Fennec won't launch with Weave installed without toggling "safe-mode"

I'm having a strange problem with fennec and weave on my Nokia n810. Once i have run fennec with weave installed (and waited for the sync to finish), I can no longer launch fennec. Launching fennec from xterm just returns me to the command prompt.
If I then launch fennec in safe-mode, close, then start in "normal" mode, everything works. But I have to launch fennec in safe-mode once before it will run again with weave installed. This is definitely repeatable.
I've done clean installs of fennec, I've completely deleted my profile, but the problem persists.
Hoping somebody here might have some ideas...
== Extensions installed: ==
weave

more details on this:
Nokia-N810-43-7:/root$ fennec
fennec[1527]: GLIB DEBUG ConIc - con_ic_connection_send_event(0x40e03040, ce037a14-b509-45c7-bbf7-7b67579da12e, WLAN_INFRA, 0)
Safe Mode:
Nokia-N810-43-7:/root$ fennec -safe-mode
fennec[1543]: GLIB DEBUG ConIc - con_ic_connection_send_event(0x40d5bb80, ce037a14-b509-45c7-bbf7-7b67579da12e, WLAN_INFRA, 0)
After a launch in safe mode:
Nokia-N810-43-7:/root$ fennec
fennec[1567]: GLIB DEBUG ConIc - con_ic_connection_send_event(0x40d5bb80, ce037a14-b509-45c7-bbf7-7b67579da12e, WLAN_INFRA, 0)
fennec[1567]: GLIB DEBUG ConIc - con_ic_connection_send_event(0x40d63b80, ce037a14-b509-45c7-bbf7-7b67579da12e, WLAN_INFRA, 0)

Similar Messages

TS3899 iPad 2 mail won't launch with newly installed iOS 8.3. Help please.

I Upgraded to iOS 8.3 and now mail won't start on my iPad 2

I Am having similar issues with both IPad Air 2 and IPhone 6 since 8.3 upgrade
i also have a hotmail.co.uk email address
i also have issues with outlook iOS app version 1.1.4 since this update
prior to update I would get mails to both Apple Mail app and also Outlook App and could manage them in either and the files would delete or move in the opposite app.
since 8.3 I am definitely having sync issues with what I want to do.
it is either a hotmail issue or an 8.3 issue however the fact my gmail app and apple mail app still sync correctly I am leaning toward it being a Microsoft mail issue but I could be wrong.
I Have uninstalled and reinstalled outlook app and have deleted hotmail address and reinstalled but made no difference.
the only thing left would be to reset iPad and iPhone but hoping I won't have to do that.

Quark 7.5 won't launch with OSX Mavericks 10.9.1

QuarkXPress 7.5 won't launch with OSX Mavericks 10.9.1 I keep getting the window saying "QarkXPress quit unexpectedly" (see image below) and when I click on reopen, it does the same everytime. HELP!

Hi DCG,
hope oyu had a great christmas.
I posted the post you reference on June 11, 2013.
Since then a lot of things have happened. We released 9.5.4 several weeks ago, which seems to work fine for everybody under Mavericks.
We also posted an update for version 10 that makes it Mavericks compatible and afterwards released an update that fixes most issues reported.
So please try 10.0.2 or 9.5.4 on Mavericks, they should both work fine: http://www.quark.com/de/Support/Downloads/Search_Results.aspx?pid=1&oid=2&ftid=2
Thanks
Matthias

OS Mavericks won't boot without using safe mode

My macbook pro won't boot up when its not in safe mode. It gets to the apple screen and then freezes but I can move the mouse around. Safari also won't open even when it is booted in safe mode.

