Fcx4 bin clips are not appearing in the viewer after clicking on them.

fcx4 bin clips are not appearing in the viewer after clicking on them , i need help getting them to appear in the viewer.

I have the same issue. I am using apex.oracle.com for some test applications, but for last couple of weeks when I login and click the "Application builder" I could not see my applications there (around 4-5 of them)! It says No applications found.
Neither I have any application groups setup nor do any criteria given in "Application" search field under "Application builder".
The only way I could access some, if not all, of my applications is to pull it from the link under the context box "Recent" (which you can see in the right hand side of the "Application builder" page.)
Any help is greatly appreciated. This issue is not a show stopper as I could still pull out my critical applications from the recent link, but its definitely a worrisome issue.
Thanks in advance
Regards
Ligon Gopinathan

Similar Messages

TS4425 when trying to access photo stream on Apple TV, I am getting the error message terms and conditions have changed, but when I go into iCloud on my Mac the new terms and conditions are not appearing - How can I manually agree to them ?

When trying to access photo stream on Apple TV, I am getting the error message terms and conditions have changed, but when I go into iCloud on my Mac the new terms and conditions are not appearing - How can I manually agree to them ?

Welcome to the Apple Community.
The following article(s) may help you.
Photo Stream ToU's

Mail messages in my In Box are not appearing in the list of messages.

Mail: SOME mail messages in my In Box are not appearing in the list of messages. Instead, there's a blank line in its place if already read, or just the blue dot if unread. But when I click on the line, the message's column/header detail appears (and I can open it).
(Coincidental or not, immediately prior to this situation, I established a New Rule that mail coming from my son's email address should be Moved to the IN Box as they had been going to Trash. None of the emails I'm questioning have any reference to his email address in them.)

Continuation of info (from GDTGG): When I leave that mail message and click on a different one, the blank line marking its place once again appears for the message. (There was a similar problem posted by someone else in 2009 entitled "Inbox Has Blank Lines" but with no apparent solution that I could find.)

/101,/560 are Not appearing in the RT cluster while running the live run

HI Experts,
Pls help me to update the problem,While running the live payroll run the wagetypes /101,/560 are Not appearing in the RT cluster .
and all primary wagetypes are missing in the RT log .I have checked the processing class table for each classes but its perfecly placed.Whatever I placed in the IT 8 is not appering in the RT LOG .I have run with Standard and custom schema's also for indian payroll.Any settings has been changed for basic infotype??wht could be the reson.Early respose will be appreciated.
Regards
Chandra

Hi Chandra,
To me, your problem seems like a patch updation problem.
Please contact your basis team.
Technical wagetypes not coming in the RT table
Regards,
Dilek

Rendered images are not appearing on the webpage. works fine on IE. All plugins appear to be present includeing Adobe Flash

rendered images are not appearing on the webpage. works fine on IE. All plugins appear to be present including Adobe Flash

If that only happens on a specific page or domain then make sure that you do not block images on that domain.
See [[Images or animations do not show]]
*A way to see which images are blocked is to click the favicon (Site Identification icon) on the left side of the location bar.
*A click on the "More Information" button will open the Security tab of the "Page Info" window (also accessible via "Tools > Page Info").
*Go to the Media tab of that "Tools > Page Info" window.
*Select the first image link and scroll down though the list with the Down arrow key.
*If an image in the list is grayed and there is a check-mark in the box "Block Images from..." then remove that mark to unblock the images from that domain.
*You can see the permissions for the domain in the current tab in Tools > Page Info > Permissions
*You can see all image exceptions in Tools > Options > Content: Load Images > Exceptions

I am trying to send photos to the cloud from my phone to my iPad but they are not appearing in the stream. I have read the instructions and I think I am doing it right or am I missing a part of the process?

I am trying to send photos to the cloud from my phone to my iPad but they are not appearing in the stream. I have read the instructions and I think I am doing it right or am I missing a part of the process?

