Feeds paper, sometimes repeatedly, in print mode and doesn't print. Copies fine.

My HP 7410, running XP Pro with constant updates, doesn't print but copies fine. It feeds paper, sometimes many sheets, but just pauses briefly with paper in position to print and doesn't print. I thought the problem might depend on the weight of the paper, but it doesn't matter. If the paper is too lightweight, jams a lot because it picks up several sheets at time.

Two things:
Make sure both front and back rollers are clean.
Check the panel that holds the back rollers - make sure it is inserted well. You may remove it, clean it (blow dust) then re-insert.

Similar Messages

  • Lightroom print mode and Color mode grayed out

    Both print mode and color mode selections are grayed out not allowing me to select them. Help

    I see you haven't gotten much input so far from the Mac experts...
    As a Windows user without an Epson printer myself, I can't comment on why you might have color problems under the covers where the software doesn't seem to be following the chosen settings.  However, perhaps I can get you thinking about how to further diagnose the problem...
    The obvious thing I see is that you've chosen "Photoshop Manages Colors" in the main dialog, which implies your intent is to shut off color-management in the printer driver itself.  So to me the graying out of those settings in this case seems to make sense.
    Have you tried a test print using the "Printer Manages Colors" setting?
    Also, to try to test whether color-management isn't being turned off in the printer (regardless of what the grayed-out settings show), do you see any improvement if you use "Photoshop Manages Colors" but choose a standard profile, such as sRGB IEC61966-2.1 for the Printer Profile setting?
    -Noel

  • I am having a painful problem with itunes 10, everytime I go into the itunes store to search for a song, even if I type one letter in it will instantly launch into search mode and doesn't stop, so I'm unable to find

    I am having a painful problem with itunes 10, everytime I go everytime I go into the itunes store to search for a song, even if I type one letter Itunes will instantly launch into search mode and doesn't stop, so because I can never get past putting in the first letter or two, I'm unable to search and download any songs. I am on the latest Imac Intel core i7 Mac OS X, can anybody help?
    Thankyou.
    Beckyg.

    Having this problem too: IT'S REALLY REALLY ANNOYING!!! Anyone have an idea how to sort this?

  • When I print a Word document to a shared printer, print preview looks fine but the printed page has too much blank space at the top and doesn't print the bottom few lines.

    When I print a Word for Mac document to a shared printer (that is connected to my iMac) from my Macbook Pro, print preview looks fine but the printed page has too much blank space at the top and doesn't print the bottom few lines.  I have tried to adjust the margins and the page setup settings but to no avail.  It used to print fine until recently.  Is there a way to fix it so that the printer prints what print preview shows?

    I should add that when I e-mail this document to myself and print it directky from the iMac, it prints fine.

  • IPhone 6 restarts in emergency mode and doesn't recognize my passcode

    My iPhone 6 started having a problem while I was texting, with delayed response and double characters.  I cleared the programs and power down and back up.  The phone wasn't operational when rebooted, it didn't connected to WiFi or cell, and said is was over heated.  I power it down and left it off for 15 minutes, but occurred the same condition upon reboot.  I looked on line and someone suggest a hard reset (holding the sleep and home buttons until the apple logo appears. Now the iPhone 6 will only boot up to emergency mode and doesn't accept my passcode.  I am using iCloud to back up the phone.  How can I correct this condition?

    Sounds like you need to bring the phone to Apple for evaluation.

  • Have new iMac OSx10.8.2, and when I connected my Epson Stylus pro3880, loaded printer drivers, and tried to print, the printer utility opens, then crashes. Any ideas? (it worked fine on my last iMac)

    Have a new imac OSx10.8.2, and when I connected my Epson Stylus pro 3880, loaded print drivers, and tried to print, the printer utility opened and then crashed; happened several times. Any ideas? (it worked fine on my older imac)

    I believe so. the driver version I have is 8.64
    The person gave me the instructions to reset the printing system and I followed it. That's what corrected the printing drop down windows.
    I am also having trouble finding the downloaded icc profiles for the papers I use. I see them in the Color Sync Utility, but not in the drop down window for Color Management. There is a thread on this forum relating to that, but I don't understand how to "copy" the profiles and put them elsewhere.

