Field in a screen doubt
hi all
what does the value like this ___________,__V in the text field of a particular field in the screen attributes means
can anyone tell what it does and what is the purpose. i have seen it in the attributes of a particular field in the screen layout
and its given in the text field
Thanks
kajol
Hi
Iam confused in here little bit
i have a dec data type length 10 and decimals 3 . when i input 3 and press enter , it will give ma avlue of
3.000 and doesnot take any aphabets right.
if iam rightfor the same field i see ___________.__V what s the purpose of this again
and i also see ___________,__V what is the purpose of this.
sorry iam cofused in here little bit.
can you explain
thanks
Similar Messages
-
Month/year input field in selection screen
Hi,
Can anyone tell how to declare an input field in selection screen in the format month/year with out day.
Thanks.
Prasad.hi ,
I have the same doubt ,
but its taking invalid input also as in if i enter 13/2006
Can it be avoided,
also can the calender be displayed at F4 on such field.
Thanks in advance
Regards
Bijal -
Fields missing in Screen 2000 for Infotype 580
Hi,
In PA30, when I go to create or change or display mode for an employee in infotype 580, there are only 4 fields shown. There should actually be over 10 fields in the screen. I checked the layout for the screen 2000 of program MP058000 in SE51 and it had all the fields there. In table T588M there was no entry with the module program name MP058000. I created an entry with this program for screen 2000, and chose the radio button Standard ( The first one) for all the fields that were there and still the screen in PA30 has only 4 fields.
Can anyone please help with this issue?
Additional Info: When i chose create or change for IT0580 in PA30 for an employee, there was a status message saying screen was modified, and that were i got the table name that i've mentioned above.
Thanks & Regards,
Pratheek BhonsleyHi Pratheek,
Please check the hiring date of employee to whom you are trying to enter and check the employee who joined before this financial year. If i am right, this info type screens are depends on hiring date of employee, if i am right..
At the same time, Please check the control record period also.
MVR
Edited by: MVRmvr on Jul 19, 2010 7:43 AM -
Adding new field to MB51 screen output
Hi All,
I need to add a new field TCODE2 from MKPF table on the screen output of MB51. I have added my new field thro SPRO following the below steps:-
Go to SPRO -- MM -- Inventory Management and Physical Inventory -- Reporting -- Define Field Selection for Material Document List
Here I have give
RM07DOCS MKPF TCODE2 Transaction code -- output box checked
and saved.
Now I tried to re-execute the transaction MB51 but not able to see the Tcode2 on the output screen .
Can any one help me out, if I am missing out something or is there any thing else i need to check on the ALV output to see the field TCODE2 on the screen og MB51?
Regards
Shilpa.Hi,
Check these notes:
Note 357187 - MB51: Fields in field catalog / selection screen
Note 828104 - Enhancing MB51 for AFS
I hope this helps you
Regards
Eduardo -
How can i post the fields in the screen by selecting a record
Hi,
I have a problem in dialog programming.
I need to populate the fields in the screen by selecting a single record.
For example,
Screen consists of 'CARRID, CONNID,FLDATE... fields.
By pressing F4 in CARRID field it will display the contents from database table and display the records. If i select the record LH 0400 ... record then automatically the connid field should fill with the contents of the record i.e., 0400 and similarly the remaining fields.
How can i do this in dialog programming?
I tried with F4IF_INT_table_.. function module. There is a table parameter DYNmapping. But dont know how to use it? Can any body explain me how to use it?
Thanks in advance..
SuvanHi Vinod,
Thanks for your reply. I solved my problem. It is working with the table parameter 'DYNPFLD_MAPPING' in the function module 'F4IF_INT_TABLE_VALUE_REQUEST'.
With your logic we can't decide which record is selected. Because there can be multiple records for a single CARRID.
My question is how to post the entire record into the screen fields at a time? It is possible with the parameter I specified inthe above said function module.
With dictionary reference it will fetch the entire entries from the Check table.
Thanks again for your co-operation.
Suvan.<b></b> -
How can I add a new field in selection screen for this report
*& Report ZGS_BARKODLA_HIZLI_GIRIS
report zgs_barkodla_hizli_giris.
tables: mara,
mseg,
mch1,
*mch1,
mkpf,
mchb ,
makt.
type-pools: esp1.
data: i_message_tab type esp1_message_tab_type,
wa_message_tab type esp1_message_wa_type ,
sc_count type i.
