Few questions regarding requirements in context of SAP products

Hello!
I have few questions regarding Relational Database, Network Archtecture and Platform Support requirements in context of SAP products. Can someone help by answering the questions, if possible with Yes/No (and short explanation)
a) Does your system run native to the Oracle 10g RDBMS (RAC) and database tools? If not, please explain the databases and tools supported (Yes/No)
b) database accept binary-large-objects (BLOBs) and be referenced via the relational engine (Yes/No)
c) standard pre-defined SQL queries and related calculations provided for use with industry standard reporting tools
d) Deployable without using any fixed IP addresses (taking advantage of DHCP address resolution) (Yes/No)
d)software supported on HP-UX 11.i V2 (r6) on Itanium. (Yes/No)
e) Software supported on OS clustered servers (If mutliple products, please indicate if all are support or list areas where clustering may not be recommended and why) (Yes/No)
Thank you!
Regards
A. Henke

Hi Axel,
I've just found your question by accident and would like to know whether you have already implemented 10gRAC in SAP environment?
regards
Barthez

Similar Messages

  • Some question regarding requirements in context of SAP XI

    Hello!
    I have few questions regarding Relational Database,  Network Archtecture and Platform Support requirements in context of SAP XI. Can someone help by answering the questions, if possible with Yes/No (and short explanation)
    <b>a) Does your system run native to the Oracle 10g RDBMS (RAC) and database tools?  If not, please explain the databases and tools supported (Yes/No)
    b) database accept binary-large-objects (BLOBs) and  be referenced via the relational engine (Yes/No)
    c) Deployable without using any fixed IP addresses (taking advantage of DHCP address resolution) (Yes/No)
    d)software supported on HP-UX 11.i V2 (r6) on Itanium. (Yes/No)
    e) Software supported on OS clustered servers  (If mutliple products, please indicate if all are support or list areas where clustering may not be recommended and why) (Yes/No)</b>
    Thank you very much!
    Regards
    A. Henke

    Hi Axel,
    I've just found your question by accident and would like to know whether you have already implemented 10gRAC in SAP environment?
    regards
    Barthez

  • Few questions regarding the "Update CMS" button

    Hello,
    Few questions regarding the "Update CMS" button:
    1. When I create new product at the SLD I see it at the add SC table even if I don't click the "Update CMS" button first. If so, when will I use this option?
    2. When I do click the "Update CMS" button it takes it between 30-40 minutes to finish the update. During this time frame the whole development portal (it is sitting on the same WAS as the NWDI) becomes extremely slow. Is this normal response time or do I have a certain performance problem with my server?
    Thank you in advance,
    Roy

    Hello Roy,
    I think that <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/46/6fe3ec58f0477a816b80f182b389e0/frameset.htm">this</a> topic should answer all your questions :).
    Hope that helps!
    Jordan

  • Hi, I want to downgrade from OSX LEOPARD to OSX TIGER but I have a few questions regarding this. My iMac is originally from 2007 it came preloaded with tiger. I have original install tiger discs version 10.4.10. Is it safe to downgrade or not please help

    Hi, I want to downgrade from OSX LEOPARD to OSX TIGER but I have a few questions regarding this. My iMac is originally from Sep 2007 it came preloaded with tiger. I have original install (2) tiger discs version 10.4.10.  I want to know if it is safe and what are the necessary steps to do so. Also by downgrading im wondering if a lot of apps nowadays support tiger for example I have photoshop version 5 and 4 these are very important to me. One last question does anyone know of any reliable virus protection for mac that doesnt slow down your computer? because I have read that a lot of them do so. If anyone can help me I would greatly appreciate it! Here are the specs for my iMac 
    Model Name:
    iMac
      Model Identifier:
    iMac7,1
      Processor Name:
    Intel Core 2 Duo
      Processor Speed:
    2 GHz
      Number Of Processors:
    1
      Total Number Of Cores:
    2
      L2 Cache:
    4 MB
      Memory:
    2 GB
      Bus Speed:
    800 MHz

