Few questions regarding the "Update CMS" button

Hello,
Few questions regarding the "Update CMS" button:
1. When I create new product at the SLD I see it at the add SC table even if I don't click the "Update CMS" button first. If so, when will I use this option?
2. When I do click the "Update CMS" button it takes it between 30-40 minutes to finish the update. During this time frame the whole development portal (it is sitting on the same WAS as the NWDI) becomes extremely slow. Is this normal response time or do I have a certain performance problem with my server?
Thank you in advance,
Roy

Hello Roy,
I think that <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/46/6fe3ec58f0477a816b80f182b389e0/frameset.htm">this</a> topic should answer all your questions :).
Hope that helps!
Jordan

Similar Messages

  • A few questions regarding the configuration of Adobe Document Services

    <u><i>For Your Information: the main questions are repeated at the end of this post.</i></u>
    The Adobe Document Services seems to work fine. The test I did on http://<server>:<port>/AdobeDocumentServices/Config gives the error
    ' "Required stream: "PDFDocument" not found.” ' so that's fine.
    But when I do this: http://server:50000/webdynpro/dispatcher/local/TutWD_OnlineInteractiveForm/OnlineInteractiveFormApp
    The result: the PDF is shown and I can enter text in the textboxes and also use the radioboxes.
    But I can't use the dropdownboxes, neither can I use the "submit" and "check" buttons..
    Is this normal? Or is it because of the ReaderRights credential?
    Or is it necessary to install the ACF?
    Here is some info I got from a blog:
    "<b>Client Side Requirements</b>
    Follow the steps mentioned below. Please make sure the following prerequisites are met before working with Adobe Interactive Forms.
    NWDS 7.0 / 6.0
    Adobe Live cycle designer 7.1 / 7.0
    Adobe Reader 7.0.8 [ Minimum : 7.0.1]
    <b>End User Requirements</b>
    Adobe Reader 7.0.8 [ Minimum : 7.0.1]
    Active Component Framework (ACF) - SPS 9, SPS 10"
    Two more questions;
    1)This info is in the config guide:
    "If you have installed the ADS and the WD runtime environment on different J2EE engines and if the communication between these engines uses the SLD, you need to publish the ADS to the SLD."
    Does this mean that I don't need to do this when I haven't used SLD? Or is it necessary to install SLD?
    Some more info:
    Prerequisites:
    A System Landscape Dir must already have been configured.
    If you have not yet done so, perform the necessary activities according to the documentation SAP System Landscape Directory, Administrative Activities section, chapters:
    Start and stop the SLD Service
    Configure the SLD Server
    Configure data persistence
    Make settings for the SLD bridge
    You can find this documentation by calling the following URL in your web
    browser: http://<host>:<port>/sld
    When I check this URL, I don't see anything concerning an (already configured) SLD.
    2) Do I need the license below too to develop in AIF?
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bc_srv/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d373530373834%7d
    Main questions----
    I need to create a form with a few fields (of which some fields are mandatory); then I have to use a few BAPI's to check these fields and to save the content in a CRM system.
    I've installed Netweaver Sneak Preview, and configured Adobe Document Services (made ADSUser & ADSCaller, set IIOP etc to Autostart, Installed the credentials). The tests seem to work fine, but I haven't developed anything yet.
    My questions:
    1)Is it necessary to install the ACF?
    2)Is it necessary to install Adobe LifeCycle Designer?
    3)Also SLD?
    4)Also the license described above?
    Grz
    Allan
    Message was edited by:
            Allan Duinslaeger

    No one?
    Some questions are answered by someone else.
    -The SLD is okay, it doesn't need to be configured
    -The Adobe Lifecycle Designer is automatically installed when installing the Netweaver Studio Sneak Preview SP16
    Just two more questions:
    1)when I open http://server:port/webdynpro/dispatcher/local/TutWD_OnlineInteractiveForm/OnlineInteractiveFormApp
    The PDF is shown but I can't use the buttons or the dropdown boxes.
    I tried to install ACF but I have NW04s SP16, and the ACF is only SP11.
    So when I install that, it only shows a blue screen with "I am the placeholder control"
    When I install ACF SP19 for NW04, the PDF shows again, but I still can't use the buttons or dropdowns. Is this normal?
    2) Do I need the license described below?
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bc_srv/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d373530373834%7d
    Main questions----
    I need to create a form with a few fields (of which some fields are mandatory); then I have to use a few BAPI's to check these fields and to save the content in a CRM system.
    I've installed Netweaver Sneak Preview, and configured Adobe Document Services (made ADSUser & ADSCaller, set IIOP etc to Autostart, Installed the credentials). The tests seem to work fine, but I haven't developed anything yet.
    My questions:
    1) What about the ACF?
    2) Also the license described above?
    Grz
    Allan

