Feasibility for a new production system in the same environment

Dear friends,
Our management has come up with a requirement of expansion of SAP environment to cover up users in a different country for their francise over there. The options we are considering are below:
1. Implementing a whole new setup ( ECC, EP,BI, PI,Trex).
2. Expanding the lease lines between the sites in both the countries and providing access to the present setup itself with enhancement in the current hardware configuration.
or is it a good practice to keep a new Production system in the other country and add a new delivery route for the new production system within the current transport route ? How the license part may be taken care in these cases ?
Your suggestions are welcomed.
Many thanks,
SUJIT

Hi Sujit,
The answer to this question really depends on whether the new country is going to share much of the same configuration with some tailoring to local laws and requirements.  If the system is going to be the same, then there is now reason to deploy a new system unless you are reaching technical limits for hardware.  For ease of management and usage, then having one system is preferred.  You can then upgrade your network to cope with the increased load and hardware as required. 
Hope this helps,
Graham

Similar Messages

  • How to connect to the  multiple system in the same environment

    Hi Everyone ,
    We are integrating SAP EP and BOE . We are facing SSO problem ,as there are 2 system in same environment .
    Suppose we have XX1 and XX2 as BW backend system . IF Default entry on server is kept blank then we get :
    "u2022  Account information not recognized: No SAP system was passed as part of the user name and there was no default system defined. User credential validation cannot continue. " error.
    Whereas if we give XX1 as defaut system on server , then SSO is not happening we as are XX2 users .
    Anyone has any idea on how to connect to multiple backend system in the same environment .
    Edited by: shivani  mishra on May 20, 2010 11:22 AM

    Hi,
    As you can see in the help link below:
    http://help.sap.com/saphelp_nw70/helpdata/en/45/2f873d1ca96d7be10000000a114a6b/content.htm
    There is a trust system and the trusted systems. One system can trust in many other systems. You have just to configure it exporting and importing the certificates as explained in the link.

  • How much would it cost to trade in my iPod touch 5g 32 gig for a new one that's the same just a different color?

    I got a red iPod touch 5g and I just feel like getting the black one which looks nicer

    Channy321 wrote:
    ... so I can't just pay like 50$ to trade it in for a black one
    Correct.

  • Forms for a new product

    Hi Gurus
    I am in a process of deciding tool/technology for a new product developments.
    The product will have rich business functionality and will be highly database oriented. I know oracle is a preferred choice as a database also know that forms work very well with oracle database.
    The problem is small companies are not be able to pay high costs for oracle and oracle developer. And forms only work well with oracle not with other databases.
    any thoughts?
    TIA

    Hi,
    you may want to have a look at ADF JClient in Oracle JDeveloper 10g. Using ADF JClient, the database connect is a JDBC connect that works with all other databases as well. JClient is the Swing development environment n Jdeveloper and programs can run in client-server mode.
    Frank

  • I work in a High School and I am looking for a new library system that runs on the mac and is not windows based, can anyone recommend anything?

    I work in a High School and I am looking for a new library system that runs on the mac and is not windows based, can anyone recommend anything?

    That's a very broad question and difficult to answer without knowing more about you requirements.
    Try starting on this page Category review: library management software for the Mac |Part I  and part II  to get a starting point.
    regards

  • Adding a new Operating System to the list of OS'es returned with Get-SCOperatingSystem

    Is it possible to add a new Operating System to the list of OS'es that's returned by the Get-SCOperatingSystem PowerShell cmdlet?
    I have a few Linux distributions that will run fine under Hyper-V with the latest LIS improvements, but I would like to create a new entry for that said distributions as I would like it to display the correct name as the end-user is using Windows Azure Pack
    to access the virtual machines. 
    All posted advice may not be all that accurate. As always, test it in a lab before you try my advice! Best of all, the documentation is your friend.

    Never mind, I think I hacked up my own solution to the question:
    USE [VirtualManagerDB]
    GO
    INSERT INTO [dbo].[tbl_IL_OS]
    ([OSId]
    ,[Name]
    ,[Description]
    ,[Architecture]
    ,[OSFlags]
    ,[VMWareGuestId]
    ,[OSType])
    VALUES
    ('EBAB54C0-A9FA-4A3F-A21C-94775B96A6E5' /* Generate UUID */
    ,'Debian GNU/Linux 6 (64-bit)' /* Limited to 64 Chars */
    ,'Debian GNU/Linux 6 (64-bit)' /* Longer description of Linux Distro */
    ,'amd64' /* Use x86 for i386, amd64 for x86_64 */
    ,'28' /* This remains constant */
    ,'otherLinux64Guest' /* This is meant for VMware, go lookup the VMX spec files for this value */
    ,'1') /* Leave this at one, that's what the other OSes looked like */
    GO
    All posted advice may not be all that accurate. As always, test it in a lab before you try my advice! Best of all, the documentation is your friend.

