Few Questions From A New

what's up? new creative user, just jumped on board in april with a Muvo Micro N200 GB and bought my little sis a 256 Muvo TX FM. I just have a few questions for the experienced users.
. What's the point of the Zen Micro? Spend 80 bucks on a 5 GB player when you can buy a 20GB player for around 200 (Zen Xtra), what sense does it make?
2. Why doesn't the zen touch come in 60GB capacity like the XTRA?
3. Why is the Touch soo much more expensi've than the Xtra?
4. Why are people still buying ipods when creative is >>> the ipod in almost every way? Show me an ipod with 20 gigs that can hold 0,000 songs, FM radio, voice recorder, and with a 24 hour battery life.
5. why is Cnet.com sooo biased towards the ipod?
6. WHERE is the zen sleek available? I checked amazon.com - not there.
7. what's the difference between the muvo micro n200 and the zen nano plus that I've seen in walmart? features are the same.
8. Why doesn't creative include some REAL headphones with their mp3 players instead of those pieces of feces that they come with now? After spending 300 for a 40 gig zen touch, I deserve some decent headphones!
dang, didn't realize I had soo many questions.

Okay, let me give this a try:
. Simple - the Micro is smaller. For many folks, convenience and portability are more important than capacity. Try fitting an Xtra in your front pocket.
2. Again, it's a size issue. The Touch uses a single-platter .8 inch dri've. In any player the bulk of the space is taken up by the dri've and the battery. bigger dri've=bigger player. The Touch was designed to compete with the itty-bitty Ipod.
3. The Touch is a newer model that incorporates the whole "touch" interface. Newer things are almost always more expensi've.
8. No company provides decent headphones with their player. Have you ever heard Apple's headphones? Part of this is cost, and part of it is that for many people, especially audiophiles, headphone choice is very personal. It is akin to why most bikes don't come with pedals.
There you go Bitch!Message Edited by cameron on 08-02-2005 07:35 AM

Similar Messages

A few questions from someone new to Aperture (and DSLR photography)

Hi - I have just got my first DSLR camera (A Nikon D3000) and am trying out Aperture 3. I had a few questions which aren't all just necessarily Aperture related:
I have imported my library from iPhoto, however now all my albums are in alphabetical order, rather than date created. I only seem to have the option to arrange my albums by, "Kind", "Name" or "Manual". Any idea how I restore the date created order?
This may be too large a subject for here (I should probably buy a book on the subject), however JPEG, NEF and TIFF - I am shooting in raw mode which is generating NEF files. I had tried RAW+JPEG, but the basic JPEG this creates is really quite poor. The NEF files are generally around 7-12Mb. If I open them for editing in Photoshop, a TIFF file is generated in Aperture which looks to be over 8x the size of the original raw file, sometime over 100Mb. I then seem to be able to save it back as a JPEG at pretty much maximum quality which results in a file slightly smaller than the original raw file. Is it necessary to keep the large TIFF files once I've created a jpeg? Am I best off just keeping the finished jpeg and the original raw file in case I want to make changes?
When publishing to flickr, It would be good to be able to just publish the latest versions of all photos in an album. ie not the same photo in tiff, nef and jpg format. Is there an easy way to do this, or is it a case of manually picking each one?
Also - When uploading NEF files to flickr it would appear to convert them to jpg, which is kind of good I suppose, but does anyone know what level of quality the jpegs created are? Am I best off converting them to jpeg myself first and then uploading? If I did this then my albums would be full of duplicates in different formats, which leads back to my previous question about uploading just one version of each. That may be a question for the flickr forum...

You have jumped into the deep end with both feet.
With Aperture running select the single the Browser and you will find the sort controls under the Mobileme to New Smart Album icons depending on how stretched out you have the Inspector panel. There is the ability to sort by just about every parameter there either ascending or descending.
Can Aperture not convert your NEF files? You dont have to have Tiff files at all. See your Preferences regarding External Editor. How much storage space and your archiving requirements will influence your decision about retaining Tiff files.
I know nothing about Flickr but assume you will have to choose your own images. I doubt a Smart Album can select exactly what you need.
When uploading files online galleries generally optimise the images. You are wasting your time uploading massive Tiffs IMHO. Most web services work with jpegs I understand. Consult the Flickr help and support for their requirements and advice.
Enjoy your new hobby.
AW
Whether you have the room to save Tiff files as well as Raw files will probably decide whether you keep them or not.