If you don't already have a current backup, back up all data before doing anything else. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve your problem. The backup is necessary on general principle, not because of anything in this comment. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
Below are instructions to run a UNIX shell script, a type of program. All it does is to gather information about the state of your computer. That information goes nowhere unless you choose to share it on this page. However, you should be cautious about running a program at the suggestion of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them.
Here's a summary of what you need to do: Copy a line of text from this web page into the window of another application. Wait about a minute. Then paste some other text, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only run the test in safe mode, proceed anyway.
If you have more than one user, and the one affected by the problem is not an administrator, then please run the script twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, just run the script as the affected user. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in your browser, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
clear; shopt -s extglob; Fb='%s\n\t(%s)\n'; Fm='\n%s:\n\n%s\n'; Fs='\n%s: %s\n'; Fu='User %s%%\t\tSystem %s%%'; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ "$a" -eq 0 ]]; }; R () { o=; [[ "$r" -eq 0 ]]; }; Pm () { [[ "$o" ]] && o=$(sed 's/^ */ /' <<< "$o") && printf "$Fm" "$1" "$o"; }; Pc () { o=$(egrep -v '^[[:blank:]]*($|#)' "$2"); Pm "$1"; }; Pp () { o=$($PB "$2" | awk -F'= ' \/$3'/{print $2}'); Pm "$1"; }; Ps () { o="${o##+( )}"; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; id | grep -qw '80(admin)'; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; system_profiler SPSoftwareDataType | sed '8!d;s/^ *//'; o=$(system_profiler SPDiagnosticsDataType | sed '5,6!d'); [[ "$o" =~ Pass ]] || Pm "POST"; o=$(pmset -g therm | sed 's/^.*CP/CP/'); grep -q 'No th' <<< "$o" && o=; Pm "Thermal conditions"; o=$(pmset -g sysload | grep -v :); grep -q '= [^GO]' <<< "$o" || o=; Pm "System load advisory"; o=$(nvram boot-args | awk '{$1=""; print}'); Ps "boot-args"; o=$(ls /L*/L*/Dia*/*.panic | wc -l); Ps "Panics"; o=$(ls /L*/L*/Dia*/*.c* | tail); Pm "System crash logs"; o=$(ls L*/L*/Dia* | tail); Pm "User crash logs"; o=$(syslog -F bsd -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|n Cause: -|NVDA\(|pagin|SATA W|timed? ?o' | tail -n25 | awk '/:/{$4=""; $5=""; print}'); Pm "Kernel messages"; o=$(df -m / | awk 'NR==2 {print $4}'); [[ $o -lt 5120 ]] && Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/Pageo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( $(sar -u 1 10 | sed '$!d') ); [[ ${s[4]} -lt 90 ]] && o=$(printf "$Fu" ${s[1]} ${s[3]}) || o=; Pm "Total CPU usage" && o=$(ps acrx -o comm,ruid,%cpu | sed '2!d'); Pm "Max %CPU by process (name, UID, %)"; o=$(kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1); Pm "Loaded extrinsic kernel extensions"; R && o=$(sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|post[fg]|x)/{print $3}'); Pm "Loaded extrinsic daemons"; o=$(launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'); Pm "Loaded extrinsic user agents"; for d in {/,}L*/{La,Priv,Sta}*; do o=$(ls -A "$d" | egrep -v '^(\.DS_Store$|com\.apple\.)'); Pm "$d"; done; o=$(find -L /S*/L*/E* {/,}L*/{A*d,Compon,Ex,In,Keyb,Mail,P*P,Qu,Scripti,Servi,Spo}* -type d -name Contents -prune | while read d; do ID=$($PB\ :CFBundleIdentifier "$d/Info.plist") || ID="No bundle ID"; egrep -qv "^com\.apple\.[^x]|Accusys|ArcMSR|ATTO|HDPro|HighPoint|driver\.stex|hp-fax|\.hpio|JMicron|microsoft\.MDI|print|SoftRAID" <<< $ID && printf "$Fb" "${d%/Contents}" "$ID"; done); Pm "Extrinsic loadable bundles"; o=$(find /u*/{,*/}lib -type f -exec sh -c 'file -b "$1" | grep -qw shared && ! codesign -v "$1"' {} {} \; -print); Pm "Unsigned shared libraries"; o=$(launchctl getenv DYLD_INSERT_LIBRARIES); Pm "Inserted libraries"; o=$(find {,/u*/lo*}/e*/periodic -type f -mtime -10d); Pm "Modified periodic scripts"; o=$(scutil --proxy | grep Prox); Pm "Proxies"; o=$(scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'); Ps "DNS"; R && o=$(sudo profiles -P | grep :); Pm "Profiles"; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; Pc "hosts" <(sed '1,10d' /etc/hosts); Pc "User launchd" ~/.launchd; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=$(sudo defaults read com.apple.loginwindow LoginHook); Pm "Login hook"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed 's/\..*$//;s/-[1-9]$//'; o=$(find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ | wc -l); Ps "Restricted user files"; cd; o=$(system_profiler SPFontsDataType | egrep "Valid: N|Duplicate: Y" | wc -l); Ps "Font problems"; o=$(find L*/{Con,Pref}* -type f ! -size 0 -name *.plist ! -exec sh -c 'plutil -s "$1" >&-' {} {} \; -print); Pm "Bad plists"; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign ($) or a percent sign (%). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the script will run anyway, but it will produce less information. In most cases, the difference is not important, so don't worry about it.
If you're not logged in as an administrator, you won't be prompted for your password. The script will still run. It just won't do anything that requires administrator rights.
The script may take up to a few minutes to run, depending on how many files you have and the speed of the computer. There is no indication of progress until it's done. Wait for the line "[Process completed]" to appear in the Terminal window.
You can then quit Terminal. The output of the script will have been copied to the Clipboard automatically. All you have to do is paste into a reply to this message by pressing command-V again. Please don't copy anything from the Terminal window.
If any personal information, such as your name or email address, appears in the output, anonymize it before posting. Usually that won't be necessary.
When you post the output, you might see the message, "You have included content in your post that is not permitted." That's because the forum software falsely identifies something in the post as a violation of the terms of use. If that happens, please post the output on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the output of the script. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of Apple Support Communities ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Hey, I just installed ML on my OCZ Octane SSD, everything went ok, However, it got stuck while rebooting and now I can only see flashing question mark icon and ML won't boot at all. Only in safe mode...

