FCPX does not render since I updated to latest version

I updated my Final Cut Pro X to version 10.1.3. Now if i want to create a project and ad clips, these clips are not rendering. Please help me!

DDo the clips need to be rendered? Did you trash your preferences?

Similar Messages

  • Music does not sync properly when updated to latest version.  Can see computer but can't play from ipod

    Music does not sync properly when updated to latest version.  Can see on computer but can't play from ipod.

    Hope this helps...
    I was having the same problem where only 1.7GB of 10GB of selected music would sync so I decided to start fresh.  The following steps worked for me:
    1.  Open itunes and connect iphone 5 if not already.  Uncheck all playlists, artists, etc. till nothing is checked to sync.  Then uncheck the sync music box so that all music will be removed from the phone.  Sync iphone
    2.  Eject device. Quit itunes (don't just close). unplug iphone.
    3.  Restart imac, macbook, or PC.
    4.  Restart iphone.
    5.  Now after power up, restart itunes then plug in iphone, check sync music and select music to sync.  Sync iphone
    6.  It worked for me!!!  Good luck.

  • Does not load pictures after updating with latest version

    I have windows 7 and just updated the latest version of firefox. Since I did this, none of the pictures load in my email.

    If images are missing then check that you aren't blocking images from some domains.
    *Check the permissions for the domain in the current tab in "Tools > Page Info > Permissions"
    *Check that images are enabled: Tools > Options > Content: [X] Load images automatically
    *Check the exceptions in "Tools > Options > Content: Load Images > Exceptions"

  • My back and forward buttons do not work also the refreash button does not work, I have reloaded the latest version of fire fox and that did not help. HELP please.

    My back and forward buttons do not work also the refresh button does not work, I have reloaded the latest version of fire fox and that did not help. All of navigation tool bar worked until I updated Fire Fox, now if I click on a link in yahoo, for instance, I can not get back to my yahoo home page without reloading Fire Fox. HELP please.

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.

  • HT4623 My sounds for such things as Netfix, or ABC Shows, etc does not work since last update.  How do I fix that?

    Sound not working since last upgrade. Get no sound with Netflix or ABC, NBC,etc. worked fine before last update.
    do I fix this?

    Hey Janetna5,
    Thanks for the question. Does restarting your iPad help the issue?
    Restarting your iOS device
    1. Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider.
    2. After the device has turned off, press and hold the Sleep/Wake button until the Apple logo appears.
    via iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
    If not, is it possible that your side switch is toggled to mute sounds? See this resource for information:
    Volume buttons and the Side Switch - iPad User Guide
    Mute notifications, alerts, and sound effects. Slide the Side Switch toward the Volume buttons.
    The Side Switch doesn’t mute the audio from music, podcasts, movies, and TV shows.
    Matt M.

  • HT3180 Apple tv does not work since software update

    Proceeded wtih software update and now there is a blank screen and apple tv also does not work from ipad mirroring

    So you can't access the main menu?
    I would grab a mirco usb cable and restore in iTunes, update likely didn't apply correctly

  • My roboform (ver 7.5.7) toolbar does not show since i updated firefox to 7.0.1 in the troubleshooting info. it shows as enabled. it does not appear in the menu of view/toolbars

    as above, when i updated firefox to 7.0.1 the toolbar for roboform disappeared. updating roboform did not fix it. it does not show up as a tool bar in the view/toolbar tab. i made sure the firefox browser option was enabled in roboform.

