FCP on PBG4 - Here's the plan
So, my upgrade to FCE4 (from FCE3) didn't go as well as planned. I thought I'd be able to work on a sequence in FCE4, then move to FCP6 and finalize it. (I have access to a Mac Pro with FCP6, but only on occasion). I found out that FCP6 won't read FCE4 sequences because FCE4 is too new.
So, how about this plan: Buy and install FCP6 on my aging PB G4 (1.67, 2gbs ram). Then I can work on the sequences (albeit slowly), and move the sequence to the Mac Pro when I'm ready for heavier lifting and finalization (Motion, Color, Compressor, etc.).
AND, when I upgrade to a MacBook Pro in the coming months, I can just reinstall FCP6 there, right?
So, does that make sense, or am I missing something? (Like, it won't translate well from PB to Mac Pro, or something).
Your plan will probably work, your powerbook is underpowered for FCP 6 as you know.
But if you can get it installed (the video card is the limiting factor, I believe), you should be able to limp along.
You will want all your media on an external hard drive (firewire, 800 if the PB has it). (you didn't mention your format, hopefully dv).
Get that new Macbook Pro asap. and yes it will install just fine on that. Get lots of RAM (quality 3rd party)
Similar Messages
-
I changed my data plan from 6g to 8g while my daughter who attends college outside of the US at Toronto Canada (and we have on a international calling and international data plan) was on spring break at her grandparents house here in the US. I made the change online since I had been waiting on the phone for over 10 minutes for a customer service rep to come available. Well when I made the change online since that seems to be the thing that Verizon wants it's customers to do and I didn't see all the different plans available and just did the upgrade to 8g. Next bill had over $900 in roaming charges on her phone line. I called the 1-800 number and waiting for a service rep and after 20 minutes of waiting and being put on hold was told it was the customers mistake and there was nothing they could do.Thanks for nothing. I called back after thinking about it and wondered why changing a data plan for the phones in the US would change a international call plan. Waiting over 10 minutes again between waiting for a service rep and hold for one to answer the call. Gave her all the information about it and she said she would call back. Well, 4 days later over the weekend she had nevered called back. So on the phone again for the third time and after 20 plus minutes again was told that when I did it online I click the plan that didn't include international call only the data plan. Explained that I never saw the difference in the plan packages so put on hold again and was told that they could credit $100 to my bill. Wow, thanks alot !!! We have been Verizon customers for probably atleast 12 years and this is how you treat your long term customers?
Verizon Wireless Customer Support wrote:
AHARDY454,
We definitely want to review options on what has happened. We are now connection, so you can hover over my username and send me a Direct Meesage so we can review your account information. We look forward to reviewing.
Thank you,
TonyG_VZW
Follow us on Twitter @VZWSupport
TonyG_VZW they can't exactly hover over your username unless you actually link it in your post. The generic username for all the reps just doesn't fly. -
I Want to Buy MacBook Pro 15" In Installments Can Anyone Here Tell me The Plans Of Installments
I Want to Buy MacBook Pro 15" In Installments Can Anyone Here Tell me The Plans Of Installments... Please Give Me Proper Information With Interest..
Thanks In AdvanceHello,
Apple offers a Barclay's VISA card that provides 6-12 months at 0% interest on your first purchase from Apple. You can even sign up for the card & get approved at the same time that you place your order.
If your purchase is under $999 USD you get 6 months at 0% interest. If more than $999 you get 12 months at 0% interest. As long as you make the minimum payment on time every month you continue at 0% until the promotional period runs out.
Note: if any payment is late or you don't pay off the balance within the promotional period, you get charged all the interest that accrued from day one; as of today that rate is over 22%, so it is important to make all your payments on time and pay off of the full balance before the end of the promotional period.
Last year I applied for the card at the same time I ordered my iMac; got approved immediately; and then set up an automatic payment every month with Barclays so I wouldn't risk being late; and then I paid off the remaining balance 30 days before the end of the promotional period. Everything went smoothly, Barclays' online system worked perfectly; they did not play any billing tricks nor did they ever spam me with junk promotions. Recently they offered another 12 months at 0% financing, so it's not just a one time offer!
Your profile doesn't say where you are located, so if you are outside the USA you will need to check the Apple website for your country to see if there is a similar financing offer in your location. -
Hi good day, I want to unlock my iPhone because I'm planning to go in overseas here is the IMEI no: 01 304 800 206 399 Hi good day, I want to unlock my iPhone because I'm planning to go in overseas here is the IMEI no: 01 304 800 206 399 2
Well your in the wrong place to do this.
In order to have your phone unlock, you will need to contact the carrier that the phone is locked to only the carrier is authorized to unlock the phone. -
Can I upgrade a FCP4 purchased in UK to FCP Studio 5.1 here in the USA
I've noticed in the fine print of Apple's FCP Studio 5.1 upgrade form that they say the item being upgraded must have been purchased in USA or Canada. This is from the USA web site.
http://www.apple.com/universal/crossgrade/
I live in USA. So if I purchase a UK version of FCP4 (via ebay), will I be able to upgrade it to FCP Studio here in the US? Or, will I be forced to somehow upgrade it via the UK Apple site and sending the original discs back to the UK?
Anyone try this and knows for sure how it works?Thanks Jerry,
I took your advise and called Apple (don't know why I didn't think of that!). They switched me around about 5 time to different departments and finally handed me over to the FC Crossgrade folks (1-888-840-8433) who basically told me "no". They suggested I call the UK Apple FC Crossgrade folks and see exactly how I'd upgrade this from them while living in the USA.
Thanks for your reply and help.
Subala -
Two questions.1)If I plan to buy an unlocked iPhone 5 from Canada will the 4G work in Egypt although mobile operators haven't launched it yet? 2)Once the iPhone 5 is launched here,will the unlocked iPhone that i purchased from Canada work?
