FI_E018 - Period 006/Fiscal Year 2010 for FM posting in value type 54
Hi all,
I am using Former Budgeting and is configured for Commitment Budget only (not configured for Payment Budget). When I tried posting via GL Document Entry to test FM, I encountered the following error.
[Message no. FI_E018 - Period 006/Fiscal Year 2010 for FM posting in value type 54
Diagnosis:
Posting for the document of value type 54was attempted on a date that has not been opened in FM.
Procedure:
To define open item intervals for FM postings, use the following transactions:
Individual Maintenance of Open Time Intervals
Mass Maintenance of Open Time Intervals]
I have already maintained in transaction FMIR.
The entry is:-
Budget Category/Year/Value T/Account Assign Elem/Value/AuGr/Frm/To
9B Commitment Budget/2010//00 All Account Assignment// / /16
What else do you think could be causing this error?
Regards,
Bernard
Go tcode FMIR.
Ensure that you both entries:-9A Payment Budget and 9B Commitment Budget.
Budget Category/Year/Value T/Account Assign Elem/Value/AuGr/Frm/To
9A Payment Budget/2010//00 All Account Assignment// / /16
9B Commitment Budget/2010//00 All Account Assignment// / /16
Regards,
Bernard
Similar Messages
-
Error when closing fiscal year 2010 for fixed assets
I was performing year end close for asset management using TCode AJAB and received an error that one asset has not completed posting depreciation for 2010.
When I looked at the asset that was causing the error I noticed there is still remaining "planned" depreciation for the year 2010. Apparently, there was some subsequent cost added to this asset after December 2010 depreciation was posted.
Can I process depreciation again for December for this one asset? If so, what Tcode would I use?Hi
You have to execute repeat run in AFAB for DEC 2010 and then try to close using AJAB.
REgards
Malathi
Edited by: malathi_u01 on Feb 9, 2011 9:09 AM -
KP26 version 0 lock for fiscal year 2010
why i cannot update KP26 using version 0? but when i using version 1 its ok ?
now my fiscal year is 2010, and period 3.
the error shows - version 0 is block for fiscal year 2010. where i should check and change?Hi,
check this link.
link:[Re: Activity type problem;
hope it'll give some idea.
Regards,
Sneha. -
Fiscal year 2010 Not allowed while creating Process order in COR1
Dear Friends,
We have gone SAP live in the month of October. The fiscal yeat we are using is 2011 as the client is Indian client. I have made the fiscal year variant for 2011 (V3). The FI document posting with Fiscal year 2011. It is also creating the Controlling document and Profit center document without any problem.
We have also made the period open as 2011 in MMpv and MMRV. The goods receipts is working fine and the finance entry and material document gets generated for the fiscal year 2011.
Now we are creating the process order in COR1 and getting the error message Fiscal year 2010 not allowed as below.
Fiscal year 2010 is not allowed
Message no. F5568
Diagnosis
The fiscal year entered (2010) is different from the fiscal year derived from the posting date and fiscal year variant (2011).
System Response
Error.
Procedure
Correct the fiscal year entered.
In KP26 we have maintianed for activity price for 2010 & 2011 and the system is picking the data for the fiscal year 2010 data and not the FY 2011 data.
I have checked in OKEQ (Costing version '0') The valide start date for FY2011 is 01.04.2010.
Is there any other place to maintain the fiscal year in Controlling area or Prodduction Planning???
I last my patient last 5 days doing R&D. Can any one help me where the fiscal year is picking and why it is picking FY 2010??
Regards,
DevendranHi Ajay,
Thank you for your comments. I have checked the Factory calendar and that is 2010 (January to December). We have tried to change to 2011 but the system automatically picking the date from January 1st 2011 to 31st December 2011. I am unable to create calendar year with date from 01.04.2010.
I have discussed with my PP consultant about this issue, he is telling the factory calendar nowhere related to Fiscal year. Do you have any idea how to change the factory calendar of 2011 from 01.04.2010 to 31.03.2011?? Is there any there reason why my system considering the Fiscal year 2010 instead of 2011???
Your inputs will defenitely help me to get an clue.
Regards,
Devendran -
Message F5 568: Fiscal year 2010 is not allowed
Hi All,
While creating reservation through MB21,
we are transfernig our stock material from one company code to another company code.
First company code is activated with CALENDAR YEAR, while the other is with FISCAL YEAR (JUL-JUN)
While creating the reservation, it prompts the following error
Message F5 568: Fiscal year 2010 is not allowed
Any suggestion?
Warm Regards,
NThe error is happening because the company codes invloved have different fiscal year variants assigned to them and SAP does not support constellation.
However, you may want to try opening period 2010 for both company codes if you've not yet done so and try again to see if you will get the same error.
Please use transaction code OB29 to open calendar year 2010. This is done by clicking on periods in OB29.