HI,
Have you done this before ? And if so, is photo stream turned on on your iphone and ipad. and as Alfred DeRose pointed out they must both on the same icloud account.
If you're new to this, you might want to do some research. Photo stream is different from camera roll and albums. Many have been on this sight looking for their photos stored in icloud after restore, etc. and they're not there. Also, after thirty days icloud deletes your photos from photo stream.
So if you're not aware, you might want to google your question. We're using the camera connection kit soon and I am learning about it. From all I've read, I'm also not the biggest icloud fan. I use dropbox. We plan to put photos taken on ipad with a camera/iphones into albums on the ipad. We'll keep all on the sd card until (and after) they can be uploaded to a computer.
An example of an article we can learn from -
http://www.macobserver.com/tmo/article/how-to-understand-and-work-with-your-iclo ud-photo-stream
Hope this helps.

DPM 2012 R2 Backup job FAILED for some Hyper-v VMs and Some Hyper-v VMs are not appearing in the DPM

DPM 2012 R2 Backup job FAILED for some Hyper-v VMs
DPM encountered a retryable VSS error. (ID 30112 Details: VssError:The writer experienced a transient error. If the backup process is retried,
the error may not reoccur.
(0x800423F3))
All the vss Writers are in stable state
Also Some Hyper-v VMs are not appearing in the DPM 2012 R2 Console When I try to create the Protection Group please note that they are not part of cluster.
Host is 2012 R2 and The VM is also 2012 R2.

Hi,
What update rollup are you running on the DPM 2012 R2 server ? DPM 2012 R2 UR5 introduced a new refresh feature that will re-enumerate data sources on an individual protected server.
Check for VSS errors inside the guests that are having problems being backed up.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

Two external hard drive are not appearing on the desktop anymore on my 2008 24" iMac. One is a Lacie d2 Quadra and the other is a G Drive. Both are 1 Tb

Two external hard drive are not appearing on the desktop anymore on my 2008 24" iMac. One is a Lacie d2 Quadra and the other is a G Drive. Both are 1 Tb

Are they daisy chained? Have you tried them one at a time? Have you tried a different FireWire cable? Do they show up in either system profiler or Disk Utility? Have you reset the SMC? http://support.apple.com/kb/HT3964

Hi all. I recently restore my old iphone 5 on my new 6. I'm having problems with bluetooth devices. The ones that were already paired with the old one are not showing in the list, and most of them(not all) are not working or pairing. I already restod

Hi all. I recently restore my old iphone 5 on my new 6. I'm having problems with bluetooth devices. The ones that were already paired with the old one are not showing in the list, and most of them(not all) are not working or pairing. I already restored network settings to no avail. Any ideas?

What's more, they don't even show on the bluetooth devices list..

Lead time values are not appearing in the report for current year.

Hi friends,
Iam checking a report in production. where lead time values are displayed as 0 for 1 key figure lead time3 (w/0 dim) . i found there is a formula for this it shows like NODIM ( 'Lead Time 3' ).and there is a value for cal.lead time
how can i get values in the report.
Thanks ,
VRV.

Hi,
Although your question is not clear, I understood that the formula built on that KF is NODIM. Basically it means, units of measurement is not considered when calculating.
Eg: 5 Minutes + 5 Kilograms = 10
You please try to analyze your KF by the above logic. Then you would be able to figure out why the data is not appearing in the report..
Assign if helps...
Regards,
Suman

Statutory deductions are not appearing in the Remuneration statement

Hi Friends,
I have done all configurations to Indian Payroll including ESI, PF etc.,. To configure these deductions I have used SAP standard wage types. Everything is at the configuration level. But these are not appearing in HR form. Any customisation has to be done in addition to this. Can anybody help me in this regard.
Best Regards,
KP Gupta

Krishna,
I suggest that you check the window screen as well. Assuming you have developed the remuneration statement like most companies' pau slips, you would have created one window for Earnings and another for Deductions. You need to assign groups to each window. Double click anywhere inside the Deductions window and you will get a window listing the groups assigned to the window. Double-click on the group(s) listed in the window to check if the deduction you need is listed there.
Like Ram Manohar suggested, also check the deductions side of the cumulation ID.
Also, go through the standard Remuneration Statement for India IN01 that's provided to check your form.
Let me know what you find.
Vivek