    Most of the time a perception of general slow performance is the result of installing third party junk alleged to speed up, "clean" or "optimize" your Mac, or to look for viruses that don't exist. Ideally you would know what you installed so you can uninstall it, but if you don't know or aren't sure there are techniques such as Safe Mode and creating a temporary user account to confirm that suspicion.
    If you open Activity Monitor it may show a process, or processes, that occupy a lot of your system's time.
    Slowness confined solely to web browser activity is often the result of an inexorable progress toward websites that demand ever more processor-intensive tasks. If your slow performance is strictly limited to web browsing, you might try disabling Flash by either uninstalling it, or use utilities such as ClickToFlash that allow you to control what Flash content gets loaded. Flash in itself is not inherently evil, but there is nothing to stop websites or the advertisers who pay for them from writing horrible Flash code that can do everything from hogging 100% of your CPU's time to causing random crashes. You can watch Activity Monitor as in the above to correlate these troublesome web pages with performance degradation.
    You are correct; if your computer shipped with Tiger you may certainly revert to it. I forgot that Tiger was shipping on new Macs as recently as five years ago. To downgrade it would be necessary to completely erase your hard disk and boot with the Tiger installation DVD, followed by installing it anew. Such drastic measures are not necessary and you are unlikely to be satisfied with the results anyway.
    Assuming your system is free of third party parasitic junk attached to OS X in an ill-conceived attempt to improve upon it, that your hard disk drive is sound and the boot volume has enough free space to work with, by far the best performance-enhancing improvement would be to add more memory. Buy as much as your computer can use and that you can afford. 2 GB is not that much any more.
    Read the following for some recommended troubleshooting techniques from Apple:
    General purpose Mac troubleshooting guide: Isolating issues in Mac OS X
    Creating a temporary user to isolate user-specific problems: Isolating an issue by using another user account
    Memory limitations: Using Activity Monitor to read System Memory and determine how much RAM is being used
    Identifying resource hogs and other tips: Runaway applications can shorten battery runtime
    Starting the computer in "safe mode": Mac OS X: What is Safe Boot, Safe Mode?

  • Few questions regarding nokia N900

    Hi,
    I have a few questions regarding n900:
    1- is there different versions of this phone for different regions? for example asia, middle east, europe.. etc. and if there is can i order a different version from nokiausa website?
    2- is the warranty international? even if i get the additional 1 year warranty?
    thank you 
    Solved!
    Go to Solution.

    Hi,can you help shatter some light for me?
    I would like to know if NOKIA planing to release the N900 anytime soon to ASIA and ASIA - Pacific region? I can't find any information regarding N900 on any Asia Pacific region sites. China, Hong Kong, malaysia, Singapore, Phillipines, India, Thailand, Australia. Nothing is found. There are only about 8 Selected regions right now. But Would I would love to know if there by any chance it will be release else where before this Christmas Season.
    I live in New Zealand, but I know that this phone will never going to be in NZ until sometimes next year or maybe never. I would love to buy this phone by any mean. So I'm planing to get it from Asia during my visit there next month.
    Please help clearing this for me.
    2B || !2B N900 1S TH3 F0N3 4 M3
    Please Kudos! me. To show your Appreciation

  • A few questions regarding SAP EWM and WM

    Hello,
    I have a few general questions regarding the differences between EWM and WM:
    1) What are the benefits of EWM-MFS compared to WM + TRM (especially in terms of SPS)?
    2) The Quality Inspection Engine (QIE) can also be used by SAP WM, right?
    3) There is RFID-support in EWM, so EWM is able to communicate directly with SAP Auto-ID, right?
         But I have heard that SAP PI is necessary in some cases, when and why?
    4) Is there something new in EWM regarding goods receipt processing?
        I have read that the splitting of inbound delivery items is possible in EWM in case of missing inbound delivery items. Is this really  a new feature?
    5) EWM can easily be connected to SAP BW for reporting purposes, what about WM?
    6) What about scalability if the warehouse grows?
    7) Is there any information about the costs of using EWM compared to WM and vice versa?
    I appreciate any kind of help.
    Thank you.
    Dennis

    Hi,
    1. What does SAP offer as a product for dWM? Is it a u201Cspecialu201D installation of the SAP framework dedicated to WM or is it a standard ECC box where only the WM module is used?
    There are two version of DWM. One is Decentralized WM as a part of ECC and another one is EWM as a part of SCM. Both are decentralized.
    2. My understanding is that the interfaces between ERP and dWM can support some non-real time operations (like when the main ERP system is down, the dWM can still perform some operations). Considering that the transactional interfaces are based on BAPIs, how does SAP achieve this interfacing in non-real time environments? I am thinking you can complete the different processing unless both systems are up
    When it comes to interfaces, DWM needs Deliveries from ERP. That's it, WM can function from there independent of ERP system. But, WM defenitely needs to communicate back PGI and PGR and other posting changes . So, in case ERP is down, even though PGI / PGR is done at WM end, they may not be communicated back to ERP. But WM generates PGI/PGR IDOCs which can always be reprocessed at WM end to resend them to ERP so that Inventory levels are accurate.
    Hope that helps
    Thanks
    Vinod.