    Try to read raq here;
    * http://www.roboform.com/support/faq/roboform#toolbar

  • Plain lvm on root does not boot since yesterdays update [SOLVED]

    Running early hook udev
    Running early hook lvm2
    waiting 10 seconds for device /dev/mapper/VolGroup00-lvolroot...
    try exit to continue boot, but will likely fail
    That´s the message. Yesterdays update included a lot, so it did linux. If I wait a few seconds and type exit, boot succeeds. If I am too quick it does not.
    Is this kind of problem always a kernel issue?
    $ fdisk -l /dev/sda
    Disk /dev/sda: 298.1 GiB, 320072933376 bytes, 625142448 sectors
    Units: sectors of 1 * 512 = 512 bytes
    Sector size (logical/physical): 512 bytes / 4096 bytes
    I/O size (minimum/optimal): 4096 bytes / 4096 bytes
    Disklabel type: gpt
    Disk identifier: DF7144E9-E02C-4B93-9092-869368E647EF
    Device Start End Size Type
    /dev/sda1 2048 6143 2M BIOS boot partition
    /dev/sda2 6144 625142414 298.1G Linux LVM
    $ lvdisplay
    --- Logical volume ---
    LV Path /dev/VolGroup00/lvolroot
    LV Name lvolroot
    VG Name VolGroup00
    LV UUID QH1lO0-4DM2-eEX4-u4Rk-6kjD-eAgv-98djhI
    LV Write Access read/write
    LV Creation host, time archiso, 2013-11-24 20:45:39 +0100
    LV snapshot status source of
    lvolsnaproot [active]
    LV Status available
    # open 1
    LV Size 25.00 GiB
    Current LE 6400
    Segments 1
    Allocation inherit
    Read ahead sectors auto
    - currently set to 256
    Block device 254:1
    --- Logical volume ---
    LV Path /dev/VolGroup00/lvolswap
    LV Name lvolswap
    VG Name VolGroup00
    LV UUID mJdTW1-gXbJ-zjx6-br8m-eGob-ORmN-IUFAU6
    LV Write Access read/write
    LV Creation host, time archiso, 2013-11-24 20:46:23 +0100
    LV Status available
    # open 2
    LV Size 2.00 GiB
    Current LE 512
    Segments 1
    Allocation contiguous
    Read ahead sectors auto
    - currently set to 256
    Block device 254:4
    --- Logical volume ---
    LV Path /dev/VolGroup00/lvolhome
    LV Name lvolhome
    VG Name VolGroup00
    LV UUID o0P1S7-7Htp-3Bpw-tzUB-Y2Ac-nsgd-1OQRyu
    LV Write Access read/write
    LV Creation host, time archiso, 2013-11-24 20:47:34 +0100
    LV Status available
    # open 1
    LV Size 262.95 GiB
    Current LE 67316
    Segments 1
    Allocation inherit
    Read ahead sectors auto
    - currently set to 256
    Block device 254:5
    --- Logical volume ---
    LV Path /dev/VolGroup00/lvolsnaproot
    LV Name lvolsnaproot
    VG Name VolGroup00
    LV UUID yEymil-cy1U-3fb6-Lh3y-z4wK-iSqr-ilKPBK
    LV Write Access read/write
    LV Creation host, time htpc, 2013-11-25 23:04:57 +0100
    LV snapshot status active destination for lvolroot
    LV Status available
    # open 0
    LV Size 25.00 GiB
    Current LE 6400
    COW-table size 8.13 GiB
    COW-table LE 2082
    Allocated to snapshot 22.80%
    Snapshot chunk size 4.00 Ki. (
    Segments 1
    Allocation inherit
    Read ahead sectors auto
    - currently set to 256
    Block device 254:3
    *EDIT: I just got in a new Kernel-Version, still does not change anything (3.12.2-1)
    Last edited by kodiak (2014-09-14 10:44:55)