Few questions from a new user

Hi Guys
I've had my 3gs 16GB for about a week now. I am absolutely loving it, but I have a few questions.
I am completely new to apple products. I had never used itunes before I bought my phone.
First question is about the battery. I know this has been greatly discussed and I have searched through the forums and have found just about all of the answers I was looking for, so this is more of a comment than a question. I was a little worried about all the issues people are having with their battery life, so I did a few tests. I am pretty happy with the results. I have the following settings:
wifi - on
notifications - on
brightness - ~40%
bluetooth - off
3G - on
push - off
fetch data - hourly
After 48 hours the battery is at 10%. Usage is at 5 hours which included mostly internet browsing on wifi, about 20 sms messages, and about 10 minutes of calls. This is about what I was expecting. The only question I have about the battery is about charging. I am going to charge it daily and once a month fully drain and recharge. I haven't found out if it is ok to leave it plugged in after it has fully charged. Do I need to take it of the charger when it is fully charged, or does the battery shut off and just use the external power source? Ideally I would like to charge before I go to bed and take it off the charger when I wake up.
Next question is mainly about accessories. I would like a good case that is minimal, but still providing protection from scratches. Are there any good recommendations or is it just kinda personal preference. Also, has anyone tried some of the screen protectors on the market? Can you tell that they are there, or do they give you any problems with the "touch" and "feel" of the screen?
Thanks

joshdsalley wrote:
Hi Guys
Next question is mainly about accessories. I would like a good case that is minimal, but still providing protection from scratches. Are there any good recommendations or is it just kinda personal preference. Also, has anyone tried some of the screen protectors on the market? Can you tell that they are there, or do they give you any problems with the "touch" and "feel" of the screen?
Thanks
I don't use a protective case on my iPhone has I think it spoils the look of it. Instead I have a leather case that provides protection from the screen getting scratched and can be easily taken out when I need to use the iPhone.
The case I got has a soft velveteen interior which protects the screen from scratches. It wasn't cheap (£25) but it is well made and is lovely soft leather, and you can tell it will last.
Here's the link to it:
http://www.knomobags.com/eshop/knomo_product.asp?SS=5&C=84&CA=227&P=394
I have read though that some screen protectors can interfere with the photo sensors on the iPhone (there the 3 little dots that you can see to the left of the earpiece) whereby the screen will remain on or off when it shouldn't be.

A few questions from a new tech...

It is based on the conversion process of a Cisco 6500 Series switch (WS-Sup720-3B release) w/MSFC3 from a hybrid mode (CatOS/IOS) over to a native mode. I've found a few conversion processes online however, I do not know which process is the best to use (as some of them seem outdated) and detailed enough:
http://www.cisco.com/c/en/us/support/docs/switches/catalyst-6500-series-switches/12031-catos-ios-conversion-6500k.html
http://www.cisco.com/c/en/us/support/docs/switches/catalyst-6500-series-switches/70273-70273.html
http://www.ciscopress.com/articles/article.asp?p=102093&seqNum=5
Also, another question that I have is about the correct, most up-to-date software. Whenever I use the Cisco software download navigator to search for an applicable image, I see different images based on various network requirements. Are these images applicable to this process?
https://software.cisco.com/download/release.html?mdfid=280829702&flowid=20135&softwareid=280805680&release=15.1.2-SY4a&relind=AVAILABLE&rellifecycle=ED&reltype=latest
Any help would be very much appreciated.

It depends on how complicated your configuration is.
When I did this a long time ago I just did it by hand ie. I didn't use a conversion tool I just created a new configuration in a text editor and then copied in the new configuration.
A lot of the commands in a configuration are defaults and you don't necessarily need to replicate them because you will get a new set of defaults when you convert.
If you have a lot of extra configuration eg. QOS then it may be worth using one. It really depends on how well you know what your switch is currently doing.
In terms of IOS image key things are -
1) feature set ie. you need a feature set that supports all the things you are currently doing
2) memory on your supervisor and whether you have enough
3) module support ie. you need to check the release notes for each release because they may not support all your existing modules
Jon

A few questions from a new iMac user!