Sarah.Efat wrote:
Two questions.1)If I plan to buy an unlocked iPhone 5 from Canada will the 4G work in Egypt although mobile operators haven't launched it yet?
More than likely, no.
2)Once the iPhone 5 is launched here,will the unlocked iPhone that i purchased from Canada work?
Yes. -
Executing the planning function while opening the web interface
hello all,
I have created a planning area based on multiprovider.This multiprovider is based on two transactional cube ie,COPA cube and Cost Center cube.
This planning area is meant for enabling integrated planning.One plans in COPA cube and other plans in Cost Center cube the income statement gets planned based on this two.
I selected planning items in multiprovider layout to display the income statement.The layout is as follows:
<b>PlanningItem</b> <b>Amount</b>
Net Sales<b>:</b> 9.000,00 INR (This comes from COPA)
Sales Overheads<b>:</b> 200,00 INR (This comes from Cost Center)
Depreciation<b>:</b> 200,00 INR (This comes from Cost Center)
Other Expenses<b>:</b> 300,00 INR (This comes from Cost Center)
EBIT<b>:</b> 0,00 INR
Interest Income<b>:</b> 0,00 INR
Interest Expense<b>:</b> 0,00 INR
Operating Income<b>:</b> 0,00 INR
Taxes<b>:</b> 0,00 INR
Now EBIT planning item is to be calculated from the planning items as follows:
EBIT = Net Sales-Sales Overheads-Depriciation-Other Expenses
For this i have created a planning function which calculates EBIT.This function works properly,there are no issues in it.
My problem is that i want this function to be executed as soon as i open the web interface for my planning application and the result should be as follows:
<b>PlanningItem</b> <b>Amount</b>
Net Sales<b>:</b> 9.000,00 INR (This comes from COPA)
Sales Overheads<b>:</b> 200,00 INR (This comes from Cost Center)
Depreciation<b>:</b> 200,00 INR (This comes from Cost Center)
Other Expenses<b>:</b> 300,00 INR (This comes from Cost Center)
EBIT<b>:</b> 8.300,00 INR
Interest Income<b>:</b> 0,00 INR
Interest Expense<b>:</b> 0,00 INR
Operating Income<b>:</b> 0,00 INR
Taxes<b>:</b> 0,00 INR
Can anybody suggest how to go about this problem?
Thanks in advance.
regards,
YogeshHi Yogesh,
as far as i know, there is no standard functionality for that purpose, but there are workaround for it.
1. Modify the BSP Application.
Go to SE80 --> Repository Browser --> BSP Application --> your WI name --> page with flow logic --> double click on page1.htm --> Event handler tabstrip --> on the drop down selection press F1 --> add a function module that call you BPS function in specific event (e.g: OnInitialization).
2. Use WI-Exit Class / WI-Extention (ABAP OO).
Here you need to create sub class from Class: CL_UPWB_BSP_APPL, and assign the class to your WI. You can then add a function module that call you BPS function in method:
2.1. Load --> performed only once on intial execution of WI.
2.2. Initialisation --> called once for each server response.
2.3. Dispatch --> called at each action and also for each WI component.
You can see further information in SAP how to paper:
How to Validate manual input in WEB planning application, New BPS-Features delivered with SAP BW 3.5, etc.
You can call your BPS function with BPS API FM (See F.Group: UPC_API)
But there is also more easier way to realize your ebit calculation. If you define your EBIT calc. manually in layout (define with manually defined Lead column). With this way, You will always get your EBIT analog with inputed values.
Then you add your EBIT calc.function to Layout Component in WI in property: 'Function After Data Change'.
Best Regards,
Suan Liono -
How do I get the plan and prices I was promised?
My husband and I have been T-Mobile customers for 12 years. But with this new "no contract" thing they're doing (whereby one pays full price for a new device, the perk supposedly being that one does not have to re-up for another two years), we decided we just couldn't stay. We were paying $150/month for unlimited talk, text, and data--but in one last attempt to get us to stay, they offered us a discount on data that would have brought our bill down to $130/month.
So on Thursday, July 24, I called the Verizon sales line (800-813-3334) and talked to a very nice sales rep named Pamela (she goes by Pam). Pam told me we could get iPhone 5Ss for $99.99 each, and that if we got unlimited talk and text with a two-year agreement, they could throw in 2g/month of data for free. If I bought an additional 2g of data per month (we have literally never used more than 4g per month, so that was fine), our bill would come to $130/month. Perfect! Exactly what T-Mobile had offered us, but with FAR cheaper phones.
I told Pam I would need to talk it over with my husband, and asked if any of these offers were going to expire in the next few days--she said no. I then asked if I had to call her back directly to get these offers, and she said no to that too, but gave me her direct extension just in case.
It took us a week to look at other plans, call other service providers, etc., so it wasn't until Thursday, July 31 that I was able to call Pamela back. I got her voicemail and left her a message. Two days later (Saturday, August 2) I hadn't heard back from her (which I thought was odd, given that I made it clear in my message that I wanted to switch to Verizon), so I called and left another message. I waited a couple of hours and then, getting impatient, decided to just call the general sales line (without using her extension) and take my chances.
Whaddya know, I happened to get Pam! I told her about the messages I'd left, and she told me--get this--that she didn't call me back because her voicemail hasn't been working for the past couple days. (Um. You work for a PHONE COMPANY. How can your voicemail be down?!) Anyway, I said I was calling to double check the prices she had quoted me on the iPhones. She said that promotion had ended "on the 17th" (keep in mind that I called her for the first time on the 24th. Did she really quote me prices from a promotion that had already been over for a week?!), but that we should be able to go into a store in person and get it that way.
While I had her on the phone, I also checked to be sure that the 2g/month of free data promotion was still on the table. She assured me it was, and that it was a "back to school" promotion and probably wouldn't end until late August or early September. Excellent.