    Seems not to be the kernel version. Downgrading to 3.12.1-3 did not change anything. Another interesting fact is that lvm commands are not available in the rescue shell. AFAIK they should? Is the rescue shell not at the point when the initramfs was loaded?
    When typing exit and the system afterwards boots successfully I see again that the lvm hook is run again.
    Installation is quite new (around a week), maybe it was the first time mkinitcpio was run. In that case, why does installation from iso fine, and from repos not?
    dmesg snippet
    0.733717] systemd-udevd[47]: starting version 208
    [ 0.773469] SCSI subsystem initialized
    [ 0.779060] libata version 3.00 loaded.
    [ 0.781859] sdhci: Secure Digital Host Controller Interface driver
    [ 0.781864] sdhci: Copyright(c) Pierre Ossman
    [ 0.782093] scsi0 : pata_atiixp
    [ 0.782307] scsi1 : pata_atiixp
    [ 0.782388] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf100 irq 14
    [ 0.782392] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf108 irq 15
    [ 0.782548] sdhci-pci 0000:00:14.7: SDHCI controller found [1022:7806] (rev 0)
    [ 0.782940] mmc0: SDHCI controller on PCI [0000:00:14.7] using ADMA
    [ 0.783550] ACPI: bus type USB registered
    [ 0.783642] usbcore: registered new interface driver usbfs
    [ 0.783656] usbcore: registered new interface driver hub
    [ 0.783710] usbcore: registered new device driver usb
    [ 0.784426] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 0.784649] ehci-pci: EHCI PCI platform driver
    [ 0.784946] ehci-pci 0000:00:12.2: EHCI Host Controller
    [ 0.784960] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
    [ 0.784977] QUIRK: Enable AMD PLL fix
    [ 0.784980] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
    [ 0.784992] ehci-pci 0000:00:12.2: debug port 1
    [ 0.785047] ehci-pci 0000:00:12.2: irq 17, io mem 0xfef4e000
    [ 0.785528] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [ 0.785711] ohci-pci: OHCI PCI platform driver
    [ 0.794645] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
    [ 0.795083] hub 1-0:1.0: USB hub found
    [ 0.795094] hub 1-0:1.0: 5 ports detected
    [ 0.795717] ehci-pci 0000:00:13.2: EHCI Host Controller
    [ 0.795726] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
    [ 0.795732] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
    [ 0.795744] ehci-pci 0000:00:13.2: debug port 1
    [ 0.795780] ehci-pci 0000:00:13.2: irq 17, io mem 0xfef4c000
    [ 0.804657] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
    [ 0.804934] hub 2-0:1.0: USB hub found
    [ 0.804945] hub 2-0:1.0: 5 ports detected
    [ 0.805608] ohci-pci 0000:00:12.0: OHCI PCI host controller
    [ 0.805617] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
    [ 0.805647] ohci-pci 0000:00:12.0: irq 18, io mem 0xfef4f000
    [ 0.862419] hub 3-0:1.0: USB hub found
    [ 0.862435] hub 3-0:1.0: 5 ports detected
    [ 0.862888] ohci-pci 0000:00:13.0: OHCI PCI host controller
    [ 0.862899] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 4
    [ 0.862916] ohci-pci 0000:00:13.0: irq 18, io mem 0xfef4d000
    [ 0.919150] hub 4-0:1.0: USB hub found
    [ 0.919168] hub 4-0:1.0: 5 ports detected
    [ 0.919370] ahci 0000:00:11.0: version 3.0
    [ 0.919629] ahci 0000:00:11.0: irq 40 for MSI/MSI-X
    [ 0.919700] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x9 impl SATA mode
    [ 0.919704] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part sxs
    [ 0.920411] scsi2 : ahci
    [ 0.920519] scsi3 : ahci
    [ 0.920614] scsi4 : ahci
    [ 0.920716] scsi5 : ahci
    [ 0.920792] ata3: SATA max UDMA/133 abar [email protected] port 0xfef50100 irq 40
    [ 0.920794] ata4: DUMMY
    [ 0.920796] ata5: DUMMY
    [ 0.920800] ata6: SATA max UDMA/133 abar [email protected] port 0xfef50280 irq 40
    [ 0.921095] xhci_hcd 0000:00:10.0: xHCI Host Controller
    [ 0.921103] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 5
    [ 0.921372] xhci_hcd 0000:00:10.0: irq 41 for MSI/MSI-X
    [ 0.921381] xhci_hcd 0000:00:10.0: irq 42 for MSI/MSI-X
    [ 0.921389] xhci_hcd 0000:00:10.0: irq 43 for MSI/MSI-X
    [ 0.921769] hub 5-0:1.0: USB hub found
