FCP won't export, background application busy

I saw the "fix" for this issue and have done what it says, but I still have the problem! I can't export the jobs I have to compressor on the computer and need to badly ASAP. Any ideas? Thanks!!!!!!!

FYI....
Trying to uninstall DVD Pro and then re-installing it will not work! I ran through this problem when I upgraded to FCP Studio. The issue lies between DVD Pro and QT7, it is a bug that apple is currently trying to resolve.
I spent numerous hours on the phone with apple to get this issue resolved. The best work around at the moment is going through Compressor and making a M2V. Compressor will retain your chapter markers from FCP no worries.
The only issue is time, it takes longer using compressor but the quality is 100x better because you have more control of the VBP.
Good Luck

Similar Messages

  • FCP won't export M2V

    I am running FCP Studio and trying to export an m2v. I recently upgraded my G5 and basically put my old hard drives right into the new G5 box. Since I did that, FCP asked for a serial number again, and I entered it. OK. Now I am trying to export the Mpeg2 and it says it can't export until DVD studio Pro is serialized - but then I run DVD studio pro and it IS serialized and registered. Restart did not fix it. FCP just can't seem to tell that DVD studio pro is already serialized and won't export. Should I trash my preferences? FCP or DVD studio pro or both? Any suggestions?

    FYI....
    Trying to uninstall DVD Pro and then re-installing it will not work! I ran through this problem when I upgraded to FCP Studio. The issue lies between DVD Pro and QT7, it is a bug that apple is currently trying to resolve.
    I spent numerous hours on the phone with apple to get this issue resolved. The best work around at the moment is going through Compressor and making a M2V. Compressor will retain your chapter markers from FCP no worries.
    The only issue is time, it takes longer using compressor but the quality is 100x better because you have more control of the VBP.
    Good Luck

  • FCP won't export MPEG2

    Just upgraded my OS to 10.5.7 from 10.4.9. No other changes to the system have been made but now FCP 4 will not export MPEG2. FCP locks up every time I try. FCP will still export QT and others, just not MPEG2. Never been a problem in the past. Any ideas?

    You were delightfully clear. My point it your previous experience doesn't count for anything because of the drastic change you've made to the computer.
    Think of it this way. Your computer is a human body that someone decides to do a heart transplant on even though the current heart seems to be functioning just peachy. Not only do they do a heart transplant, they don't bother to fully remove the previous version but simply splice in a few new valves and maybe a larger diameter aorta. So, this poor guy wakes up the next morning and finds that he can't walk because the new cobbled up heart just doesn't function as well as the older perfectly functioning one. All this flies in the face of the assurances of the Doctors (Apple marketing dept). They told him everything would be WONDERFUL when they were finished. Yea, right.
    Let's not forget your liver 4.5 is not supported by heart 10.5.7
    x

  • Please help - FCP won't export using DVCPro HD (or any HD) settings.

    Please help. I'm under a tight deadline to deliver.
    The native setting for both the project and footage is DVCPro HD 720p60 but when I export with this setting, or any other HD setting, whether to a Quicktime Movie or using Quicktime Conversion, the resulting image has thick black lines on both sides of the screen and in the middle.
    I have Quicktime Pro and have already reinstalled FCP to make sure I have all the components. But it's still not working.
    Please - any advice would help.
    Thanks.

    Well, have you done the usual things for when FCP doesn't act right?
    #44: FCP acting weird - Trash Prefs
    Shane's Stock Answer #44: FCP acting weird or unusual. Just not like is normally should
    If the program was working fine, and now isn't, or just isn't working the way it should, the first things to do are:
    1) Trash your FCP preferences. Download the appropriate version of FCP Rescue at http://www.pistolerapost2.com/fcprescue and run it.
    2) Open the Disk Utility and Repair Permissions.
    3) Shut down for 10 min. Go for a quick walk around the block and get SOME exercise today. Come back, turn on the computer and see how things are.
    4) (optional) Do the Hokey Pokey and turn your self about. Results may vary.
    Shane

  • Fcp won't export audio in sync, fcp won't export audio in sync

    Hs anyone any experience with FCP not exporting audio in sync even though the audion and video is in sync on your timeline prior to export, someone suggested that if you have independenytly recorded audio at 44.1KHZ instead of 48K this can cause issues, tried resampling but doesnt sem to make a difference any help would be appreciated

    So guys here's how it all turned out. As I couldn't re-record the original source audio wave files, I resorted to opening up the original source wave files which were 44.1k  and resample them by opening them in soundtrack pro, process tab, then select resample, this then presents a drop down tab with a range of resampling options, in this case I selected 48k which is what my video is set to.
    Surprisingly quickly the source files were re-encoded ( these were around 1 and 1/2 hour each running time)
    Then reopened FCP and without having to Re-edit the timeline just offlined the orginal 44.1k files and replaced them by reconnecting media and pointing to new resampled 48k files.
    They dropped back in perfectly and on export video and audio were in perfect sync.
    Lessons learned - always record the audio which was on a separate field recorder at 48k. - point well made Goldfish
    Secondly - thanks to everyone for your helps and hints
    Thirdly - in learning we have no failures, we just fall forwards
    Best regards,

  • FCP won't export clip as...