Armed with these promises, the hubby and I went to the Verizon store in a nearby mall. When I told them we expected iPhone 5Ss for $99.99, I got blank stares. To their credit, they offered the same price in a slightly roundabout way: if we paid the current price ($199) that day, we could get half back in a rebate on August 7. Fine (although, at this point, I'll be surprised if I actually get it, but that's a battle for another day). I then told them about the 2g/month free offer Pam had promised. More blank stares. The sales guy (Soto--really nice guy) asked for Pam's number and extension, told us he was going to call her and try to get the promotion code, and suggested we take a stroll around the mall while we wait.
When we got back to the store, Soto had tried Pam's extension "8 or 10 times" and only gotten her voicemail, so couldn't get us the free data. We went with the cheaper plan anyway--2g/month--so that our bill would stay at $130, along with his suggestion that we try calling Pam again today to get the free 2g added on after the fact.
I don't know why I should be surprised, but I only got Pam's voicemail again. After leaving a message, I called the general sales line back and got Dmitri. He had, predictably, never heard of the 2g free promotion, even after putting me on hold and "looking everywhere he could think to look." He offered to put me in touch with customer service, who may be able to contact Pam directly to get whatever code she was talking about and get me the 2g/month free I was promised. The rep I was connected with (whose name I'm afraid I have forgotten) listened to my story, put me on hold while she tried Pam's extension, and came back to tell me that she, too, had left a message. Meanwhile, she was able to give me 1g/month free for 1 months, which is a start, but not as much as I need.
One thing she did say--and this REALLY ****** me off--was that perhaps the reason why Pam isn't calling me back is that she doesn't have the code that would get me the 2g free, and doesn't want to have to tell me. If that is true, WHAT KIND OF CUSTOMER SERVICE IS THAT?!?!
So Pam, if you're listening, please get back to me and give me the 2g/month free data you promised me. And if you don't have the right code, talk to your boss--and their boss, and their boss, and their boss--until you can get me what you promised me. Because if I left T-Mobile for some mythical data plan that doesn't exist, I'm going to be REALLY ****** off. I think if that's the case, Verizon should just let me out of my 2-year contract and let me go back to T-Mobile. They may not be the best, but (with me, anyway) they have always done what they said they would.Hello Snosilla! I'm so sorry for all the confusion and for all the time taken to activate service with us! I do see that the iPhone 5c is $99.99 right now. The iPhone 5s is actually $199.99. There's no need to call Pam anymore, we can take over from here.
I've followed you in the forums. Please accept me, and follow me back. Then, send me a Direct Message and I can look into this for you. If you do not have an active line yet, I may need to get you through to our activations department, but I will do all I can!
Thank you!
ChristinaB_VZW
VZW Support
Follow us on Twitter @VZWSupport
VZW Support -
I want to get off the plan start a new account but can't contact account owner
Hi,
My brother and I have been on the "NATIONWIDE TLK&TXT SHARE 700" plan and the account owner is a friend of our family.
I have almost fulfilled my two year contract (it will be over in about 1 month) and we would like to upgrade to a new Iphone and put my name as the account owner (none of us had enough credit by the time we got these phones from Verizon, but now we are able to pay our bills and would like to be responsible and keep privacy).
I've noticed that in order to accomplish AoL, curruent account owner needs to call Verizon and authorizes the account transfer, but the problem is, I haven't been able to contact her for a month(she won't answer the phone and no call back has been received...).
So I was thinking I should just give up keeping my number and start a new contract and a plan with my brother.
My question is, as just an account member (not owner or manger), can my brother and I get off the plan without owner's permission? She and I are not on the same plan and she actually gave me some kind of password so that I could manage some stuffs with customer service. I was actually able to cancel my mother's line from the family plan one year ago with that password , but I wonder if I could do the same thing with both my brother's and my lines without owner's permission.
If I can do that, is there any way to keep my numbers when starting a new account without having current account owner involved since I can't reach her?
If I start a new account and a plan with my brother and get the phone with 2-year-contract, rather than just upgrading to an iphone (while keeping my number under the current account owner like now), how much money will I be losing? Would it be a lot?whatwhywhere wrote:
My question is, as just an account member (not owner or manger), can my brother and I get off the plan without owner's permission? She and I are not on the same plan and she actually gave me some kind of password so that I could manage some stuffs with customer service. I was actually able to cancel my mother's line from the family plan one year ago with that password If you were able to do this, then you must be an account manager
, but I wonder if I could do the same thing with both my brother's and my lines without owner's permission.
If I can do that, is there any way to keep my numbers when starting a new account without having current account owner involved since I can't reach her? If you are an account manager, I would think you should be able to accomplish this. You should call *611 or go into a Verizon store to find out.
If I start a new account and a plan with my brother and get the phone with 2-year-contract, rather than just upgrading to an iphone (while keeping my number under the current account owner like now), how much money will I be losing? Would it be a lot?
If you start a new Family Plan with 2 lines instead of remaining part of a Family Plan with 3(or more) lines, you could end up paying more. Not knowing what your arrangement is, though, we cannot begin to tell you how much more you would be paying.
For example:
700 minute Family Plan with unlimited texting for 2 lines would be $99.98/month + tax for a total of ~$50/person.
700 minute Family Plan with unlimited texting for 3 lines would be $109.97/month + tax for a total of $37/person.
Any add ons such as insurance, data, etc... would of course be extra. You may also have to pay a security deposit in addition if you do not have much of a credit history. -
How can I use the iPhone i bought here in the US in the philippines?
i have an iphone and i was just wondering how can i can use the iphone i bought here in the united states to the philippines? is it even possible? please help me. thanks!
Yes, but extremely expensive - get an international roaming plan from AT&T.