    [ 0.921783] hub 5-0:1.0: 2 ports detected
    [ 0.921944] xhci_hcd 0000:00:10.0: xHCI Host Controller
    [ 0.921952] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 6
    [ 0.924918] hub 6-0:1.0: USB hub found
    [ 0.924931] hub 6-0:1.0: 2 ports detected
    [ 0.946676] ohci-pci 0000:00:14.5: OHCI PCI host controller
    [ 0.946693] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7
    [ 0.946716] ohci-pci 0000:00:14.5: irq 18, io mem 0xfef4b000
    [ 1.002434] hub 7-0:1.0: USB hub found
    [ 1.002449] hub 7-0:1.0: 2 ports detected
    [ 1.238227] ata6: SATA link down (SStatus 0 SControl 300)
    [ 1.358231] usb 2-2: new high-speed USB device number 2 using ehci-pci
    [ 1.404881] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 1.406514] ata3.00: ATA-8: WDC WD3200BPVT-22JJ5T0, 01.01A01, max UDMA/133
    [ 1.406519] ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 1.408180] ata3.00: configured for UDMA/133
    [ 1.408338] scsi 2:0:0:0: Direct-Access ATA WDC WD3200BPVT-2 01.0 PQ: 0 ANSI: 5
    [ 1.413199] sd 2:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
    [ 1.413205] sd 2:0:0:0: [sda] 4096-byte physical blocks
    [ 1.413296] sd 2:0:0:0: [sda] Write Protect is off
    [ 1.413300] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 1.413335] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.483078] sda: sda1 sda2
    [ 1.483598] sd 2:0:0:0: [sda] Attached SCSI disk
    [ 1.491116] usb-storage 2-2:1.0: USB Mass Storage device detected
    [ 1.491234] scsi6 : usb-storage 2-2:1.0
    [ 1.491333] usbcore: registered new interface driver usb-storage
    [ 1.638236] tsc: Refined TSC clocksource calibration: 1896.551 MHz
    [ 1.691096] device-mapper: uevent: version 1.0.3
    [ 1.691500] device-mapper: ioctl: 4.26.0-ioctl (2013-08-15) initialised: [email protected]
    [ 1.703178] bio: create slab <bio-1> at 1
    [ 1.714947] usb 5-2: new full-speed USB device number 2 using xhci_hcd
    [ 1.891621] usb 3-1: new full-speed USB device number 2 using ohci-pci
    [ 2.061153] hidraw: raw HID events driver (C) Jiri Kosina
    [ 2.078556] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.0-1/input2
    [ 2.078613] usbcore: registered new interface driver usbhid
    [ 2.078616] usbhid: USB HID core driver
    [ 2.084014] input: Logitech Unifying Device. Wireless PID:4024 as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.2/0003:046D:C52B.0003/input/input2
    [ 2.084126] logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:4024] on usb-0000:00:12.0-1:1
    [ 2.493224] scsi 6:0:0:0: CD-ROM HL-DT-ST BD-RE BP40NS20 ML01 PQ: 0 ANSI: 0
    [ 2.500078] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 2.500084] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 2.500311] sr 6:0:0:0: Attached scsi CD-ROM sr0
    [ 2.638441] Switched to clocksource tsc
    [ 16.797358] bio: create slab <bio-2> at 2
    [ 81.531404] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
    [ 82.297540] systemd[1]: systemd 208 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
    [ 82.333177] systemd[1]: Set hostname to <htpc>.
    [ 82.719301] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
    [ 82.719385] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    [ 82.719399] systemd[1]: Starting Login Prompts.
    [ 82.725559] systemd[1]: Reached target Login Prompts.
    [ 82.725572] systemd[1]: Starting Remote File Systems.
    [ 82.731721] systemd[1]: Reached target Remote File Systems.
    [ 82.731734] systemd[1]: Expecting device sys-subsystem-net-devices-enp2s0.device...
    [ 82.738019] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
    [ 82.744316] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
    [ 82.744328] systemd[1]: Starting Device-mapper event daemon FIFOs.
    [ 82.750583] systemd[1]: Listening on Device-mapper event daemon FIFOs.
    [ 82.750594] systemd[1]: Starting LVM2 metadata daemon socket.
    [ 82.756883] systemd[1]: Listening on LVM2 metadata daemon socket.
    [ 82.756894] systemd[1]: Starting Delayed Shutdown Socket.
    [ 82.763117] systemd[1]: Listening on Delayed Shutdown Socket.
    [ 82.763138] systemd[1]: Starting udev Kernel Socket.