So far I am loving this computer! However there are a few things that I can not figure out how to do and really dont have time to go to the store for a class at the moment. So hopefully you will be able to help me out.
1. We have iWorks installed and I am trying to make a simple calendar to hand out to my students with information about due dates and such. Previously I was able to do this on Word but I can not figure out how to do this here!
2. How do I copy and paste?
3. With this new mouse how do I get it so that there is a right click?
Thank you all so much and I am sure you will see me on here plenty!

1. We have iWorks installed and I am trying to make a simple calendar to hand out to my students with information about due dates and such. Previously I was able to do this on Word but I can not figure out how to do this here!
Pages, presuming you're referring to Apple's iWork suite, doesn't have a template for a calendar included. There are some suggestions in this thread:
http://discussions.apple.com/thread.jspa?messageID=6949516
You might also consider using iCal. You could set up a calendar just for student dates and then print that calendar only.
3. With this new mouse how do I get it so that there is a right click?
You'll need to go into the Mouse system preferences and define the right-click action. The default is for the "left-click" and "right-click" both to be a standard click.
Hope this helps.

A few questions from a new user.

Good afternoon,
While I have been doing graphic art as a hobby for an extreemly long time, i am very much a student per say when it comes to photoshop having just got it recently. So please exuse me if my questions have simple answers i just simply have yet to find.
I am currently using gimp and photoshop CS5, i use them both since soome things i simply do not know how to do in photoshop.
1) Sometimes I will use gimp to set the transparency color on an entire image to try to capture certain aspects of an image like highlights or shadows to place into another image.
an example would be like, say i have a flame in the darkness and you can make out some Silhouettes in the background. I want to eliminate all the black to capture the flame and the greys/highlights. How would i set the transparency layer to remove all or part of the black in the image.
2) How do i scale a layer and keep it center of the image?
3) How do i make a custom pathing image and have the brush follow it?
4 when i have a brush following a path is it possable to have it auutomaticly turn as the path turns?
I answered two of my own questions while writing them so i guess for now i only have the two questions. I am sure i will have more as time ticks on. Thanks for reading.

OK, I am sorry I don't think i am making my self clear enough what i am trying to do.
here is a more complex example:
In this image I am making the windows transparent so they can be seen through while keeping the walls solid. to do this i take a section off the windows and set a color transparent, In this case i set light blue (94d3fb) as tranparent but only with in the window portion cause i do not want to see through my walls.
Now with the windows transparent i can use them to look out of and see the things on the other side.
In gimp i just make the color transparent,
would I use a mask and perhaps set the mask to mask a praticular color?
Again i apologise, i am simply trying to learn how to do what i know how to do in gimp.

Why can't I post a question from my new system?

Hello All:
I was just trying to post a question from my new mbp but it wouldn't allow me to do anything. It continually gave me a message highlighted in 'red' that i was;t allowed to modify or post anything. I've been asking questions for quite a while and have never seen this. I also happen to have my older bmp, also logged onto the 'Apple Discussions' site, open beside me. Can anyone explain this to me please? BTW, my new system obviously has Yosemite on it while my older bmp has Lion. Thanks in advance, to all those who respond.
Regards,
Ciaochiao

