Few data missing from CTX file, need source for CTX file

Hi Experts,
We are using ACH-CTX via Payment Medium Workbench (PMW) and not Via RFFOUS_T program.
The CTX file is generating and now the issue here is few data is missing for some ADDENDA records. But for some ADDENDA lines the data is perfect. Could anyone help me out where exactly the mapping is done for generating CTX File and where the data is coming for this CTX file. As per technical consultant the Event 30- FM: FI_PAYMEDIUM_ACH_30 is appending the ADDENDA record. But where exactly the values are coming from for these FM or for the CTX File. Please revert ASAP.
Thanks,
Venkadesh

Similar Messages

While Browsing SSAS 2005 Cube Getting Error " The following system error occurred from a call to GetOverlappedResult for Physical file: Logical file: '' : Insufficient system resources exist to complete the requested service."

Hi Guys,
When I try to Brows Cube (SSAS 2005), I get below error (Sometimes):
TITLE: Microsoft SQL Server 2005 Analysis Services
Server: The operation has been cancelled.
The following system error occurred from a call to GetOverlappedResult for Physical file: '\\?\F:\Program Files\Microsoft SQL Server\MSSQL.2\OLAP\Data\XXX_2012.0.db\XXX DC.0.cub\FACT_XXX.0.det\PARTITION_2013Q31.0.prt\674.fact.data', Logical file: '' : Insufficient
system resources exist to complete the requested service. .
The following system error occurred from a call to GetOverlappedResult for Physical file: '\\?\F:\Program Files\Microsoft SQL Server\MSSQL.2\OLAP\Data\XXX_2012.0.db\XXX DC.0.cub\FACT_XXX.0.det\PARTITION_2013Q23.0.prt\385.fact.data', Logical file: '' : Insufficient
system resources exist to complete the requested service. .
BUTTONS:
OK
and I think due to above Error, Index on a Particular Attribute (EMP_ID) of a DIMENSION DIM_EMP is getting dropped from FEW of the Partitions (Folders) and started getting new error:
TITLE: Microsoft SQL Server 2005 Analysis Services
File system error: The following error occurred while opening the file '\\?\F:\Program Files\Microsoft SQL Server\MSSQL.2\OLAP\Data\XXX_2012.0.db\XXX DC.0.cub\FACT_XXX.0.det\PARTITION_2013Q31.0.prt\688.DIM_EMO.EMP_ID.fact.map'.
BUTTONS:
OK
I followed the above path and did not find file 688.DIM_EMO.EMP_ID.fact.map in folder PARTITION_2013Q31.0.prt. Once I rebuild the Index (ProcessIndex) for this partition, I am able to See file 688.DIM_EMO.EMP_ID.fact.map.
But again when next time I get error "Insufficient system resources exist to complete the requested service", Then 688.DIM_EMO.EMP_ID.fact.map will be dropped and will not be available in folder PARTITION_2013Q31.0.prt.
Anyone had similar issue. Could you please share your experience and resolution if any.
Thanks Shiven:) If Answer is Helpful, Please Vote

Hi Shiven,
In your scenario, the issue occur at sometimes, right? Base on my research, the issue can be caused by that calculation estimate exceeded available memory. Possibly due to possible number of dimension members and sizes of keys. And 32bit environment didn’t
allow for any expansion to the SSAS memory space.
To avoid this issue, please try to use userva to fine tune the 3GB setting down to 2900 since /3GB is the likely
cause (has been for most other customers who encountered the same problem before). The KB Articles below discuss that setting in detail.
How to use the /userva switch with the /3GB switch to tune the User-mode space to a value between 2 GB and 3 GB
Regards,
Charlie Liao
TechNet Community Support

Have a melody recorder on guitar (AIFF audio file) need to make midi file.

Have a melody recorder on guitar (AIFF audio file) need to make midi file.
so i can change the guitar melody into a synth melody.
any input?
thanks, technoreid

You cannot make midi from audio with GB. You'd need a sampler.

