FI-SL Document and its Ref document

Hi everyone,
       I created a cross company code document which created two fi docs under two company code, and two corresponding FI-SL docs were also created.  Two Fi-SL docs' ref documents are the same one. While, if I create a single Fi doc, this doc number should be the ref doc number of its Fi-SL doc generally.  So can we do something so that FI-SL docs' ref doc number can be its own FI doc even with cross company code document ?
regards.
zhihua

Hi Preeti,
     screen shots are provided. Please suggest.

Similar Messages

  • Exception:"Decrease the number of char between the beginning of the document and its root element"

    I'm now using a javabean in my jsp page to parse xml;when my xml file's size is
    about 10k,it just work fine;when my xml file's size became 50k,it throws the followng
    Exception:
    Failed to open xml document,Failed to retrieve Public id or system id from the
    document. Decrease the number of char between the beginning of the document and
    its root element. But when I run this javabean in JBuild ,it works fine no matter
    how big the xml file becomes;
    Why? the error message is in the attachment.

    The prologue must be included at the top of the document, followed by the root
              element.
              joden2000 wrote:
              > what does this exception mean:decrease the number of char between the beginning
              > of the document and its root element? When my xml file is about 10k,it works
              > just fine,when it becomes 50k ,the exception show.How can I deal with this?
              

  • Erase a document and its show a message asking for a password

    I try erase a document and its show a message asking for a password of the administrator, and them the document don't go to the trash. How can I solver this?
    I alredy try change the definitions and preferences of the finder and don't solve the problem.

    Choose your Home folder "Get Info" (command-i) and be sure you have "read & write" in the Sharing & Permissions section. Check under "General" section to be sure it isn't locked. If that is correct, launch Applications/Utilities/Terminal and at the prompt copy & paste this command…
    mkdir ~/.Trash
    Press return.
    If you get a message that the folder already exists, copy & paste these commands...
    sudo chown $UID ~/ .Trash
    Press return.
    Enter your admin password (it will be invisible)
    Press return.Then enter
    chmod u+rwx ~/.Trash
    Press return. Log out and back in, or restart.

  • Im trying to save my cv as a word document and its not giving me the option to do when i save as

    im trying to save my cv as a word document and its not giving me the option to do when i save as

    Nathan,
    You don't say what version of Pages you are using or what version of the OS you are using. In general though, you can Export to Word format either from the File menu or the Share menu, and under some circumstances, when you Save, you can check a box to Save a Copy as: Word. Export is the best option from the point of view of being reliably available in either File or Share menus.
    Jerry

  • Relation between statistical document and the real document

    How do I get relation between statistical document and the real document.
    Actually I want to reverse the posted real document and then convert statistical document into real document.
    Problem is that I have the Main/Sub transaction of statistical document but not of real document. So how do i link both of them.

    Hello,
    LFA1 is just a master data table.
    To get the number of open items you refer table BSIK
    To get the number of cleared items, you refer table BSAK
    These two tables gives you the number of line items posted on vendors.
    Hope this is informative.
    Regards,
    Ravi

  • Problem during creation of shipment document and shipment cost document

    Hi
    My client  facing problem during creation of shipment document and shipment cost document at the time of Batch Job
    Delivery no 897654: goods issue on 30.11 at 13:22. Shipment on 30.11 (VT01N).
    Shipment costs on 1.12 (VI01).
    the problem is the shipment document get created on 30.11.2010 but the shipment cost document get created on 1.12.2010
    pleas advice.

    Hi,
    Please check the batch job processing log.
    As per my understanding, business requires to generate the Shipment & Shipment cost documents immediatley.
    However there is some time between the documents creation time. I dont see any issue in the data or problem in the delivery docs Because system will not generate the shipment docs after 1 or 2 days if there is an issue with the data . There must be problem in the Batch Job.
    Analyse the batch jobs and timing of the job process.
    Let us know your feedback...
    Best Regards,
    MKumar