Elias
Edited by: Elias Akorli on Oct 28, 2009 12:20 PM
Edited by: Elias Akorli on Oct 28, 2009 12:25 PM -
Period and Fiscal Year in a report selction screen (3.1 I version of SAP.)
Hi Team,
I have a requirement on a Zreport. Suppose if we are executing a report in the month of March (3)-fiscal year 2011 and if I select a variant and the varinat should populate period as Feb (2 period) and fiscal year as last year (2010).
In Nut shull if i am executing the report todays date the period and fiscal year in the selection screen should be 2 and 2010.
Also please note that i am working on 3.1 I version of SAP.
Your inputs are highly appreciated.
Thank you
Venkatesh BillaHi,
Generatlly while saing the variant for the report selection screen you can use the dynamic date calculation , where the last period and last fiscal year options are available.
Also you can choose the option of calculating the period and fiscal year in your program and can default the same on the selection screen. But I think you should check in ABAP forum for this, whether there anything in coding also.
Regards,
Gaurav -
F5568 - Fiscal year 2010 is not allowed on CO-RA Reverse Settlement
Hi,
I´m running report RKO7CJ8G, my goal is make settlement in 2010 and post the document in 2011. When I inform Settlement Period = 12, Settlement Year = 2010 on the Parameter box and set reverse settlement on box Execution Type and posting period = 9 and posnting year = 2011 on optional parameters, I´m receiving the message: "Message no. F5568 -> Fiscal year 2010 is not allowed". I´m not expert in this module and I´d like to know if this operations is allowed, or is possible to do.
We are in 2012, the post will be in 2011 and settlement in 2010.
I look trx OKP1 and period 12 year 2010 is totaly open, like OB52.
Thanks in advance.
Regards,
EgbertoHi Ajay,
Thank you for your comments. I have checked the Factory calendar and that is 2010 (January to December). We have tried to change to 2011 but the system automatically picking the date from January 1st 2011 to 31st December 2011. I am unable to create calendar year with date from 01.04.2010.
I have discussed with my PP consultant about this issue, he is telling the factory calendar nowhere related to Fiscal year. Do you have any idea how to change the factory calendar of 2011 from 01.04.2010 to 31.03.2011?? Is there any there reason why my system considering the Fiscal year 2010 instead of 2011???
Your inputs will defenitely help me to get an clue.
Regards,
Devendran -
"Activity type 420 1002 2393074 in the fiscal year 2010 not valid" PM03
We have an issue with the PM03 for the year 2010. "When the scheduler tries to schedule the pm..He gets an error "Activity type 420 1002 2393074 in the fiscal year 2010 not valid" The planner will close the work order then re-open it. The error will go away, but when the work order is scheduled there is 0 hours scheduled.. This will be a big issue if there are not any hours assigned to work orders.
Can you help me?
Thanks!Davison,
Please maintain the prices for the activity type, Cost center combination for the fiscal year 2010 using transaction KP26. The log generally disappears after you save and leave the transaction. You will see the log again only when you reschedule the order and are in the same transaction.
Also check whether "scheduling" has been activated for the PM03 control key for scheduling to be taken into consideration for the operation.You can view the same by using the drop down for the control key on the transaction.
Regards
Narasimhan -
Account not posted to in fiscal year 2010 or trans. figures arc
Hello Experts
i am getting the following error in fs10 while seeing the balances at balance sheet level after done full settlement in CJ88
Account 172001 0219 not posted to in fiscal year 2010 or trans. figures archived
Can anybody please give me suggestion?
Thanks and Regards
vamsiHello Exports
thanks for your help
My problem was solve by my slef
thanks
vamsi -
Maintain Fiscal Year Varient for PPM
Dear Expert...
I want to set the fiscal year variant for April to March.
I have maintained fiscal year variant V3 periods and periods text. When i am trying to define planning period type during that i am geting an error-Fiscal variant V3 uses periods not supported by pipeline performance mgmt.
Please suggest me what i need to do for next step.
Thanks
SAP User-MontuHi Montu,
Please refer the below links. It has some useful information.
Pipeline Performance Management - fiscal quarters
http://help.sap.com/saphelp_crm70/helpdata/EN/9d/f6a3dbbbd3451f91c57558774c7123/content.htm
Warm regards,
Murukan Arunachalam -
Hello All,
I have uploaded my legacy assets in DEV client for testing(Transfer date is 31.12.2008)
After uploading, i'm going to check the balances through AR02 report in the FY 2009, but it is giving below error message
Fiscal year change not yet made for company code XXXX
Message no. AB059
Diagnosis
You have not yet carried out a fiscal year change for company code XXXX,
although the current system date is in the new fiscal year.
Procedure
Carry out the fiscal year change for company code XXXX.
I know we can't open more than two FY's in AA, but what can be done for the uploading assets(Transfer date 31.12.2008).
Can we close current FY in AA module which is 2011?
Please advice me.
Rgds
Murali. NDear Rajesh,
Thanks for the reply.