Hey, I just installed ML on my OCZ Octane SSD, everything went ok, However, it got stuck while rebooting and now I can only see flashing question mark icon and ML won't boot at all. Only in safe mode...

It looks like ocz is aware of the issue and trying to address it via firmware:
http://www.ocztechnologyforum.com/forum/showthread.php?103700-Mountain-Lion-and- OCZ-Octane-Petrol-and-Octane-S2-SSD-s
It's a shame because apple is clearly the party that changed something.

HELP! MacBook Pro 17" Won't Boot-Grey Screen-Errors During Verbose Safe Mode Boot

Booting regularly it hangs on the grey screen, if it does go into desktop, it freezes and won't do anything.
I did disk check and repair even though it found no errors, and did verify and fix permissions since it showed a LOT of permission errors. Still won't boot into desktop though.
Ran safe mode verbose and got the following disk0s2 I/O Errors-What does this mean??? Hard drive problem?
I have reload OS X 3 times in the past few weeks because of freezing issues in Mavericks and stuck with Mountain Lion and it was running fine until I went to boot up this morning after a clean shut down and won't boot up ever since.
http://i43.photobucket.com/albums/e389/RIPNHL2005/photo_zpsb0d8d5cf.jpg
http://s43.photobucket.com/user/RIPNHL2005/media/photo_zpsb0d8d5cf.jpg.html
Please help.....This is my main laptop and job search tool.....
Thanks!!!

Is this the right drive config for the macbook pro?
Is Western Digital no good? Best Buy has them in stock.....
HGST
500GB Travelstar™ Z5K500 Hard Disk Drive
2.5-Inch | SATA 3.0Gb/s | 5400RPM | 8MB Cache
High-performance, high-capacity mobile storage for notebook PCs and other applications
Low Profile - 7mm thickness for slim designs
High Capacity - Up to 500GB
Quiet Operation - Enjoy a richer audio-listening experience
Travelstar Z5K500 is the second generation 7mm, 5400 RPM 2.5-inch hard drive from HGST, with capacities ranging from 250GB to 500GB, and the second generation Advanced Format drive. Advanced Format increases the physical sector size on HDDs from 512 bytes to 4,096 (4K) bytes, which improves drive capacities and error correction capabilities. The 500GB per platter, one-disk models are designed as a direct replacement for standard 9.5mm HDDs, for use in notebook PCs, external storage and gaming consoles, as well as new, thinner and more robust device designs. The Z5K500 carries the EcoTrac classification due to its low-power consumption and eco-friendly, halogen-free production. Travelstar Z5K500 delivers the right balance of capacity, power-management and design flexibility to meet the needs of mobile applications.

LE 9 won't launch with 10.7.2 after installing on 2nd iMac

I installed the LE 9 Upgrade onto a 2nd iMac running 10.7.2 but it won't launch.
I get an error message saying something along the lines of "This version of Logic Express (9) will not run on this version of OX S"
OS X 10.7.2 is installed.
I tried launching it unconnected from network but still no luck.
The EULA allows for installtion on up to 2 computers owned by me - which both are.

