FF67 problem, can't change statement date(statement saved but not post)

I need to change the statement date of a bankstatement. I did not post the statement yet.
I used a wrong statement date, and I want to change it, but I saved it after booking the second screen(the one with the
statement items)
When I look by Manual Bank Statement Overview I see the bankstatement, but it has no Posting complete remark yet, because it has not been postefdofcourse.
The problem is I can't change the statement date, because when I try to Post then the systems gives an error because it does not accept the new statement date I want to use.
Is there a way to solve this problem? The statement has not been posted yet, so I suprised I can't change the statement date.
Anyway I hope somebody can help me out.

I had to post them first because otherwise it looks I could not delete the statement.
I saw no Id with only saving, that's why I post them. then the statement got an id.
What do I have to choose to make it possible to delete statements, not posted yet.
I guess I have to select something else because I did not see any Id to choose.
I do a manual input of the bankstatements (no import).
Whst's the best I can do now? What do you mean with FI?
I guess I can do a manual booking on the three(send/receive and general) bankaccounts to get the right position of the accounts?
The bankstatements are ok(booked with ff67) only the three accounts I mention above have the wrong position.

Similar Messages

SATA Problem: Can see hard disks in USB enclosures, but not internal

I have a mid-2010 macbook pro 13". The other day, it crashed on wake-up, and would not boot. I had a OCZ Vertex SSD boot drive, and the OEM hard drive in an optibay enclosure (replaces the optical drive and used only for data). I used this setup for one year with no problems. After much troubleshooting, I found that I could see the SSD drive by booting into a recovery partition that I have on a USB stick, and putting the SSD in a USB enclosure. Then disk utility could see it, but not mount it. The label on the boot partition was "lion", but it changed to "disk1s2". I was able to repair the drive using disk utility, and then boot from it using the USB enclosure.
Once booted, I could still see the OEM hard drive with no problems. So I powered down and put the SSD back inside the case and rebooted. It booted in safe mode, but it booted fine. The next time I rebooted, it would not boot. I swapped the OEM drive and the SSD drive, and then the sytem booted with no problems and I was able to use both drives.
One day later, I noticed my OEM drive was no longer mounted in OSX. I took it out, put it in a USB enclosure, and OSX could see it fine. There were no errors on the disk. I put it back in the macbook and reboot but OSX couldn't see it.
So, the primary SATA port seems to be working intermittently. Three times now, a drive has stopped working on this port. Each time, I could use the drive in an external enclosure (or using the other SATA port normally used for the optical drive. Does anyone have any ideas? Could it just be the cable? It is the motherboard?
I'm trying to make this computer last at least another month or so because I need to upgrade to a larger model, and am holding out for the 2012 release.

Could be something as simple as the cable...they have been known to go bad. Got an Apple store nearby? If so, it's a cheap/easy replacement.

Mass update changes are showing as saved but not updating.

Hi Gurus,
When I try to do some changes for scheduling agreement line item using t-code MEMASSSA the message is showing as that changes are saved, but when I log into schedule agreement these changes are not being update, even I donu2019t find any change in the log, can anyone let me know why this is happening. Thanks in Advance.

Hello,
Mass change for SA is clarified in note 1046851:
"BAPI_SAG_CHANGE and BAPI_SAG_CREATE are restricted for time dependent
condition. Whether a document uses time dependent condition or document
condition is defined in customizing table T161 field STAKO. This set up
is stored in the document at header level..."
If this was allowed previously, then this was a program error and
subsequent will create inconsistency in your system as the
functionality was intended to block in mass transaction. If not
there are possibilities of problem described in note 1034912.
1034912 MEMASSSA - document conditions are deleted
See aso, 1046794 FAQ: BAPI for outline agreement question 1
1. Question:
You want to change a scheduling agreement via BAPI_SAG_CHANGE and
receive the error message MEOUT019: "Scheduling agreements with
time-independent conditions are not supported". Why?
Answer:
BAPI_SAG_CHANGE (and BAPI_SAG_CREATE) can only treat scheduling
agreements with time-dependent conditions. Document conditions are not
supported. Therefore, this kind of scheduling agreements cannot be
processed. This is a missing functionality.
Regards,

When I use the search I can find the bookmarks i've saved, but not in which folder among my many they are

So I have tons of bookmark folders with tons of pages in each folder now at random times (do to unintended myself actions or whatever) i lose a folder that was in a specific hiearchy of other folder. I do a search for a site i know was in that folder it shows me all the sites in that folder but not where the heck that folder is in my heirarchy.
when it's big it's a pain to look for it and when i do even 4 times over still cant find them

There is an extension you can install which adds a "Parent Folder" column in the Library dialog (Ctrl+Shift+b). It has an option to show the full path instead of just the parent folder.
https://addons.mozilla.org/firefox/addon/show-parent-folder/

How can I change the date format in Reminders and in Notes?

