else experienced this?
Do I just have to wait for an update?

Having same problem with FCP v 6.0.1 and tried the FCP Rescue 6..... Also does not work with Leopard.
I am just about to try this proceedure.
Delete the User Preferences
You can resolve many issues by restoring Final Cut Pro back to its original settings. This will not impact your project files, but you should verify your Scratch Disk location setting after doing this. To reset your Final Cut Pro user preference settings to their original state, do the following:
In the Finder, go to ~/Library/Preferences—the tilde (~) represents your Home folder.
Remove the “com.apple.finalcutpro.plist” file from the Preferences folder.
Remove the “Final Cut Pro User Data” folder from the Preferences folder.
Will report shortly.

Similar Messages

Osascript for remote login does not work with Leopard

We are testing Leopard on one computer in our labs. The only problem so far is that the osascript that we use to remote login to the computers stopped working (although it works fine on the Tiger machines):
osascript <<EndOfMyScript
tell application "System Events"
keystroke "public"
keystroke tab
delay 0.5
keystroke return
keystroke tab
delay 0.5
keystroke return
keystroke return
end tell
EndOfMyScript
This is a public account with no user password. I've read the discussion below, but have not been able to tweak the command so that it works with Leopard. Any suggestions?
Thanks.
http://lists.apple.com/archives/Remote-desktop/2007/Nov/msg00045.html

I'm having a similar problem - the script below works with my G5 iMacs running 10.4.9 but not the Intel iMacs running 10.4.8. It almost works - the username and password appear in the right boxes, so I run around the room pressing the Return key.
# This script when used with ASR Send UNIX command will login workstations at the LoginWindow.
# The script assumes that the cursor is focused in the Name field.
osascript -e 'tell application "System Events" to keystroke "username"'; \
osascript -e 'tell application "System Events" to keystroke tab'; \
osascript -e 'tell application "System Events" to delay 0.5'; \
osascript -e 'tell application "System Events" to keystroke "password"'; \
osascript -e 'tell application "System Events" to delay 0.5'; \
osascript -e 'tell application "System Events" to keystroke return'
Message was edited by: Catocop

Photoshop 7 DOES NOT WORK with Leopard ( OS 10.5 )

If you are not prepared to upgrade your Photoshop 7, DO NOT UPGRADE TO LEOPARD.
Photoshop 7 and OS 10.5.x (Leopard) are not compatible. When Adobe released Photoshop 7 in 2001 as a Universal Binary for OS9 and OSX they had no idea that Apple would be switching to an Intel chip in 2006. As the release of Leopard is also the end of the Classic environment, this may be the reason Photoshop 7 does not work in Leopard.
As of the release of CS4, Photoshop 7 can no longer be used as a path to upgrade Photoshop. A full version has to be bought now. But Photoshop CS or later can still be used as an upgrade to Photoshop CS4.
It is recommended that Photoshop 7 owners still looking to save money on upgrades stay away from eBay, as, unfortunately, much of the software listed is pirated or misrepresented and you will still not be able to upgrade to CS4.
[topic updated by Forum Host]

There is a third party version of Firefox 4 that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox

ATI Radeon 9600 Mac & PC Edition will not work with leopard

When I installed a new ATI Radeon 9600 Mac & PC Edition, 256MB; my Dual 2 GHz G5 (June 2004) will not allow me to drive my Apple Cinema Display while running under leopard, (neither 10.5.1 or 10.5.2 with Leopard Graphics Update).
The mac starts up as usual and gets to the white screen with Apple logo -then the progress ring eventually stalls. The mouse pointer becomes visible and can be moved freely around this screen.
I can connect from other macs on the network and navigate files, but screen sharing results in an all black window.
The Radeon 9600 works fine if I start up the mac with the Tiger installation disk.
I have tried every suggestion that I could find on these boards and elsewhere: zapped the pram, reset the SMU, installed older ATI Drivers, etc...
Of course the G5 is far out of warranty. I've been running Leopard since the day it shipped - so that's out of warranty now, and there is little help to be found on the ATI/AMD website. I'm afraid I'll have to return the card before Apple releases another graphics update.
The stock graphics card that came with this mac is the nVIDIA 64MB GeForce FX 5200 - but it's having trouble keeping up with Leopard's demands - my isight barely works, most special effects in iChat and PhotoBooth are unusable, and of course I'm not given the option to use a transparent menu bar,
I am really good at swapping video cards in the G5 now - but I'm so frustrated.
Does anyone else have any suggestions?
thanks

