FDM-generated SQL statement in log file?

Hello all, hopefully a simple question:
When you perform an import using FDM, I know that behind the scenes a SQL SELECT statement is composed and executed against the database server. My question: is the actual SQL statement kept in a log somewhere (so that we can see it?) In our case it's an Oracle DB server and we're using the ERPI Adapter; not sure if that's relevant. We would like to grab that SQL statement and use it as a jumping-off point for some other things.
Thanks in advance for anything you can offer.

The SQL Statement is not written to the log for the adapter. The only things that are logged are what show in the adapter log file if you enable loggin for the ERPi source adapter in the "Get Data" action.

Similar Messages

How to examine the generated SQL statement in Receiver JDBC Adapter

I have been searching this forum how to display te generated sql statement (by the jdbc receiver adapter).
The only suggestion is to use RWB, but I was unable to find any details about how to do so.
Any help is appreciated

Hi,
To add, u can see the SQL Statements in Audit log of RWB.
Select Message Monitoring-> Adapter Engine. choose ur entry and click on Details option button, u can see the SQL Statements in Audit Log.
Regards,
Sudharshan
Message was edited by:
Sudharshan Aravamudan

SCOM2012 - SQL 2012 DB Log File Discovery isssue

Dear Experts,
I have some SQL 2012 servers, that has few log files (.LDF) stored in a specific drive. SCOM discovers these files but, has a wrong value in 'Display Name'.
For example. The log file name on the server is PROD and the file path c:\SQL\PROD.LDF, but in the console it shows name as UAT and file path as c:\SQL\PROD.LDF (file path is correct as expected). It always stays in critical state stating that the log file
is out of space while it is not the case.
We even have tried wiping the agent off the server and reinstalling it. But it did not fix the issue. When I remove the agent 'Operations Manager' under event log disappears, but when I reinstall the agent after few days, I see the log created,
but with older events too dated well prior to the uninstallation.
And the other thing is, we had this issue while using 2007 R2 and even after switching over to 2012 it continues.
SCOM 2012 was a fresh setup and was not an upgrade.
Hope someone could help me out with this.
Regards,
Saravanan

Hi Niki,
Sorry for the delay in reply.
I hope the image can explain better. I have that log file on a SQL server, which is being discovered with a wrong File name but with the correct path. The actual file name what I see on the server is exactly the same as it shows in the File path in console.
But 'File Name' in the console is completely irrelevant. Also, this log file is in critical state for log file full, which is statistically false. There are few other log files on this server, for which we do not have this issue.
Please let me know if any other information would be required
Regards,
Saravanan

How to export the result from executing sql statement to excel file ?

HI all,
Great with Oracle SQL Developer, but I have have a trouble as follwing :
I want to export the result from executing sql statement to excel file . I do easily like that in TOAD ,
anyone can help me to do that ? Thanks so much
Sigmasvn

Hello Sue,
I just tried to export to excel with the esdev extension and got java.lang.NumberFormatException. I found the workaround at Re: Windows Multi-language env, - how do I set English for application lang?
open the file sqldeveloper\jdev\bin\sqldeveloper.conf and add the following two lines:
AddVMOption -Duser.language=en
AddVMOption -Duser.country=USyet now my date formats in excel are 'american-style' instead of german. For example 01-DEC-01 so excel does not recognize it as date and therefore I can not simply change the format.
When export to excel will be native to 1.1 perhaps someone can have a look at this 'feature'
Regards
Marcus

Not able to View generated SQL statement

Hi,
In order to view the generated SQL statement in Receiver JDBC Adapter,
i have done logSQLStatement as true in CC still not able to view in RWB,
also mesg protocol i m using in CC is "xml sql format", is it bcos of this i am not able to ?
If yes, then how can i see that sql string?
Regards,
Pratibha

Pratibha,
In our JDBC scenario the message protocol is also set to XML SQL Format
The Integration Process has a mapping step of type XSL that uses an Imported Archive to create the SQL select statement. Then there is a synchronous Send step for the JDBC component
Both this SQL statement and the returned SQL result are available in the XML message monitor SXMB_MONI
Regards,
Mike

UD Connect Generated SQL Statement

Hi All,
Can anyone tell me if it's possible to influence the generated SQL statement? We need to be able to use the order by clause so as to get the records in the correct order.
Any help much appreciated.
Thanks
Craig

Hi
Yes its possible in THIS WAY.
CASE-1
In UD Connect we have the DATA in a BASE TABLE. When we execite the under like DATASOURCE (UD-CONNECT). The dependant Info PACK brings the complete data to PSA. After the DATA LANDS in PSA. We can sort out in the same way how can SORT in the SQL Statement method. But to do this you have to PUT a Start routine at infopack level.
Case-2
You have to use a store procedure out side the SAP BI .