Is there is any way to find the data transfer from client to Configuration Manager for health monitoring and hardware Inventory

Hi
Can Configuration Manager provide a way to find the data transfer from client to Configuration Manager for health monitoring and hardware Inventory. How can I know what amount of data is consumed during that process

Place archive_reports.sms in %systemroot%\ccm\inventory\temp\ for both 64-bit and 32-bit computers.
There are two situations where you can use this depending on the type of client:
1. To keep inventory reports on a client (that is not an MP), create the following file:
%systemroot%\ccm\inventory\temp\archive_reports.sms
2. To keep inventory reports on a MP (that is also a client), create the following file:
<x>:\sms_ccm\inventory\temp\archive_reports.sms
The XML file will be saved in the inventory\temp folder.
More information on the above here: http://blogs.technet.com/b/configurationmgr/archive/2012/09/17/controlling-configuration-manager-2012-using-hidden-files.aspx

Hi iam saif from iraq i need imei for iphone 5

Hi apple iam saif from iraq i need imei for iphone 5

That is found by: Settings > General > About > IMEI

Ld: file was built for unsupported file format...for architecture armv7

hi:
I recently developed a project with custom ANE and I get this error msg when compile ipa since I upgraded the sdk from 3.5 to 3.8.
ANE compile CMD:
adt -package -storetype pkcs12 -keystore ane.p12 -storepass 1234 -target ane yund.ane extension.xml -swc yunding.swc -platform iPhone-ARM -platformoptions platform.xml IDS.framework library.swf libIslandIDSANE.a
platform.xml:
<platform xmlns="http://ns.adobe.com/air/extension/3.5">
     <sdkVersion>6.1</sdkVersion>
     <linkerOptions>
                    <option>-w</option>
        <option>-ios_version_min 4.2</option>
                    <option>-framework Foundation</option>
                    <option>-framework StoreKit</option>
                    <option>-framework AdSupport</option>
                    <option>-framework QuartzCore</option>
                    <option>-framework UIKit</option>
                    <option>-framework CoreGraphics</option>
                    <option>-framework SystemConfiguration</option>
                    <option>-framework Foundation</option>
                    <option>-lz</option>
     </linkerOptions>
             <packagedDependencies>
                    <packagedDependency>IDS.framework</packagedDependency>
          </packagedDependencies>
</platform>
msg:
ld: file was built for unsupported file format ( 0x56 0x65 0x72 0x73 0x69 0x6f 0x6e 0x73 0x2f 0x43 0x75 0x72 0x72 0x65 0x6e 0x74 ) which is not the architecture being linked (armv7): C:\Users\timoo\AppData\Local\Temp\139d9782-79fd-422a-8c15-da1da2da8c53/IDS.framework/IDS for architecture armv7
Compilation failed while executing : ld64
help me
thx