  • Question regarding IWDTree and context Value Node naming

    Hi,
    I have a question regarding the IWDTree / IWDTreeNodeType components.
    I have a context looking like this:
    Context
      + ResponseNode
        + PersonNode (1..1)
          + PersonAddressNode                    (empty node, placeholder)
          | + AdresNode (0..n)
          + PersonChildNode                      (empty node, placeholder)
          | + PersonNode (0..n)
          |   + PersonAddressNode                (empty node, placeholder)
          |     + AddressNode (0..n)
          + PersonParentsNode                    (empty node, placeholder)
            + PersonNode (0..n)
              + PersonAddressNode                (empty node, placeholder)
                + AddressNode (0..n)
    The context represents a person, a person's address, and a person's children and parents with their respective addresses.
    As a result, on different branches, a PersonNode and AddressNode can appear.
    And for some strange reason, all PersonNodes and AddressNodes link to the same ResponseNode.PersonNode.PersonParentsNode.PersonNode and ResponseNode.PersonNode.PersonParentsNode.PersonNode.PersonAddressNode.AddressNode respectively, irregardless of their branch...
    Is it illegal to have multiple PersonNode and AddressNode node names, and should they be named uniquely?

    Generally, node names need to be unique inside the context, attributes in different nodes can have same names. I wonder if the context structure you described will result in code without compile errors.
    The WD Tree can only be used with recursive context nodes or with a hierarchy of non-singleton child nodes.
    Can you give an example how your tree should look like at runtime?

  • A few questions regarding my Z10

    Still a new user, new to smartphones too,  can't find time to sit with it very much lately...
    Here are a few questions I have:
    On recharging the phone after I upgraded the OS,  when it was I believe turned off -- I don't think it was on --  I never noticed the green LED that I noticed sometimes while recharging before I upgraded to the latest OS -- it just never seemed to come on green I presume to show a full battery  when I was charging.  Yesterday it did, and I believe my phone was "off"  -- what's the story on that?  Does it just stay on green a short while, then go off? Why sometimes orange/white I think it was, for quite some time, even when it should have been recharged?  I was glad to notice the green yesterday.
    I had the Bell store put in the largest of the media cards, and now I want to load up some apps, not junk, I'm not a kid, just solid ones,  and am not sure how to do that...  ahem.  I know.  I would like to pick up the Globe and Mail news one and the CBC news one unless it's already on there, will check on that, to start, and maybe some other which is recommended.  Can I do this over the household WiFi without turning the carrier date access on?  Or can I do it via my laptop -- I did put BlackBerry Link on the computer [actually the Bell tech did at the Bell store] and I have not attempted to use that yet in any way.  Can someone point me to online instructions on this or give me a step-by-step procedure?  I am still "new" as a user... 
    I would search around myself but have to get a garden set up finished...   perhaps someone has a quick pointer or answer...
    Solved!
    Go to Solution.

    Apps:
    Select the 'Blackberry World' icon
    If this is your first time, you may have to register and create a blackberry id, follow the instructions.
    select the little magnifying glass icon (search)
    Type 'cbc' in the search bar
    You'll see the various CBC apps.
    Select one that you want to look at, select the green 'DOWNLOAD' button
    Repeat as required for other apps.
    Paid apps will most likely be automatically billed thru your BELL account.
    To find the apps after they install, exit BB world.
    from the home page, swipe left to see more pages. Newly installed apps will appear on the last page.
    Globe News, CBC news, CBC radio, National Geographic, TuneIn Radio, Recipe Box, Native Level, Easy Level, NFB, CBC Hockey Night, CBC Music, CIBC Banking, POYNT, Flashlight LED are all free and very good.
    Skype is free, but not great yet.
    If you're on wifi, all the downloads will use wifi data.
    Most apps are pretty small and don't eat up a lot of your data plan, even if you download over wireless.