  • What's the difference between HP Wireless G Print Server and HP Wireless Printing Upgrade Kit?

    Hello!!
    What’s the difference between HP Wireless G Print Server and HP Wireless Printing Upgrade Kit?
    I found two things as follows.
    1. MAC support
    2. USB dongle
    Is there anything else?

    Now I’m clear!!
    But there are descriptions for each on your home page over view tab. Due to this forum restriction; I cannot put the URL here.
    They say for each as follows.
    HP Wireless Printing Upgrade Kit --- Retain full all-in-one wireless functionality: print, fax from your PC, scan, and access photo memory cards access and PC status
    HP Wireless G Print Server --- Get the same functionality with your all-in-one: printing, scanning, photo memory card access, PC faxing, and printer statusSo I got confusion, that’s why I did not get the difference for them.
    And I found wrong description on your HP support document page. I recommend that you correct it, because it put consumer into confusion and break to buy this product.
    The title is “HP Wireless Printing Upgrade Kit - Setting up the HP Printer with the HP Wireless Printing Upgrade Kit in Windows .”
    The wrong description is “NOTE:  You must turn on the computer with the computer adapter in order to print to the wireless product” at last line of “Step two: Configure other computers to use the printer. “
    You can erase this line!!

  • My macbook pro automatically goes into safe mode and doesn't start. I use mavericks.  what to do? ?

    my macbook pro automatically goes into safe mode and doesn't start. I use mavericks. What to do??

    Can you boot into your Recovery partition (hold down the command and R keys whilst booting)?
    Call back - you'll be able to connect to this forum from Safari whilst in Recovery.
    Clinton

  • Printing envelope and cont. to print from phototray set made main tray in properties?????

    envelope wizard keeps printing from phototray. have changed setting to main tray in properties and cont. phototray???

    Unfortunately any image file sent to ePrint will automatically be printed out on photo paper with printers that have a seperate photo tray.
    Depending on how you are ePrinting, you do have a few options though. If you are printing from a Apple or Android device, their is an app that will allow you to choose the paper size and type when printing.
    For Apple products, you want the HP ePrint app.
    For Android based devices, you want the HP ePrint Home & Biz app.
    If you are printing from a computer, you can download the ePrint Mobile Driver and that will also give you those options.
    Reply back with how you are printing and let me know if you need any help getting this set up.
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • I am not able to print on my existing printer. Print mode takes me to "Print to File" . It does not show me my laser printer.

    I am not able to print articles or E-mail on my existing laser printer in print mode. It takes me to "Print to File" . It does not show me my laser printer.

    hi,
    what's SAP version you are using ?
    I am using SAP R/3 4.7 ext 2.00 and have Basis patch level 52 (minimumly), I am  able to use SAP Front end printing.
    You can use Access Method : G : Frontend print with control technologie
    and also Host Printer : __DEFAULT
    best regards,
    ardhian

  • PO print OUT And material Document Print Out is coming In English

    HI all.
    I have Created Vendor In ZH(chinese Language,)and in material master I have maintained description in Chinese language.
    I'M taking PO and material Documents print outs  in Chinese Server log-in.
    even Though Im taking Print outs in Chinese Log-In server, IM getting Print outs in English Language only not In chines language..
    At the Time Of PO creation the Communication Language is ZH(Chines)..
    I have read some related post even 89899..
    But I have not find solution
    plz help me.
    thanks and regards
    ramesh reddy.'