Have you Found the way to solve this problem yet?
I have got the same problem. Here is the error log when building the IPA:
ld: warning: ignoring file /var/folders/c0/m8m1_z5915qblkj9d_7jhmcw0000gn/T/3cb383e9-0092-4b1c-909f-5c219b2fbcd4/Par tytrack.framework/Partytrack, file was built for unsupported file format ( 0x56 0x65 0x72 0x73 0x69 0x6f 0x6e 0x73 0x2f 0x43 0x75 0x72 0x72 0x65 0x6e 0x74 ) which is not the architecture being linked (armv7): /var/folders/c0/m8m1_z5915qblkj9d_7jhmcw0000gn/T/3cb383e9-0092-4b1c-909f-5c219b2fbcd4/Par tytrack.framework/Partytrack
ld: warning: CPU_SUBTYPE_ARM_ALL subtype is deprecated: /Users/apple/Documents/flexsdk/flex3.9/lib/aot/lib/libDebugger1.arm-air.a(avmplusDebugger .cpp.o)
Undefined symbols for architecture armv7:
"_OBJC_CLASS_$_Partytrack", referenced from:
      objc-class-ref in libcom.haibin.extension.PromotionAPI.a(partyTrackAPI.o)
ld: symbol(s) not found for architecture armv7
Compilation failed while executing : ld64
My platformoption.xml content is：
<platform xmlns="http://ns.adobe.com/air/extension/3.8">
    <sdkVersion>7.0</sdkVersion>
    <linkerOptions>
        <option>-ios_version_min 4.3</option>
        <option>-framework CoreData</option>
        <option>-framework UIKit</option>
        <option>-framework Foundation</option>
        <option>-framework Security</option>
        <option>-weak_framework AdSupport</option>
    </linkerOptions>
    <packagedDependencies>
        <packagedDependency>Partytrack.framework</packagedDependency>
    </packagedDependencies>
</platform>
And my build command are:
<target name="package" description="Create the extension package">
<exec executable="${FLEX_HOME}/bin/adt" failonerror="true" dir="${basedir}">
<env key="AIR_SDK_HOME" value="${FLEX_HOME}"/>
<arg value="-package"/>
<arg line="-storetype pkcs12"/>
<arg line="-keystore testkey.p12"/>
<arg line="-storepass 123456"/>
<arg line="-target ane"/>
<arg value="../${ANE_NAME}.ane"/>
<arg value="extension.xml"/>
<arg line="-swc ../swc/${ANE_NAME}.swc"/>
<arg line="-platform iPhone-ARM -platformoptions platform.xml -C ../iPhone-ARM/ . "/>
<arg line="-platform Android-ARM -C ../Android-ARM/ ."/>
<arg line="-platform default -C ../default/ ."/>
</exec>
</target>
File "Partytrack.framework " is in the directory "iPhone-ARM"

Is xmp files only availble for RAW files?

When we develop a RAW image with Camera Raw, we always get an xmp file with all the settings,
But after I developed a JPG image, I saw the Camera Raw Settings icon appeared above the right upper corner of the image thumbnail in Bridge,
however, I couldn't find the xmp file.
Is xmp files only availble for RAW files? JPGs or TIFs don't have xmp files for their Camera Raw settings??

Read-only didn't work for me, on a single jpg file, although it did lead to some interesting behavior. Set the read-only attribute on a jpg file in Windows XP and then tried the following:
1. Opened in Bridge, then into ACR 5.4. Performed some edits, then tried "Done", received permissions error and would not save edits.
2. Did the same except now invoked "Open", went into CS4 with edits intact and allowed saving out as different file. However, the ACR edits were not saved within the jpg, as expected, nor was a xmp created.
3. Removed the read-only attribute, repeated (2). Even though did not save file in CS4 the "Open" action did embed the edits into the jpg.
So read-only doesn't really allow creation of a xmp file, other than perhaps temporarily for transfer to Photoshop. It does lead to somewhat inconsistent behavior, in that I would have expected the "Open" to fail also since it could not bury the edits in the jpg.
Richard Southworth

Trying to copy a 10gb file to a memory stick but theres an error msg file to large for the file format of the stick. is there a way around this

trying to copy a 10gb file to a memory stick but there's an error msg, file to large for the file format of the stick. is there a way around this

If you use 'Disc Utility' you can format the stick (this will erase its contents) to be exFat which will still work with Mac and Windows but allow a larger file sizes to be placed onto the stick.
Disc Utility > Click the drive on the left > Erase (tab) > Change format to ExFat > Erase > Try putting the file on to the stick again.

