Few questions regarding Oracle Scorecard and strategy management.

I have following questions regarding Oracle Scorecard and strategy management:
1. What are the ways in which i can show status of a KPI, like we have colors and symbols, what are others?
2. can we keep log of KPIs, store them, keep report of feedback/action taken on that?
3. Does Scorecard and strategy management have ability to retain history on feedback and log of
entries i.e. date/time, user name?
4. Does Scorecard and strategy management have ability to use common mathematical formulas e.g. median, average, percentiles. Describe.?
Thanks in advance for your help.


Similar Messages

  • A few question regarding oracle Vm (and virtualizing Db 11g)

    I've just started evaluating Oracle vm for our next deployment.
    One of the systems I'll need to virtualize is Oracle db 11g. As far as I understand the oracle DB template only comes with ASM? I would prefer to use LVM. What is the best way to install db into virtual machine without asm? Should I start with EL 5.2 and configure it, or could I somehow use the EL that comes with the template?
    Regarding LVM: I'm planning to create different volume groups, each with just one logical volume. These volumes would be mounted to guest as /u01, /u02 ... and so on. All volumes will be created on mirrored disks/partitions. Later, I could just move, expand, strip volumes as db usage will require. Does that sound ok?
    And another question regardin oracle vm: in the manual, chapter 4.6.2 says: "Install an operating system. This may be done a number of ways.
    ■ Install an Oracle VM Server-enabled operating system from CD-ROMs...."
    Is there a list of server-enabled operating systems anywhere? And maybe more detailed explanation of this step?

    Jernej Kase wrote:
    One of the systems I'll need to virtualize is Oracle db 11g. As far as I understand the oracle DB template only comes with ASM? I would prefer to use LVM. What is the best way to install db into virtual machine without asm? Should I start with EL 5.2 and configure it, or could I somehow use the EL that comes with the template?I would probably start with the standard EL5 template instead. The Database template is designed to automatically configure and provision the database with ASM and would probably take longer to dismantle.
    Regarding LVM: I'm planning to create different volume groups, each with just one logical volume. These volumes would be mounted to guest as /u01, /u02 ... and so on. All volumes will be created on mirrored disks/partitions. Later, I could just move, expand, strip volumes as db usage will require. Does that sound ok?It sounds OK, but ASM does all of that and more. It is also faster (particularly on Oracle VM, as it uses direct access to the disks). ASM also does automatic data levelling and striping. With 11g, I would strongly recommand ASM over LVM for your storage.
    Is there a list of server-enabled operating systems anywhere? And maybe more detailed explanation of this step?There isn't a list -- that's possibly badly worded as well. If you don't want to use one of the paravirtualized Oracle Enterprise Linux templates available on eDelivery, you can use any operating system installation CD in ISO format. Note that installations from an ISO are done as fully virtualized guests (i.e. hardware virtualized) and require Intel VT-x or AMD-s extensions to be present and enabled. Hardware virtualized guests are also not as fast as paravirtualized Linux guests.
    Oracle only certifies Database 11g running on Enterprise Linux in paravirtualized mode. The simplest way to deploy this is to use the provided templates.

  • A few questions regarding SAP EWM and WM

    I have a few general questions regarding the differences between EWM and WM:
    1) What are the benefits of EWM-MFS compared to WM + TRM (especially in terms of SPS)?
    2) The Quality Inspection Engine (QIE) can also be used by SAP WM, right?
    3) There is RFID-support in EWM, so EWM is able to communicate directly with SAP Auto-ID, right?
         But I have heard that SAP PI is necessary in some cases, when and why?
    4) Is there something new in EWM regarding goods receipt processing?
        I have read that the splitting of inbound delivery items is possible in EWM in case of missing inbound delivery items. Is this really  a new feature?
    5) EWM can easily be connected to SAP BW for reporting purposes, what about WM?
    6) What about scalability if the warehouse grows?
    7) Is there any information about the costs of using EWM compared to WM and vice versa?
    I appreciate any kind of help.
    Thank you.