  • A few questions regarding the Zen Mi

    #: I can't use my Zen Micro while it is charging through the USB port in my PC.
    #2: I can't simply stop music from playing, only pause, until the function it was asked to do is completed, but since I use the "random play all" function, that does take a while. I have only been able to stop it playing (aside from shutting it down) by asking it to play only one track and fast forwarding to the very end of the song.

    You would be better to have posted this in the MP3 players forum.
    . Is that a question or a statement? You can use the player while charging via USB, yes.
    2. There's no stop button. As you've found you can effecti'vely "stop" the track either with pause, or a combination of pause and RW/FF. More here in the Zen FAQ at Nomadness.net.

  • A few questions regarding the Zen Mic

    . Should I take off the sticker in front of the Zen Micro's buttons and screen that it came with?
    2. Why can't I listen to the radio while browsing the menu items?
    3. There's this radio station: B00 who's # is 99.7 But whenever I go to this other station 96.5 it's all staticky and its playing B00 in the background even though that station is called Mix 96.5

    . Yes, it makes it hard to use otherwise. I cut the protector in half and left the other half over the screen.
    2. This is the way the firmware is designed.
    3. Sounds like bad reception.

  • Question regarding the installation of a J2EE 6.40 Add-in

    Hi all,
    I would like to install a J2EE engine on a test instance of ECC 5.0 and have a few questions regarding the installation...
    Do I have to use the MASTER CD to first install the J2EE engine (Support Package 0) and then apply the latest support packages found on the SAP Marketplace?
    Or should be able to directly install the J2EE Add-In by using the latest support packages found on the SAP Marketplace?
    Best regards,
    Xavier Vermaut

    Thanks Bhavik for your reply,
    That's what I actually thought but I get the following problem... Here's what I wrote into my customer message... I am still waiting for an answer and would like to get this solved ASAP
    Dear SAP,
    We would like to install the J2EE 6.40 Add-In on our ECC 5.0 instance
    (TST) but get the following error message at the very beginning of the
    installation
    > Cannot find an installed ABAP system, which is a prerequisite for a
    > J2EE Add-In installation. The installation cannot continue.
    We checked the installation logs (sapinst_dev.log) and found the
    following :
    > Found these instances:
    > sid: MGR, number: 00, name: DVEBMGS00, host: erpqs1a
    > sid: TST, number: 10, name: DVEBMGS10, host: erpqs1a
    Why does the installation say that it can not find any ABAP systems when
    having previously found the 2 different instances running on this
    server?
    Would this problem be related to the fact that we have two instances on
    this server?
    Please find hereunder the way we performed this installation :
    01) Download of the 4 different parts of SAP J2EE Engine 6.40 SP 10
         (Solaris 10 - Oracle)
         Part I   : SAPINST10_0-20000121.SAR         (Solaris 64)
         Part II  : CTRLORA10_0-20000121.SAR         (Solaris 64)
         Part III : J2EERTOS10_0-20000121.SAR        (Solaris 64)
         Part IV  : J2EERT10_0-10001982.SAR          (OS Independant)
    02) Extract these 4 archives into /install/J2EE_640
    03) Check Java Version and Environment Variables
    04) Check Solaris Pre-Requisites
    05) Adapt "product.xml" as specified in OSS Note 697535 (IGS)
    06) Log in as 'root'
    07) Set DISPLAY environment Variable
    08) Move to the Installation directory
          ( /install/J2EE_640/SAPINST-CD/SAPINST/UNIX/SUNOS_64 )
    09) ./sapinst
    10) In the 'Welcome to Netweaver Installation' screen, select
          => Dialog Instance Finalization
    Any idea how to get this solved?
    Best regards,
    Xavier Vermaut
    Message was edited by: Xavier Vermaut