  • Upon activating my Siri button, I get an unbearable screeching sound.  I already turned in my old ipad under warranty for a new one because of this same problem.  Now the newest one is doing the same thing.  Anyone else out there experiencing this?

    I'm wondering whether or not to get yet another warranty exchange for my ipad 3 over this horrible screeching sound associated with the home button.  I was told at the Apple Store by the technician that he had never heard of this problem before and they gave me a new one.  Now a few weeks later the new one is doing the same thing.  Anyone else having this problem?

    Try going to Settings > General > Siri and turn off Siri.  Now try to activate Siri with the home button and you should get the voice command system (similar to Siri).  Does it screech?
    Next, go back and turn on Siri.  Then back up your iPad to iTunes or iCloud.
    Go to Settings > General > Reset > Reset All Settings.  Does Siri still screech?
    Lastly, Go to Settings > General > Reset > Erase All Content & Settings.  When the Set up screens show up, choose 'Set up as new..." and skip everything you want to.  Test Siri again and see if it screeches.
    If it does not screech when set up as new, then you may have something corrupt going on in your backup.  You can restore form your backup and see if the issue returns.  If it does, then go back and set it up as new again and maually set up your accounts and apps again.
    If the issue continues even when set up as new, go back to the Apple Store.

  • ChaRM scenario for only one productive system

    Hi CHaRM-experts!
    I would like to know whether or not is it possible to use the Change Request Management scenarion for only one productive system?
    It means we have systems and cases where we should apply the emergency correction only in productive system, without any transport from DEV or QAS system.
    Does ChaRM support such case?
    Thank you very much!
    regards
    Thom

    Hi Don,
    thank you very much for your answer.
    No, I do not plan any transport in the productive system.
    I would just make any adminstrative changes without transport.
    Does ChaRM support such scenarios?
    Thank you!
    regards
    Thom

  • Our records indicate that this product has been replaced. Please provide the serial number for your replacement product to find the support and warranty coverage information. For more information, please contact us." how does this possible..???

    I have a horrible time with my new Iphone-4, No SIM card found issues and while i tried to contact customer care with device serial number getting a messgae of "Our records indicate that this product has been replaced. Please provide the serial number for your replacement product to find the support and warranty coverage information. For more information, please contact us."
    What step should i take next.

    Where did you get the phone?
    That phone was replaced by Apple or an AASP and was not returned to Apple as it should have been, or it was stolen from Apple or somewhere in the supply chain.
    You can not get support from Apple for that phone.
    Return it to wherever you got it and get your money back.

  • How does the production system take the benefit from user-exits.

    How does the production system take the benefit from user-exits.

    and it is not the production system that benefits. its the company and the people working with SAP that benefits from the user exits which allow SAP to be altered for the company specific situations.

  • How does the PRODUCTION SYSTEM take the benifit from the USER EXITS?

    how does the PRODUCTION SYSTEM take the benifit from the USER EXITS?
    please explain

    and it is not the production system that benefits. its the company and the people working with SAP that benefits from the user exits which allow SAP to be altered for the company specific situations.

  • HT201250 when restoring a time machine backup to a new computer, does it affect the new operating system on the new computer

    when restoring a time machine backup to a new computer, does it affect the new operating system on the new computer?

    That depends on how you do it.
    By far the best, easiest, most reliable method is to use Setup Assistant when your shiny new Mac first starts up, to transfer your apps, users, data, etc.   That doesn't disturb either the OS or basic Apple apps that came with the new Mac.  See Using Setup Assistant on Mountain Lion or Lion.
    There is a facility to restore an entire system from Time Machine backups, including the version of OSX on the backup, but that's for use when your internal HD has been erased or replaced only.  It's not a good idea to restore the full backup of one Mac to a different one.  Depending on the circumstances, the installer may not allow it.  Even if it does, the Mac may not start up, or may kernel panic, or not work properly.