    1. What does SAP offer as a product for dWM? Is it a u201Cspecialu201D installation of the SAP framework dedicated to WM or is it a standard ECC box where only the WM module is used?
    There are two version of DWM. One is Decentralized WM as a part of ECC and another one is EWM as a part of SCM. Both are decentralized.
    2. My understanding is that the interfaces between ERP and dWM can support some non-real time operations (like when the main ERP system is down, the dWM can still perform some operations). Considering that the transactional interfaces are based on BAPIs, how does SAP achieve this interfacing in non-real time environments? I am thinking you can complete the different processing unless both systems are up
    When it comes to interfaces, DWM needs Deliveries from ERP. That's it, WM can function from there independent of ERP system. But, WM defenitely needs to communicate back PGI and PGR and other posting changes . So, in case ERP is down, even though PGI / PGR is done at WM end, they may not be communicated back to ERP. But WM generates PGI/PGR IDOCs which can always be reprocessed at WM end to resend them to ERP so that Inventory levels are accurate.
    Hope that helps

  • Waveburner;  a few Questions regarding track files and Session Data

    After a bit of negotiating, I'm almost ready to burn. Was having problems with file locations and discovered that i had multiple files in different locations. Those have been eliminated and all relative track files are in one place now with the Song Data File as well.
    I then re-imported the individual aif tracks only to find that all of my fades and edits are GONE. It appears that I may have to DO THEM ALL OVER AGAIN! Please tell me that there is a work around.
    Is it possible to import only the Session Data related to the fades and edits(everything but the actual audio files), so as to avoid all this "do-again" work?
    I was also wonder if it is necessary, or perhaps a good idea, to change the File INFO for each of the individual audio track files from "OpenWith" iTunes (default setting) to "Open With": WAVEBURNER ?. (selectable on the aiff files, "Show More Info" window
    Currently the aif files are set to "OpenWith" iTunes (default)
    One last question please.
    Is Waveburner really up to snuff? How many people are using this for Mastering and Burning CD's? I'm about to start inserting some AU Mastering Plug Ins and I'm hoping for the best. Any other suggestions are greatly appreciated.
    G5 Dual 2.0/PBook G41.5Ghz/LogicPro7 Live5 Reason3.0 PansncDA7 TascamFW1804   Mac OS X (10.4.7)  

    You're grammer isn't bad jord, it was I who asked a plethora of questions under one Subject heading.
    When i open the project file(.wb3),
    The prompt says;
    "Please choose a replacement from the list below:"
    /Volumes/320GB HD/Users/ahuihou/.Trash/1 Track 01.aiff
    /Volumes/320GB HD/Users/ahuihou/.Trash/2 Track 02.aiff
    /Volumes/320GB HD/Users/ahuihou/.Trash/3 Track 03.aiff
    /Volumes/320GB HD/Users/ahuihou/.Trash/4 Track 04.aiff
    /Volumes/320GB HD/Users/ahuihou/.Trash/6 Track 06.aiff
    As you can see the files are in the trash.
    The first problem is that there are no actual files in the trash. Just an icon of a CD Disc which was dragged there to eject it, It is no longer in the disc drive/tray. Perhaps i should put the disc back in the drive and then update/replace the files afterwords. (The CD is scratched.)
    The strange thing is that i can still preview the track that's in the trash by selecting More Info and playing it on the little Quicktime player bar. I guess the file is in a cache somewhere?
    I've looked everywhere on all drives for the specific files but can not find them anywhere.
    In the Replacement prompt there is a place that I can check to "Search in the same folder for subsequent files" button on the "Replacement" prompt.
    which "same folder" is it refering to?
    The Trash folder where the old files are or the Folder where the actual .wb3 project file is? I do have all of the correctly named song files/regions in the same folder with the project file.
    maybe i should just start again. i'm not one to give up easy though and would much prefer to "beat" the computer at the game.

  • Questions regarding Email Marketing and Campaign Management

    i am facing some problem is using Email marketing and campaign module of CRM On Demand. Need help in solving few queries.
    1. I am trying to create the email template and save it for future purpose. I am using fields data column to make email personalize automatically. Problem i am facing is when ever i am opening this template for using it again for another campaign these dynamix fields doesn't come. ONlyu the static text xomes.
    2. Second, how can i get the status of email delivered, read etc.
    3. And in last, what ever email i am sending, how can i attach them with the receipient (Contact) record.