ChitlinsCC, I'm adding your reloaders to my article on how to make using ASC easier.
Here is my ASC work flow...
1) I login.
2) Block the automatic 30 minute logout.
     Unless you do something every thirty minutes you get logged out. The forum software waits to tell you this as long as it can to keep you in suspense ;-) . Filling out a reply is the exception to the thirty minute window.
        Start an auto reloader.
Safari = SafariTabReloader
Firefox = ReloadEvery: "Reload web pages automatically"
Others = Reloaders | Cerberus - Support Center
You need to pick a page that will reload over time without stalling out. It's ASC. I've found my profile display the best to use. I get my Profile page after some logins. It's ASC. Change rccharles to your apple id.
https://discussions.apple.com/people/rccharles?view=discussions
Reply technique
Open a new browser window. Pick some discussion. Open a reply window. As long as this reply window is open, you will stay logged in. The 30 minute times is reset as needed by the ASC software.
3) I open another window to do my normal ASC browsing.
4) I have a FireFox bookmark to goto the discussions that I have participated in. I've modified it to add on the content stuff.
         turingtest2 recommends. Change rccharles to your apple id:
https://discussions.apple.com/people/rccharles/content?filterID=participated~obj ecttype~objecttype%5Bthread%5D
5) Use turingtest2's generated links with the /content suffix as browser bookmark to the ASC discussions:
Site map of Communities and Categories
https://discussions.apple.com/docs/DOC-2463
6) Adjust the ASC web page layout.
For FireFox
I run with Hiroto's modification to user content. This is the only way these forums are readable for me. How to adjust the format and layout of ASC Web Pages:
https://discussions.apple.com/docs/DOC-7501
For Safari
"ASCPowerTools is a Safari Extension designed to give more control"
http://www.etresoft.com/ascpowertools
7) Read and answer my old posts. I kind of memorize the time I last posted. ( It's way bad that apple eliminated the last poster to a thread. )
8) I use tabbed browsering. From a list of discussions, hold down the command key then click on the link. You get two tabs this way. The original window will keep where you have been.

May be slightly simple question from a new Mac user: Why can't I quit safari? I cannot quit it from top menu bar neither to do it from dock? All other apps are working normally.

May be slightly simple question from a new Mac user: Why can't I quit safari? I cannot quit it from top menu bar neither to do it from dock? All other apps are working normally.

Or you can actived the right button on your magic mouse and click on they icon in the dock. then you select "stop" and it's out of your dock.
Greetings
*update: Sorry, my mistake! I didn't read your message correct! Sorry for the inconvience!

My New Curve 8330! (few questions from a noob!)

So I finally got the Curve 8330 - I had been waiting all this time for the Thunder but decided yesterday that if my fingers are too fat for an iPhone, then they will be for the Thunder as well. Anyways, I LOVE the Curve thus far...just a few questions.
#1) Do the "messages" and "[email protected]" icon serve the same purpose? If so, which I think they do, how do I filter the "messages" icon so that ONLY my incoming SMS messages are shown??? As of now, the "messages" icon is cluttered with e-mail, SMS, bb mesanger & voicemail! I HATE THAT! I'd rather keep it clean and organized so that If i wanna view my SMS messages, I click on "messages" If I wanna view my bb messanger messages, I click on the bb messanger icon, If i wanna see my e-mails, I click on the "[email protected]" icon and so forth. Is there a way to filter it this way???
#2) When I send an e-mail, I automatically get THAT e-mail sent back to me! How do I disable this function? I have no need to recieve in my INBOX the e-mail I just sent out.... I tried going into "Messages->options" and turning the "hide sent" to "ON" but this problem still occurs...... Any help on that?
#3) I have this stupid "Facebook" icon in my menu, how do I delete this permanently?
Thanks everyone, I'm sure i'll have more questions as I'm readin through!

Yes, when you go into your messages and hit the menu key and select options and general options. Email and sms messages should be set to separate. Hit the back key to the right of your trackball to save. If you do not see an icon now just for sms and mms, do a battery pull. Take the battery out with the phone on and leave it out for 30 seconds. Replace it and allow the phone 1-3 minutes to reboot does the icon appear now?
~Lorrie~ Master of All Things Blackberry!

A few questions from a REAL beginner

OK, so I am very very very new to HTML, CSS and Dreamweaver and I have a few questions. But before I start let me just state that I have been messing around with HTML, CSS and Dreamweaver for like one week so take it easy if these questions are obvious.
1. Is there a way to create a type of "sign in" function that is relatively easy? Or do you have to have knowledge of many different scripts and languages to do so?
2. I would like to have an archive system where if I post an article on my site and then two days later i post another one it saves the first one i posted and can be viewed in some form over time. Is this possible?
3. If multiple people will be posting on my site is there a way I can have it set up where the articles automatically say "posted by _______" after each person signs in (If #1 is possible of course)
4. And lastly, this one is similar to #2 but is there a way to make a blog type setup in Dreamweaver? Yes, yes i know there is wordpress and I frequently use wordpress but you can only have on blog page per url and i dont like that. I am trying to be able to write multiple articles in a day and would like for them all to be reached pretty easily.
Thanks in advance to the brave person who will put up with my childish questions.
And just so you all know i would like for the person answering these to explain them as if they were talking to a child lol