    Check SAP Note 894444 - Tool for server-based printing on Windows (SAPSprint) for your requirement,
      Installation
    Before you install SAPSprint, delete SAPLPD manually. To do this, you normally need to completely delete the installation directory only. If you installed SAPLPD as a service using the srvany tool, you can remove the service by calling 'Instsrv SAPLPD remove'.
    You can download SAPSprint as a self-extracting executable file from SAP Service Marketplace:
    1. Entry by Application Group (on the left)
    2. SAP Frontend Components (on the right)
    3. SAPSPRINT (on the right)
    4. SAPSPRINT <Release> (on the right)
    5. SAPSPRINT <Release> (on the right)
    6. Win32 (on the right)
    Start the program. After you enter the installation path, the system prompts you to enter the TCP/IP port.
    Normally, the default setting of 515 is suitable for the port. You should only change this setting if the Windows TCP/IP print service is also running on the computer. The SAPSprint Windows service starts as soon as the installation is over.
    We recommend that you set up the following options for the service in the Windows Service Control Manager:
    The service should run under a domain user that has the relevant authorizations for the required printers. After the installation, the service runs under "Local system account". This can access locally-defined printers only. You can set the user in the Windows Service Control Manager, in the options of the SAPSprint service.
    If you want to delete SAPSprint, you can do so using the normal Windows uninstall tool.
    We recommend that you install the SAPSprint service on a separate computer and not together with a SAP system, especially if you use a large number of printers. All printers that SAPSprint uses must be installed on the SAPSprint computer. This applies particularly to released printers from other computers. These should be installed as a queue on the SAPSprint server.
    Also note further settings in accordance with Note 1069483.
    Settings
    You can display the call parameters available for SAPSprint by calling 'sapsprint -?' on the command line. The most important parameters are those that set options, especially log options for troubleshooting.
    You can set the log level to 5 by specifying 'sapsprint -oi LogLevel 5'. Immediately after installation, no log level is set up, which means that no log file is created. By setting the log level to 1, 5, or 9, you can ensure that more information is available in the directory that you specified during the installation. A file called sapsprint.dbg and a print job specific file with a variable name are generated. The second file is deleted after successful printing. It is only retained if the printout is recognized as incorrect. If you set the option 'sapsprint -oi KeepFile 1', then both this file and the print file are retained. This is primarily intended for troubleshooting by SAP Support.
    All options are case-sensitive. You can display the most important SAPSprint options by calling 'sapsprint -?'. All possible options are described in Note 85469. Normally, the options described there are not necessary - you should use them only in exceptional circumstances.

  • My phone is in recovery mode and doesn't turn on, what do I do?

    I tried to back it up to my computer because I didn't have anymore iCloud storage space.  It was supposed to upgrade but then went on upgrade mode and only thing I can do to get it off this mode is to connect it to iTunes and restore the phone to its original settings.  I do not want to do that.  I want my phone to turn on and it's ok if I'm not upgraded to ios7

    Well, do as the diagram indicates:  Connect your iPhone to your computer and restore via iTunes.

  • Printer says "sending data..." and doesn't print (photosmart c440 & macbook pro snow leopard)

    Hi, my photosmart C440 printer suddenly stopped working and wont print. The message says "Sending data..." forever but never prints. The printer is on but doesn't respond to what my computer says. I have a macbook pro snow leopard OS. This has never happened before, I didn't make any changes to the system. When the problem first appeared, I reinstalled the driver and was able to print once, then it stopped working. Then I installed snow leopard and it stil doesn't work.
    Thank you!
    This question was solved.
    View Solution.

    Let's reset the printing system:
    - Sys Prefs, Print & Fax
    - Right (control) click in the rectangle listing your printers and select Reset Printing System.
    WARNING - this will delete ALL of your printers!
    - Select the plus sign to re-add it. Look for the printer, select it and wait until the "Add" button becomes available. Click it.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Hp photosmart C7280 says "stopped" in print queue and won't print!

    I just bought an hp photosmart C7280 today. It was a pretty simple setup with the actual printer and network and all. i download the updated driver from the hp website and all seemed kosher there too. now i click "print" and on the print queue page it says "stopped" and won't print!
    ahhh please help? is this a good printer with macs anyways? it seemed kinda loud during the setup...