    1 - ?
    2 - email receipt status is automatic by Email marketing. You should see it in the Campaign Detail - section Recipients
    3 - Campaign Detail - section Recipients > You can insert Contacts manually or via Data Import or via Segmentation Wizard.
    Good Luck
    BExpert, Brazil
    Siebel & OBI Consulting and training

  • A few questions regarding BorderLayout, JTabbedPane and JFrame.

    I'm after a little help. I want to know the following:
    How to you add a gap on the far left and far right so that the components at PAGE_START and PAGE_END when using BorderLayout have visible borders. I have tried the Constructor which lets you specific hGap and vGap but this does not work, I assume it is only when butting components together.
    When using JTabbedPanes with option
    setTabLayoutPolicy(JTabbedPane.SCROLL_TAB_LAYOUT );is there a way to control painting of the Scroller which scrolls through the tabs? I am currently using a custom UI (subclassing BasicTabbedPaneUI) to paint my tabs however I can not work out how to paint the Scroller.
    How to I add a custom JFrame Border and remove the blue XP border? Do I need to setUndectored and add my own Icons? I want to achieve something along the lines of what you can see here
    I will be using a custom L&F although not Substance and currently my L&F does not paint the border/Decorations on the Frame.
    Here is a picture of my app, outlining my problems.
    A nudge in the right direction on any of these would be great.

    I'm after a little help. I want to know the
    How to you add a gap on the far left and far right so
    that the components at PAGE_START and PAGE_END when
    using BorderLayout have visible borders. I have
    tried the Constructor which lets you specific hGap
    and vGap but this does not work, I assume it is only
    when butting components together. agree vgap and hgap increase the vertical and horizontal distances between objects added to the panel that uses border layout.
    Why not do setBorder(BorderFactory.createEmptyBorder(.....) to do this for you?

  • Few questions regarding requirements in context of SAP products

    I have few questions regarding Relational Database, Network Archtecture and Platform Support requirements in context of SAP products. Can someone help by answering the questions, if possible with Yes/No (and short explanation)
    a) Does your system run native to the Oracle 10g RDBMS (RAC) and database tools? If not, please explain the databases and tools supported (Yes/No)
    b) database accept binary-large-objects (BLOBs) and be referenced via the relational engine (Yes/No)
    c) standard pre-defined SQL queries and related calculations provided for use with industry standard reporting tools
    d) Deployable without using any fixed IP addresses (taking advantage of DHCP address resolution) (Yes/No)
    d)software supported on HP-UX 11.i V2 (r6) on Itanium. (Yes/No)
    e) Software supported on OS clustered servers (If mutliple products, please indicate if all are support or list areas where clustering may not be recommended and why) (Yes/No)
    Thank you!
    A. Henke

    Hi Axel,
    I've just found your question by accident and would like to know whether you have already implemented 10gRAC in SAP environment?

  • Hi, I want to downgrade from OSX LEOPARD to OSX TIGER but I have a few questions regarding this. My iMac is originally from 2007 it came preloaded with tiger. I have original install tiger discs version 10.4.10. Is it safe to downgrade or not please help

    Hi, I want to downgrade from OSX LEOPARD to OSX TIGER but I have a few questions regarding this. My iMac is originally from Sep 2007 it came preloaded with tiger. I have original install (2) tiger discs version 10.4.10.  I want to know if it is safe and what are the necessary steps to do so. Also by downgrading im wondering if a lot of apps nowadays support tiger for example I have photoshop version 5 and 4 these are very important to me. One last question does anyone know of any reliable virus protection for mac that doesnt slow down your computer? because I have read that a lot of them do so. If anyone can help me I would greatly appreciate it! Here are the specs for my iMac 
    Model Name:
      Model Identifier:
      Processor Name:
    Intel Core 2 Duo
      Processor Speed:
    2 GHz
      Number Of Processors:
      Total Number Of Cores:
      L2 Cache:
    4 MB
    2 GB
      Bus Speed:
    800 MHz