Heya,
First you have to choose a scripting language in order for one to direct you to tutorials on how to use it. I recommend php as it seems to be the most widely used and supported. Then go over the the Application Development forum since that's where most discussions of this nature reside.
Whatever scripting language you choose you'll have to setup a database first. I recommend MySQL; again as it seems to be the most widely used. Then connect your database to dreamweaver through the Server Behaviors window. After that you can add server behaviors to help in your development. For instance Dreamweaver has server behaviors to create registration, signup, restrict access pages. Then you can have a page that uses a Insert Record, Update Record, Remove Record server behavior to add, edit, or remove blog entries into your database. After that have another page that uses the Recordset server behavior to get a record of the database. You can then display the record on the page by dragging the value of the recordset from the Bindings Window in Dreamweaver. There's also repeat region server behavior to repeat the record to show (all or) a set amount of entries like blog1, blog2, blog 3 etc. There's also a Paging server behavior to automatically create page indexes of blog entries so first 10 on one page with links to page 1, 2, 3, 4 previous, next, first last, etc. to show additional entries on respective pages.
Your best course of action is to have a definite agenda of development goals. First choose a scripting language, then setup your database. Connect your database to Dreamweaver, then add server behaviors. That's the workflow for dynamic development. After that creating your feature is basically only a matter of what server behaviors to use and what queries to run to your database. If you have any other questions about development it may be best to ask further inquiries in the Application Development forum. If/when you do ask in the forum about stuff like this then mention what scripting language and database model you're using.
Oh and also if this is your first venture into dynamic development then do yourself a favor first and setup a local testing server on your computer. What kind of computer are you using? Mac/PC and what OS version? There's different ways of setting up a local testing server depending on your computer and OS.
I am in the Application Development forum a lot so if you have any other questions regarding dynamic application development just hit me up there.
Hope that helps!

A few questions from a newbie!

Hello!
So, I am VERY new to using Mac productions and I just got my Macbook recently.
I have a few questions that may seem to have a very simple and obvious answer but like I said, this is all new to me...
1. Do I have to install a anti-virus/spam program? If so, which one?
2. Time Machine- this is the program to back up files right? when I try to set it up it doesn't give me any options for a back up disk.
Anything else that I should defiantly know please let me know!
Thanks so much!
Alanna.

Alanna J wrote:
1. Do I have to install a anti-virus/spam program? If so, which one?
Not unless you want to. I have had Macs for 2 years and never had a problem. This is a good one if you decide to install one. ClamXav
2. Time Machine- this is the program to back up files right? when I try to set it up it doesn't give me any options for a back up disk.
You need an external hard drive attached to use with Time Machine. This explains it.
Mac OS X 10.5: Using Time Machine and troubleshooting Time Machine issues
Anything else that I should defiantly know please let me know!
This is info that will help you get the best life from your battery.
It is OK to leave your battery hooked to the charger most of the time. The only time I unhook mine from the charger is when I calibrate or for a few minutes to use in another room. Have you calibrated your battery yet? You should calibrate every two months or so to keep the battery fully functioning. If you use your MacBook infrequently, it’s best to re-calibrate the battery at least once a month.
It is best not to use your battery unless you need to. Some people have hurt their batteries by charging then discharging every time they use the MacBook. This will age a battery very fast and cause you to buy a battery sooner than you should have too. Don't discharge the battery just because you used it. Li-Ion batteries prefer small charges over big ones. Use it and then plug it in as soon as you can. The only time my Battery is ever fully discharged is when I'm doing a calibration.
The following links have good information about the MacBook and the care of it's battery.
Apple: Tips for maximizing your Notebook battery charge
Apple MacBook and MacBook Pro: Reduces processor speed when battery is removed while operating from an A/C adaptor
Apple portable computer's battery does not show a full charge in Mac OS X
Look here and here for some good tips about battery care.
Apple MacBook: How to remove or install the battery
Apple: Determining Battery Cycle Count
Apple: Use and cleaning of MagSafe power connector

A few questions from a prospective GarageBand user...