    QT movie or QT conversion (Broadband High)  which is what I want to do.
    I need to post a simple clip on our website and I have exported 100"s of times
    in the past using the QT conversion using Broadband high but now its not creating 
    the full file. It ends up on my desktop but it's only 4kb.
    Same thing happens when I try a straight QT export also.
    Any ideas?
    Thanks.
    Kevin
    A

    Broadband.
    It seems to have been a corrupted timeline.
    I copied and pasted to a new timeline and it's exported just fine.
    Thanks Dave.
    Kevin

  • Error while exporting/transporting the Business system from Dev to Quality

    Hi,
    We are getting the following error whil exporting/trsnporting the Business system from development(SLD) env to quality(SLD) environment. The error is
      404   Not Found
      The requested resource does not exist.
      Details:   Go to main page of this application!
    We have followed the following procedure to export :
    1. opened the business system.
    2. Clicked on export option
    3. tried to download
    then we got the above error message.
    Please provide your precious inputs to resove our problem.
    Thanks
    Ramesh

    Go through the following links for transporting XI objects.
    https://service.sap.com/~sapdownload/011000358700001684302005E/HowToSLDandXI.pdf
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/0fa2c490-0201-0010-61b4-df12869c4753
    ere's a good link for what you are looking.
    Re: Transport design and configuration objects
    Here are some blogs.
    /people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi
    /people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
    Pls reward if useful

  • OMF won't export out of final cut pro.

    Exporting a 93min 1920x1080 HD timeline to OMF
    5 second handles tried 2 second handles as well.
    OMF won't export out of final cut pro. Get error message there is a 2 gb limit.
    Final cut 6.0.6
    Have deadline. Didn't see it on any forum. Help!! Thanks!!

    Seems like a weird thing to not be able to do since it's called final cut PRO...
    Bagging on Final Cut Pro for OMF? HA! OMF has been around LONG BEFORE FCP was introduced. It isn't an FCP issue...OMF technology is VERY old. Over 20 years I believe. I used it on Avid...and it always had a 20GB limit.
    You cannot deliver 1 track via OMF. You can ask the audio person. I know that Avid now allows you to export an AAF...but FCP doesn't do AAF. For embedded audio I think that OMF is the only way. SO you have to work within the limitations of that format.
    Shane

  • InDesign CS5 won't export to PDF

    I've been having a problem recently when exporting to PDF in InDesign CS5.  I get an error message which says:
    1 problem was found with a background task:
    Export: "NameOfDocument" (1)
    It won't export to PDF.  What can I do about this?  Many thanks.

    Oh, sorry.  Forgot about the specifics.
    Local drive on Win7.  Yes, file naming conventions adhered to.

  • Can Web dynpro Java application run as background application

    Hi Experts,
    Is it possible to execute the Web dynpro java application in background without opening the application in a web browser.
    We just want the WD java application deployed on the SAP Web AS server to be invoked and get executed as a background application by some external web application. It should not get open at any point of time in a web browser.
    Can anyone suggest if it is possible?
    Thanks & Regards,
    Anurag

    Hi Anurag,
    Since Web Dynpro is "SAPu2019s standard UI technology based on MVC for developing user interfaces" (see http://www.sdn.sap.com/irj/sdn/nw-wdjava) it is by design not possible to run 'in the background'.
    There are other possibilities to develop server processes per your requirements, such as developing web services or servlet development.
    Web services are the de facto standard for executing business logic on a remote server. However, as I understand your external web application is not capable of sending web service requests, have you tried the servlet approach?
    See http://help.sap.com/saphelp_nwce711core/helpdata/en/3f/f8bc3d8af79633e10000000a11405a/frameset.htm for more info on how to develop a servlet using NWDS.
    Take particular attention to the sub-topic 'Servicing Client Requests' of the above guide
    Hope this helps!
    Best regards,
    Robin van het Hof

  • InD suddenly won't export to pdf

    I've been exporting files to pdf all day to send to my printer, and suddenly InDesign won't export anymore. Pop ups open as usual, but nothing happens.Grrrrrrr!!

    Are you patched to 7.0.4?
    Is the export hanging in the background, or is a file  supposedly created, but non-exisitent? Have you opened the Background Tasks panel to see if the task is completing?
    Can you export in the foreground by putting the file in a Book?