    Most of the time a perception of general slow performance is the result of installing third party junk alleged to speed up, "clean" or "optimize" your Mac, or to look for viruses that don't exist. Ideally you would know what you installed so you can uninstall it, but if you don't know or aren't sure there are techniques such as Safe Mode and creating a temporary user account to confirm that suspicion.
    If you open Activity Monitor it may show a process, or processes, that occupy a lot of your system's time.
    Slowness confined solely to web browser activity is often the result of an inexorable progress toward websites that demand ever more processor-intensive tasks. If your slow performance is strictly limited to web browsing, you might try disabling Flash by either uninstalling it, or use utilities such as ClickToFlash that allow you to control what Flash content gets loaded. Flash in itself is not inherently evil, but there is nothing to stop websites or the advertisers who pay for them from writing horrible Flash code that can do everything from hogging 100% of your CPU's time to causing random crashes. You can watch Activity Monitor as in the above to correlate these troublesome web pages with performance degradation.
    You are correct; if your computer shipped with Tiger you may certainly revert to it. I forgot that Tiger was shipping on new Macs as recently as five years ago. To downgrade it would be necessary to completely erase your hard disk and boot with the Tiger installation DVD, followed by installing it anew. Such drastic measures are not necessary and you are unlikely to be satisfied with the results anyway.
    Assuming your system is free of third party parasitic junk attached to OS X in an ill-conceived attempt to improve upon it, that your hard disk drive is sound and the boot volume has enough free space to work with, by far the best performance-enhancing improvement would be to add more memory. Buy as much as your computer can use and that you can afford. 2 GB is not that much any more.
    Read the following for some recommended troubleshooting techniques from Apple:
    General purpose Mac troubleshooting guide: Isolating issues in Mac OS X
    Creating a temporary user to isolate user-specific problems: Isolating an issue by using another user account
    Memory limitations: Using Activity Monitor to read System Memory and determine how much RAM is being used
    Identifying resource hogs and other tips: Runaway applications can shorten battery runtime
    Starting the computer in "safe mode": Mac OS X: What is Safe Boot, Safe Mode?

  • Oracle Identity and Access Management Suite Plus Integration with Oracle ADF

    Hi All,
    Kindly advice if Oracle Identity and Access Management Suite Plus can be integrated with Oracle ADF based applications to manage the end-to-end lifecycle of user accounts specifically addressing to roles/priviledges and security.
    Request you to share links to documentation where I can study the steps to integrate both the frameworks.
    Looking forward to hear from you soon.
    Best Regards,
    Ankit Gupta 

    Hi Sébastien,
    I came across the below link for the required integrations -
    Oracle® Fusion Middleware Installation Guide for Oracle Identity and Access Management 11g Release 2 (11.1.2) - …
    Oracle® Fusion Middleware Enterprise Deployment Guide for Oracle Identity Management 11g Release 2 (11.1.2) - Co…
    Best Regards,
    Ankit Gupta

  • Question regarding the "mcxquery" and "dscl -mcxread" commands:

    Question regarding the mcxquery and dscl -mcxread commands:
    Does anyone know why the mcxquery and the dscl . -mcxread commands don't show any info about MCX managed login items & printers? The System Profiler's "Managed Client" section does. Id like to see info regarding managed printers and managed login items using the mcx tools. I have Mac users running 10.5.2 with both login items and printers that are pushed out to them via MCX. The System Profiler app shows all of their policies, but the dscl . -mcxread and mcxquery tools dont. Why not?
    Message was edited by: Daniel Stranathan

    How do you "call procedures/functions" without sql code? You need at least the call statement like
    {call myProc(?,?,?)}that you wrap into a CallableStatement.
    Other than that: when you switch off autocommit, you need to call commit/rollback at the end. Usually, if you don't commit/rollback a non-autocommitted connection, the transaction get's committed/rollbacked when you close the connection - that depends on the JDBC driver. But it's never a good idea to ommit the commit/rollback calls on a non-autocommit connection. Usually you enclose your code in a try/catch block like this:
    try {
    } catch (Exception e) {
    } finally {
        con.setAutocommit(true); //or:

  • How to Integrate Oracle Imaging and Process Management(IPM) 7.7.10 with EBS

    Hi All,
    We are implementing the following modules from Oracle Content Management to one of our Client, the following are the versions of the tools:
    Configure and deploy Oracle Forms Recognition (OFR) 10GR3
    Configure the Oracle Adopter for integration of OFR with EBS Version
    Configure the Adopter for integration of OFR with Oracle Imaging and Process Management (IPM) 7.7.10
    I really like to have any technical design document on integrations front, especially from OFR -> EBS and also IPM -> EBS.
    Please feel reach me on my following contact details:
    [email protected]
    Phone: 1865-582-2369
    Mobile: 1865-202-6430
    Any pointers for the same is well appreciated.