ByteArrayInputStream as source for zip file entry corrupts the ByteArray

Hi All,
I have managed to create and add a (in-memory) zip file as an email attachment. I add a file to the zip file , then push data to this file via a ByteArrayInputStream.
Adding the file (created via ByteArrayInputStream) to an email works perfectly. If i then add another step and zip this file it corrupts the output.
It looks like it is turning the carriage return into a [] . Its 'almost right' as when I cut & paste the contents of the txt file i created (from the zip file) into Word it displays correctly, with the carriage returns. Is it some kind of encoding problem, or mime type issue?
My ByteArrayInputStream uses buf.append("\n"); for carriage returns. I think the problem is with
ByteArrayInputStream baIn = new ByteArrayInputStream( getAttachementNoFormat(eq_rt.getStoredProc()) );where I think i need to encode this somehow. Here is the complete code to create and add the zip file to an email. Any isuggestions will be appreciated.
//START of new ZIP code
                                                                                         /* Specify files to be zipped */
                                                                                        // Create temp file.
                                                                                        //File temp = File.createTempFile(fileName, ".txt");
                                                                                        //temp.deleteOnExit();
                                                                                        //BufferedWriter bOut = new BufferedWriter(new FileWriter(temp));
                                                                                        //ByteArrayInputStream baInTemp = new ByteArrayInputStream( getAttachementNoFormat(eq_rt.getStoredProc() ) );
                                                                                        //bOut.write( baInTemp.toString() );
                                                                                        //bOut.close();
                                                                                         String[] filesToZip = new String[3];
                                                                                         filesToZip[0] = "C:\\Program Files\\NetBeans3.6\\firstfile.txt";
                                                                                         filesToZip[1] = "C:\\Program Files\\NetBeans3.6\\secondfile.txt";
                                                                                         filesToZip[2] = "C:\\Program Files\\NetBeans3.6\\thirdfile.txt";
                                                                                         final String fileToZip = fileName;
                                                                                         /* Create a memory buffer to store the ByteArray, fixed size */
                                                                                         byte[] buffer = new byte[18024];
                                                                                         /* Specify zip file name */
                                                                                         String zipFileName= eq_rt.getReportName() + ".zip";
                                                                                         try {
                                                                                             /* Create ZipOutputStream to store the FileOutputStream */
                                                                                             // ZipOutputStream out = new ZipOutputStream(new FileOutputStream(zipFileName));
                                                                                             ByteArrayOutputStream byteArray = new ByteArrayOutputStream();
                                                                                             ZipOutputStream out = new ZipOutputStream(byteArray);
                                                                                             /* Set the compression ratio */
                                                                                             out.setLevel(Deflater.DEFAULT_COMPRESSION);
                                                                                             /* iterate through the array of files, adding each to the zip file */
                                                                                             for (int a = 0; a < filesToZip.length; a++) {
                                                                                                /* Print the filenumber being added to the zip */
                                                                                                System.out.println(a);
                                                                                                /* Associate a file input stream for the current file */
                                                                                               // FileInputStream in = new FileInputStream(filesToZip[a]);
                                                                                                   This ROCKS as it is passing a array into the text file .getBytes() seems
                                                                                                   to be the KEY in getting ByteArrayInputStream to WORK
                                                                                                //String strSocketInput = "TAIWAN";
                                                                                                //ByteArrayInputStream baIn = new ByteArrayInputStream(strSocketInput.getBytes());
                                                                                                //String strSocketInput = new String (getAttachementNoFormat(eq_rt.getStoredProc()).toString() );
                                                                                                //ByteArrayInputStream baIn = new ByteArrayInputStream( getAttachementNoFormat(eq_rt.getStoredProc()) );
                                                                                                 ByteArrayInputStream baIn = new ByteArrayInputStream( getAttachementNoFormat(eq_rt.getStoredProc()) );
                                                                                                //String strSocketInput = "TAIWAN";
                                                                                                //ByteArrayInputStream baIn = new ByteArrayInputStream(strSocketInput.getBytes());
                                                                                                /* Add ZIP entry to output stream. */
                                                                                                out.putNextEntry(new ZipEntry(filesToZip[a]));
                                                                                                /* Transfer bytes from the current file to the ZIP file */
                                                                                                int len;
                                                                                                while ((len = baIn.read(buffer)) > 0)
                                                                                                out.write(buffer, 0, len);
                                                                                                /* Close the current entry */
                                                                                                out.closeEntry();
                                                                                                /* Close the current file input stream */
                                                                                                baIn.close();
                                                                                            /* Close the ZipOutPutStream (very important to close the zip before you attach it to the email) Thanks DrClap */
                                                                                            out.close();
                                                                                            /* Create a datasource for email attachment */
                                                                                            // DataSource sourcezip = new FileDataSource(zipFileName);
                                                                                            DataSource sourcezip = new ByteArrayDataSource(byteArray.toByteArray(), zipFileName, "application/gzip" );
                                                                                            /* Create a new MIME bodypart */
                                                                                            BodyPart attachment = new MimeBodyPart();
                                                                                            attachment.setDataHandler(new DataHandler(sourcezip));
                                                                                            attachment.setFileName(zipFileName);
                                                                                            /* attach the attachemnts to the mail */
                                                                                            multipart.addBodyPart(attachment);
                                                                                         catch (IllegalArgumentException iae) {
                                                                                           iae.printStackTrace();
                                                                                         catch (FileNotFoundException fnfe) {
                                                                                           fnfe.printStackTrace();
                                                                                         catch (IOException ioe)
                                                                                         ioe.printStackTrace();
                                                                                       // End Of New ZIP code