Hello I have Grafic card ATI Radeon 9600 Pro-256MB install. after Updates. I was after *delete all ATI files besides*
ATINDRV.kext
ATITVOut.kext
ATIRadeon.kext
ATIRadeon9700.kext
ATIRadeon9700DVDDriver.bundle
ATIRadeon9700GA.plugin
ATIRadeon9700GLDriver.bundle
ATIRadeon9700VADriver.bundle
ATIRadeonDVDDriver.bundle
ATIRadeonGA.plugin
ATIRadeonGLDriver.bundle
ATIRNDRV.kext
from System/Library/Extensions run ther 30'' Cinema, mit 2560x1600 but without Quartz Extreme . *I'm very angry of APPLE* 3 week without help, 5 Telefon support with Apple, with ATI without solution.
I know that ATIRadeon9700.kext drive Quartz Extreme. But I don't know what can I do too.
My solution for this moment is only this one. If I know my solution from Apple, ATI or another one look sometimes on
http://discussions.apple.com/thread.jspa?messageID=6645245&#6645245
Message was edited by: knoche
Message was edited by: knoche

AE not working with Leopard and fed up

It happened a while ago, and set it up again, and again, again.
It all stated after upgrading to Leopard
Today I was about to listen to some music through AE, and once again it didn't work. I had the green light on, it shows as connected in my router setup page. I have change internet suppliers a couple of month ago and have brand new router, but it was happening with my previous router too. In fact in the last 5 months I have used 4 different router, all branded. Airport Utility couldn't find AE.
Today I spend more than 2h simply trying to set it up again.
It took 4 or 5 hard reset before Airport Utility finally found the AE.
When I clicked on continue, 9 time out of 10 I got
Base Station Error
Airport Utility was unable to find Apple wireless device
while it is was obliviously showing before
and back to hard reset.
If I connect an ethernet cable I get the self-addressed IP trouble, but strangely I have managed to set up AE only when the ethernet cable was connected, but the set-up was through WIFI, as it asked me to switch network.
I tried to switch off the firewall with no success either.
I looked at my local wireless networks using iStumber, and once again find some new network with the same channel as mine, so I changed mine to a channel not used. I did this a month ago already.
As I said some how after 2h of wasted time etc, I finally managed to get it going, and started to listen to some radio with Airfoil. After about an hour of listening, it when dead again.
Airport Utility doesn't find the device any more, like at the start of the day. iTunes doesn't make it available, my green light is on, my router shows it as connected, and of course I cannot print any more.
I am getting really fed up. It has been working ok for a couple of years with Tiger, but with Leopard it just works when either it wants.
After all these are Apple products, are not cheap, and don't work.
All are with last firmware, last upgrade etc..
Please tell me why all this is happening, why there isn't any fixes. We are 10.5.6 more than 18 month after launch of Leopard, with snow leopard about to become available. Is it because I am using a non intel machine?
Many thanks

Reading over your message, I am a little unclear about how far along you are in sharing your LightRoom setup with the Laptop. I am going to assume that right now Lightroom and the pictures are both on the PC and on an internal Hard Drive. And except for the scary message you had at the beginning of changing to ver 1.2, everything is working ok. Yes?
What I'd do is wait until you get the external drive up and working. Once you are satisfied that the system works ok, and you have tested it with whatever diagnostic software you use, you are ready to start moving your images to the new drive.
Do a good backup of your images to your backup drive.
Move them to the hard drive from within Lightroom: Use the '+' symbol in the heading of the Folders panel to tell LR to add a new folder from the external drive to the LR folders panel, and then drag and drop the folders already in LR over to their new home.
This way the LR Catalog will always know where the files are.
Then when you are sure that all the image files are on the external drive and LR sees them all and everything is working correctly, exit from LR and copy the catalog file over there.
I used to use windows systems, although I converted to Mac a few years ago. You should be able to double-click on that catalog file that is on the external drive and it should start Lightroom and you should be good to go.
I just used the word "should" three times meaning I'm not really positive about that last step; if I'm wrong I hope someone on a PC will post a correction.
Once it is working OK on the PC with the external drive Load LR on the Laptop.
Best Wishes!

