FDM for PBCS - Drill Thru does not return any records in landing page

This is referring to the Data Management functionality in PBCS, not on-premise FDMEE.
I loaded in a file, for example:
Region|Product|Account|Amount
10|100|1000|9,000
10|100|1000|1,000
In FDM, I am using a multi dimensional map to derive another field. For example, if Region is 10 and Product is 100, than Department = 555.
so in FDM, I would end up with
10|100|1000|555|9,000
10|100|1000|555|1,000
Once loaded to PBCS, that loads in as:
10|100|1000|555|10,000
I built a form that shows this intersection, and then 'drilled to source'. When I get to the FDM landing page, there are no records shown. Is this because the derived field (department) does not exist in the source, or am I doing something wrong?
Appreciate any help.

Do you have access to the server logs by any chance?
Can you check the dimension class for your Scenario dimension in your target application? is it set to SCENARIO?
not showing source records is typically related to FDMEE not finding values in TDATASEG table.
HTH

Similar Messages

Very Very Urgent Issue: Restricted Key Figure does not return any data

Hi all,
Please help me solving this urgent issue.
created customer exit variable on characterstics version and also
other customer exit variable on Value type.
I coded that in variable exit. Problem is when I include these in
restrickted keyfigure My query does not return me any data.
But if I remove from restrickted key firgure and put it as normal
charaterstics I see the variable is getting populated.
Also in RSRT the SQl generated when these are included in RKF is not
correct.
I debugged and know they are getting populated. As when included in RKF
I can also see the values of customer exit variables from information
tab.
I also know that there is data in cube for those restrictions.
I posted one OSS Notes regarding this urgent issue. But got no reply from SAP.
FYI: We are using BEx 3.5 Browser SAP GUI 6.4 Patch 20 BW Patch 11
Thanks
SAP BW
**Please do not post the same question twice: Very Urgent Issue: Restricted Key Figure does not return any data

Hi,
Everyone out there this is very urgent. If someone can help me solving this problem.
We are using BEx 3.5 Browser SAP GUI 6.4 Patch 20 BW Patch 11.
I posted one oss notes also regarding this issue. But got no reply from SAP.
So, Please help me solving this issue.
Thanks
SAP BW

Xquery does not return any results on 10.2.0.4, does work on 10.2.0.5

I have a Xquery statement that works as expected on Oracle 10.2.0.5 but does not return any results on Oracle 10.2.0.4.
Is this the result of a badly written query? A bug in 10.2.0.4?
Is there a way to rewrite the query so that is does work on 10.2.0.4?
Testcode:
declare
   l_xml xmltype;
   -- Select layers with TileMatrixSet EPSG:28992
   cursor c_layer(p_xml xmltype) is
      select t.*
        from xmltable(xmlnamespaces(default 'http://www.opengis.net/wmts/1.0'
                                   ,'http://www.opengis.net/ows/1.1' as "ows"
                                    ,'http://schemas.opengis.net/gml' as "gml"
                                    ,'http://www.w3.org/1999/xlink' as "xlink"
                                    ,'http://www.w3.org/2001/XMLSchema-instance' as "xsi")
                      ,'for $d in //Layer[TileMatrixSetLink/TileMatrixSet="EPSG:28992"] return $d' passing
                      p_xml columns title varchar2(100) path 'ows:Title'
                      ,format varchar2(100) path 'Format'
                      ,style xmltype path 'Style') as t;
begin
   l_xml := xmltype.createxml('<?xml version="1.0" encoding="UTF-8"?>
<Capabilities xmlns="http://www.opengis.net/wmts/1.0"
xmlns:ows="http://www.opengis.net/ows/1.1"
xmlns:xlink="http://www.w3.org/1999/xlink"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:gml="http://www.opengis.net/gml" xsi:schemaLocation="http://www.opengis.net/wmts/1.0 http://schemas.opengis.net/wmts/1.0/wmtsGetCapabilities_response.xsd"
version="1.0.0">
<Contents>
<Layer>
    <ows:Title>brtachtergrondkaart</ows:Title>
    <ows:Identifier>brtachtergrondkaart</ows:Identifier>
    <Style isDefault="true">
      <ows:Identifier>_null</ows:Identifier>
    </Style>
    <Format>image/png8</Format>
    <TileMatrixSetLink>      <TileMatrixSet>EPSG:28992</TileMatrixSet>
    </TileMatrixSetLink> </Layer>
<Layer>
    <ows:Title>top10nl</ows:Title>
    <ows:Identifier>top10nl</ows:Identifier>
    <Style isDefault="true">
      <ows:Identifier>_null</ows:Identifier>
    </Style>
    <Format>image/png8</Format>
    <TileMatrixSetLink>      <TileMatrixSet>EPSG:28992</TileMatrixSet>
    </TileMatrixSetLink> </Layer>
<Layer>
    <ows:Title>bgt</ows:Title>
    <ows:Identifier>bgt</ows:Identifier>
    <Style isDefault="true">
      <ows:Identifier>_null</ows:Identifier>
    </Style>
    <Format>image/png8</Format>
    <TileMatrixSetLink>      <TileMatrixSet>EPSG:28992</TileMatrixSet>
    </TileMatrixSetLink> </Layer>
</Contents>
</Capabilities>');
   for r_layer in c_layer(l_xml)
   loop
      dbms_output.put_line(r_layer.title);
   end loop;
end;Result on 10.2.0.5:
brtachtergrondkaart
top10nl
bgt