  • Xcelsius won't export to PPT or DOC

    -Operating System:  XP Professional 2002 SP2
    -OS Patch level:  SP2
    -Office Version:  XP 2002
    -Flash Player version: Adobe Flash Player 9 ActiveX
    -Xcelsius Version and Patch Level: Xcesius present 2008 5.0.0.99
    -Xcelsius Build number (Help>About Xcelsius):12,1,0,247
    -Business Objects Enterprise version/patch level (if applicable):
    -Issue Description:  Won't export to powerpoint or word, but will export to PDF.  When exporting to powerpoint, Xcelsius say's it is generating an SWF.  It will then open powerpoint with a new presentation that only has a box with a X through it.  Otherwise the presentation appears to have no content.  selecting presentation mode does not help. 
    A similar thing happens when exporting to word, but after the "generating SWF" dialog box goes away, nothing happens, word does not open, and I can not find a new word file.
    However, I can successfully export to PDF and the flash works.
    -Steps to Duplicate:
    1. create content in xcelsius
    2. select file/export/powerpoint or file/export/word
    3. enter file name for PPT or DOC file
    4. save or enter to close dialog box

    Hi markbb,
    I notice that you are running Xcelsius Present 2008 Version 5.0.0.99
    This is a totally upatched version and I suggest that you upgrade to the current SP2 (Service Patch 2) level
    You can download this from http://www.sdn.sap.com/irj/sdn/businessobjects-downloads
    You may also need to upgrade your Office to 2003
    Regards
    John

  • Suddenly Media Encoder won't export to .avi from a Premiere Pro sequence

    Came back to work today and out of the blue Media Encoder just won't export to .avi from a Premiere Pro sequence. Working with CS5 on Windows 7. That was the last thing I did yesterday before leaving work and it worked just fine, and it has always worked without any problems ever since I upgraded from CS4.
    Here are the steps I always take: go to Export-->Media from the Premiere Pro sequence and the settings open up, I select Microsoft AVI - PAL DV, click the queue button, AME opens up but nothing loads, the queue remains empty and nothing happens.
    I tried the same but selected MPEG-2 instead and it works that way.
    I also tried opening the sequence directly from AME and it does it but it doesn't give me the option to export it to Microsoft AVI, it's just not on the list.
    I deleted all preferences and old metadata options saved from all applications but that didn't help.
    Didn't install any updates whatsoever that might have changed anything at all from yesterday till now.
    If anyone knows what the problem might be and how to fix it, that will be truly appreciated, thanks in advance.

    After a couple of hours going through the registry and every folder and file inside "Program Files--Adobe--Media Encoder CS5" and trying to find the problem, I did.
    Thing is, the ExportAVI.prm plug-in file wasn't missing, it was there in the "Plug-ins--common" folder together with every other exporter and importer file, it just wasn't being loaded by AME for some reason. So i found a folder named "txt" and inside it there was a file named "AddExporterList.txt" which I opened and, as you could probably imagine from its pretty self-explanatory name, it contained a list of the exporter files that AME was supposed to load, and the AVI one wasn't on the list.
    I wasn't sure wether it was best for me to edit that text file and add the AVI exporter to the list or just delete the damn thing, so i checked on an older PC with the CS4 suite installed in it and the "txt" folder didn't even exist, so I just deleted it and opened up AME again and it loaded every single exporter .prm file including the ExporterAVI.prm of course and it works just fine now, so that's a load off my shoulders, hope this might help someone else in the future.

  • My Adobe Premiere Pro CS4 Won't Export

    I am a first time user and i have watched many tutorial regarding how to export but it still does not work. I have used Mac iMovie many times before. I have changed to a windows 7 now though. Please help It won't export.

    Welcome to the forums.
    If I were to tell you:
    I just started my export business and I watched several programs about exporting, but I can't get it to work. I used to have a small shop for a long time, but I wanted to get into a new business. Please help to export.
    you must think:
    1. What kind of stuff does he want to export, flowers, food, hazardous materials, weaponry, tug boats, ...
    2. From where to where: From the US to Iran, Columbia, Canada, San Marino, ...
    3. Why would they need tug boats in San Marino or wepons in Iran?
    4. What export licenses does he have?
    etc.
    Same with your question. Look here: How to ask questions the smart way
    Explain your source material, the codec used, the sequence settings, export settings, where it went wrong, etc.
    Look at this link: Some suggestions... and answer at least the 16 questions at the end of the Wiki article.

  • Won't export slideshow

    I have a slideshow with 160 photos in it. When I try to export the file as a 4:3, 720x460 quicktime movie...it won't export it. It either gets halfway, and then crashes...or chews on the whole file, but then only exports the first 15 photos in the sequence. I need to get this resolved ASAP. Please help!

    Try a couple things, Jeff, to improve your likelihood of success. Make sure you have the latest Quicktime version supported by your OS. Make sure you don't have other applications running at the same time. Run your OS maintenance routines (eg, with MacJanitor) and then use Disk Utility to Repair Permissions. Make sure you have at least 10% of your hard drive free.
    John
    G5 2.0, G4 400, IIGS   Mac OS X (10.4.5)  

Maybe you are looking for