  • Questions regarding the APEX sample shopping cart

    I am fairly new to APEX development, but had a few questions regarding the sample APEX shopping cart:
    1) is there a way to integrate Google check out payments with the sample APEX shopping cart
    2) is there any way to list a service, that involves monthly recurring payments
    3) is there any other shopping cart that is APEX based that is available
    Thank you,
    Ashok

    Hi Sam,
    i am haveing a deadline monitoring for my shopping cart where remainders are going to generate for first day and the second day, after both the remainders generated and the approver changing the cost center or asset or order at that time, the workflow flow should retrigger and send the approval mail to the new approver, but it is not going to the new approver, so the workflow is not triggering in my case. so i need to restart my workflow again if any changes occurs.
    in the second point my functional guy says that, when the approver changes any text or any date like that it should come for the accept changes, and when he sees the approval preview, only the approval person should be there but not the creator person in the preview and when the creator of the sc accepts the changes it is showing that it is approved by the creator name but he says that it should the approver name not the creator name.
    so can you please help me in this to get the solution.
    thanks in advance

  • Few questions about the recording

    Hi,
    I'm intersting in adding recording/playback option to my webcam application and i have few questions regarding the recording functionality:
    1. My webcam app is using P2P connection, will the recording stop my P2P?
    2. Will the recording create some latency in the audio/video?
    3. can i change the quality of the recording?
    4. is there away to encrypt the archived zip file?
    Thanks,
    Tzahi

    1) yes, currently recording is always hub&spoke (and we don't have a real plan to support recording with p2p since it would require a substantial amount of changes in the server-side application)
    2) no, recording is independent from streaming
    3) no - I believe recordings are stored at the quality they are streamed. In theory you could re-encode audio and video stream to a lower quality for playback and repackage the zip file (assuming re-encoding the stream doesn't change the internal timestamps)
    4) currently not. We are simply using the "zip" command (on *nix) to archive the files so in theory we could add the password/encryption option but that would require for you to store the required password on our servers and for us to pass it on the command-line making the process not very secure anyway.
    Any specific reason to keep your archives on your servers encrypted ?

  • Hello, I have a question regarding the sharing/exporting on imovie. Whenever I click the share button all the normal options pop up, but when I actually click where I want to share it to nothing happens.  If you know what's wrong please let me know.

    Hello,  I have a question regarding the sharing on iMovie.  I have just recently purchased an Elgato Gaming Capture HD and I then finished my recording with that and put it into imovie.  I worked long and hard on the project and when I go click the share feature on iMovie all the noral options pop up and when I actually click where I want to share it to nothing at all happens.  If you know what is wrong/ what I am doing wrong please let me know.
    Thank you.
    PS:  I am using iMovie 10.0.6.

    /*line 957 error */
         public void select()
              for (count = 0; count <= p; count ++ )
                   if(P[count] != null){ /* validation */
                   m = (int)(P[count].getX());
                   n = (int)(P[count].getY());
                   if (Math.pow(-1, m + n) == 1)
                        piece[m][n].setBackground(wselect);
                   else
                        piece[m][n].setBackground(bselect);
              step = 2;
         }

  • A few queries regarding the beauty that is Nokia 5...

    I got this beautiful lil machine a lil over a week back. It looks lovely, and sounds even better. And even though, being a student/intern, it cost me more than my monthly salary, I am mighty pleased I got it. And despite the opposition before, it's a great hit, both at home and work. 
    Just a few queries regarding the usage from my experience so far, the answers to which I could not find in this forum and a few other review sites. [Apologies if I'd missed something.]
     1- First, the battery. It only lasts for a little over a day on full charge. From what I'd heard and read, it looked like it should last quite a bit a more, atleast 2 full days. The phone even hung up a couple of times, while recording/playing video. Upon which I had to remove and reinsert the battery. How seriously wrong is this ?
    2- How do you forcefully exit an application, if need be ? It suggests in the guide, and from the reviews I read, there's supposed to be an exit and a start button with the applications when you bring up the task manager. Where're they?
    3- There's this option where you can insert a Slideshow as your Wallpaper. But when I go to it, select the desired images, [ Tried various random images, yes ]it only shows Options and Back button, when select Back, it just goes, well, back. Nothing really happens to the wallpaper. How does that work ?
    4- This might seem like a petty issue, but it can be pretty annoying. Once you go to Options and tell it you are marking, e.g. in the Inbox or the File Manager, how do you mark multiple items, WITHOUT having to go to Options >Mark >Mark/Unmark for each item ? What's the point of having a seperate Marking option in the first place then, when I could just Move or Delete each item seperately anyway. 
    5- And last, any news on a free full version of a document viewer ? From what I looked up, it costs around US$70, which is about a quarter of the phone's purchase price itself. And that's not a modest sum, that too for a basic application such as this, for a anyone with my status.
    Just so any prospective buyer or amateur user such as myself doesn't get scared off by the seemingly long list of inquiries, the phone's an absolute pleasure to use. Specially, for someone with their first Touchscreen/Symbian experience. I got this phone after a LOT of research, both online and in the field. And it's bloody well worth it so far. 
    I know, it's a huge post, but you'd have my utmost gratitude for an accurately detailed response. Thankyou. =)
    Solved!
    Go to Solution.