If you mean use it with a local carrier, then no - all iPhones sold in the US are carrier-locked to AT&T. You're better off selling the phone to someone in the US and buying one in the Philippines. -
As the title says:
I purchased a Droid Maxx at full retail price (approximately $540) to keep my grandfathered unlimited data. An unauthorized/illegal change was made by my younger sister (who is not an account manager and stole the information from my mom) to the plan and I was not notified within the 14-day closing period to revert the changes. For the record, both my mom and I are account managers, my younger sister is not.
I went in to my account (and changed all the information) and found out that when changes are made to the account online, you have to send an authorization text to one of the phones--however, you can send this authorization to ANY of the phones on the plan, so my sister sent it to hers (instead of an account managers).
So, the only reason I found out about this change to my plan was via a text message telling me I was "approaching max data," which of course should not happen with unlimited data. My younger sister did not tell anyone she made the changes.
When I found out about two (nearly three) weeks ago, I called Verizon to open a ticket about it. They did, said they would call/text me back a few days later--they didn't. One week later I made another phone call to see what the status on that ticket was--the rep said that the other rep was supposed to call me, but didn't, and so he pushed the ticket again. Lo and behold, another week later, still no response from VZW about the ticket. So I called again only to find out that the request to revert the data plan back to unlimited had been denied.
I spoke with that representative for nearly 40 minutes and all she could offer was some unwanted advice about what to do about my sister's behavior or that "I'm so sorry that someone would do that." I told her I wasn't looking for consolation, but for a compromise on either getting my unlimited data back, or refunding the difference between contract and full-retail price of the phone. I threatened to leave VZW because of this and all she could offer was a measly $20 credit.
I have filed a BBB complaint against Verizon Wireless for this issue as an illegal change that goes unnoticed past the 14-day closing period should be addressed in a more urgent manner.
I have also reached out on Reddit and Twitter, because obviously calling the VZW support does nothing to alleviate my situation. I am very dissatisfied with how VZW is handling an illegal and fraudulent change on my account that has shafted me out of 500 dollars.You seam to be focusing your anger at Verizon and not your sister. Verizon followed the rules and required IDs and passwords to access the wireless account. You and/or your mother are supposed to safeguard that information. Your sister has committed the felony by stealing your mothers identity for personal gain.
You say "I am very dissatisfied with how VZW is handling an illegal and fraudulent change on my account that has shafted me out of 500 dollars.' My question to you is who made the illegal and fraudulent change to your account? Verizon or your sister? Keeping in mind your sister had all the correct IDs and passwords,
I'm sure if you went to Verizon and wanted to make some changes to your account, and you had the correct IDs and passwords, you would be upset and angry if they put you through the 3rd degree because they thought you were committing fraud.
Good luck to you, (seriously) whatever happens, -
Compensation Planning - Error while doing the planning for Employee
Hi Friends,
We have implemented standard MSS Business package.
Line Mangers are using the Compensation Planning Iview and are facing errors while sending it for further approvals.
In the steps.
In the last step they get RFC_ERROR_SYSTEM_FAILURE.
A critical error has occurred. Processing of the service was terminated.
Access via NULL Object reference not possible.,error key : RFC_ERROR_SYSTEM_FAILURE.
Also to note that while doing the planning we get " No budget Data available"
Is budget data mandatory to complete planning. However in test systems we were able to run the complete cycle even without the budget data we were able to complete one cycle.
Kindly advise .
Thanks
SantoshHello..
This might point to an unhanded exception. There should be a backend dump (ST22) available and that would help in more analysis. You might need a ABAPer to look into the dump. You may paste the dump here for more analysis. -
What is the significance of having a compound master data in the planning levels?
In "SAP2" model there is PERPRODCUST as a planning level.
This planning level has PERIOD, PRODUCT, CUSTOMER and PRODUCT-CUSTOMER master data as part of the planning level.
Wouldn't PERIOD, PRODUCT, CUSTOMER be sufficient? Why is the compound master data required to be added to this planning level.
Could someone clarify this for me.
Thank you.I'll attempt:
It depends on if you want to surface the result/value of the compound master data type on the key figures in your planning level. If you do then you'll need to include it in the planning level.
If the question is why would I want a compound master data type, then my attempt at that answer is as follows:
From my understanding, the idea of a compound key figure is that you are able to derive an attribute or attributes that are related to, in this case, two master data types - all without having to 'store' that attribute on the transactional record.
Here is a simplistic example:
Master data on PRODUCT (where PRODID is the key)
PRODID,PRODDESCR,PRODSIZE
P1,Widget A,Big
P2,Widget B,Big
P3,Widget C,Small
P4,Widget D,Small
Master data on CUSTOMER (where CUSTID is the key)
CUSTID,CUSTDESCR,CUSTREGION
C1,Store A,West
C2,Store B,West
C3,Store C,East
C4,Store D,East
Master data on compound MDT PRODUCT-CUSTOMER (where PRODID and CUSTID are the key)
PRODID,CUSTID,SALESREGION
P1,C1,BIG_WEST
P1,C2,BIG_WEST
P1,C3,BIG_EAST
P1,C4,BIG_EAST
P2,C1,BIG_WEST
P2,C2,BIG_WEST
P2,C3,BIG_EAST
P2,C4,BIG_EAST
P3,C1,SMALL_WEST
P3,C2,SMALL_WEST
P3,C3,SMALL_EAST
P3,C4,SMALL_EAST
P4,C1,SMALL_WEST
P4,C2,SMALL_WEST
P4,C3,SMALL_EAST
P4,C4,SMALL_EAST
Finally you have some transactional data for the Key Figure on the planning level (ex: Sales)
PRODID,CUSTID,SALES
P1,C1,10
P3,C4,15
P4,C3,30
P1,C3,20
P2,C2,15
*Note that you don't need to 'store' the sales region attribute on the record
Then on your report, you can pick the SALESREGION and get your aggregated values:
SALESREGION,SALES
BIG_WEST,25
BIG_EAST,20
SMALL_WEST,0
SMALL_EAST,45 -
Hi Everyone,
I've scoured the forums, as well as external sites, but not finding a solution.