    [ 82.769277] systemd[1]: Listening on udev Kernel Socket.
    [ 82.769292] systemd[1]: Starting udev Control Socket.
    [ 82.775388] systemd[1]: Listening on udev Control Socket.
    [ 82.775407] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
    [ 82.775455] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
    [ 82.775465] systemd[1]: Starting Paths.
    [ 82.781515] systemd[1]: Reached target Paths.
    [ 82.781525] systemd[1]: Starting Encrypted Volumes.
    [ 82.787615] systemd[1]: Reached target Encrypted Volumes.
    [ 82.787654] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
    [ 82.794043] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
    [ 82.794060] systemd[1]: Starting Journal Socket.
    [ 82.800351] systemd[1]: Listening on Journal Socket.
    [ 82.815656] systemd[1]: Started Load Kernel Modules.
    [ 82.815691] systemd[1]: Mounting Configuration File System...
    [ 82.822783] systemd[1]: Starting udev Coldplug all Devices...
    [ 82.830287] systemd[1]: Starting Apply Kernel Variables...
    [ 82.837162] systemd[1]: Starting Setup Virtual Console...
    [ 82.843993] systemd[1]: Mounted FUSE Control File System.
    [ 82.844038] systemd[1]: Mounting Debug File System...
    [ 82.851499] systemd[1]: Started Set Up Additional Binary Formats.
    [ 82.851557] systemd[1]: Mounting Huge Pages File System...
    [ 82.858414] systemd[1]: Starting Journal Service...
    [ 82.871340] systemd[1]: Started Journal Service.
    [ 83.130939] systemd-journald[179]: Vacuuming done, freed 0 bytes
    [ 83.219556] EXT4-fs (dm-1): re-mounted. Opts: data=ordered
    [ 83.635981] systemd-udevd[204]: starting version 208
    [ 84.230874] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
    [ 84.231188] acpi device:19: registered as cooling_device0
    [ 84.231218] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
    [ 84.231289] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:00/input/input3
    [ 84.232310] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
    [ 84.232319] ACPI: Power Button [PWRB]
    [ 84.232425] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
    [ 84.232431] ACPI: Power Button [PWRF]
    [ 84.320484] ACPI: acpi_idle registered with cpuidle
    [ 84.336628] acpi-cpufreq: overriding BIOS provided _PSD data
    [ 84.471366] hda-intel 0000:00:01.1: Force to non-snoop mode
    [ 84.471454] snd_hda_intel 0000:00:01.1: irq 44 for MSI/MSI-X
    [ 84.539586] [drm] Initialized drm 1.1.0 20060810
    [ 84.616149] input: PC Speaker as /devices/platform/pcspkr/input/input6
    [ 84.802251] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.1/sound/card0/input10
    [ 84.802375] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.1/sound/card0/input9
    [ 84.802528] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.1/sound/card0/input8
    [ 84.802816] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input7
    [ 84.803739] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
    [ 84.803740] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [ 84.803792] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb20
    [ 84.908428] Bluetooth: Core ver 2.16
    [ 84.908453] NET: Registered protocol family 31
    [ 84.908456] Bluetooth: HCI device and connection manager initialized
    [ 84.908467] Bluetooth: HCI socket layer initialized
    [ 84.908472] Bluetooth: L2CAP socket layer initialized
    [ 84.908480] Bluetooth: SCO socket layer initialized
    [ 84.931811] microcode: CPU0: patch_level=0x06001116
    [ 85.046529] usbcore: registered new interface driver btusb
    [ 85.077099] [drm] radeon kernel modesetting enabled.
    [ 85.077142] checking generic (c0000000 7f0000) vs hw (c0000000 10000000)
    [ 85.077144] fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
    [ 85.077166] Console: switching to colour dummy device 80x25
    [ 85.077891] [drm] initializing kernel modesetting (ARUBA 0x1002:0x9994 0x1002:0x9994).
    [ 85.077937] [drm] register mmio base: 0xFEF00000
    [ 85.077939] [drm] register mmio size: 262144
    [ 85.078029] ATOM BIOS: 113
    [ 85.078143] radeon 0000:00:01.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