How can I change the date format in both Notes and Reminders? Preference on Imac and Settings in IOS do not allow me to change the format in those 2 apps.
I Like to see 10oct rather than 10/10, as an example.

pierre
I do not have Mavericks or iOS - but the first thing I would do is reset the defaults - I'll use Mavericks as an example
From If the wrong date or time is displayed in some apps on your Mac - Apple Support
OS X Yosemite and Mavericks
    Open System Preferences.
    From the View menu, choose Language & Region.
    Click the Advanced button.
    Click the Dates tab.
    Click the Restore Defaults button.
    Click the Times tab.
    Click the Restore Defaults button.
    Click OK.
    Quit the app where you were seeing incorrect dates or times displayed.
    Open the app again, and verify that the dates and times are now displayed correctly.
Then customize to taste - OS X Mavericks: Customize formats to display dates, times, and more
OS X Mavericks: Customize formats to display dates, times, and more
Change the language and formats used to display dates, times, numbers, and currencies in Finder windows, Mail, and other apps. For example, if the region for your Mac is set to United States, but the format language is set to French, then dates in Finder windows and email messages appear in French.
    Choose Apple menu > System Preferences, then click Language & Region.
    Choose a geographic region from the Region pop-up menu, to use the region’s date, time, number, and currency formats.
    To customize the formats or change the language used to display them, click Advanced, then set options.
    In the General pane, you can choose the language to use for showing dates, times, and numbers, and set formats for numbers, currency, and measurements.
    In the Dates and Times panes, you can type in the Short, Medium, Long, and Full fields, and rearrange or delete elements. You can also drag new elements, such as Quarter or Milliseconds, into the fields.
    When you’re done customizing formats, click OK.
    The region name in Language & Region preferences now includes “Custom” to indicate you customized formats.
To undo all of your changes for a region, choose the region again from the Region pop-up menu. To undo your changes only to advanced options, click Advanced, click the pane where you want to undo your changes, then click Restore Defaults.
To change how time is shown in the menu bar, select the “Time format” checkbox in Language & Region preferences, or select the option in Date & Time preferences.
Here's the result AppleScript i use to grab the " 'Short Date' ' + ' 'Short Time' " to paste into download filenames - works good until I try to post it here - the colon " : " is a no-no but is fine in the Finder
Looks like iOS Settings are a bit less robust
- Date/Time formats are displayed according to 'tradition' of your region > http://help.apple.com/ipad/8/#/iPad245ed123
buenos tardes
ÇÇÇ

Can I change component's state?

Hi All
First of All, I'm sorry for my english. But I'll do my best to explain my question.
Can I change component's state?
For example, When I click the button, I wanna change Label's state.
<s:states>
<s:State name="A"/>
<s:State name="B"/>
</s:states>
<fx:Script>
<![CDATA[
      private function changelblState():void{
           // lbl.includeIn = "B"          --> impossible
   // or
   // lbl.state = "B"                  --> impossible
]]>
</fx:Script>
<mx: Label id="lbl" includeIn="A"/>
<mx: Button click="changelblState()"/>
How can I change component's state?
Thanks in advance.
Kevin.