Tried tech support, their ideas didn't pan out. Would greatly appreciate some guidance.
Every time I try to use VPE, the resulting mesh is fine (the dxf), but the PNGs
do not match the drawn planes at all.
For example, I'll use a file from wikimedia. (all images re-compressed for the forum)
I draw the right wall, make sure it is blue, then pull the floor.
Pull the floor and the left wall.
Pull the back ground (hard to see in the compressed image, but it is there).
Pull the ceiling.
The completed planes. Right wall was drawn, remaining were each
pulled out the of the previous plane. All blue. Entire image is covered.
Importing the VPE into After Effects CC. Note the wonky textures.
Here are the actual textures (original PNGs compressed into JPEG for posting).
This is the background piece, note how the section of the image doesn't align at
all with the plane I drew.
Hope this issue is clear to all. The mesh looks fine to me, just the PNGs are off.
I've successfully used the Vanishing Point filter extensively in previous versions of Photoshop.
I'm currently using Photoshop CC on OSX 10.8.4 running on a 15" PowerBook Retina.
I've tried the following to no avail:
differing JPEGs
drawing the floor first
drawing the first surface counter-clockwise and clockwise : )
ensured all planes are blue
disabled graphics acceleration under prefererences
completed uninstalled Photoshop and reinstalled with clean performance/preference settings (did not import any previous settings).removed the "Adobe Photoshop CC Settings" folder as well.
Tried exporting a DXF, again mesh looks great, textures are wrong.
Ideas are appreciated because right now, I'm stuck : )
System Info below:
Adobe Photoshop Version: 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00) x64
Operating System: Mac OS 10.8.4
System architecture: Intel CPU Family:6, Model:58, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 4
Logical processor count: 8
Processor speed: 2600 MHz
Built-in memory: 16384 MB
Free memory: 9045 MB
Memory available to Photoshop: 14117 MB
Memory used by Photoshop: 70 %
Image tile size: 1024K
Image cache levels: 4
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
OpenCL Version: 1.2 (Apr 25 2013 18:32:06)
OpenGL Version: 2.1
Video Rect Texture Size: 16384
OpenGL Memory: 992 MB
Video Card Vendor: NVIDIA Corporation
Video Card Renderer: NVIDIA GeForce GT 650M OpenGL Engine
Display: 1
Main Display
High DPI Monitor
Display Depth: 32
Display Bounds: top=0, left=0, bottom=900, right=1440
Video Renderer ID: 16918087
Video Card Memory: 1024 MB
Serial number: 90970592741803664300
Application folder: /Applications/Adobe Photoshop CC/
Photoshop scratch has async I/O enabled
Scratch volume(s):
Macintosh HD, 373.3G, 65.1G free
Required Plug-ins folder: /Applications/Adobe Photoshop CC/Adobe Photoshop CC.app/Contents/Required/
Primary Plug-ins folder: /Applications/Adobe Photoshop CC/Plug-ins/
Installed components:
adbeape.framework adbeape 3.4.0.29366 0.1160850
AdbeScriptUIFlex.framework AdbeScriptUIFlex 6.3.2.30746 79.535742
adobe_caps.framework adobe_caps 7.0.0.21 1.248010
AdobeACE.framework AdobeACE 2.20.02.30665 79.535293
AdobeAGM.framework AdobeAGM 4.30.19.30830 79.536232
AdobeAXE8SharedExpat.framework AdobeAXE8SharedExpat 3.7.101.18636 66.26830
AdobeAXEDOMCore.framework AdobeAXEDOMCore 3.7.101.18636 66.26830
AdobeBIB.framework AdobeBIB 1.2.03.30665 79.535293
AdobeBIBUtils.framework AdobeBIBUtils 1.1.01 79.535293
AdobeCoolType.framework AdobeCoolType 5.13.00.30665 79.535293
AdobeCrashReporter.framework AdobeCrashReporter 7.0.1
AdobeExtendScript.framework AdobeExtendScript 4.5.5.30746 79.535742
AdobeJP2K.framework AdobeJP2K 1.2.2.29712 79.248139
AdobeLinguistic.framework 19061
AdobeMPS.framework AdobeMPS 5.8.1.30604 79.535029
AdobeOwl.framework AdobeOwl 5.0.13 79.533484
AdobePDFL.framework AdobePDFL 10.0.1.30505 79.499517
AdobePDFSettings.framework AdobePDFSettings 1.4
AdobePIP.framework AdobePIP 7.0.0.1768
AdobeScCore.framework AdobeScCore 4.5.5.30746 79.535742
AdobeUpdater.framework AdobeUpdater 6.0.0.1452 "52.338651"
AdobeXMP.framework AdobeXMPCore 79.151481 79.151481
AdobeXMPFiles.framework AdobeXMPFiles 79.151481 79.151481
AdobeXMPScript.framework AdobeXMPScript 79.151481 79.151481
ahclient.framework ahclient 1.8.0.31
aif_core.framework AdobeAIF 5.0.00 79.534508
aif_ocl.framework AdobeAIF 5.0.00 79.534508
aif_ogl.framework AdobeAIF 5.0.00 79.534508
AlignmentLib.framework xcode Copyright © 2013 Adobe Systems Incorporated
amtlib.framework amtlib 7.0.0.169
boost_date_time.framework boost_date_time 7.0.0.0
boost_signals.framework boost_signals 7.0.0.0
boost_system.framework boost_system 7.0.0.0
boost_threads.framework boost_threads 7.0.0.0
Cg.framework NVIDIA Cg
CIT.framework CIT 2.1.6.30158 151334
CITThreading.framework CITThreading 2.1.6.30158 151334
dvaaudiodevice.framework dvaaudiodevice 7.0.0.0
dvacore.framework dvacore 7.0.0.0
dvamarshal.framework dvamarshal 7.0.0.0
dvamediatypes.framework dvamediatypes 7.0.0.0
dvaplayer.framework dvaplayer 7.0.0.0
dvatransport.framework dvatransport 7.0.0.0
dvaunittesting.framework dvaunittesting 7.0.0.0
dynamiclink.framework dynamiclink 7.0.0.0
FileInfo.framework FileInfo 79.151561 79.151561
filter_graph.framework AdobeAIF 5.0.00 79.534508
ICUConverter.framework ICUConverter 3.61 "gtlib_3.0" "." "16615"
ICUData.framework ICUData 3.61 "gtlib_3.0" "." "16615"
LogSession.framework LogSession 2.1.2.1756
mediacoreif.framework mediacoreif 7.0.0.0
patchmatch.framework AdobePatchMatch 1.1.00.1 1.