    Why of course. Something happening to your phone during the process would brick it, not to mention that the attempt would install something in your phone that voids the warranty, meaning that you just made yourself a very expensive paperweight. ^_^. We're not really allowed to talk about it, other than the fact that with the above possibility, I strongly advise you not to do so. There is a way to do it without hacking it. I know of people who have managed to do it without hacking, but it was on the 5800. Hmm, ok, maybe they'll work for you too though.
    http://forum.dailymobile.se/index.php/topic,4254.0.html 
    If you find my post helpful please click the green star on the left under the avatar. Thanks.

  • I have read all the questions regarding the "Can't send photo using iMessage".

    I have read all the questions regarding the "Can't send photo using iMessage". I followed everything and check everything that was in it. It's still the same. I am still not able to send a photo. It started happening last week. It was fine before that. There is no error message.
    It will try to send but it will get stuck just before it sends
    and the red ! will appear with the "Not Delivered" status.
    When i tap on the !, it just says "This iMessage was not delived".
    No other message or photo is sending as the same time as the photo.
    I did reset it, I checked the email address, removed it as well. Turned it off then back on. Signed out and signed back in. Wi-Fi strength is very good. iOS is 6.0.1. I checked for updates, it is up-to-date I also checked a link http://support.apple.com/kb/TS2755. It did not help at all.
    What's wrong?!?!?!?!

    It is not a matter of reconsidering the decision. There are unsolveable technical problems with trying to run a program such as Firefox on Blackberry OS. We would need Blackberry to distribute a tool similar to Android's NDK to run on Blackberries.

  • Hi, I want to downgrade from OSX LEOPARD to OSX TIGER but I have a few questions regarding this. My iMac is originally from 2007 it came preloaded with tiger. I have original install tiger discs version 10.4.10. Is it safe to downgrade or not please help

    Hi, I want to downgrade from OSX LEOPARD to OSX TIGER but I have a few questions regarding this. My iMac is originally from Sep 2007 it came preloaded with tiger. I have original install (2) tiger discs version 10.4.10.  I want to know if it is safe and what are the necessary steps to do so. Also by downgrading im wondering if a lot of apps nowadays support tiger for example I have photoshop version 5 and 4 these are very important to me. One last question does anyone know of any reliable virus protection for mac that doesnt slow down your computer? because I have read that a lot of them do so. If anyone can help me I would greatly appreciate it! Here are the specs for my iMac 
    Model Name:
    iMac
      Model Identifier:
    iMac7,1
      Processor Name:
    Intel Core 2 Duo
      Processor Speed:
    2 GHz
      Number Of Processors:
    1
      Total Number Of Cores:
    2
      L2 Cache:
    4 MB
      Memory:
    2 GB
      Bus Speed:
    800 MHz