I came up with 'a' solution (not sure if its the best way but appears to work)
\n = corrupt
\r\n = ok in zip

Need script for moving files to specific directories base on csv

Hi,
I have a question. I have about 2000 files (pdf), which I need move to specific directories and subdirectories, which are based on csv file.
Csv is looking like this:
filename;directoryname;subdirectoryname;subdirectoryname;.......etc.
I have a script for creating directories with subdirectories from csv file, but I need this script for moving files to this directories.....
Thanks a lot for every help.
Best Regards
Petr, OS X Mavericks

private function snapshotLastFrame():void
gotoAndStop( this.totalFrames );
_bitmapData                         = new BitmapData( stage.stageWidth, stage.stageHeight );
_bitmap                              = new Bitmap( _bitmapData );
_bitmapData.draw ( stage );
saveImageJPG( _bitmapData, "test.jpg", 96 );
public function saveImageJPG( bitmapData:BitmapData, fileName:String, quality:int ):void {
            this.jpgEncoder = new JPGEncoder( quality );
            this.fileReference = new FileReference();
            this.fileReference.save( this.jpgEncoder.encode( bitmapData ), fileName + ".jpg" );
Keep in mind that you need a few extra libraries to be able to create a jpeg.. (AS3CoreLib) can be found at googleCode.

Where is a good source for text files?

Hi
I've just finished implementing a huffman tree and been testing it out. It seems to be working fine - encoding and decoding results look correct.
However, I really want to test this tree out with a larger 'dictionary', so that I can construct a larger tree and check if performance is any slower. Does anyone know where I can find a collection of large text documents that I can easily download and have my code run over it?
I tried googling, but haven't came across anything useful. Ideally, I would like to find documents of different topics. e.g. medical, computing, and a more general type that resembles everyday language. The reason I am wanting these is so I can test the encoding of different text on different tree types. Thus, encoding a computer journal on a tree constructed from the frequencies of a medical text file, should yield poorer compression than encoding the same computer journal on a tree constructed from the frequencies of a computing text file.
Thanks

Google "project gutenberg" for a bunch of text.
Plain ASCII isn't enough for pictures and many fields' texts. So a lot of modern texts tend to be PDFs and such, which might not suit your purpose.
Maybe you could also use web pages as test data. Write a program that googles for "medical", downloads the first 100 hits, optionally replaces <.*> with a space, and runs your program on that.