Printer Drivers Not Working with Leopard

I downloaded the Oki C5150n driver for Intel Macs and they don't work properly with Leopard. I need to use the bypass feed, but the drop down menu to choose the paper source only drops partway down not allowing any choices.
This is only happening with CS and CS3. The printer works fine with MS Office.
I have the Oki driver on my Macbook Pro and it works fine, but I'm running Tiger on the Macbook Pro.
Any Help would be appreciated.
Thank you,
Homer
[email protected]

Same issues here...same setup. This has been an intermittent issue for some time now. My latest incident was when power was lost during one of the big snow storms. Print jobs hang when going trough Time Capsule (wired or wireless) but are fine if plugged into computers USB port. I have resolved this issue before by following similar steps outlined above, but the solution seem to be hit or miss.

Airport Extreme and Express not working with Leopard

Both Exreme and Express appeared on Disk Utilty as "green" and worked with Tiger, after I installed new OS Leopard neither appears and cannot connect wirelessly.
What's up? TOM

Although the Upgrade path is touted as the "simplest" if may be the most troublesome if your Mac had a lot of third-party applications running on it prior to upgrading. Unfortunately, it's too early to offer much advise on what may have gone wrong with your AirPort connectivity. My guess, at this time, is that you may have some corrupted AirPort configuration files in your System folder.
Do you, by chance, have a clone backup of your previous disk? If so, it might be worth the trouble to return your Mac to its previous configuration, and then, try upgrading using the "Archive and Install" method. This will ensure a "clean" copy of Leopard, and just transition your user settings as appropriate. You may also want to post in the new Leopard Discussions area as well.

Canon MP830 scanner does not work with Leopard

Hi,
I have a Canon MP830. The printer function works fine but the scanner function does not work anymore since I've installed Leopard. From time to time it seems to work, randomly, ... but most of the time, if I use the MP830 navigator software and try to scan in a batch (from the tray), I get an error message saying "Het scannen is mislukt" (dutch for: Scanning process failed).
I hope that Apple and/or Canon are working on updated drivers because this is quite annoying... Plenty of fancy features in Leopard, but the easy, all-day features don't work
This is maybe not the right place to mention this comment but:
After I've installed iCal, it crashes everytime (randomly) when i click on the details of a calendar item... and generates an error message report... I can imagine I am not the only one who has this problem. Never had this before when using Tiger.
Regards,
F.

Actually, Canon has been providing various updates throughout the month of November. Go to www.canonusa.com, place your cursor over "downloads" and when a drop down menu is presented, click on "consumer." You might have to be patient, the site has been slow lately. Anyway, click on the pull downs in the middle of the page to select your printer. When the next page is presented, select MAC OS X from the pull down menu and you'll see the drivers and updated applications.
Over the weekend, I purchased an MP610. After performing the installation of files from the CD, I then downloaded and installed drivers and applications and the printer seems to work just fine, to include scanning, copying, etc.
Hope this helps,
Jimmy

Airport extreme card not working with leopard / G5

I just upgraded my PowerMac to leopard (G5 dual 1.8, 3 gigs of ram, 250 GB HD). I bought it new in December 2004 from apple. Previously I had been using a USB adapter to connect to my wireless internet at home (Linksys WRT54G). This device does not support leopard so I got an airport extreme card from gainsaver.com.
The Airport extreme card is configured properly as far as I know but it will only connect to my network for about 5 seconds then it drops. The USB adapter worked perfectly in the same spot and my macbook right next to it works fine as well.
1. Could it be a bad Airport extreme card?
2. Is this a known issue? And possibly be resolved with the 10.5.2 update?
It is a fresh Leopard install with no updates as I can not connect it to the internet to get them. Any help would be very much appreciated.
Message was edited by: anthonylkelly

Hi, I have the same machine (4 ram slots?) have you got the connector for the aerial that connects to the motherboard attached to your airport card. Mine works a treat.

Adium and Yahoo instant messenger contact lists not working with Leopard

After I installed Leopard, I tried to run Adium. When I tried to click on the icon and pop up my contact list to select a contact, nothing happens. I am now only able to receive messages and reply to received messages. I cannot get my contact list to pop up when clicking the icon in the dock (like I did with Tiger).
I had the same issue when using the latest Yahoo! messenger for Mac. Anyone else seeing this, or know of a fix?