This one's strange indeed.
I can reproduce on 10.2.0.4 and one of the following seems to fix it :
1) Specifying the column list in the SELECT, instead of t.* :
   -- Select layers with TileMatrixSet EPSG:28992
   cursor c_layer(p_xml xmltype) is
      select t.title, t.format, t.style
        from xmltable(or,
2) Using an extended FLWOR expression :
for $d in //Layer
where $d/TileMatrixSetLink/TileMatrixSet = "EPSG:28992"
return $dMaybe you've already noticed but the problem only occurs within a PL/SQL context.
The same query run from SQL is OK.

How to Create a record if vo.executequery does not return any rows

I would like to update a single record on adf form. However if the record does not exist would like to create a row and save it in the table.
The user does not want to add a "create" button on the screen. Hence would need to add the create code if vo.execute does not return any rows...
How to add this and where to add?

you can have a TF router for for exists and does not exist and based on that execute transient VO and other VO.
Add a method call activity like below to create a row in transient VO
public Row createRow()
ViewObjectImpl tVO = (ViewObjectImpl)getTVO();
tVO.executeEmptyRowSet();
Row newRow = tVO.createRow();
tVO.setCurrentRow(newRow);
tVO.insertRow(newRow);
return newRow;
}

Install maverik on my MacBook Pro, I had no problem. Two days later I was shut down suddenly and reboot with a closed padlock and asking me for a password that does not match any of mine. What I can do?

Install maverik on my MacBook Pro, I had no problem. Two days later I was shut down suddenly and reboot with a closed padlock and asking me for a password that does not match any of mine. What can I do?

Try booting to the Recovery drive, running Disk Utility and Repair disk and Repair Permissions.
1. Reboot and immediately hold down command and R (two keys).
2. When you see the screen shown on this page, select Disk Utility and continue.
3. When DU is running, select the hard drove on the left, First Aid and Repair Disk.
4. After Repair Disk, click Repair Permissions.
Quit DU and restart.

Can I convert a proxy for a class that does not has any interfaces?

Can I convert a proxy for a class that does not has any interfaces?

Hi.
I can hardly understand your question: what do you want your proxy (what kind of proxy?) to be converted into?
All I can tell you is the following: Proxies created using java.lang.reflect.Proxy can only be created using an interface. This interface has to be implemented by the proxied object. So: no interface, no java.lang.reflect.Proxy.
Bye.