Tkprof : 0 user SQL statement in trace file

Hello!
Please explain , what is difference of tkprof-converting of user session trace file and an internal/background process ?
Get I message "0 user SQL statement in trace file" cause this difference?
In my target session I issued :
begin
sys.dbms_system.set_ev(...., .., 10046, 12, '');
end;
begin
sys.dbms_system.set_ev(..., .., 10053, 1, '');
end;
/Thanks and regards,
Pavel

Did you try to tkprof a 10053 trace ?
That is not going to show anything. 10053 traces are meant to be read as they are. tkprof is there to deal with 10046 traces.

Where to see generated SQL statement from jdbc adapter?

Hi everybody,
where can I see the generated SQL statement from JDBC adapter?
Regards Mario

Yes and True lterally means the same, but alas XI does not understand literature..
Just checked the note as well, as you are correct!
Regards
Bhavesh

TopLink does not generate SQL statements for inserting new objects

TopLink does not generate SQL statements for inserting new objects. Why?
Thanks in advance...

Please see the response in
Why does not unitofwork.commit write data to the database?
Regards,
Chris

Are there any possible reason RMAN generates some corrupt archive log files

Dear all,
Are there any possible reason RMAN generates some corrupt archive log files?
Best Regards,
Amy

Because I try to perform daily backup at lunch time and found out it takes more than 1 hour had no any progress. Normally we take around 40 minus. The following is the log file:
RMAN> Run
2> {
3> CONFIGURE CONTROLFILE AUTOBACKUP ON;
4> CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/u03/db/backup/RMAN/%F.bck';
5> CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 1 DAYS;
6> allocate channel ch1 type disk format '/u03/db/backup/RMAN/backup_%d_%t_%s_%p_%U.bck';
7> backup incremental level 1 cumulative database plus archivelog delete all input;
8> backup current controlfile;
9> backup spfile;
10> release channel ch1;
11> }
12> allocate channel for maintenance type disk;
13> delete noprompt obsolete;
14> delete noprompt archivelog all backed up 2 times to disk;
15>
16>
using target database controlfile instead of recovery catalog
old RMAN configuration parameters:
CONFIGURE CONTROLFILE AUTOBACKUP ON;
new RMAN configuration parameters:
CONFIGURE CONTROLFILE AUTOBACKUP ON;
new RMAN configuration parameters are successfully stored
old RMAN configuration parameters:
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/u03/db/backup/RMAN/%F.bck';
new RMAN configuration parameters:
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/u03/db/backup/RMAN/%F.bck';
new RMAN configuration parameters are successfully stored
old RMAN configuration parameters:
CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 1 DAYS;
new RMAN configuration parameters:
CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 1 DAYS;
new RMAN configuration parameters are successfully stored
allocated channel: ch1
channel ch1: sid=99 devtype=DISK
Starting backup at 31-MAR-09
current log archived
After that I go to archive log directory "/u02/oracle/uat/uatdb/9.2.0/dbs" and use ls -lt command to see how many archive logs and my screen just hang. After we found out that we cannot use ls -lt command to read arch1_171.dbf
archive log, the rest of archive logs able to use ls -lt command.
We cannot delete this file as well. We shutdown database abort and perform check disk...... and fix the disk error and then open database again. Everything seems back to normal and we can use ls -lt command to read arch1_171.dbf.
The strange problem is we have the same problem in Development and Production..... one ore more archive logs seems to be corrupted under the same directories /u02/oracle/uat/uatdb/9.2.0/dbs.
Does anyone encounter the same problem?
Amy

Run sql statement from batch file

How can we execute SQL Statement using Batch file???
I did a test.
create batch file test.bat
sqlplus "username@db /pass" @\script.sql
script.sql file has following statement
select sysdate from dual;
exit
it is working but I want to call sql statement in the same batch file instead of calling .sql script file. how can I do that any idea..

This is very easy in unix shell scripting, but AFAIK, not available with Windows. It's a function of how the shell/command processor handles input redirection.

How can I generate and/or retrieve log files from iPad

How can I generate and/or retrieve log files from iPad?
OBS!
There are NO files apearing in ~/Library/Logs/CrashReporter/MobileDevice/<name of iPad> so where else can i find it?
I want to force it to produce a log, or find it within the iPad.
It is needed for support of an app.

Not sure on porting out the log data, but you can find it under General->About->Diagnostic&Usage->Diagnostic&Usage Data. It will give you a list of your log data, and you can get additional details by selecting the applicable log you are looking for. Hope this helps.