  • How To Register For a New eFax Account on the Photosmart eStation

    If you ever find yourself unable to log in to your eFax account and you have contacted HP Technical Support and eFax only to find the problem cannot be fixed by either party, there is a way to register for a different account but the only way to do this involves using a Photosmart eStation.  The error you may get will read "Invalid Login" and is only applicable on the Photosmart eStation, HP Envy Series, and the Photosmart 7510 regardless of whether you are trying to create a new account or just access one that already exists, here are the steps to fix that:
    1. Go to www.efax.com and sign in. 
    2. Select "Update Account" and then select the profile tab.
    3. Change the current contact email to a dummy/alternate email (must have a phone number listed on this page before changes will go into effect).
         a) Using the @hpeprint.com email may cause problems.
         b) Log out of eFax account.
    4. Go to the E-station and follow these instructions to be able to register for a new account:
         a) On the top of the E-station, select the 3rd Menu button (3 lines) and go to
         b) Select Settings then
         c) Tools then
         d) Advanced then
         e) Applications and
         f) Manage Applications
         g) next Filter > select All and wait for all the apps to load.
         h) Scroll down to very bottom for Webfax
         i) and then Clear Data in this section
         j) Select the Home button at the top and
         k) Select Efax and register for a new account with a preferred email and zip code
         l) Write down the new phone number and check your email for a new 4-digit PIN
    5. Repeat these steps to clear the Web Fax data and then try to login to efax.com on the printer by selecting
         a) eFax button
         b) Settings
         c) Account and upgrade information
         d) Change
         e) After selecting chance, in this area, login to eFax on the printer with the new number and pin.
    6. The best test to ensure everything is working now is to send yourself an eFax so you can check for incoming and outgoing processes to be just as you expect it to be.
    7. Print the ePrint info page so that the printer's ePrint email address will be associated with the new eFax account.
    And that is the trick on how to get a new eFax account if you are experiencing issues with signing in from the front panel of the printer.  If you do not have access to a Photosmart eStation, then contact HP Cloud Services at 1-855-785-2777 if you live in North America or are an English-speaking customer for assistance with this step.
    Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
    When a solution is found please mark the post that solves your issue.
    Every problem has a solution!

    Here is a picture of the Photosmart eStation:
    Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
    When a solution is found please mark the post that solves your issue.
    Every problem has a solution!

  • When I go to google on firefox and search for a topic, I try to open a website and another website (morsearch, clickkick, etc) will open up instead into a new search engine with the same topic . What is this?

    I go to google. I type in "plants". A lot of sites will pop up in google. I click on a site (does not matter which usually). The site will then start to switch to a new url from (click kick, morsearch, etc) turning into a new search engine with the same topic and more options. I never get to the page I want unless I type the url directly into the address box. It always comes back with a search engine. So far I have found this only happens while starting in a search engine. When I get into the actual page, everything is fine. I am using McAfee for security and it hasn't caught a virus or anything yet. Help please! Thanks!

    Install, update, and run these programs in this order. They are all free for personal use, but some have limited functionality in the "free mode" - but those are features you really don't need to find and remove the problem that you have. <br />'''''(Not all programs detect the same Malware.)'''''
    Malwarebytes' Anti-Malware - [http://www.malwarebytes.org/mbam.php] <br />
    SuperAntispyware - [http://www.superantispyware.com/] <br />
    AdAware - [http://www.lavasoftusa.com/software/adaware/] <br />
    Spybot Search & Destroy - [http://www.safer-networking.org/en/index.html] <br />
    If these don't find it or can't clear it, post in one of these forums for specialized malware removal help: <br />
    [http://www.spywarewarrior.com/index.php] <br />
    [http://forum.aumha.org/] <br />
    [http://www.spywareinfoforum.com/] <br />
    [http://bleepingcomputer.com]

  • My husband has an iPad and I just got one for me.  We both have the same e-mail address.  The message I get when I try to set my new one up is that the Apple ID is already in use.  How do I set up with our shared e-mail account

    My husband has an iPad and I just got one for me.  We both have the same e-mail address.  The message I get when I try to initiate setup is that the Apple ID is already in use.  Any ideas on how to complete the setup of the new iPad since we both share the e-mail account?

    If you selected open a new Apple ID account, go back a step and enter use existing Apple ID.
    You will have to set up a separate iCloud account or your iPads will mirror each other.

Maybe you are looking for