Res.getPathTranslated() does not return correct URL of the page requested

Hi,
The res.getPathTranslated() statement in the below code (in doFilter method) does not return the correct URL of the requested webpage.
Whenever a web page is accessed using a return statement (eg : return "nextPage"; ) inside a button's action method or a hyperlink's action method, the res.getPathTranslated() returns the URL of the current webpage instead of returning the URL of the webpage that is actually requested.
For example if there is a button on the page http://localhost:29080/MyJaas/faces/firstPage.jsp
And the button_action() is as follows
button_action()
return "nextPage";
The res.getPageTranslaged() returns "http://localhost:29080/MyJaas/faces/firstPage.jsp" instead of "http://localhost:29080/MyJaas/faces/nextPage.jsp"
However, if the webpage is requested by populating the URL property of the hyerlink in creator IDE, the res.getPathTranslated() returns the correct (requested) web page.
How to make res.getPathTranslagted() return the correct URL when the webpage is accessed from hyperlink's / button's action method?
I know that the explation is not very clear, so please bear with me. Let me know if you need more clarificatons. Thanks in advance for showing interest in this issue.
And by the way, the code below is the same as that used in Jaas Authentication tutorial :- http://developers.sun.com/prodtech/javatools/jscreator/reference/techart/2/jaas_authentication.html
package jaasauthentication;
import javax.servlet.Filter;
import javax.servlet.FilterChain;
import javax.servlet.FilterConfig;
import javax.servlet.http.HttpSession;
import javax.servlet.ServletRequest;
import javax.servlet.ServletResponse;
import javax.servlet.ServletException;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletResponse;
public class SecurityFilter implements Filter{
    /** Creates a new instance of SecurityFilter */
    private final static String FILTER_APPLIED = "_security_filter_applied";
    public SecurityFilter() {
    public void init(FilterConfig filterConfig) {
    public void doFilter(ServletRequest request, ServletResponse response, FilterChain chain) throws java.io.IOException, ServletException{
        HttpServletRequest req = (HttpServletRequest)request;
        HttpServletResponse res = (HttpServletResponse)response;
        HttpSession session = req.getSession();
        String requestedPage = req.getPathTranslated();
        String user=null;
        //We dont want to filter certain pages which include the Login.jsp/Register.jsp/Help.jsp
        if(request.getAttribute(FILTER_APPLIED) == null) {
            //check if the page requested is the login page or register page
            if((!requestedPage.endsWith("Login.jsp")) && (!requestedPage.endsWith("Register.jsp")) && (!requestedPage.endsWith("Help.jsp"))){
                //Requested page is not login.jsp or register.jsp therefore check for user logged in..
                //set the FILTER_APPLIED attribute to true
                request.setAttribute(FILTER_APPLIED, Boolean.TRUE);
                //Check that the session bean is not null and get the session bean property username.
                if(((jaasauthentication.SessionBean1)session.getAttribute("SessionBean1"))!=null) {
                    user = ((jaasauthentication.SessionBean1)session.getAttribute("SessionBean1")).getUsername();
                if((user==null)||(user.equals(""))) {
                    res.sendRedirect("Login.jsp");
                    return;
        //deliver request to next filter
        chain.doFilter(request, response);
    public void destroy(){
}

Guys any solution for the above problem?
Right answer fetches 10 duke dollars..

Function Does Not Return any value .

Hi ,
I am wrtting the below funtion without using any cursor to return any message if the value enters by parameters
does not match with the value reterived by the function select statement or it does not reterive any value that
for the parameters entered .
E.g:
CREATE OR REPLACE FUNCTION TEST_DNAME
(p_empno IN NUMBER,p_deptno IN NUMBER)
RETURN VARCHAR2
IS
v_dname varchar2(50);
v_empno varchar2(50);
V_err varchar2(100);
v_cnt NUMBER := 0;
BEGIN
SELECT d.dname,e.empno
INTO v_dname ,v_empno
FROM scott.emp e , scott.dept d
WHERE e.empno=p_empno
AND d.deptno=p_deptno;
--RETURN v_dname;
IF p_empno IS NOT NULL AND p_deptno IS NOT NULL
THEN IF v_dname is NULL THEN
v_err :='Not Valid';
RETURN v_err;END IF;
ELSIF p_empno IS NOT NULL AND p_deptno IS NOT NULL
THEN IF v_dname is NOT NULL THEN
RETURN v_dname; END IF;
ELSE
RETURN v_dname;
END IF;
END;
Sql Statement
SELECT TEST_DNAME(1234,30) FROM dual
AND IF I enter a valid combination of parameter then I get the below error :
e.g:
SQL> SELECT TEST_DNAME(7369,20) FROM dual
2 .
SQL> /
SELECT TEST_DNAME(7369,20) FROM dual
ERROR at line 1:
ORA-06503: PL/SQL: Function returned without value
ORA-06512: at "SCOTT.TEST_DNAME", line 24
Where I am missing .
Thanks,