Thank you for reply.
But I've already tried.
<s:states>
<s:State name="A"/>
<s:State name="B"/>
</s:states>
<fx:Script>
<![CDATA[
      private function changelblState():void{
         lbl.currentState = "B"
]]>
</fx:Script>
<mx: Label id="lbl" includeIn="A"/>
<mx: Button click="changelblState()"/>
I got the error message.
ArgumentError: Undefined state 'invisibleSmallVideo'.
at mx.core::UIComponent/getState()[E:\dev\4.y\frameworks\projects\framework\src\mx\core\UICo mponent.as:10607]
at mx.core::UIComponent/findCommonBaseState()[E:\dev\4.y\frameworks\projects\framework\src\m x\core\UIComponent.as:10627]
at mx.core::UIComponent/commitCurrentState()[E:\dev\4.y\frameworks\projects\framework\src\mx \core\UIComponent.as:10381]
at mx.core::UIComponent/setCurrentState()[E:\dev\4.y\frameworks\projects\framework\src\mx\co re\UIComponent.as:10323]
at mx.core::UIComponent/set currentState()[E:\dev\4.y\frameworks\projects\framework\src\mx\core\UIComponent.as:6425]
I know this is fault. If I can use lbl.includeIn = "B"; , I can solve it, but I can't.

How can I change the date on photos I got from someone else?

I attended an event with a friend and the photos of hers that I downloaded from Facebook have a very old date (December 2009). I suspect she doesn't have the date set in her camera. So iPhoto thinks the event went from Dec. 31, 2009 to Aug. 24, 2012 and organizes it in Events in Dec 31 2009, so it isn't where I look for it. I have tried changing the date on the pictures I got from her, but that field is uneditable for those pictures. I can change it on my own, but not hers. How do I get these photos to show the correct date so that they appear in the correct order?

No worries. I asked pretty much the same question about 2 years ago. After all the problems I come here to have solved, I finally solved someone else's!

How can i change the date of birth on my account

how can i change the date of birth on my account

Hello! Please login here: https://appleid.apple.com/account/manage
Then go to "Password and security"
Answer your security questions and the birthdate option will appear.

I can't change the date on my photos. i click on adjust change and date and it does not give me the earliest date to change

I can't change the date on my photos in events. I click on adjust date and time of selected photos and the date that I can edit is the oldest photo date and not the earliest. Help?

iPhoto should be showing you the date of the first photo you selected.
What do you want to achieve? It should not matter, which photo you select to adjust the time, because all photos will be corrected by the same fixed increment, if you use "Adjust Date and Time".
If you want to set all photos to the same time, use "Photos > Batch Change > Set Date to" instead.

Can we change pricing date for line item in billing

Hi Expert,
Can we change pricing date , while raising inoice for particular line iteam

Hi,
We can not change the pricing date for perticular line item at billing document level, the only option is we can enter the required date at the time of invoice creation in VF01 screen.
If your requirement is copying the same pricing date that is entered at sales order, then do the following.
Go to T Code:VTFL and choose your DElivery Type and Billing Type, then choose your item category and then change the pricing type as 'D' .
Regards,
Pasapula.

Urgent- Can we change the data in an Approved sales order

Hi Experts,
Can we change the data once the Sales Order is Approved. If not Is there a solution to be done through SDK or B1 itself. Any help will be greatly apprieciated.
Thanks
John

Hi John,
Unfortunately it cannot be done. Because if you are not able do it manually or by User Interface then it will not be possible by SDK or any other approach,as far as I Know.
Meanwhile you can create a duplicate of the approved document. Make changes to that. And Close or Cancel the approved one.
Hope it helps.
Thanks & Regards
Ankit Chauhan

How can i change the date format mm/dd/yyyy to dd/mm/yyyy

How can i change the date format mm/dd/yyyy to dd/mm/yyyy

Date, time and currency formats are controlled via Settings > General > International > Region Format - you can't just change the date format

Can we change the date format to be dd/mm/yyyy?

Can we change the date format to be dd/mm/yyyy?

Hello leahmaree,
Yes, you can:
Click the Options tab
Click the Language & Formatting label
Set the Date Order preference
I hope that helps,
Brian

Can we change start date of Additional Actions(0302)Record

Hi All,
Can we change start date of Additional Actions(0302)Record.
Please reply us as soon as possible.
Regards,
Chandra P

Thanks Sikindar
It helps us very much.

How can I change the date "taken" on individual photos in iPhoto?

How can I change the date "taken" on individual photos in iPhoto? I have some photos that were scanned and the date "taken" info displays the day the picture was scanned as opposed to the date it was actually taken. Is there some way to edit this information?

In iPhoto '11 on your Mac use the command "Photos > Adjust Date and Time" and enable the "Modify original files" option, if you want to set the date of the originals to the correct date as well.
Regards
Léonie

FF67 problem, can't change statement date(statement saved but not post)

Similar Messages

Maybe you are looking for