  • A few questions regarding my new iPhone

    A few questions:
    1. I notice that if I am browsing a second page on my browser for about a minute and then navigate back to my first page... it's "blanked out" and am forced to refresh. Is this normal? Any way around this? Not particularly useful when on Meebo or when I'm trying to compare movie time on two different movie theatres.
    2. Is there any way to save images from a site or from an email to my phone? I know I can't receive MMS so I thought I'd email me a picture to add it to my contacts and couldn't find a way. I also browsed online for an image and couldn't save it nor add it to a contact either. Any way to do this? I had to wait to get home and sync the images to my phone.
    3. I noticed that the iPhone's connector is the same as my iPod's connector, but if I plug it into my iPod's dock, a warning comes up that warns me it's not designed for the iPhone. Will I harm my iPhone if I plug it into my car charger, wall charger, dock that's AVed into my TV? I'm just really worried that it'll screw my phone up.
    4. I read somehwere I can open PDF's on my iPhone. Can I save a PDF to my phone and open it somehow?
    Thanks!!

    1. I notice that if I am browsing a second page on my browser for about a minute and then navigate back to my first page... it's "blanked out" and am forced to refresh. Is this normal? Any way around this? Not particularly useful when on Meebo or when I'm trying to compare movie time on two different movie theatres.
    This is normal - in my experience anyway but not with all websites. It doesn't do the same when I have one page open on these discussions, navigate to another page and then back, the discussions page I had opened is not refreshed.
    2. Is there any way to save images from a site or from an email to my phone? I know I can't receive MMS so I thought I'd email me a picture to add it to my contacts and couldn't find a way. I also browsed online for an image and couldn't save it nor add it to a contact either. Any way to do this? I had to wait to get home and sync the images to my phone.
    Not supported from a website or from a received messages. You must do as provided with your last sentence - at the present time anyway.
    3. I noticed that the iPhone's connector is the same as my iPod's connector, but if I plug it into my iPod's dock, a warning comes up that warns me it's not designed for the iPhone. Will I harm my iPhone if I plug it into my car charger, wall charger, dock that's AVed into my TV? I'm just really worried that it'll screw my phone up.
    If you get this warning you shouldn't ignore it. Even though the connection type might be the same, if the device is not compatible with the iPhone it can cause problems or potential damage. There are auto chargers that specifically indicated - made for or compatible with the iPhone. I purchased a car charger that is compatible with my iPhone and with my iPod with video.
    You can alway check with the manufacturer of the device to determine if the device is also compatible with the iPhone regardless the warning but this should be in writing via their website or provided via email.
    4. I read somehwere I can open PDF's on my iPhone. Can I save a PDF to my phone and open it somehow?
    You can view PDF, Word and Excel documents attached to a received email from within the received message but you can't save the attachments outside of the message.

  • Few questions regarding Oracle Scorecard and strategy management.

    Hi,
    I have following questions regarding Oracle Scorecard and strategy management:
    1. What are the ways in which i can show status of a KPI, like we have colors and symbols, what are others?
    2. can we keep log of KPIs, store them, keep report of feedback/action taken on that?
    3. Does Scorecard and strategy management have ability to retain history on feedback and log of
    entries i.e. date/time, user name?
    4. Does Scorecard and strategy management have ability to use common mathematical formulas e.g. median, average, percentiles. Describe.?
    Thanks in advance for your help.

    bump.