    I too have gone through most of the problems described here but have finally been able to get the c7280 working properly, yet I'm still not very happy with the solution.
    For connectivity reasons, I wanted to connect the aio to my network via ethernet cable directly to my router. While my computers will access the network wirelessly, I wanted the printer to have a solid connection. Unfortunately, I was never (and still can't) get it to work properly using this connection. What finally did work was using the wireless connection in the printer to connect to the network.
    Why this would work wirelessly and not while directly connected is something no one has been able to explain. I still have the printer right next to my wireless router to interference doesn't seem to be a problem and it seems fast enough, but the fact that I can't get it working properly with a "less technically challenged" method, really bothers me. What if I didn't have a wireless network? While wireless is great, if there was an easy solution to have all my desktops connected via ethernet, I'd prefer it (easy being not having a bunch a cables around and perhaps a pre-wired network in my home!)
    Anyway, I hope everyone who has this machine gets the problem worked out. Unfortunately, knowing what I know now, I don't think I would buy this one again unless the software was rock solid. Physically the unit works well, but is a little loud I admit and went through my black cartridge pretty fast even though I used in saving settings such as fast draft, etc.
    Just as a side note, the HP support guy in Canada was fairly annoying. When we still couldn't get it working properly via ethernet, he insisted it must be a problem with Apple or a conflict with a program I have installed, etc,etc. and told me that every one of his customers that has Leopard also has this unit working 100% properly. I politely told him he needs to add me as his first failure!
    OK, enough rant. Try connecting wirelessly and see if that works. I would uninstall the current printers as suggested, but also clear out the printer cache. Do this by right clicking in the add a printer box area and choose reset printing system. If all else fails and you upgraded to Leopard from Tiger, then......gulp...... uninstall Leopard and revert back to Tiger. Under Tiger, both my macs worked perfectly connected via ethernet printer connection. Good luck.

  • In Sapscript, print page 1 on printer 1 and page on printer 2 -(tray setup)

    Hello Experts,
    We have a requirement in our cheque printing program wherein we need to print on different printers.
    I think this has something to do with trays in sapscript. Because for page 1, we need to print
    on a pre-printed form and for page 2 onwards we just need to print it on an ordinary papaer.
    Can you please tell me how I can achieve this and how do we customize it in sapscript?
    Hope you can help me guys. Thank you and take care!

    The resource names are already set by SAP. TRY01, TRY02, TRY03 which correspond to the same trays in the Printer setup (txn: SPAD, Tray Info window). I suspect there are more possible values (some printers have more than 3 trays) but I've never seen them documented.
    Note, your basis team needs to make sure the tray settings are in SPAD and the print drivers are set correctly.

Maybe you are looking for

  • Reinstall of OS: iTunes Library on external drive not recognized

    I've always had my iTunes library on my external drive. Now that I reinstalled my OS iTunes will not open the library. I've navigated to the correct library using the advanced preferences but that's not doing it. I've tried discarding the existing li

  • Itunes, add and remove media files? Playlist and smart playlist

    My problem is i have synced all my music into itunes and now i do not know how to delete them. I only want media that i need in itunes. What i did was sync all my media files into itunes where this has created a mess for me. I have duplicate media fi

  • Servlets in Tomcat

    I am trying to run servlets using Tomcat. I have them working and displaying but as soon as I make a change to a servelt and re-compile and refresh the browser the change do not take effect. I have to shutdown and restart tocat. Surely this can't be

  • New Store Quantity Calculation

    hai.. i have been assigned an object. I need to use the function exit WRPL0001 for the transaction wrp1 to calculate the total consumption for the given fiscal year. Inside the user exit using the article number and site, the corresponding reference

  • No profit segment - Summarization FI

    Hi everybody! I'm trying to apply the "Solution (Note 36353)" to avoid the error message F5 727 (Maximum number of items in FI reached) but as the note says if I apply it I will loose some information from certain fields of the FI document, in this c