PlugPlugOwl.framework PlugPlugOwl 4.0.1.34
UpdaterNotifications.framework UpdaterNotifications 7.0.1.102 "7.0.1.102"
WRServices.framework
Required plug-ins:
3D Studio 14.0 20130423.r.221 2013/04/23:23:00:00 ©2006-2013 Adobe Systems Incorporated - from the file “U3D.plugin”
Accented Edges 14.0, Copyright © 1991-2013 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Adaptive Wide Angle 14.0, Copyright © 2013 Adobe Systems Incorporated - from the file “Adaptive Wide Angle.plugin”
Angled Strokes 14.0, Copyright © 1991-2013 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Average 14.0 20130423.r.221 2013/04/23:23:00:00 ©1993-2013 Adobe Systems Incorporated - from the file “Average.plugin”
Bas Relief 14.0, Copyright © 1991-2013 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
BMP 14.0, Copyright © 2003-2013 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
Camera Raw 8.1 (43), Copyright © 2013 Adobe Systems Incorporated - from the file “Camera Raw.plugin”
Camera Raw Filter 8.1 (43), Copyright © 2013 Adobe Systems Incorporated - from the file “Camera Raw.plugin”
Chalk & Charcoal 14.0, Copyright © 1991-2013 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Charcoal 14.0, Copyright © 1991-2013 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Chrome 14.0, Copyright © 1991-2013 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Cineon 14.0 20130423.r.221 2013/04/23:23:00:00 ©2002-2013 Adobe Systems Incorporated - from the file “Cineon.plugin”
Clouds 14.0 20130423.r.221 2013/04/23:23:00:00 ©1993-2013 Adobe Systems Incorporated - from the file “Clouds.plugin”
Collada DAE 14.0 20130423.r.221 2013/04/23:23:00:00 ©2006-2013 Adobe Systems Incorporated - from the file “U3D.plugin”
Color Halftone 14.0, Copyright © 2003-2013 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
Colored Pencil 14.0, Copyright © 1991-2013 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
CompuServe GIF 14.0, Copyright © 2003-2013 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
Conté Crayon 14.0, Copyright © 1991-2013 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Craquelure 14.0, Copyright © 1991-2013 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Crop and Straighten Photos 14.0 20130423.r.221 2013/04/23:23:00:00 ©2003-2013 Adobe Systems Incorporated - from the file “CropPhotosAuto.plugin”
Crop and Straighten Photos Filter 14.0, Copyright © 2003-2013 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
Crosshatch 14.0, Copyright © 1991-2013 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Crystallize 14.0, Copyright © 2003-2013 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
Cutout 14.0, Copyright © 1991-2013 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Dark Strokes 14.0, Copyright © 1991-2013 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
De-Interlace 14.0, Copyright © 2003-2013 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
Dicom 14.0, Copyright © 2003-2013 Adobe Systems Incorporated - from the file “dicom.plugin”
Difference Clouds 14.0 20130423.r.221 2013/04/23:23:00:00 ©1993-2013 Adobe Systems Incorporated - from the file “Clouds.plugin”
Diffuse Glow 14.0, Copyright © 1991-2013 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Displace 14.0, Copyright © 2003-2013 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
Dry Brush 14.0, Copyright © 1991-2013 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Eazel Acquire 14.0 20130423.r.221 2013/04/23:23:00:00 ©1997-2013 Adobe Systems Incorporated - from the file “EazelAcquire.plugin”
Embed Watermark NO VERSION - from the file “DigiSign.plugin”
Entropy 14.0 20130423.r.221 2013/04/23:23:00:00 ©2006-2013 Adobe Systems Incorporated - from the file “statistics.plugin”
Extrude 14.0, Copyright © 2003-2013 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
FastCore Routines 14.0 20130423.r.221 2013/04/23:23:00:00 ©1990-2013 Adobe Systems Incorporated - from the file “FastCore.plugin”
Fibers 14.0, Copyright © 2003-2013 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
Film Grain 14.0, Copyright © 1991-2013 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Filter Gallery 14.0, Copyright © 1991-2013 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Flash 3D 14.0 20130423.r.221 2013/04/23:23:00:00 ©2006-2013 Adobe Systems Incorporated - from the file “U3D.plugin”
Fresco 14.0, Copyright © 1991-2013 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Glass 14.0, Copyright © 1991-2013 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Glowing Edges 14.0, Copyright © 1991-2013 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Google Earth 4 KMZ 14.0 20130423.r.221 2013/04/23:23:00:00 ©2006-2013 Adobe Systems Incorporated - from the file “U3D.plugin”
Grain 14.0, Copyright © 1991-2013 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Graphic Pen 14.0, Copyright © 1991-2013 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Halftone Pattern 14.0, Copyright © 1991-2013 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
HDRMergeUI 14.0, Copyright © 2003-2013 Adobe Systems Incorporated - from the file “HDRMergeUI.plugin”
IFF Format 14.0, Copyright © 2003-2013 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
Ink Outlines 14.0, Copyright © 1991-2013 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
JPEG 2000 14.0 20130423.r.221 2013/04/23:23:00:00 ©2001-2013 Adobe Systems Incorporated - from the file “JPEG2000.plugin”
Kurtosis 14.0 20130423.r.221 2013/04/23:23:00:00 ©2006-2013 Adobe Systems Incorporated - from the file “statistics.plugin”
Lens Blur 14.0, Copyright © 2002-2013 Adobe Systems Incorporated - from the file “Lens Blur.plugin”
Lens Correction 14.0, Copyright © 2002-2013 Adobe Systems Incorporated - from the file “Lens Correct.plugin”
Lens Flare 14.0, Copyright © 2003-2013 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
Liquify 14.0, Copyright © 2001-2013 Adobe Systems Incorporated - from the file “Liquify.plugin”