After updating to 9.1.5 it now works.
Did so before seeing the above suggestion but forgot to post that the problem was fixed.
Thx!

Finder won't launch after re-install 7.1

I reinstalled QT 7.1 after having problems with 7.2. I was getting only audio and no video. After the reinstall I rebooted and now the finder won't launch so I can't see my hard drive or any icons on my desktop. And oddly enough the only app that will open is safari and quicktime now works!
What have I done and any clue on what just happened?

There is no "re-install" of older software versions allowed in OS X.
The only safe way to revert to previous versions is by Archive and Install using the Tiger DVD.

Finder won't launch after re-install quicktime 7.1

I reinstalled quicktime 7.1 after having problems with 7.2. I was getting only audio and no video. After the reinstall I rebooted and now the finder won't launch so I can't see my hard drive or any icons on my desktop. And oddly enough the only app that will open is safari and quicktime now works!
What have I done and any clue on what just happened?

There is no "re-install" of older software versions allowed in OS X.
The only safe way to revert to previous versions is by Archive and Install using the Tiger DVD.

Reader 10 X won't launch with changed thumbnail icon

Hey guys,
I'm have an issue with getting Acrobat Reader to launch from a 3rd party program. Basically, in this program, you click 'view' and the pdf opens in Reader. However, on one of my computers, this isn't working. It looks like my computer's PDF default was set to launch in Windows Media Center, so I changed the default to launch with Adobe Reader. Now, in Windows Explorer, double clicking on any PDF file will launch Reader, but the icon is weird (see below) and the 3rd party program does nothing, as if it's confused as to what program to use.
------->
See how the Adobe logo doesn't take up the whole icon place? Why is the logo on a white sheet of paper here? I suspect this is causing issues with the 3rd party program.
I have uninstalled Reader 10 and even reinstalled with 9... same issue.
Running Win7 32-bit.
ANY IDEAS?
Thank you!
============ UPDATE =============
I just downloaded Adobe Acrobat X Pro. I changed the PDF default program to X Pro and that's normal now. Normal icon and 3rd party program launches Acrobat. But when I switch the default back to the regular Reader, the icon changes to the image above and my program won't launch Reader. Any ideas other than purchasing Pro? What gives?

The only other idea I have to make sure Reader is uninstalled completely; use the Acrobat Cleaner Tool from http://labs.adobe.com/downloads/acrobatcleaner.html
Note: this tool will also uninstall Acrobat if it's installed on that computer.

Address Book Won't Launch after re-installing system.

Hope someone has a suggestion here. I just installed a new HD and made a nice clean install of system, starting with original that came with my 1st edition G5 Tower and then upgraded to 10.3, then to 10.4.11 (which is where I stop), performing the Apple Software updates along the way. Everything seems to be fine. Boots extremely fast, just like when it was a baby.
Everything except Address Book. I had been importing e-mails, etc. from my 2nd HD so that I could erase it and went to import from my old Address Book and it won't launch. Does the little animation in the Dock, but immediately quits. If I try to open it through Mail, it immediately kills the Mail application.
I really don't want to have to go through the lengthy installation process again. Does anone have any thoughts as to what might be causing this? Even the version of Address Book on my 2nd HD is doing the same thing.
Any help would be appreciated.
Jim C.

Ok. For those who are interested, I did a search and was able to find some things to look for. Bottom line is that it is now fixed. For some reason, the required info was not contained within the new system's Application Support directory. In comparing the same directory on both the new system and the one on my 2nd HD, I discovered that there was only one thing in the new directory, while the directory of the other system had many things (including Address Book and DVD Player).
I hadn't yet launched DVD Player since installing, when I did, I got an error indicating that there was an error starting DVD Player. I copied the directory from the 2nd system into the Application Support on the new system and it then launched instantly.
I'm not sure why these things didn't get placed in Application Support under normal installation, but that is what the problem was.
Jim C.