    [ 85.078146] radeon 0000:00:01.0: GTT: 1024M 0x0000000020000000 - 0x000000005FFFFFFF
    [ 85.078149] [drm] Detected VRAM RAM=512M, BAR=256M
    [ 85.078150] [drm] RAM width 64bits DDR
    [ 85.078215] [TTM] Zone kernel: Available graphics memory: 1716980 kiB
    [ 85.078217] [TTM] Initializing pool allocator
    [ 85.078226] [TTM] Initializing DMA pool allocator
    [ 85.078250] [drm] radeon: 512M of VRAM memory ready
    [ 85.078252] [drm] radeon: 1024M of GTT memory ready.
    [ 85.122912] microcode: CPU0: new patch_level=0x06001119
    [ 85.123060] microcode: CPU1: patch_level=0x06001116
    [ 85.123528] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 85.126305] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    [ 85.126338] pcieport 0000:00:15.0: driver skip pci_set_master, fix it!
    [ 85.126639] r8169 0000:02:00.0: irq 45 for MSI/MSI-X
    [ 85.126963] r8169 0000:02:00.0 eth0: RTL8168evl/8111evl at 0xffffc90011238000, dc:9c:52:17:11:26, XID 0c900800 IRQ 45
    [ 85.126969] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
    [ 85.220962] [drm] GART: num cpu pages 262144, num gpu pages 262144
    [ 85.237449] [drm] Loading ARUBA Microcode
    [ 85.306293] systemd-udevd[212]: renamed network interface eth0 to enp2s0
    [ 85.682594] [drm] PCIE GART of 1024M enabled (table at 0x0000000000276000).
    [ 85.682857] radeon 0000:00:01.0: WB enabled
    [ 85.682862] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff88009280ac00
    [ 85.683942] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0xffffc90013735a18
    [ 85.683946] radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000020000c04 and cpu addr 0xffff88009280ac04
    [ 85.683951] radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000020000c08 and cpu addr 0xffff88009280ac08
    [ 85.683954] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff88009280ac0c
    [ 85.683956] radeon 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000020000c10 and cpu addr 0xffff88009280ac10
    [ 85.683960] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [ 85.683961] [drm] Driver supports precise vblank timestamp query.
    [ 85.683984] radeon 0000:00:01.0: irq 46 for MSI/MSI-X
    [ 85.683999] radeon 0000:00:01.0: radeon: using MSI.
    [ 85.684287] [drm] radeon: irq initialized.
    [ 85.709144] [drm] ring test on 0 succeeded in 2 usecs
    [ 85.709209] [drm] ring test on 3 succeeded in 2 usecs
    [ 85.709217] [drm] ring test on 4 succeeded in 1 usecs
    [ 85.765310] [drm] ring test on 5 succeeded in 1 usecs
    [ 85.785335] [drm] UVD initialized successfully.
    [ 85.787344] [drm] Enabling audio 0 support
    [ 85.787349] [drm] Enabling audio 1 support
    [ 85.787351] [drm] Enabling audio 2 support
    [ 85.787354] [drm] Enabling audio 3 support
    [ 85.787356] [drm] Enabling audio 4 support
    [ 85.787358] [drm] Enabling audio 5 support
    [ 85.787900] [drm] ib test on ring 0 succeeded in 0 usecs
    [ 85.788436] [drm] ib test on ring 3 succeeded in 0 usecs
    [ 85.789010] [drm] ib test on ring 4 succeeded in 1 usecs
    [ 85.809926] [drm] ib test on ring 5 succeeded
    [ 85.830620] [drm] Radeon Display Connectors
    [ 85.830624] [drm] Connector 0:
    [ 85.830627] [drm] DP-1
    [ 85.830629] [drm] HPD1
    [ 85.830633] [drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x6
    HOOKS="base udev autodetect modconf block lvm2 filesystems keyboard fsck"
    ### BEGIN /etc/grub.d/10_linux ###
    menuentry 'Arch Linux, with Linux core repo kernel' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-core repo kernel-true-a8d95468-e406-416c-b951-14e1e35675b9' {
    set gfxpayload=keep
    insmod gzio
    insmod part_gpt
    insmod lvm
    insmod ext2
    set root='lvm/VolGroup00-lvolroot'
    if [ x$feature_platform_search_hint = xy ]; then
    search --no-floppy --fs-uuid --set=root --hint='lvm/VolGroup00-lvolroot' a8d95468-e406-416c-b951-14e1e35675b9
    search --no-floppy --fs-uuid --set=root a8d95468-e406-416c-b951-14e1e35675b9
    echo 'Loading Linux core repo kernel ...'
    linux /boot/vmlinuz-linux root=/dev/mapper/VolGroup00-lvolroot rw
    echo 'Loading initial ramdisk ...'
    initrd /boot/initramfs-linux.img
    Last edited by kodiak (2013-12-01 19:41:14)