Matlab Operation 14.0 20130423.r.221 2013/04/23:23:00:00 ©1993-2013 Adobe Systems Incorporated - from the file “ChannelPort.plugin”
Maximum 14.0 20130423.r.221 2013/04/23:23:00:00 ©2006-2013 Adobe Systems Incorporated - from the file “statistics.plugin”
Mean 14.0 20130423.r.221 2013/04/23:23:00:00 ©2006-2013 Adobe Systems Incorporated - from the file “statistics.plugin”
Measurement Core 14.0 20130423.r.221 2013/04/23:23:00:00 ©1993-2013 Adobe Systems Incorporated - from the file “MeasurementCore.plugin”
Median 14.0 20130423.r.221 2013/04/23:23:00:00 ©2006-2013 Adobe Systems Incorporated - from the file “statistics.plugin”
Mezzotint 14.0, Copyright © 2003-2013 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
Minimum 14.0 20130423.r.221 2013/04/23:23:00:00 ©2006-2013 Adobe Systems Incorporated - from the file “statistics.plugin”
MMXCore Routines 14.0 20130423.r.221 2013/04/23:23:00:00 ©1990-2013 Adobe Systems Incorporated - from the file “MMXCore.plugin”
Mosaic Tiles 14.0, Copyright © 1991-2013 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Multiprocessor Support 14.0 20130423.r.221 2013/04/23:23:00:00 ©1990-2013 Adobe Systems Incorporated - from the file “MultiProcessor Support.plugin”
Neon Glow 14.0, Copyright © 1991-2013 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Note Paper 14.0, Copyright © 1991-2013 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
NTSC Colors 14.0 20130423.r.221 2013/04/23:23:00:00 ©1993-2013 Adobe Systems Incorporated - from the file “NTSC Colors.plugin”
Ocean Ripple 14.0, Copyright © 1991-2013 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Oil Paint 14.0, Copyright © 2013 Adobe Systems Incorporated - from the file “Oil Paint.plugin”
OpenEXR 14.0, Copyright © 2003-2013 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
Paint Daubs 14.0, Copyright © 1991-2013 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Palette Knife 14.0, Copyright © 1991-2013 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Patchwork 14.0, Copyright © 1991-2013 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Paths to Illustrator 14.0, Copyright © 2003-2013 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
PCX 14.0 20130423.r.221 2013/04/23:23:00:00 ©1989-2013 Adobe Systems Incorporated - from the file “PCX.plugin”
Photocopy 14.0, Copyright © 1991-2013 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Photoshop 3D Engine 14.0 20130423.r.221 2013/04/23:23:00:00 ©2006-2013 Adobe Systems Incorporated - from the file “Photoshop3DEngine.plugin”
Picture Package Filter 14.0 20130423.r.221 2013/04/23:23:00:00 ©1993-2013 Adobe Systems Incorporated - from the file “ChannelPort.plugin”
Pinch 14.0, Copyright © 2003-2013 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
Pixar 14.0 20130423.r.221 2013/04/23:23:00:00 ©1989-2013 Adobe Systems Incorporated - from the file “Pixar.plugin”
Plaster 14.0, Copyright © 1991-2013 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Plastic Wrap 14.0, Copyright © 1991-2013 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
PNG 14.0, Copyright © 2003-2013 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
Pointillize 14.0, Copyright © 2003-2013 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
Polar Coordinates 14.0, Copyright © 2003-2013 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
Portable Bit Map 14.0 20130423.r.221 2013/04/23:23:00:00 ©1989-2013 Adobe Systems Incorporated - from the file “PBM.plugin”
Poster Edges 14.0, Copyright © 1991-2013 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Radial Blur 14.0, Copyright © 2003-2013 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
Radiance 14.0 20130423.r.221 2013/04/23:23:00:00 ©2003-2013 Adobe Systems Incorporated - from the file “Radiance.plugin”
Range 14.0 20130423.r.221 2013/04/23:23:00:00 ©2006-2013 Adobe Systems Incorporated - from the file “statistics.plugin”
Read Watermark NO VERSION - from the file “DigiRead.plugin”
Reticulation 14.0, Copyright © 1991-2013 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Ripple 14.0, Copyright © 2003-2013 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
Rough Pastels 14.0, Copyright © 1991-2013 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Save for Web 14.0, Copyright © 1999-2013 Adobe Systems Incorporated - from the file “Save for Web.plugin”
ScriptingSupport 13.0, Copyright © 2013 Adobe Systems Incorporated - from the file “ScriptingSupport.plugin”
Shake Reduction 14.0, Copyright © 2013 Adobe Systems Incorporated - from the file “Shake Reduction.plugin”
Shear 14.0, Copyright © 2003-2013 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
Skewness 14.0 20130423.r.221 2013/04/23:23:00:00 ©2006-2013 Adobe Systems Incorporated - from the file “statistics.plugin”
Smart Blur 14.0, Copyright © 2003-2013 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
Smudge Stick 14.0, Copyright © 1991-2013 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Solarize 14.0 20130423.r.221 2013/04/23:23:00:00 ©1993-2013 Adobe Systems Incorporated - from the file “Solarize.plugin”
Spatter 14.0, Copyright © 1991-2013 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Spherize 14.0, Copyright © 2003-2013 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
Sponge 14.0, Copyright © 1991-2013 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Sprayed Strokes 14.0, Copyright © 1991-2013 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Stained Glass 14.0, Copyright © 1991-2013 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Stamp 14.0, Copyright © 1991-2013 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Standard Deviation 14.0 20130423.r.221 2013/04/23:23:00:00 ©2006-2013 Adobe Systems Incorporated - from the file “statistics.plugin”
STL 14.0 20130423.r.221 2013/04/23:23:00:00 ©2006-2013 Adobe Systems Incorporated - from the file “U3D.plugin”