  • Difference in Profit Center Document and CO-PA Document

    Hi,
    We are getting difference in Profit Center Document and CO-PA Document Cancelled Sales Invoice.
    Sales Accounts GL:
    Profit Center Document amount in Sales Accounts GL: 558095.04
    CO-PA amount in Sales Accounts GL: 558095.15
    In Sales Invoice, Exchange Rate is maintained as 7.75132
    Invoice Amount is 72000 USD. So the Amount calculated should be 558095.04.
    In Accounting Document the Amount posted as 558095.15 for the GL Sales Account.
    But in Cancelled Sales Invoice, Amount posted is  558095.04 in GL Sales Account.
    So Profit Center Document is picking the Amount 558095.04, but CO-PA document is picking wrong amount i.e from Sales Invoice and not from Cancelled Invoice.
    Please help me to understand why Co-PA Document is fetching amount from Sales Invoice and not Cancelled Invoice.
    Also why there is difference in Sales Order Invoice and Cancelled Sales Oder invoice Amount.
    Regards,
    Debashri Dutta

    Hi
    Yes you can transfer the planning data from COPA to ECPCA. You can do the configuration at
    SPRO->Controlling->Profitability Analysys->Planning->Integrated Planning->Set up transfer of planning data to ECPCA/FIGL
    Then you can use TCode KE1V to transfer the planning data.
    Regards,
    Suraj
    Edited by: Suraj Ramamurthy on Nov 13, 2008 1:59 PM

  • Table having the link between  Clearing document and the Invoice document

    pls can someone tell me the table that having the relationship between clearing document and the Invoice document.
    Thanx .

    Hi,
    You can try with the following tables: BSE_CLR, BSEG, BSAD, BSAK.
    Regards,
    Svetlin

  • Status request awaiting documents and trip awaiting documents

    Hello everybody,
    In "trip receipts without general trip data", in travel reporting, you can be set by status.
    In tab Status, in Request/Trip ind., there are 2 status: "request awaiting documents" and "trip awaiting documents".
    My question is:
    Is posible change manually the trip status to some of this status?
    Regards

    Actually thats the opposite, in customizing you defined that trip must be posted to FI before allowing  creation of expense report.
    Post your requet to FI using PRFI, PRRW.. then create your expense report from this request.
    Regards
    Mathieu

  • Archived some of documents and deleted that documents.That archived do

    Hi,
    1 had archived some of documents and deleted that documents.That archived document I can able to see from T.code FBL3N,but we want to see that archived documents from T.code FS10N.
    Regards,
    Srikanth.

    Right click the song on iTunes and hit obtain album info I believe. Then sync.

  • Billing document and Excise invoice document number should be same

    Dear SD gurus
    kindly help me following client requirement
    in order to cash (domestic & Exports)
    and sto (intra and Inter plant to plant) scenarios the billing document number and excise invoices number should trigger  same number
    Example order- delivery- pgi- commercial invoice (VF01) --- billing document no.1234 here it should create automatically excise invoice no 1234
    in J1iin disply it show ref document no( billing document no: 1234.    & excise invoice no 1234

    Dear All,
    As per the standard it is not possible. But some times client says why two different numbers ranges we require same numbers ranges for both billing doc. & Excise invoice.
    Please go through the following link
    http://saptechsolutions.com/pdf/SDDocumentNumberRangeEnhancements.pdf
    Also check with the Abaper with explicit enhancement by maintaining the number range values in Custom table where we go when ever there is no option for(if client is not convincing) but which is not reccomandable but left out with no choice when client is demanding.
    Regards,
    S.Himavanth.

  • Table name for open delivery document and open billing document.

    Can any body tell me what are the table names where we can get the the open delivery document numbers and open billing document numbers?

    HI
    Table S066 (Open orders)
    S067(Open deliveries and billing)
    Those 2 tables helpful only to know the credit exposure not for open deliveries and open billings document numbers
    Solution: Mr.Prakash Already suggested table and field names
    Regards,
    Prasanna

  • Archiving print document and the FICA document is not closed yet

    Hi SAP,
    I Am testing the archiving object ISU_PRDOCL and ISU_PRDOCH and I could archive a print document for which the FICA document is not sold (still Open Item). is it a bug or the standard is made like this or do we have to implement an OSS note for this isue.
    Thanks;
    Best regards
    Raissi Hanane

    Hello,
    Yes, print document will be archived even though corresponding FICA document is still open or outstanding.
    To-over come this problem you can enhance your Print document header and line item archive program to exclude archiving of print document header and line item with corresponding open FICA document.
    SAP has provided enhancement for Print document Archive program :
    Print document headers (ETOAR001)
    Print document line items (ETOAR002)
    Hope this will resolve your issue.
    -Thanks,
    Ajay

  • Difference between Invoice cancellation document and credit note document

    Hello,
    Can anybody highlight the differences between an invoice cancellation document and a credit note document (may be point by point).
    I want to know their difference in SAP point of view.
    Thanks,
    Shankar

    Hi,
    Invoice Cancellation Document (VF11)
    This is basically cancelling-out an existing Invoice, completely.
    Whereas, Credit Note is basically setling down some part payment, which isn't being made or billed in excess to actual invoice amount.
    Example:
    Customer was supposed to be billed with Rs. 100 and got billed with Rs. 110. the payment recieved from customer is Rs. 100. to settle-down oustanding of Rs. 10, one need to create a credit note of Rs. 10 on customer-account.
    Best Regards,
    Amit

  • How to resize a document and its contents?