Hello tross415 and welcome to the Palm forums.
What you are seeing is, if I recall correctly, a bug from Palm webOS 1.3.1 that has not yet been addressed. If you launch Messaging on the Pre, and then select Preferences & Accounts > Add IM Acoun you will not get a button to add a Yahoo! IM account.
The work around for this issue, and to add Yahoo IM support to your Pre is to add a Yahoo email or calendar account. When you do, the IM account will also be created. That is the process that worked for me when Palm introduced Yahoo IM support with webOS 1.3.1.
Hope that helps,
Alan G

HP LaserJet 2840 not working with Leopard (Wireless Printing)

I just upgraded to Leopard and my HP 2840 LaserJet Printer will no work. There is no Leopard driver and I have re-installed the software many times from the internet and from a CD. Im printing wirelesly with a Airport Extreme Base station (Last generation).

fixed

Printer not working with Leopard and Airport Express

Hello!
I have seen that this is a common problem but I've tried several solutions that seemed to work for others but still not for me.
I have a Macbook Pro unibody and airport express with OS X 10.5.6. I used a Samsung CLP-300 wirelessly though my airport express (with Tiger on my older macbook). The printer works fine when it is plugged into my USB on the Macbook but not on the airport.
Here is what I've tried in the past 8 months:
- update the Samsung printer driver
- used "fixairport"
- configured HP IP with airport local address
- spent 2 hours on the phone with apple
None of this seemed to work. The printer will print the first page and then any subsequent pages it gives me an error host message.
If anyone can give me an idea of what did work for them in this situation, or maybe I'm doing something wrong, please let me know. It would be greatly appreciated.
Steph

kelscan, Welcome to the discussion area!
You need to reconfigure your AirPort Express (AX) so that it joins the wireless network provided by the "modem". Follow the directions in KB 302153, AirPort Express: How to join an existing wireless network in client mode.

Cinema HD Not Working with Leopard Bootcamp

Seems like the same issue that tons of bootcamp beta users were getting with NVidia drivers, which is STILL happeneing in leopard (which I PAID $129 thinking it would fix issues).
When you plug a cinema hd monitor into the macbook pro, the maximum resolution available is 1024x768. Please FIX THIS ASAP! Just give us the new drivers!
I called technical support and got this... "unfortunately there's nothing I can do with windows". Please quit hiding behind that... Bootcamp is no longer free, it's now a feature of leopard. Sorry you marketted it that way, but now you have to support it. Give me a break...
(Sorry for the frustration, but I've been waiting a while to get this working)

I have the same problem, MAC please put a notice on your leopard OS website letting people know that if you spent the money to buy Cinema HD then you won't be able to see it in its maximum resolution if you upgrade to leopard... and also put a date on when you are expecting to release a fix / driver.... I'm running bootcamp as well....

Contribute CS3 not working with Leopard

Hi,
Ever since I loaded Lopard onto my Mac - Contribute won't
connect to any of my websites.
Says it can't connect 'because the server is down or not
accepting connections.'
Is anyone else having this issue - and does anyone know the
cure?
I've re-installed - but still won't work.
Thanks,
- Greg

This issue has been reported couple of time in this thread, i
was able to get the site info twice from the users and for one site
it was not connecting from the Tiger itself because of the site
issue and for the next one it was working from the 3 leopard test
machines we tried.
We have tested Contribute CS3 on Leopard and it works fine.
In case if the user is hitting any issue then it is important to
reproduce it then only we nail it down.
I do understand that you may not like to give the information
and for that only the second option is:
1. One test folder inside the site
2. One test role and a test user under the same role
3. Provide the access to the user only to that folder by
administering the site -> Select the role->Edit Role
settings->Folder File Access->Only allow editing within these
folders -> Add the test folder in the list
In this case i will be having the access to only one
particular folder which you can very well delete later on.

Illustrator CS not working with Leopard!!!

I am experiencing problems after I installed Illustrator CS on Leopard. Anyone else experience this?
Also when I save an Illustrator file as a PDF file the letters of some fonts show up as a box with an "X" in the middle.
Please Help!

The fonts are probably missing the printer fonts as they must be Type 1

FCP not working with Leopard

Similar Messages

Maybe you are looking for