My sister got a new Mac last year, and I love messing around on garageband, but I had a few questions.
I have only recently started to mess around with the non software instruments (i.e. playing an instrument or singing into the microphone that is built into the computer)...I was wondering, is there any way to hook up a better mic to the computer so that I could get better sound quality??
Also, instead of using the keys on my computer, is there any way I could buy a synthesizer at a place like best buy and hook it up to the computer and play it with Garagebad??? Would I be able to use all the "software" sounds that come with the synthesizer as well as the ones on the computer? Could it hook straight up to the computer, or would I have to use a microphone to get the sound off the synthesizer??
Thanks for the help!!

I need a "controller" keyboard in order to play with garage band
a controller to record MIDI (play GB's instruments), if you want to use GB like a tape recorder you could record the audio from a synth (keyboard) into GB
I can't plug in an electronic drum kit that I physically use drum sticks to hit
if it's a MIDI controller drum kit, than you should be able to do so with a MIDI interface. if not, like above, you could use GB liek a tape recorder and plug an audio out of the kit into the Line-In on hte mac.
playing the guitar on garage band as one of the external instruments, what is the best way to do it??
use an audio interface:
http://www.bulletsandbones.com/GB/GBFAQ.html#interfaces
some people find pugging a guitar directly into the mac, though most do not:
http://www.bulletsandbones.com/GB/GBFAQ.html#pluginguitar
(you can certainly try, it's nearly free, so why not)
Would I have to buy a good external microphone and just put it in front of the amplifier that the guitar is plugged into to get the best sound??
that's the way i do it, and to really capture that amp sound, I think it's best, though it's a little more complicated because you can't really plug a mic into a mac, again you need an interface/preamp

Questions from a New User

I have just started using LabVIEW 7.1 Student Edition w/ NXT Toolkit. I have a few questions I would like answered.
Loops: In NXT-G, you could make a loop run a certian number of times. How is that done in LabVIEW?
Variables: In NXT-G, Variables could be easily created. In LabVIEW, all I can find is the LOCAL variable. I can't figure this out.
Documentation: Where is a good user manual or set of tutorials?
How on Earth do arrays work?
I'd like it if someone can help me with these.
Team RoboSquad
http:\\teamrobosquad.blogspot.com

Hi RoboSquad -
You certainly ask lots of questions -- a good characteristic for a beginner to have! I don't have all the answers, but hopefully I can address some of your queries.
Loops: sounds like you've worked out the idea that you can watch the loop counter (i) of a while loop and wire a true value into the stop condition terminal when you've finished the number of iterations you want. Albert's comments are correct for "for" loops in full LabVIEW, but you're correct that the NXT Toolkit only includes "while" loops. Auto-indexing will still work; see my comment on arrays.
Variables: local variables are basically "references" to front panel indicators or controls, and can be read or written just like normal variables. But depending on what you're really trying to do, just adding a constant to the block diagram or using wires to pass a value to different parts of your program may be a better solution.
Documentation: the LabVIEW help is pretty extensive and comes with LabVIEW. You can also use the Example Finder to search for examples for a particular topic, including "while" and "array."
Arrays: from your post, it isn't clear to me whether you're completely unfamiliar with what an array is, or you're just confused by LabVIEW's implementation of them. If it's the former (what is an array?), your best bet is to use Google or Wikipedia to build some basic knowledge. If it's the latter (how do arrays work in LV?), try using the Example Finder to find and work through some examples. If you're still confused, try to ask a more specific question. One thing that may be confusing is that, by default, arrays don't have a type. If you drop an array constant on the block diagram, you get an array of <nothings> with a black border. To tell LV what types of values will be in that array, you have to drop a constant of that type inside the black box: a numeric constant, a boolean constant, a string constant, etc. Then the array constant which change color to match the data type it will hold, and you'll be able to type in values for the different elements of the array. Maybe that's the key realization you're missing?
Debug gray-out: when you turn on Execution Highlighting on a LV block diagram, LV will gray-out parts of the program it hasn't executed yet. Once the sensors have been read and are ready to be displayed, the meter indicator should get "re-colorized."
Input dup: "dup" is an abbreviation for "duplicate," meaning you'll get back the same value that you wired into "Input." This is purely an aesthetics thing; it makes block diagrams a little less messy. Rather than wiring one value separately to a whole bunch of subVIs in your program (and having wires going around all of your subVIs), you can instead wire that same value "through" each of the subVIs. This results in a clean-looking diagram where the subVIs look like traincars sitting on a "railroad track" of wires.
Whew! That was certainly a long post, but I hope it gave you some new ideas to investigate. Let us know when you have more questions!
James Blair
NI R&D