WIS 10883 using large Excel File as source for report in WebI RichClient

Hi,
I'm trying to use a relatively large Excel 2003 file, say 7000 rows and 19 columns, as a source for a report in WebI Rich Client. When selecting a range of only 1500 records and 19 columns everything works, when accessing the full 7000 (or originally 30,000) I get this error message.
Does anybody know of a size limit for this and if so an option to adjust it? The only resources for this very limited.
Thanks
Norman Ruppert

Tina,
I'm not sure why you are so negative to having Excel in the mix.
Excel is only used at development time - its mearly used as a design interface to build the xcelsius model that feeds data and controls components within the flash file that xcelsius generates.
Excel is not used at run time in any way (unless one uses a third party connector to use an XLS as a data source of course).
If you attempt to use xceslius without using the OLE embeded Excel sheet at design time you will only be able to create VERY simplistic dashboards.
The new connectivity in version 4 just removes a design step to make development simpler my combining direct to components - but behind the sceens i believe it is really only connecting to a hidden part of the model not shown the the Excel interface at design time!
i think we would all agree that having excel can be a pain at design time (especially those that used/use live office!) but it does offer a pretty good interface for building very intuative looking models behind your flash components.
cheers,
Jeremy.

Need Help for Jar Files Operations!

Hi,
I am trying to extract files from jar file using the java code. Does any one knows how can one do this using java code.
Or
is there any facility that I can use the unjar command inside the java code to extract it. I wonder about this!
Or
does java povide Java APIs provides facility for this. I have gone thourgh java.util.jar package but am not to get how can this be used for the above purpose?
Thanks.
Huzefa

The following will display each file in the zip/jar file to the screen.
ZipInputStream zin = new ZipInputStream( new FileInputStream( "z:\\myzip.zip" ) );
ZipEntry entry;
while( (entry = zin.getNextEntry() ) != null ) {
     System.out.println( "Entry: " + entry.toString() );
     byte[] buf = new byte[ (int)entry.getSize() ];
     zin.read( buf, 0, (int)entry.getSize() );
     System.out.write( buf, 0, (int)entry.getSize() );
Jar* extends Zip*.

File Handling (Check for existing file)

now my problems is that i need to have a code that upon a request checks for a file (in the home dir) and if the file exists reads the information and ouputs it. here is an example:
check if file TEST.DATA exists?
check approved TEST.DATA exists
information outputed...
if the file is missing i need to have an error message...
PS. sorry if the question falls under "lame" but i am fairly new to java and i dont know the commands that well... thank you in advance!

File.exists()
Reading Text from a File
Useful places to seek for information:
- Java API documentation
- The Java Tutorial
- Code examples from Java developpers Almanac
- Google
- ...

Permissions for website directories/files & Share Points for managing files

Hello.
I'm wondering if anyone could lend some advice in how to best set up permissions, both POSIX and ACLs, for the following setup?
#1 - Permissions for directories and files for hosting a website (via OS X 10.5 "Web" GUI). Basically, I'm curious as to what people suggest for the basic files for the directory (and sub-directories and files) that go into the backend (html, images, etc.) of a website? I'm going to be being files over from another machine, so I may need to propagate these permissions once they've been moved over?
#2 - Permissions (ACL) for allowing users to access these directories and files for editing, etc. via client Macs on our LAN (this server is going to be a development web server for initial building/testing).
Any advice would be much appreciated!
Thanks,
Kristin.

Hi Kristin,
The "other" or "everyone" group should not have "write" permissions to any files under your website document root folder. The Apache web server runs as user "www" ... "www" is usually in the "everyone" group, thus allowing read-only access to the website.
You can set up the owner of your files to an admin account. Perhaps set up a group with write permissions to the file shares where your website files are.
You must first analyze who should have access to what, base your groups on that ...
Ted

Few data missing from CTX file, need source for CTX file

Similar Messages

Maybe you are looking for