  • The icon on my message app does not work since the update, the recipient is set up to use it, my grandchildren

    The sent icon on my ipad doesn't work since the update to ISO 7.06 the recipients are set up to receive messages 

    You can try resetting your iPad by simultaneously pressing and holding the Home and Sleep/Wake buttons until you see the Apple Logo. This can take up to 15 seconds so be patient and don't release the buttons until the logo appears.
    Try again to see if the problem persists.

  • Almost everything I do whether send an email or load a webpage it takes a very long time since I updated the latest version of Firefox; what can I do?

    I updated to Firefox 14.0.1; my Operating System is Windows Vista on my Compaq Presario C700. I have taken it to the computer repair shop and they said they found a Trojan and removed it. It was still operating VERY slowly, so I took it back in. They said they could not find anything more. I removed MANY of my desktop icons and eliminated some of the programs from my start up menu. It is still taking up to 5 minutes to load some pages even just send an email!

    Please try the [https://support.mozilla.org/en-US/kb/reset-firefox-easily-fix-most-problems Reset Firefox] feature via '''Help''' ('''Alt''' + '''H''') > '''Troubleshooting Information'''.
    (To revert to the previous profile you were using, close the new profile (i.e. exit Firefox), start Firefox and choose the '''Default User''' profile. While the [https://support.mozilla.org/en-US/kb/profile-manager-create-and-remove-firefox-profiles Profile Manager] is open, you can also delete the newly reset profile (the one containing random numbers), or the former profile, as the case may be). If the reset is okay, it would be a good idea to delete the old profile as otherwise it would be left intact with the previous data until deleted.
    [https://support.mozilla.org/en-US/kb/Managing-profiles Managing profiles]
    [https://support.mozilla.org/en-US/kb/Profiles?s=profile&r=2&e=sph&as=s Profiles Howto]
    If the issue is due to Windows malware, posting in a dedicated security forum would also be helpful:

  • FireFox does not know Adobe Reader Plugin is latest version. Why?

    OS is Windows Vista with all updates. Using Adobe Reader X version 10.1.9. Checking for updates from within the Adobe Reader program generates a message from Adobe that the software up to date, no updates available. Firefox advises Adobe Plugin version 10.1.9 is vulnerable and to update the plugin. Attempting to update from within Firefox connects with the Adobe update site. Attempting to update from within the update site brings up a message from Adobe that the latest software is installed. Please advise.