    Most of the time a perception of general slow performance is the result of installing third party junk alleged to speed up, "clean" or "optimize" your Mac, or to look for viruses that don't exist. Ideally you would know what you installed so you can uninstall it, but if you don't know or aren't sure there are techniques such as Safe Mode and creating a temporary user account to confirm that suspicion.
    If you open Activity Monitor it may show a process, or processes, that occupy a lot of your system's time.
    Slowness confined solely to web browser activity is often the result of an inexorable progress toward websites that demand ever more processor-intensive tasks. If your slow performance is strictly limited to web browsing, you might try disabling Flash by either uninstalling it, or use utilities such as ClickToFlash that allow you to control what Flash content gets loaded. Flash in itself is not inherently evil, but there is nothing to stop websites or the advertisers who pay for them from writing horrible Flash code that can do everything from hogging 100% of your CPU's time to causing random crashes. You can watch Activity Monitor as in the above to correlate these troublesome web pages with performance degradation.
    You are correct; if your computer shipped with Tiger you may certainly revert to it. I forgot that Tiger was shipping on new Macs as recently as five years ago. To downgrade it would be necessary to completely erase your hard disk and boot with the Tiger installation DVD, followed by installing it anew. Such drastic measures are not necessary and you are unlikely to be satisfied with the results anyway.
    Assuming your system is free of third party parasitic junk attached to OS X in an ill-conceived attempt to improve upon it, that your hard disk drive is sound and the boot volume has enough free space to work with, by far the best performance-enhancing improvement would be to add more memory. Buy as much as your computer can use and that you can afford. 2 GB is not that much any more.
    Read the following for some recommended troubleshooting techniques from Apple:
    General purpose Mac troubleshooting guide: Isolating issues in Mac OS X
    Creating a temporary user to isolate user-specific problems: Isolating an issue by using another user account
    Memory limitations: Using Activity Monitor to read System Memory and determine how much RAM is being used
    Identifying resource hogs and other tips: Runaway applications can shorten battery runtime
    Starting the computer in "safe mode": Mac OS X: What is Safe Boot, Safe Mode?

  • Why is the update all button missing?

    Self explanatory.

    @PogoPossom: Thanks for your efforts in answering this question. I faced the same mystery of the Update All button missing, even though I'm logged in. I tried powering down the iPad and restarting and that fixed the issue - now the Update All button appears. Is this a bug or a feature? 

  • Few questions regarding nokia N900

    Hi,
    I have a few questions regarding n900:
    1- is there different versions of this phone for different regions? for example asia, middle east, europe.. etc. and if there is can i order a different version from nokiausa website?
    2- is the warranty international? even if i get the additional 1 year warranty?
    thank you 
    Solved!
    Go to Solution.

    Hi,can you help shatter some light for me?
    I would like to know if NOKIA planing to release the N900 anytime soon to ASIA and ASIA - Pacific region? I can't find any information regarding N900 on any Asia Pacific region sites. China, Hong Kong, malaysia, Singapore, Phillipines, India, Thailand, Australia. Nothing is found. There are only about 8 Selected regions right now. But Would I would love to know if there by any chance it will be release else where before this Christmas Season.
    I live in New Zealand, but I know that this phone will never going to be in NZ until sometimes next year or maybe never. I would love to buy this phone by any mean. So I'm planing to get it from Asia during my visit there next month.
    Please help clearing this for me.
    2B || !2B N900 1S TH3 F0N3 4 M3
    Please Kudos! me. To show your Appreciation

  • Few questions regarding requirements in context of SAP products

    Hello!
    I have few questions regarding Relational Database, Network Archtecture and Platform Support requirements in context of SAP products. Can someone help by answering the questions, if possible with Yes/No (and short explanation)
    a) Does your system run native to the Oracle 10g RDBMS (RAC) and database tools? If not, please explain the databases and tools supported (Yes/No)
    b) database accept binary-large-objects (BLOBs) and be referenced via the relational engine (Yes/No)
    c) standard pre-defined SQL queries and related calculations provided for use with industry standard reporting tools
    d) Deployable without using any fixed IP addresses (taking advantage of DHCP address resolution) (Yes/No)
    d)software supported on HP-UX 11.i V2 (r6) on Itanium. (Yes/No)
    e) Software supported on OS clustered servers (If mutliple products, please indicate if all are support or list areas where clustering may not be recommended and why) (Yes/No)
    Thank you!
    Regards
    A. Henke

    Hi Axel,
    I've just found your question by accident and would like to know whether you have already implemented 10gRAC in SAP environment?
    regards
    Barthez

  • A few questions about the ka790gx and dka790gx

    i have a few questions about the ka790gx and dka790gx , how much better is the dka790gx compaired to the ka790gx ? . how much difference does the ACC function make to overclocking etc , i plan on getting a phenom II 940BE or 720BE . i already have the ka790gx so would it be worth building another system using the dka790gx mobo , or should i keep what i already have and just change the cpu ?