Sumi-e 14.0, Copyright © 1991-2013 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Summation 14.0 20130423.r.221 2013/04/23:23:00:00 ©2006-2013 Adobe Systems Incorporated - from the file “statistics.plugin”
Targa 14.0, Copyright © 2003-2013 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
Texturizer 14.0, Copyright © 1991-2013 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Tiles 14.0, Copyright © 2003-2013 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
Torn Edges 14.0, Copyright © 1991-2013 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Twirl 14.0, Copyright © 2003-2013 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
Underpainting 14.0, Copyright © 1991-2013 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Vanishing Point 14.0, Copyright © 2003-2013 Adobe Systems Incorporated - from the file “VanishingPoint.plugin”
Variance 14.0 20130423.r.221 2013/04/23:23:00:00 ©2006-2013 Adobe Systems Incorporated - from the file “statistics.plugin”
Water Paper 14.0, Copyright © 1991-2013 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Watercolor 14.0, Copyright © 1991-2013 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Wave 14.0, Copyright © 2003-2013 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
Wavefront|OBJ 14.0 20130423.r.221 2013/04/23:23:00:00 ©2006-2013 Adobe Systems Incorporated - from the file “U3D.plugin”
Wind 14.0, Copyright © 2003-2013 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
Wireless Bitmap 14.0 20130423.r.221 2013/04/23:23:00:00 ©1989-2013 Adobe Systems Incorporated - from the file “WBMP.plugin”
ZigZag 14.0, Copyright © 2003-2013 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
Optional and third party plug-ins: NONE
Plug-ins that failed to load: NONE
Flash:
Kuler
Adobe Exchange
Installed TWAIN devices: NONEGOT IT!!!!
After we eliminated Adobe settings, and the software, I started wondering what's outside that could be affecting VPE.
It's the resolution of the screen! I have a MBP Retina.
Using SetResX, I cranked the resolution of my screen from the default retina 1440 x 900 to the hardware's native res of 2880 x 1800.
THIS FIXED IT.
The resulting PNGs from the export perfectly match the planes (DXF Mesh).
So, I'm asserting that there may be a bug in the current release of PS CC where it is not compatible with the default retina resolution on the MacBook Pro. -
Incorrect Sales order line item assignment to the Planned order
Hi,
I am creating a sales order & then MRP run to get planned orders.
The sales order has one assembly line item, which is a configurable material. Inside the configuration of the assembly, I maintain some components. After saving it explodes and the same components reflect below line items of the assebly in sales order.
Now if I run MRP there is a requirement for the component and so the planned order is created for the component. But If I open the planned order & see inside its Assignment view, there is correct sales order number, but the line item its showing is that of Assembly and not of the component. Why ? Is there any wrong in configuration or any wrong in planning type ?
I checked correct Item category is used.
MRP Type - PD
Correct requirement type is used in procurement view.
I think what ever is comming is standard SAP functionality. But I am not sure.
The client is saying, thie is wrong and because of this the warehouse guy is picking the wrong material (As the line number is wrong).
Please suggest here.Hi Sambit,
We assign the Ordet type(Production order/ Planned order/ Network) to the requirment class to let the system know that for the material which has this requirment class , system chould create a Planned/ Procustion order. When you assign this normally system should create it automatically based on the settings. Requirment class comes from the requirment type which comes from the Item category and MRP type(*Genarally). Also check if there is any startegy Group assigned to the material in the material master and also the MRP group. Check the strtegy group defualts in the transaction "OPPS"(rEQUIRMENT TYPE /class FOR CUstome requirments). The best thing you could do is make the screen shots of the assembly header and the component's requirment classes and tell the business that based on this sytem is creating the planned order.And also check the plant parameters and the MRP group parameters in "OPPQ" and "OPPR" respectively. Kindly please let me know if you need any more infromation on this.
Regards,
Ram Pedarla
Maybe you are looking for
-
Lightroom 2.5 Upgrade fails to install Camera Profiles
Having just upgraded from LR 2.4 to LR 3.5 as Administrator, I am unable to select any camera profile except one listed as "Beta" when logged on as a User. The Adobe provided camera profiles that I've come to expect are ALL missing. It appears that
-
Password for Adobe Flash Player
When I try to 'install' the "New Version" of Adobe Flash Player it tells me to put in my ID and Password. I put in my ID and Password (I use the same one for everything, and I also have it written down) and it shakes it's head and won't let me do it.
-
as above. just been offered this memory, as a swap for my TwinMOS BH5. I have never used Kingston, but have heard of thier reputation. Will it run ok on my K8T ?? is anyone else running it ??
-
Windows 7 Home Premium ISO Download
My hard windows crashed and I installed ubunto which wiped out my recovery. I have the OEM sticker on my laptop and was wondering how to get a ISO 7 to reinstall windows. I have tryed many sites today and nothing seems to work. I type in my OEM stic
-
Error when trying to connect Crystal Enterprise to Peoplesoft (tools 8.49)
We have been using crystal enterprise with our peoplesoft for a while now, but with the tools version 8.43 on DB2 database. We are now upgrading our tools to version 8.49 on Oracle database. We have tons of crystal reports developed on crystal enterp