  • A few questions regarding the configuration of Adobe Document Services

    <u><i>For Your Information: the main questions are repeated at the end of this post.</i></u>
    The Adobe Document Services seems to work fine. The test I did on http://<server>:<port>/AdobeDocumentServices/Config gives the error
    ' "Required stream: "PDFDocument" not found.” ' so that's fine.
    But when I do this: http://server:50000/webdynpro/dispatcher/local/TutWD_OnlineInteractiveForm/OnlineInteractiveFormApp
    The result: the PDF is shown and I can enter text in the textboxes and also use the radioboxes.
    But I can't use the dropdownboxes, neither can I use the "submit" and "check" buttons..
    Is this normal? Or is it because of the ReaderRights credential?
    Or is it necessary to install the ACF?
    Here is some info I got from a blog:
    "<b>Client Side Requirements</b>
    Follow the steps mentioned below. Please make sure the following prerequisites are met before working with Adobe Interactive Forms.
    NWDS 7.0 / 6.0
    Adobe Live cycle designer 7.1 / 7.0
    Adobe Reader 7.0.8 [ Minimum : 7.0.1]
    <b>End User Requirements</b>
    Adobe Reader 7.0.8 [ Minimum : 7.0.1]
    Active Component Framework (ACF) - SPS 9, SPS 10"
    Two more questions;
    1)This info is in the config guide:
    "If you have installed the ADS and the WD runtime environment on different J2EE engines and if the communication between these engines uses the SLD, you need to publish the ADS to the SLD."
    Does this mean that I don't need to do this when I haven't used SLD? Or is it necessary to install SLD?
    Some more info:
    Prerequisites:
    A System Landscape Dir must already have been configured.
    If you have not yet done so, perform the necessary activities according to the documentation SAP System Landscape Directory, Administrative Activities section, chapters:
    Start and stop the SLD Service
    Configure the SLD Server
    Configure data persistence
    Make settings for the SLD bridge
    You can find this documentation by calling the following URL in your web
    browser: http://<host>:<port>/sld
    When I check this URL, I don't see anything concerning an (already configured) SLD.
    2) Do I need the license below too to develop in AIF?
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bc_srv/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d373530373834%7d
    Main questions----
    I need to create a form with a few fields (of which some fields are mandatory); then I have to use a few BAPI's to check these fields and to save the content in a CRM system.
    I've installed Netweaver Sneak Preview, and configured Adobe Document Services (made ADSUser & ADSCaller, set IIOP etc to Autostart, Installed the credentials). The tests seem to work fine, but I haven't developed anything yet.
    My questions:
    1)Is it necessary to install the ACF?
    2)Is it necessary to install Adobe LifeCycle Designer?
    3)Also SLD?
    4)Also the license described above?
    Grz
    Allan
    Message was edited by:
            Allan Duinslaeger

    No one?
    Some questions are answered by someone else.
    -The SLD is okay, it doesn't need to be configured
    -The Adobe Lifecycle Designer is automatically installed when installing the Netweaver Studio Sneak Preview SP16
    Just two more questions:
    1)when I open http://server:port/webdynpro/dispatcher/local/TutWD_OnlineInteractiveForm/OnlineInteractiveFormApp
    The PDF is shown but I can't use the buttons or the dropdown boxes.
    I tried to install ACF but I have NW04s SP16, and the ACF is only SP11.
    So when I install that, it only shows a blue screen with "I am the placeholder control"
    When I install ACF SP19 for NW04, the PDF shows again, but I still can't use the buttons or dropdowns. Is this normal?
    2) Do I need the license described below?
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bc_srv/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d373530373834%7d
    Main questions----
    I need to create a form with a few fields (of which some fields are mandatory); then I have to use a few BAPI's to check these fields and to save the content in a CRM system.
    I've installed Netweaver Sneak Preview, and configured Adobe Document Services (made ADSUser & ADSCaller, set IIOP etc to Autostart, Installed the credentials). The tests seem to work fine, but I haven't developed anything yet.
    My questions:
    1) What about the ACF?
    2) Also the license described above?
    Grz
    Allan

  • A few question regarding oracle Vm (and virtualizing Db 11g)

    Hi,
    I've just started evaluating Oracle vm for our next deployment.
    One of the systems I'll need to virtualize is Oracle db 11g. As far as I understand the oracle DB template only comes with ASM? I would prefer to use LVM. What is the best way to install db into virtual machine without asm? Should I start with EL 5.2 and configure it, or could I somehow use the EL that comes with the template?
    Regarding LVM: I'm planning to create different volume groups, each with just one logical volume. These volumes would be mounted to guest as /u01, /u02 ... and so on. All volumes will be created on mirrored disks/partitions. Later, I could just move, expand, strip volumes as db usage will require. Does that sound ok?
    And another question regardin oracle vm: in the manual, chapter 4.6.2 says: "Install an operating system. This may be done a number of ways.
    ■ Install an Oracle VM Server-enabled operating system from CD-ROMs...."
    Is there a list of server-enabled operating systems anywhere? And maybe more detailed explanation of this step?
    Thanks
    Jernej