Fields are not appearing in the configuration

HI All,
I created new view in the BP_HEAD component and view type is table view. In that view i created model context node and it is referring to BuilHeader bol object. these context node fields are not showing in the configuration tab. if i expand my context node folder in the configuartion , it is shoiwng empty. I am facing this problem.I changed view type table to form also it is not working.Could you help me any one .
i

Hi venky
Check the generation of the context node class , check its super class it should be CL_BSP_WD_CONTEXT_NODE_TV, and your view code must support the configuration. check the below view code snippet for table
here replace the partner with your view variable which represents the controller class context node
<%@page language="abap" %>
<%@extension name="thtmlb" prefix="thtmlb" %>
<%@extension name="chtmlb" prefix="chtmlb" %>
<%@extension name="bsp" prefix="bsp" %>
<%
DATA: lv_xml TYPE string,
lv_visible_row_count TYPE string.
lv_xml = controller->CONFIGURATION_DESCR->GET_CONFIG_DATA( ).
%>
<chtmlb:configTable xml = "<%= lv_xml %>"
 id = "ResultTable"
 navigationMode = "BYPAGE"
 onRowSelection = "Select "
 selectionMode = "<%= PARTNER->selection_mode %>"
 table = "//PARTNER/Table"
 usage = "SEARCHRESULT"
 visibleRowCount = "10"
 width = "100%"
 actionsMaxInRow = "6"
 selectedRowIndex = "<%= PARTNER->selected_index %>"
 selectedRowIndexTable = "<%= PARTNER->selection_tab %>" />
The generated method GET_TABLE_LINE_SAMPLE must refer to BOL structure that you refered
say for example if you are creating table for BuilHeader the generated code should contain the structure CRMST_HEADER_OBJECT_BUIL. (sample code snippet is given below)
 TYPES: BEGIN OF line.
 include type CRMST_HEADER_OBJECT_BUIL.
 TYPES:
 END OF line.
 CREATE DATA rv_sample TYPE line.
Thanks & Regards
Raj