    Try replacing the .dll file with the one in your WINDOWS directory. I had that problem and I copied the .dll from C:/WINDOWS/system32 to overwrite the one located in the install directory.

  • Few questions regarding nokia N900

    I have a few questions regarding n900:
    1- is there different versions of this phone for different regions? for example asia, middle east, europe.. etc. and if there is can i order a different version from nokiausa website?
    2- is the warranty international? even if i get the additional 1 year warranty?
    thank you 
    Go to Solution.

    Hi,can you help shatter some light for me?
    I would like to know if NOKIA planing to release the N900 anytime soon to ASIA and ASIA - Pacific region? I can't find any information regarding N900 on any Asia Pacific region sites. China, Hong Kong, malaysia, Singapore, Phillipines, India, Thailand, Australia. Nothing is found. There are only about 8 Selected regions right now. But Would I would love to know if there by any chance it will be release else where before this Christmas Season.
    I live in New Zealand, but I know that this phone will never going to be in NZ until sometimes next year or maybe never. I would love to buy this phone by any mean. So I'm planing to get it from Asia during my visit there next month.
    Please help clearing this for me.
    2B || !2B N900 1S TH3 F0N3 4 M3
    Please Kudos! me. To show your Appreciation

  • Oracle Lease and Finanace Management

    Please let me know if the Oracle Finanace and Lease Management module be implemented for a lessee in order to manage their leases.
    My client is a car rental company who leases vehicles from the Toyota Finance. There are about 500-600 leases at a given time.
    We tried to use the lease management funaciotnality within the Oracle Fixed Assets. However there a limitations when using the fixed assets module to manage the leases. These are such as being unable to update the lease contracts which are in use, not being able to pay out a lease before the end of the lease and there's no facility to upload the leases without having to create them one by one etc.
    Can someone please let me know if the Oracle Lease and Finanace Management can be used to manage the leases for this company ( Who is a lessee ) .
    And also please let me know the other options available.
    Thanks and Regards,

    Please see (Note: 811550.1 - How to upgrade WAM on FRS (Form and Report Server, Resin) environment to Full OAS (Oracle Application Server 10g Release 2, non-Resin) environment).
    You may also review these docs.
    Note: 942124.1 - What are the OAS patches need to be applied before upgrading the WAM patch
    Note: 850133.1 - Oracle Utilities Work Asset Management v1.8.1

  • A few questions about the ka790gx and dka790gx

    i have a few questions about the ka790gx and dka790gx , how much better is the dka790gx compaired to the ka790gx ? . how much difference does the ACC function make to overclocking etc , i plan on getting a phenom II 940BE or 720BE . i already have the ka790gx so would it be worth building another system using the dka790gx mobo , or should i keep what i already have and just change the cpu ?