    Jernej Kase wrote:
    One of the systems I'll need to virtualize is Oracle db 11g. As far as I understand the oracle DB template only comes with ASM? I would prefer to use LVM. What is the best way to install db into virtual machine without asm? Should I start with EL 5.2 and configure it, or could I somehow use the EL that comes with the template?I would probably start with the standard EL5 template instead. The Database template is designed to automatically configure and provision the database with ASM and would probably take longer to dismantle.
    >
    Regarding LVM: I'm planning to create different volume groups, each with just one logical volume. These volumes would be mounted to guest as /u01, /u02 ... and so on. All volumes will be created on mirrored disks/partitions. Later, I could just move, expand, strip volumes as db usage will require. Does that sound ok?It sounds OK, but ASM does all of that and more. It is also faster (particularly on Oracle VM, as it uses direct access to the disks). ASM also does automatic data levelling and striping. With 11g, I would strongly recommand ASM over LVM for your storage.
    Is there a list of server-enabled operating systems anywhere? And maybe more detailed explanation of this step?There isn't a list -- that's possibly badly worded as well. If you don't want to use one of the paravirtualized Oracle Enterprise Linux templates available on eDelivery, you can use any operating system installation CD in ISO format. Note that installations from an ISO are done as fully virtualized guests (i.e. hardware virtualized) and require Intel VT-x or AMD-s extensions to be present and enabled. Hardware virtualized guests are also not as fast as paravirtualized Linux guests.
    Oracle only certifies Database 11g running on Enterprise Linux in paravirtualized mode. The simplest way to deploy this is to use the provided templates.

  • Few questions regarding bw

    1) how can we enter into R/3 directly from BEx?
    2)  How can we do currency conversions in Modelling or Reporting?
    3) can we extract a 120 character field from Legacy system to Reporting in SAP BW ?
    4) What performance tuning you can do with ODS in BW ?

    Hi Kiran,
    Welcome to the SDN! We encourage you to search for the answers to your questions, before posting new threads. The answers to all your questions have been discussed at length in several threads.
    Use this link to search:  https://forums.sdn.sap.com/search!default.jspa?objID=f131
    Hope this helps...

  • About to buy E-72. Had a few questions regarding N...

    I use Vodafone in India. I live in India and frequently travel to Nigeria on business.
    1) I wanted to know if Nokia messaging will work when I go to Nigeria on a different sim/carrier (MTN)?
    2) Does Nokia Messaging just require a data plan or wifi or is it like BIS where it will work on if subscribed to and offered by a particular network/cellular service?
    In other words, can just put in a new sim card which has data/internet/3g data and use nokia messaging be it Nigeria, Dubai or India?
    Thanks

    First setup is to be done using sim data access.
    once setup you can change it to wifi.
    menu>email>settings>select email id>Account setting>account information>access point ( change it to wifi).
    Access point : is internet connectivity from SIM service provider.
    for example in airtel access point is MOBILE OFFICE.
    regards
    http://shailendraraj.blogspot.com
    if this helped u click green star and follow blogspot

  • I have a few questions regarding ADT.

    First, please check my understanding of ADT.
    ADT is a set of specifications which tells how the data is to be operated and structured. Please correct me if I'm wrong.
    Now, here are the questions.
    1. What are the atomic and structured ADT? I was googling around but I couldn't find the information about them anywhere.
    2. what is the difference between the specification and the implementation of an ADT?
    Also, if you have a website which has a detailed information regarding ADT please tell me the website.
    thank you!

    please suggest more websites.Here's 318,000 suggestions:
    http://www.google.com/search?hl=en&q=%22abstract+data+type%22&btnG=Google+Search

Maybe you are looking for

  • How to Create a Cost object for a Rental object in RE-FX

    Dear Friends, We have created one Building and it has been assigned with an Asset Master.When depreciation is posted it is debiting to the Cost Center attached to the asset master. Here the requirement is to allocate the Cost from the Cost Center to

  • Monitoring e-mails in GroupWise 7.0

    I am a district-level administrator with a school district in Arkansas and we notify our employees that e-mails may be monitored for inappropriate use. However, my Technology Director tells me that GroupWise doesn't have this capability because e-mai

  • Problems with getting internet explorer on my mac with virtual box 4.3.20, who can help?

    This is what I did: 1) downloaded and installed virtual box 4.3.20 2) copied curl -s https://raw.githubusercontent.com/xdissent/ievms/master/ievms.sh | IEVMS_VERSIONS="11" bash in the Terminal (for IE 11 only). I got this from the link: Internet Expl

  • CR2 Files to external editor rather than PSD or TIFF

    Hi There, I know that Aperture only supports TIFF and PSD files for external editor transfers, but is there any hope that in future versions you can choose to send the original CR2 file instead? I love Aperture and use it for a lot of things, but whe

  • MS Source Safe Addin?

    I am sure this has been asked a million times already...but does anyone have an add-in for MS Source Safe for Jdeveloper? I would REALLY hate to spend a week or 2 trying to figure out the java doc and write one for myself if someone would be so kind