Format you code properly and look at it:
CREATE OR REPLACE
   FUNCTION TEST_DNAME(
                       p_empno IN NUMBER,
                       p_deptno IN NUMBER
    RETURN VARCHAR2
    IS
        v_dname varchar2(50);
        v_empno varchar2(50);
        V_err varchar2(100);
        v_cnt NUMBER := 0;
    BEGIN
        SELECT d.dname,
                e.empno
          INTO v_dname,
                v_empno
          FROM scott.emp e,
                scott.dept d
          WHERE e.deptno=d.deptno
            AND e.empno=p_empno
            AND d.deptno=p_deptno;
        --RETURN v_dname;
        IF p_empno IS NOT NULL AND p_deptno IS NOT NULL
          THEN
            IF v_dname is NULL
              THEN
                v_err :='Not Valid';
                RETURN v_err;
            END IF;
        ELSIF p_empno IS NOT NULL AND p_deptno IS NOT NULL
          THEN
            IF v_dname is NOT NULL
              THEN
                RETURN v_dname;
            END IF;
         ELSE
           RETURN v_dname;
       END IF;
END;
/Both p_empno and p_deptno in
SELECT TEST_DNAME(7369,20) FROM dualare not null. So SELECT will fetch some v_dname and v_empno. Since p_empno and p_deptno iare not null your code will go inside outer IF stmt and will execute its THEN branch. That branch consist of nothing but inner IF statement. And since v_dname is NOT NULL it will bypass that inner IF and exit the outer IF. And there is no RETURN stmt after that outer IF. As a result you get what you get - ORA-06503. Also, both if and elsif in your code check same set of conditions which makes no sense.
SY.

Very Urgent Issue: Restricted Key Figure does not return any data

Hi all,
created customer exit variable on characterstics version and also
other customer exit variable on Value type.
I coded that in variable exit. Problem is when I include these in
restrickted keyfigure My query does not return me any data.
But if I remove from restrickted key firgure and put it as normal
charaterstics I see the variable is getting populated.
Thanks
SAP BW

Hi,
Everyone out there this is very urgent. If someone can help me solving this problem.
We are using BEx 3.5 Browser SAP GUI 6.4 Patch 20 BW Patch 11.
I posted one oss notes also regarding this issue. But got no reply from SAP.
So, Please help me solving this issue.
Thanks
SAP BW

LOV does not return value to the base page sometimes

Hi,
I have created messageLOV type items. These LOVs do return value to the base page usually. We have a user in Uruguay who is trying to use the page which has the LOVs. He says the LOV takes a long time to return to the main page after he clicks on quick select and also the value does not get populated in the main page.
We have not been facing any such problem here in India. The LOV has been tested rigorously with no issues as such.
Can you please suggest a reason why such a problem is occuring? Expecting your replies soon
Thanks,
Priya

Thiyaga, did you read the devguide or the tutorial ?
Can you please give me the inputs about the creation of LOV and it requires how many lov mappings as mandatory?
This is there in the devguideHow to identify the mapping fields of an LOV which is already existing in the base page to reproduce in a similar way and need to do a customization on top of it ?
Open the page XML and you can find the LOV mappings.Tapash

Hey...... my ipod touch 2g wifi dose not work.... it connects to the network but does not open any of the web pages or internet acess!! HELP ME???

Someone plz help me out with this problemm... My IPOD TOUCH 2G connects to the wifi network but could not open any of the web pages... i've tried SAFARI, FIREFOX, and OPERA.... nothing in wifi retrieves data!!! it makes me so angry...
possible reasons???? i've searched net.. and many of the people r having these problems... maybe with the ne iOS4.2.1
HELPPPPPPPPPPP????
...Fateh

- Reset the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Power off and then back on your router
- Reset network settings: Settings>General>Reser>Reset Network Settings
- The troubleshooting here:
iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections
- Does the iPod successfully connect to other routers?

Data Arrives to PSA but does NOT add any records to ODS.... WHY?