    It's largely irrelevant what other boards had VRM issues other than the KA790GX - the fact is it died at stock settings. Since there is little cost difference between the more robust DKA790GX (or Platinum if you really need 1394) why bother with the proven weakling? There are other examples around of the KA not having a robust power section.  There's no way I would use even a 95W TDP CPU in the KA and absolutely not O/C.....!
    As for the credentials of Custom PC, I have generally found their reviews accurate and balanced, and echo my own findings where applicable. If a little too infrequent.
    The fact that the KA has such a huge VRM heatsink leads me to my other comments on the Forum, particularly regarding the "fudge" aspect:
    """Henry is spot on - the notion that adding a heatsink to the top of the D2PAK or whatever MOSFETS is effective is virtually worthless. The device's die thermal junction is the tab on the device back - which is always against the PCB pad. The majority of heat is therefore dissipated in to the board, and the fact that the epoxy plastic encapsulation gets hot is simply due to the inability of the heat to be conducted away from the device die via the tab. Not sure when Epoxy become an effective conductor of heat.... Good practice is to increase the size of the PCB pad (or "land" in American) such that the enlarged PCB copper area acts as an adequate heatsink. This is still not as effective as clamping a power device tab to an actual piece of ali or copper, but since the devices used are SMD devices, this is not possible. However, the surface area required to provide sufficient PCB copper area to act as a heatsink for several devices isn't available in the current motherboard layouts. Where industrial SBC designs differ in this respect is to place the VRM MOSFETs on the back of the PCB on very enlarged PCB pads - where real estate for components is not an issue.
    Gigabyte's UD3 2oz copper mainboards sound like a good idea, on the face of it. However, without knowing how they have connected the device tabs to where and what remains a mystery. I suspect it is more hype than solution, although there will be some positive effect. From an electrical perspective, having lower resistance connecting whatever to whatever (probably just a 0V plane) is no bad thing.
    The way the likes of ASUS sort of get round the problem is to increase the sheer number of MOSFET devices and effectively spread the heat dissipation over a larger physical area. This works to a degree, there is the same amount of heat being dissipated, but over several more square inches. The other advantage of this is that each leg of the VRM circuit passes less current and therefore localised heat is reduced. Remember that as well as absolute peak operating temperature causing reduced component life, thermal cycling stresses the mechanical aspects of components (die wire bonds for example) as well as the solder joints on the board. Keeping components at a relatively constant temperature, even if this is high (but within operating temperature limits), is a means of promoting longevity.
    For myself, the first thing I do with a seperate VRM heatsink is take it off and use a quiet fan to blow air on to the VRM area of the PCB - this is where the heat is. This has the added benefit of actively cooling the inductors and capacitors too....
    Cooling the epoxy component body is a fudge. If the epoxy (and thus any heatsink plonked on top of it) is running at 60C, the component die is way above that.....
    It's better than nothing, but only just."""

Maybe you are looking for

  • Hp deskjet 1510

    Hello, My HP DeskJet 1510 just ran out of ink so i ask someone to buy an ink so i can refill. it is my first time refilling this as i used this for just a week. The thing is, i refilled the ink just fine and then i receive something saying "Counterfe

  • HT201628 will i loose apps if i reinstal itunes in my windows 7 pc

    will i loose apps if i reinstal itunes in my windows 7 pc

  • Some USB keys not working on HP Elitebook 8770w

    Some USB keys (32GB) isn't recognised in my laptop. On other cemputers they just work properly. I tried install chipset and USB 3.0 drivers but it didn't help. What can I do? P.S. older (smaller) USB keys work OK.

  • Samsung galaxy 3 android firefox keeps resetting 'desktop' icons

    Samsung galaxy 3 android. Downloaded firefox ap. Now every once in awhile the shortcuts I've added to the desktop of the tablet are reset so instead of seeing the text of the sites I've set, they all becone the generic firefox globe with no idea wher

  • Open and edit in Preview?

    Hi Guys, I have ALL my photo's stored on iPhoto 09. Sometimes I want to be able to change the size of a photo and the only way to do so seems to be in Preview. Is there anyway to open photo's stored in iPhoto in Preview? Also, I'd still like to keep