    It's largely irrelevant what other boards had VRM issues other than the KA790GX - the fact is it died at stock settings. Since there is little cost difference between the more robust DKA790GX (or Platinum if you really need 1394) why bother with the proven weakling? There are other examples around of the KA not having a robust power section.  There's no way I would use even a 95W TDP CPU in the KA and absolutely not O/C.....!
    As for the credentials of Custom PC, I have generally found their reviews accurate and balanced, and echo my own findings where applicable. If a little too infrequent.
    The fact that the KA has such a huge VRM heatsink leads me to my other comments on the Forum, particularly regarding the "fudge" aspect:
    """Henry is spot on - the notion that adding a heatsink to the top of the D2PAK or whatever MOSFETS is effective is virtually worthless. The device's die thermal junction is the tab on the device back - which is always against the PCB pad. The majority of heat is therefore dissipated in to the board, and the fact that the epoxy plastic encapsulation gets hot is simply due to the inability of the heat to be conducted away from the device die via the tab. Not sure when Epoxy become an effective conductor of heat.... Good practice is to increase the size of the PCB pad (or "land" in American) such that the enlarged PCB copper area acts as an adequate heatsink. This is still not as effective as clamping a power device tab to an actual piece of ali or copper, but since the devices used are SMD devices, this is not possible. However, the surface area required to provide sufficient PCB copper area to act as a heatsink for several devices isn't available in the current motherboard layouts. Where industrial SBC designs differ in this respect is to place the VRM MOSFETs on the back of the PCB on very enlarged PCB pads - where real estate for components is not an issue.
    Gigabyte's UD3 2oz copper mainboards sound like a good idea, on the face of it. However, without knowing how they have connected the device tabs to where and what remains a mystery. I suspect it is more hype than solution, although there will be some positive effect. From an electrical perspective, having lower resistance connecting whatever to whatever (probably just a 0V plane) is no bad thing.
    The way the likes of ASUS sort of get round the problem is to increase the sheer number of MOSFET devices and effectively spread the heat dissipation over a larger physical area. This works to a degree, there is the same amount of heat being dissipated, but over several more square inches. The other advantage of this is that each leg of the VRM circuit passes less current and therefore localised heat is reduced. Remember that as well as absolute peak operating temperature causing reduced component life, thermal cycling stresses the mechanical aspects of components (die wire bonds for example) as well as the solder joints on the board. Keeping components at a relatively constant temperature, even if this is high (but within operating temperature limits), is a means of promoting longevity.
    For myself, the first thing I do with a seperate VRM heatsink is take it off and use a quiet fan to blow air on to the VRM area of the PCB - this is where the heat is. This has the added benefit of actively cooling the inductors and capacitors too....
    Cooling the epoxy component body is a fudge. If the epoxy (and thus any heatsink plonked on top of it) is running at 60C, the component die is way above that.....
    It's better than nothing, but only just."""

  • Quick question regarding best practice and dedicating NIC's for traffic seperation.

    Hi all,
    I have a quick question regarding best practice and dedicating NIC's for traffic seperation for FT, NFS, ISCSI, VM traffic etc.  I get that its best practice to try and separate traffic where you can and especially for things like FT however I just wondered if there was a preferred method to achieving this.  What I mean is ...
    -     Is it OK to have everything on one switch but set each respective portgroup to having a primary and failover NIC i.e FT, ISCSI and all the others failover (this would sort of give you a backup in situations where you have limited physical NICs.
    -    Or should I always aim to separate things entirely with their own respective NICs and their own respective switches?
    During the VCAP exam for example (not knowing in advance how many physical NIC's will be available to me) how would I know which stuff I should segregate on its own separate switch?  Is there some sort of ranking order of priority /importance?  FT for example I would rather not stick on its own dedicated switch if I could only afford to give it a single NICs since this to me seems like a failover risk.

    I know the answer to this probably depends on however many physical NICs you have at your disposal however I wondered if there are any golden 100% rules for example FT must absolutely be on its own switch with its own NICs even at the expence of reduced resiliency should the absolute worst happen?  Obviously I know its also best practice to seperate NICs by vender and hosts by chassis and switch etc 

Maybe you are looking for

  • How do you change the weather temperature from Celsius to fahrenheit?

    Hi my name is Paul, gotta say that the "iPad Mini" is one of the best apple device's in the history of apple. But theres something now working right.. Every time i ask siri something about the weather temperature, siri tells me in "Celsius not Fahren

  • Flood of "TLS connection exception: handshake incomplete"

    Good day every body! I am using 4215 IPS-K9-6.0-4a-E1 image. Recently our sensor started to generate a lot of errors like that (when connected by IDM): evError: eventId=1208572151825393108 severity=error vendor=Cisco originator: hostId: sens-1 appNam

  • Query Build - witch cube does measures comes from?

    Hello! It is not possible to see witch cube a measure comes from in the Query Build. I have several measures with the same name but from different Cubes / Analytic Workspaces. If I change the Label, then the measure will have that name in the report

  • Preprinted letter for intrastat

    HI Experts, can you tell me the name of standard preprinted letter  for intrastat (MM part)? I'm trying to print it out but without succes ;-( I am also trying to save intrastat on my PC. I go through meis transaction. System gives me information tha

  • Firefox opens tabs after I have shut down and reopen

    Each time I open Firefox, the program opens multiple tabs that I had searched and reviewed a couple months ago. I have attempted to properly log off Firefox. I have also uninstalled the Firefox program and all its components and then reinstalled the