First of all please tell me
My system date is in the FY 2011, and I am checking the report for the FY 2009.
I heard, only we can open two fiscal year in AA.
So, is it possible for me to check the balances in FY 2009 through AR02.
Is there any way to clost the FY 2011 in AA, so that I can work in FY 2009 & 2010.
Please guide me.
Rgds
Murali. N -
Get error in AJRW - Fiscal Year change for Assets
Dear Expert!
I am facing with the following problem when run AJRW in Test Run mode.
Company Code: 1000
Fiscal year: 2010
Fiscal year change statistics - Test Version
Status Company code Read..... Already changed.... To change.... Incorrect..... Without values..... Already deactivated....
(Those above column content is all blanked)
And in "Error log" button
Fiscal year change requested for the past (Message type error)
Problem class very important with log number 00000000000003117262
The current asset Fiscal year in OAAQ & OAAR is 2009, user already posted depreciation for 01/2011 & 02/2011. And they can't execute AJRW to close old fiscal year (FY 2010).
I am new in Asset Accounting Module. Any suggestions will be greatly appreciated with points.
Best regards.Dear:
Please try to run AJAB online in test mode and then in production run for 2010 and then run AJRW.
Regards -
Hi Guru's,
I'm trying to make a report with the following key figures colums:
column 1: balance, restricted by fiscal year/month (with a variable, user entry), i have my own fiscal variant
column 2: balance, restricted by the last period last fiscal year (user exit)
<u>for example:</u> column 1 shows the values of period 005.2006, then automatically column 2 shows the period 012.2005
for column 2 i created a user exit variable ZVARLPLY, can anybody help me with the coding in the user exit? I already tried to use the variable "0P_BA102 --> ZP_BA102", but it didn't work. The error "Variable 0P_BA102 could not be replaced" will disappear when i check the input of the variables.
Can anyone help me?
Regards,
PieterAssign points if helpful!
You can use this logic and modify it accordingly
DATA: l_s_range TYPE rsr_s_rangesid,
loc_var_range TYPE rrrangeexit,
l_year TYPE n.
WHEN 'ZVARLPLY'.
IF i_step = 2.
LOOP AT i_t_var_range INTO loc_var_range
WHERE vnam = '<user entry variable>'.
l_year = loc_var_range-low(4). "Get year
l_year = l_year - 1.
l_s_range-low = l_year + '012'. "last year + '<last period of fiscal year>'
l_s_range-high = loc_var_range-high.
l_s_range-opt = loc_var_range-opt.
l_s_range-sign = loc_var_range-sign.
APPEND l_s_range TO e_t_range.
EXIT.
ENDLOOP.
ENDIF. -
I purchased a year subscription for Huffington Post Magazine $19.99 and when I go to the Newsstand and try to read the latest issue it tells me I have to pay $0.99?
They are only free via the account orginally purchased or if they came pre installed on the computer. Depending on what you have purchased already us the one account for the app store - saves headace and hassel in the future thus not double buying software. Do you have iwork installed on your imac? meaning the iwork 09? if you do your should be able to to to the store and update it. Worked fine for me since i bought the DVD version of iwork 09 and Aperture 3. I did not want to have to rebuy them so the app store noticed i had them installed and changed the update via the app store.
-
Cost element creation: no fiscal year defined for given period
hi all,
I am getting the above erroe when I try to create the cost element with the category 1 (primary cost/cost-reducing revenues). If I use category 11 (revenues) then the error is not displayed.
Please advise.
regards,
FShi.........
1. first check whether fiscal year variant assigned to company code and controlling area is same.
2. check whether fiscal year variant is year dependent or not.
Regards,
Manish Jain
Maybe you are looking for
-
Sharing iTunes throughout a house
I am starting to wish Steve Jobs would come up with some sort of weird hybrid Time Machine / Mac mini / Apple TV / Drobo thing, at which point, frankly, he could take my credit card details and charge whatever he felt to be appropriate...but while I
-
Do I have to own a apple device to use iCloud on my Windows 7 PC
I do not own an Apple device seemly to utlizie iCould I must initially own one before being able to use on my Windows PC with Outlook 2010?
-
Error:tenderSTATUS (not offerED to forwarding agent) in vt01n
hi gurus, how to counter the above mentioned error. also where is the maximium weight assigned to shipment type(I M GETTING ERROR MAXIMUM WEIGHT LIMIT REACHED. how does data get in to the shipping document that is vt01n from LF or OR THANKS IN ADVAN
-
Hi to all; I would like to ask you, if it is possible to do in JSF with following condition: Step 1 of 3 [edit page] Parameter 1 : value 1 Parameter 2 : value 2 Parameter 3 : value 3 Parameter 4 : value 4 (new val 4) Parameter 5 : value 5 (new val 5)
-
i am trying to sync songs onto my ipod but itunes is telling me i have no more memory because i have 544 songs when i have no contex in my music. how do i solve this?