A few questions regarding my new iPhone

A few questions:
1. I notice that if I am browsing a second page on my browser for about a minute and then navigate back to my first page... it's "blanked out" and am forced to refresh. Is this normal? Any way around this? Not particularly useful when on Meebo or when I'm trying to compare movie time on two different movie theatres.
2. Is there any way to save images from a site or from an email to my phone? I know I can't receive MMS so I thought I'd email me a picture to add it to my contacts and couldn't find a way. I also browsed online for an image and couldn't save it nor add it to a contact either. Any way to do this? I had to wait to get home and sync the images to my phone.
3. I noticed that the iPhone's connector is the same as my iPod's connector, but if I plug it into my iPod's dock, a warning comes up that warns me it's not designed for the iPhone. Will I harm my iPhone if I plug it into my car charger, wall charger, dock that's AVed into my TV? I'm just really worried that it'll screw my phone up.
4. I read somehwere I can open PDF's on my iPhone. Can I save a PDF to my phone and open it somehow?
Thanks!!

1. I notice that if I am browsing a second page on my browser for about a minute and then navigate back to my first page... it's "blanked out" and am forced to refresh. Is this normal? Any way around this? Not particularly useful when on Meebo or when I'm trying to compare movie time on two different movie theatres.
This is normal - in my experience anyway but not with all websites. It doesn't do the same when I have one page open on these discussions, navigate to another page and then back, the discussions page I had opened is not refreshed.
2. Is there any way to save images from a site or from an email to my phone? I know I can't receive MMS so I thought I'd email me a picture to add it to my contacts and couldn't find a way. I also browsed online for an image and couldn't save it nor add it to a contact either. Any way to do this? I had to wait to get home and sync the images to my phone.
Not supported from a website or from a received messages. You must do as provided with your last sentence - at the present time anyway.
3. I noticed that the iPhone's connector is the same as my iPod's connector, but if I plug it into my iPod's dock, a warning comes up that warns me it's not designed for the iPhone. Will I harm my iPhone if I plug it into my car charger, wall charger, dock that's AVed into my TV? I'm just really worried that it'll screw my phone up.
If you get this warning you shouldn't ignore it. Even though the connection type might be the same, if the device is not compatible with the iPhone it can cause problems or potential damage. There are auto chargers that specifically indicated - made for or compatible with the iPhone. I purchased a car charger that is compatible with my iPhone and with my iPod with video.
You can alway check with the manufacturer of the device to determine if the device is also compatible with the iPhone regardless the warning but this should be in writing via their website or provided via email.
4. I read somehwere I can open PDF's on my iPhone. Can I save a PDF to my phone and open it somehow?
You can view PDF, Word and Excel documents attached to a received email from within the received message but you can't save the attachments outside of the message.

A few questions from possible Apple TV newbie

Hi all,
I am interested in buying Apple TV and have read the product description on the Store section.I have a few question as I don't quite get how it works.
I watch digital/freeview TV currently on my iMac using a USB eye-TV thingy. Works Great!
I share WiFi connection with my neighbour to get onto the internet. Good speeds, good signal and works great.
I don't own a 'regular' TV Set.
Would adding Apple TV work here? Can I connect this and make it work or am I missing the point completely?
Any pointers to user guides, previous posts or tips would be great.
Thanks y'all.

stellamaris5 wrote:
Would adding Apple TV work here?
think of TV as a way to get your iTunes library (plus some internet related features such as youtube and movie rentals from the iTunes store) to a HDTV.
if you don't own a HDTV, TV is not for you IMHO.
JGG

Few Questions From A New

Similar Messages

Maybe you are looking for