Hi Gurus:
I have a unique isseu. My dada form an info-object arrives successfully to PSA. But this data does not get added to ODS. I know that ODS does not contain these records and PSA does show these records. There are no errors but zer records are added to the ODS. Has anyone come across this before? Am I missing somethign??
Joe-Smith

r u loading parallelly to PSA and data target (or) PSA and then into Data target..
which flow u r following...
otheriwse u delete that request in DSO as anyhow it got 0 records from PSA...
and go to PSA(data source) manage and select the request u need to update and click on UPDATE WITH SCHEDULER option in that window and start...
let us know the status...after that...
rgds,
nkr

Datasource 0WS_TAROBJ_ATTR does not extract any record

I am using the datasource 0WS_TAROBJ_ATTR to get data from CRM to infoobject 0WS_TAROBJ. However, this extractor is not loading any record.
According SAP information and some forum discussion, I have found that the datasource WS_TAROBJ_ATTR loads data from the table CRM_SVY_RE_TAOBJ.
There is no data into this table, even in production environment.
I have found the SAP Note 785261 (CRM survey: Missing entries in table CRM_SVY_RE_TAOBJ) that describes a similar situation. I have applied it and after that I have provide a full repair from 0SVY_DATA_1 in order to fill out this table. However it did not work properly and the table still empty.
Could you please, someone helps me on this issue?
Thanks in advance,
Silvio Messias

No comments!

Browser REFRESH button does not return to the same iView/Page

Hi,
In SDN site I have seen that in whichever menu i am in, if i use the browser refresh button i return to the same page. But this does not happen on my enterprise portal.
Can you please let me know, how to set / configure the enterprise portal EP7 such that, if am in any iview and use the browser refresh, then i am returned to the same iview / page and not to the first page of the menu. Currently in my portal, when i hit the browser REFRESH button, it takes me to the first page/iview.
Thanks,
Anirban

Dear Romano,
Thanks for your reply. With the help of the document link that you have provided, i have been able to achieve my target partially. Currently i am able to refer to the iView and Role directly using the QuickLink and when i access that particular iView & Role using the QuickLink and then do a refresh, the same screen appears. This part is working fine. But i have one issue.
But generally a iView/Role is accessed not via the QuickLink on the browser but by clicking on the Role on Navigation Level 1. Even though this Role has a QuickLink, it is not visible in the address bar since the QuickLink URL was not used for reaching the Role. In such a situation, when we press the REFRESH button, the iView / Role is vanished and the browser returns to the first default page of the portal.
Can we somehow make it such that whenever the Role is accessed in the Navigation Levels, it can be accessed via QuickLinks and the QuickLink URL is displayed on the address bar ? If this can be achieved, then i guess the problem will be solved.
I hope i have been able to get across my point. Hoping to hear a positive reply from your side.
Thanks in advance.
Regards,
Anirban Kundu.

Faces scan does not return any tags

I have now for about 3rd time scanned my entire library for faces (meaning deleting the face_whatever files over again). Every time the scan is run, it takes about 5 hours (65 GB of pictures).
After the scan is done, there are exactly no face suggestions to be found anywhere on the cork board.
I am getting quite frustrated, Google Picasa never acted this way on my previous computer. I am thinking of going back to Picasa if this issue doesn't get solved soon...

After the scan is done, there are exactly no face suggestions to be found anywhere on the cork board.
1 - have you watched the faces tutorial? -- http://www.apple.com/findouthow/photos/#faces
2 - the process does not include initial addition of faces on the corkboard - the scan identifies potential people in a photo and you start the corkboard by selecting photos and identifying people in the photo - *those people that you identify are then added to the corkboard* and when you open their corkboard entry you will get suggestions for other photos that contain that person - *you accept or reject each suggestion* and the number of photos grows. Nothing is ever added to the corkboard without your action to approve it.
I am getting quite frustrated, Google Picasa never acted this way on my previous computer. I am thinking of going back to Picasa if this issue doesn't get solved soon...
No problem - do what ever makes you happy - I'm not sure why you think that threatening the users here that you are going to leave makes you feel any better about anything - but what ever
LN
Message was edited by: LarryHN

FDM for PBCS - Drill Thru does not return any records in landing page

Similar Messages

Maybe you are looking for