Unable to view SQL Request in Log files

Hi Folks,
I am facing an issue which I am unable to find out the solution to view the physical query generated in log files in Presentation Services.
Below is the SQL Request generated but I want to view the exact physical query i.e SQL Request which is hitting DB.
So please guiude me to resolve this issue, I guess it is because of Initialization blocks created which is blocking to view the SQL request.
-------------------- SQL Request:
set variable LOGLEVEL = 7;SELECT "- Policy Effective-Start Date"."Start Quarter" saw_0, "- Insurance Policy Facts".Revenue saw_1, "- Insurance Policy Facts"."# Insurance Policies" saw_2, "Insurance Policy".Status saw_3, "Insurance Policy".Type saw_4 FROM "Insurance Policies" WHERE ("Insurance Policy".Type = 'Policy') AND ("- Policy Effective-Start Date"."Start Julian Day Number" BETWEEN VALUEOF(CURRENT_JULIAN_DAY)-365 AND VALUEOF("CURRENT_JULIAN_DAY")) ORDER BY saw_0, saw_3, saw_4
/* QUERY_SRC_CD='rawSQL' */
Regards
Dj

There is no Enterprise Edition of SSMS. There is SSMS Basic and SSMS Complete. Prior to 2012 sp1, only SSMS Basic were available with Express Edition - but as of 2012 sp1 Expredd also offers SSMS Complete. SSMS Complete is selected bu default when you install
SSMS (unless you are prior to 2012 sp1 and are using Express, of course).
However, even SSMS Basic *should* show Agent assuming you have permissions for that. This is hearsay, but from trusted sources. Here is what to do:
Check what is installed for the machine from where you are running SSMS. You can do that using SQL Server Installation Center - see this blog post: http://sqlblog.com/blogs/tibor_karaszi/archive/2011/02/10/what-does-this-express-edition-look-like-anyhow.aspx
(towards the end).
On that machine try both this problematic account as well as an account which is sysadmin. Does the sysadmin account see Agent? If so, you know permissions aren't granted properly. If not, then you know the tool is the problme.
Also try the problematic account from a machine where you know you see Agent normally. Again, this will help you assess whether the problem is the tool (SSMS) or permissions for the account.
Tibor Karaszi, SQL Server MVP |
web | blog

How to store data into database by reading sql statements from text file

how to write java program for storing data into database by reading sql statements from text file

Step 1: Create a property file to add various queries.
Step 2: Read the properties file using ResourceBundle
Step 3: Use the jdbc to execute the query read from the property file.
So in future if you need to change query no need do any modifications in java program. But depends on how you use the property file.

Help! SQL server database log file increasing enormously

I have 5 SSIS jobs running in sql server job agent and some of them are pulling transactional data into our database over the interval of 4 hours frequently. The problem is log file of our database is growing rapidly which means in a day, it eats up 160GB of
disk space. Since our requirement dont need In-point recovery, so I set the recovery model to SIMPLE, eventhough I set it to SIMPLE, the log
data consumes more than 160GB in a day. Because of disk full, the scheduled jobs getting failed often.Temporarily I am doing DETACH approach
to cleanup the log.
FYI: All the SSIS packages in the job is using Transaction on
some tasks. for eg. Sequence Cointainer
I want a permanent solution to keep log file in a particular memory limit and as I said earlier I dont want my log data for future In-Point recovery, so no need to take log backup at all.
And one more problem is that in our database,the transactional table has 10 million records in it and some master tables have over 1000 records on them but our mdf file
size is about 50 GB now.I dont believe that this 10 million records should make it to 50GB memory consumption.Whats the problem here?
Help me on these issues. Thanks in advance.

And one more problem is that in our database,the transactional table has 10 million records in it and some master tables have over 1000 records on them but our mdf file
size is about 50 GB now.I dont believe that this 10 million records should make it to 50GB memory consumption.Whats the problem here?
Help me on these issues.
For SSIS part of question it would be better if you ask in SSIS forum although noting is going to change about logging behavior. You can increase some space on log file and also should batch your transactions as already suggested
Regarding memory question about SQL Server, once it utilizes memory is not going to release unless there is windows OS faces memory pressure and SQLOS asks SQL Server to trim down its memory consumption. So again if you have set max server memory to some
where near 50 SQL Server will utilize that much memory eventually. So what you are seeing is totally normal. Remember its costtly task for SQL Server to release and take memory so it avoids it by caching as much as possible plus it caches more so as to avoid
physical reads which are costly
When log file is getting full what does below transaction return
select log_reuse_wait_desc from sys.databases where name='db_name'
Can you manually introduce chekpoint in ETL query. Try this it might help you
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP

FDM-generated SQL statement in log file?

Similar Messages

Maybe you are looking for