    I'm having some trouble resizing a single page, and a single part of that page, on my document.
    First the details: My page dimensions are 800 x 1200. On top of that black background, there's textured layer measuring 760 x 130 at the top (for website's name/logo/misson statement) and 760 x 990 below (for site's content and graphics). There are 20 px borders (between textured layer and background) at the top and sides, and 10 px border at the bottom. The 50 px gap between the top and main textured areas is for the navigation bar.
    Now the problem: I want to resize just one page to 800 x 1250 px. And to complicate things, I only want to grow the bottom part by those 50 px, so that that textured layer measures 760 x 1040  (I have to add something to that page's main content, so I don't want to affect the size of either navigation bar or site's name/logo).
    Adobe instructions (http://help.adobe.com/en_US/Fireworks/10.0_Using/WSAE41683F-ED20-4488-9389-79DC28BD7CE0.ht ml) haven't been much help. I go to Modify > Canvas > Image Size, change to 1250 pixels, click off "constrain proportions" and click on "resample image" and "current page only." When I do that, it does enlarge both the black background and the textured layer to the size I want. But it also:
    1. Changes the entire page -- that is, it grows the nav bar and logo areas as well as the main content section.
    and, strangely,
    2. The textured layer on my two dozen other pages grows, but not the black background. In other words, I change both the background and layer size on the page I want to modify, but I inadvertently grow only the textured layer (but not background) on all of my other pages. (So the texture on all of those other pages now spills off the black background.)
    So my question: How can I resize only the main content's background and textured layer on one page? Is it even possible?
    Many thanks to anyone who can help. And my apologies for the lengthy explanation.  But I'm new to webdesign and Adobe Fireworks, and I wanted to be as clear as possible about the problem.
    PS If it matters, I'm using Fireworks CS4

    Thank you, Pixlar. However, I couldn't adjust the rectangle as you suggested, as it was on my master page. That was the problem I was having: Both the canvas and the texture layer I put on it (ie, the rectangle) were on the master page. I wanted to change the dimensions of both canvas and rectangle on only one page. Following Jim's suggestion, I was able to change the canvas, but not the rectangle (at least,not without adjusting the master page, which would have affected the layout of twenty other pages).
    I finally decided to follow your other suggestion: Delete the old one and start over.
    Thank you again for your help. Nice having a forum like this to turn to.

Maybe you are looking for

  • Anyone had a pixel pop, smelled smoke?

    Recently, I turned on my year old Samsung 55" LCD, and heard a few pops, that resulted in pixels deadened and vertical lines distorting the screen.  Then I smelled smoke and turned off the TV.  Geek Squad is coming out to look at the TV soon.  Did an

  • Struggling  Very Hard to compile Servlet

    Sir I have tried all sort to set Class Path for servelet it always give 4 types of error. javax.sevlet.* not found and Httpservlet not found.I am using Win2000 and setting it in the test enviorment. As CLASSPATH c:\javaWebserver2.0\lib\servlet.jar; S

  • Is my iphone locked or unlocked?

    Hi just wanted to ask if my iphone that I bought from istyle in dubai is locked? I tried to insert a sim here in Florida but I think it's not working. What should I do? I've been trying to locate also here in florida if where could I unlock the phone

  • How to make a method sleep without affecting the responsiveness of the GUI

    Hi, I want to make a method sleep for a few second before executing the rest of its body. Apparently Thread.sleep(10000) doesn't do the job as it makes the GUI non-responsive. Any advice would be deeply appreciated. Thomas

  • TT query very slow - solution is simple - hopefully

    Hello I have a simple view on a simple cached Table in the TT. When i run a query on the View - the Query Optimizer Plan sayed " NOT INDEXED:" on one column. The same Query on the OracleDB is faster...;-( Here some Informations... TIMESTEN ==========