Solved: message "You are not connected to the Internet" after idle sleep

Summary: What worked for me was to turn off IPv4 and IPv6 on my unused interface.
The problem was that after my computer had been in sleep mode, Safari would say:
"You are not connected to the Internet."
or "softwareupdate -l" would say:
"This computer’s Internet connection appears to be offline."
Yet Firefox worked OK and traceroute also showed the connection was fine.
Digging deeper (though only later, after I found the command), "scutil -r" indicated a problem with DNS lookup:
$ scutil -r developer.apple.com
Not Reachable
$ scutil -r 17.254.2.129
Reachable
I'm using 10.6.6 on a Mini (model Macmini1,1), which has a wired ethernet connection on en0 and an AirPort on en1. I use the wired connection, but I also configured the AirPort just because, and then turned it off in the network preferences. I use a static (manually-configured) IPv4 address on en0 and DHCP on en1 (when it's up, which is only for experimenting). I don't use IPv6 as such, though I've left it enabled.
I was initially confused, thinking the problem was intermittent, though it's not. I tended to assume that because the display had gone into standby the computer must be sleeping, without checking that the power light was dimming and brightening, indicating sleep mode. Later I found the "pmset -g" command to display the power management settings. Among the settings is:
ttyskeepawake 1
This means that if I had a shell session open in Terminal, which I did quite often when investigating the problem, the computer put itself into idle sleep later than if I didn't have the session open. The times in Energy Saver settings in System Preferences seem not to be very accurate anyway. For instance, with the default computer sleep and display sleep settings of 10 minutes and a shell session open, I've seen it take 17m25s for the display to blank and a further 14m16s for the computer to sleep, for a total of 31m41s.
The problem only occurs after an idle wait. It doesn't occur after a software sleep (entered from the Sleep entry in the Apple menu or using the keyboard shortcut) or after pressing the power button momentarily.
One way I found to fix the problem was to turn the AirPort on and then off again through Network Preferences (or the menu bar item). Later I found that disconnecting and reconnecting the ethernet cable also fixed the problem. I hoped to find a better way.
What led me to this halfway house solution was noticing that if I turned the AirPort on and then off again, entries for en1 still remained in the routing table. These entries were for IPv6 link-local and multicast networks, as in this edited output from "netstat -nr":
Internet6:
Destination Gateway Flags Netif Expire
::1 ::1 UH lo0
fe80::%lo0/64 fe80::1%lo0 Uc lo0
fe80::1%lo0 link#1 UHL lo0
fe80::%en0/64 link#4 UC en0
fe80::216:cbff:fexx:xxxx%en0 0:16:cb:xx:xx:xx UHL lo0
fe80::%en1/64 link#6 UC en1
ff01::/32 ::1 Um lo0
ff02::/32 ::1 UmC lo0
ff02::/32 link#4 UmC en0
ff02::/32 link#6 UmC en1
Even with the AirPort switched off, ifconfig showed it as being up:
en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
ether 00:17:f2:xx:xx:xx
media: autoselect (<unknown type>)
status: inactive
I don't know if these observations are relevant, but anyway they led me to the solution (well, workaround). The way I finally fixed the problem was as follows.
1. Create a new location in Network Preferences. (This isn't strictly necessary, but it allowed me to keep the AirPort configuration (including my wireless password) intact in the default Automatic location.)
* Click on the Location pull-down
* Click Edit Locations...
* Click +
* Enter new location name (I called mine Wired-static)
2. Configure the Ethernet interface with its static address. (If using DHCP, I'd have skipped this step as DHCP is the default.)
3. Go to the AirPort configuration (even though it's shown as Off).
* Click on Advanced
* Click on TCP/IP
* Select Off for both IPv4 and IPv6
4. After clicking Apply in Network Preferences, a new "Location" item appears in the Apple menu between "Dock" and "Recent Items". Select the new location. This setting sticks across boots.
I hope this helps anyone else in a similar situation. Maybe if you use wireless it would help to turn off IPv4 and IPv6 on the Ethernet interface?

Try:
- A reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset Network Settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- DId the iPod ever successfully connect to the network?
- Does the iPod successfully connect to other networks?
- Do other devices successfully connect with your network?

Mi emails notifications are not appearing as other applications, only can see them when open my mails

Hi I have an Iphone 5c and set my email account (local provider company).
I can receive mails perfectly and also send mails but the notification of a new mail comming is not appearing with the red globe on top of the Mail as suppose to.
Once I entered the mail application the mails start to download and the red globe appears but not before just after I entered tha application.
the other applications I have like whatsapp and bbm are working perfectly. I check the notification center many times and looks ok for me but don't know what could be the problem. If someone can help me I really appreciate...

Push mail is automatically sent to your device when it arrives at the email server. Your email account has to support this.
Settings > Mail, Contacts, Calendars > Fetch New Data > Push > ON, your account > select Push (if available), Fetch, or Manual
Below list of accounts:
Fetch > select interval

Videos does not appear in the list after syncing

I have synced my 10 minutes music video to my 3gs and the syncing already completed without any error.
but then i could not find my video in my 3gs. i already checked the include music videos in music sync. i'm sure the video is in mp4 format.
before this, it shows no videos, you can download videos from itunes, but after i sync this video, it turn out there's like a list of videos but it does not appear. only an empty list without nothing to select on.
i even try to find the video using spotlight search and it resulted none in my phone but in itunes it shows the video is in there. i wonder where the video goes.. = ="

I think my question wasn't clear. I know how to display the attachment header (I use classic layout) but the problem is that the paperclip icon does not appear against the messages that contain attachments. See screenshot below. The attachment column is displayed but is blank. These are my sent items and I know for a fact that most of them have attachments. Can you help?

Fcx4 bin clips are not appearing in the viewer after clicking on them.

Similar Messages

Maybe you are looking for