    The plugin checker site is not able to* store multiple versions of the Adobe Acrobat plugin as the current version. So, with apologies to Windows Vista users, you simply have to ignore what the plugin check site says about that particular plugin and rely on Adobe's in-product updater.
    ''*'' It ''could'' be redesigned to do this in the future, but currently it is not able to do this.

  • I use OverDrive to get audiobooks from my library to listen on my ipod. Does not work since latest update of ipod. Converts the WMA and acts like it is putting it on the ipod but then it isn't there.

    I use OverDrive to get audiobooks from my library to listen on my ipod. Does not work since latest update of ipod. Converts the WMA and acts like it is putting it on the ipod but then it isn't there.

    Downgrading the iOS is not supported by Apple.Have yo tried:
    - Backing up and restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Restore to factory settings/new iOS device.                       
    - Go to the OverDrive support site

  • Since I downloaded the latest version of iTunes, my remote app on iPhone and iPad does not connect to iTunes library... Any ideas?

    Since I downloaded the latest version of iTunes, my remote app on iPad and iPhone does not recognise ,or connect to, my iTunes library... Any ideas ?

    Hi Pittgo76,
    If you appear to missing your iTunes library after a recent update, you may find the following article helpful:
    Apple Support: No content shows up in iTunes after updating
    - Brenden

  • Script does not work anymore after updating to FM 12.0.3

    With TCS5, Robohelp would crash when importing FrameMaker books to RH, because the FM files had embedded graphics. So, I found a script to externalize the graphics before doing the import (the script is: ExtendScript of the week: Externalizing Graphics « TechComm Central by Adobe). However, this script is not working since I updated from 12.0.2 to 12.0.3. And without this script, we can't create HTML5 output!
    Although I wrote a few simple scripts, this one is quite complex and would be difficult to debug. Anyone here knows what could have changed to make the script useless after such a small update? Or can update this script to make it work?

    Hi again,
    For those who would like to know... I made this script work with 12.0.3. I simply removed the instructions that  added an item in the File menu and stuff about a report, which I don't think ever worked. So, I still don't know exactly why it didn't work anymore (don't have time or knowledge to investigate), but I'm still interested to know.

  • In the finder window, column view, I double click on icon, eg. a spread sheet,  and document will not open since I updated to OSXv10.8.2. Help anyone?

    In the finder window, column view, I double click on icon, eg. a spread sheet,  and document will not open since I updated to OSXv10.8.2. Help anyone?

    Hi Ron,
    Highlight one in the Finder & do as Get Info on it, what does open With say to use?
    What did you update 10.8.2 from exactly? 10.6.8 maybe?

Maybe you are looking for

  • How do i remove flash player from my mac? or find out if it is malware? i recently got a download and it is acting strange...

    I am concerned the flash player maybe a virus? how can I tell? I have updated software from Apple... but every time I watch youtube or other sites... a pop up  come come from flash player and asks for permission... I always deny... but this is new...

  • Problem saving Word doc as PDF - Vista?

    I have a pc with Vista and Word 2007. I have adobe Reader 9 or 9.1. Some free download or add on thing allows me to save word docs as PDFs. This worked fine to start with but then I found I couldn't move the PDFs I have created from one file to anoth

  • I compiled now how do I run the program

    Hi, I have installed J2SE. I have written a .java file that successfully compiles in MS DOS (I have a Windows 2000 platform). This program has JPanes, Jpanels etc. How do I run this program? I am guessing it is not through DOS. Seems so simple but I

  • Delivery - Shipment and Shipment cost docs

    Hi, I created delivery and completed invoicing , when I tried to create shipment doc with VT01N , Its asking for tranportation planing point and shipment type. FYI I have configured routes , legs(Direct leg) and shipment doc types.My question is , is

  • Incorrect outgoing message count

    Hello, I just found this problem. Every time when I send out an email, I find the count of outgoing message is always wrong (on the bottom-left panel of Mail Activity) I attached a pic here: you can see, I just sent one email, but the count is 12 of