Please help lightroom 5 won't launch with my mac 10.6.8 what

ANY Suggestions It won't launch it say's I need 10.7 however, my other programs are working fine with 10.6.8

Thank you. It would have been lovely if they let us know (Important Notice that the New LR5 is compatible only with MAC LION 10.7 and newer Mac versions of operating systems and older, not previous Mac operating systems versions) on the main page before purchasing LR5. I've never had a LR product that didn't work with the old operating system, and I've owned all of them. I think I just trusted Adobe would continue on with the same process . So basically, we'd have to upgrade our operating system and risk the change of now having a situation with all of our current programs that work perfectly with LR5.
Is it possible that Adobe could make sure that they inform trusting customers like us, similar to when trying to market their new products campaigns, they tell us how fabulous the upcoming product are in a variety of ways.... luring us in... You know most of us are Artists.
Just make sure you make it known other than looking at the tech spec page... say like on the page where the shopping cart option is? Epson's printer wouldn't calibrate with the Adobe PS4 a few years ago. It took us months to figure out that, it had nothing to do with our calibration process. Finally....after speaking to Epson, they walked us through varies steps etc... hundreds of dollars later, we were able to get a good print, it turns out the Adobe 4 software was not compatible at that time with the new Epson software. So here we go again...
Be good to us Adobe...this was a bit out of your norm. Thanks

CC Applications PS, etc Won't launch in new install of ML on Imac Platform Config Error 213:5

CC Applications PS, Illustrator, Adobe Acrobat Pro will not launch in newly installed Mountain Lion OS on Imac Platform. Attempts to launch and run CC applications results in Configuration Error: 213:5. Further, On board PS and Lightroom applications fail to Launch. CS5.1 install CD (DVD) ejects and will not install. The installed CS5.1 Photoshop failed. Attempted downloads. No luck still could not launch. Attempted to re-install from Adobe installation Disc ...Disc is ejected after 3 or 4 minutes.
Desperate ...business income is affected negatively now for 5 days due to disruption to workflow in which Phot0shop...used for over 21 years... has been key... ...need help fast!
Message was edited by: truthspeaks

Thank You Mylenium..I will see what is involved in re-install.
Have noted that the volumes are sporadically re-organized under System Finder window after using a file sometimes.
Fille Permissions are often not correct and change without authorization both in systems files and within indvidual applications' children files. I will continue to pursue this vein...
but doesn't a re-install use existent permissions?
I am in way over my head here and know it!...

Itunes upgraded but won't launch with Windows 7

Hi
I upgraded to the most recent version of iTunes 2 days ago (5 April 2010) and now iTunes simply won't launch at all. I have tried some of the remedies in the posts and have even tried a complete reinstall but iTunes still will ot launch.
Does anyone have any suggestions? Thanks in advance

I had the same problem: after updating to iTunes 9.1 (no errors) I just couldn't launch it. In Task Manager I saw that the iTunes process was running but it never really opened.
After nights of frustration of scanning the net for solutions I finally managed to get iTunes to run again.
1) Firstly I deleted the new iTunes 9.1 and all programmes associated with it according to the directions given here: http://support.apple.com/kb/ht1923
It also mentions you should remove the Bonjour service but I could never make that work (no privileges or something like that).
2) After that I reinstalled a previous version of iTunes. In this case 9.0.3.15. I got the download here: http://www.oldapps.com/itunes.php
3) Then I disabled the Bonjour service with the MSCONFIG method mentioned at http://support.apple.com/kb/HT2292?viewlocale=en_US
There they state that you should check which service clashes with Windows by trying to disable one service at a time. I found out pretty quickly that it was just the Bonjour service that caused the problems. All other services could run normally.
After the reboot iTunes finally started up again and I was able to restore my library.
Only thing is that I can not use the Remote App on my iPod Touch. That apparently required the use of Bonjour.
I hope this method helps for some of you!
Cheers,
Bart

ITunes won't launch with Leopard

Hi!
I recently purchashed and installed Leopard on my MacBook, and ever since the OS upgrade I cannot launch iTunes. At first I kept getting an annoying error message (8791) with an older version of iTunes (v7.4.2). I asked for help here in the discussions forum, and was advised according to this thread: http://discussions.apple.com/thread.jspa?threadID=1207611&tstart=0 - which unfortunately left me at a dead end. Then I figured an updated version might do the trick, but after installing v7.5 iTunes still will not launch - with the updated version I don't even get an error message - it just ignores the launch command all together...
Anyone - please help!

I am having the same problem and have followed the same advice with the same results. In addition my finder is missing the searchlight field and reboots every time I try to open finder preferences. I also can't open photoshop. I get the message "Could not initialize Photoshop because there is not enough memory (RAM). I'm running a macbook pro. I don't know if this additional info helps but I am desperate.

Fennec won't launch with Weave installed without toggling "safe-mode"

Similar Messages

Maybe you are looking for