ALV
type-pools: slis, kkblo.
data: gs_layout type slis_layout_alv ,
gt_fldcat type slis_t_fieldcat_alv with header line,
gt_header type slis_t_listheader with header line,
gt_sortin type slis_t_sortinfo_alv with header line,
g_repid like sy-repid .
define add-fieldcat.
gt_fldcat-fieldname = &1.
gt_fldcat-ref_tabname = &2.
gt_fldcat-seltext_s = &3.
gt_fldcat-seltext_m = &3.
gt_fldcat-seltext_l = &3.
gt_fldcat-reptext_ddic = &3.
gt_fldcat-ddictxt = 'M'.
append gt_fldcat.
clear gt_fldcat.
end-of-definition.
types: begin of titab,
sel type xfeld,
matnr type matnr,
maktx type maktx,
charg type charg_d,
menge type menge_d,
erfmg type erfmg,
end of titab.
data : witab type titab.
data : itab type table of titab.
data : ok_code type sy-ucomm.
controls: tc_itab type tableview using screen 0100.
data: gv_header like bapi2017_gm_head_01,
gv_code like bapi2017_gm_code.
BAPI export parameters
data: gv_headret type bapi2017_gm_head_ret,
gv_matdoc type bapi2017_gm_head_ret-mat_doc,
gv_matyear type bapi2017_gm_head_ret-doc_year.
data : lv_objek like inob-objek .
data : ls_inob like inob .
data : imseg type ty_t_mseg.
data : wmseg type mseg.
data : answer.
data : count type i.
data : v_atinn type atinn.
BAPI movement details
data: i_goodsmvt_items type bapi2017_gm_item_create occurs 0
with header line.
data: i_return type bapiret2 occurs 0 with header line.
start-of-selection.
call function 'CONVERSION_EXIT_ATINN_INPUT'
exporting
input = 'Z_ORAN'
importing
output = v_atinn.
call screen 100.
*& Module status_0100 OUTPUT
module status_0100 output.
set pf-status '100'.
set titlebar '100'.
mseg-werks = 1000.
mseg-umwrk = 1000.
**added
sc_count = sc_count + 1.
if sc_count eq 1.
mseg-bwart = 313.
endif.
mkpf-budat = sy-datum.
**added
describe table itab lines tc_itab-lines.
endmodule. " status_0100 OUTPUT
*& Module user_command_0100 INPUT
module user_command_0100 input.
data field(20).
data: line_t like sy-index.
data: lines like sy-index.
data line_count like sy-loopc.
data: begin of cols,
screen like screen,
index type i,
selected(1) type c,
vislength like icon-oleng,
invisible(1) type c,
end of cols.
case ok_code.
when 'DELE'.
delete itab where sel eq 'X'.
when 'ENTE'.
check *mch1-charg is not initial.
read table itab into witab with key charg = *mch1-charg.
if not sy-subrc is initial.
witab-charg = *mch1-charg.
select single matnr from mch1 into witab-matnr
where charg eq witab-charg.
if not syst-subrc is initial.
set cursor field '*MCH1-CHARG'.
message e115(12) with *mch1-charg.
endif.
select single maktx from makt into witab-maktx
where matnr eq witab-matnr
and spras eq syst-langu.
witab-erfmg = 1.
concatenate witab-matnr witab-charg into lv_objek .
clear ls_inob .
select single * into ls_inob
from inob
where objek = lv_objek and
klart = '023' and
obtab = 'MCH1' .
select single atflv from ausp into witab-menge
where objek = ls_inob-cuobj and
klart = '023' .
append witab to itab.
**added
clear *mch1-charg.
**added
endif.
when 'SAVE'.
if mkpf-budat is initial.
set cursor field 'MKPF-BUDAT'.
message e055(00).
endif.
if mseg-lgort is initial.
set cursor field 'MSEG-LGORT'.
message e055(00).
endif.
if mseg-umlgo is initial.
set cursor field 'MSEG-UMLGO'.
message e055(00).
endif.
if mseg-bwart is initial.
set cursor field 'MSEG-BWART'.
message e055(00).
endif.
refresh imseg.
loop at itab into witab.
move-corresponding witab to wmseg.
append wmseg to imseg.
endloop.
call function 'ZMM_POPUP_WITH_DATA'
exporting
imseg = imseg
importing
answer = answer.
if answer eq 'Y'.
perform create_goods_movement.
endif.
when 'P--'.
clear ok_code.
perform paging using 'P--'.
set cursor field 'MARA-MATNR' line 1.
when 'P-'.
clear ok_code.
perform paging using 'P-'.
set cursor field 'MARA-MATNR' line 1.
when 'P+'.
clear ok_code.
clear lines.
perform paging using 'P+'.
set cursor field 'MARA-MATNR' line 1.
when 'P++'.
clear ok_code.
perform paging using 'P++'.
set cursor field 'MARA-MATNR' line 1.
when 'SORA'.
read table tc_itab-cols into cols with key selected = 'X'.
if sy-subrc is initial.
field = cols-screen.
field = field+5(10).
sort itab ascending by (field).
endif.
when 'SORZ'.
read table tc_itab-cols into cols with key selected = 'X'.
if sy-subrc is initial.
field = cols-screen.
field = field+5(10).
sort itab descending by (field).
endif.
when 'PRNT'.
perform write_alv.
endcase.
endmodule. " user_command_0100 INPUT
*& Module read_table OUTPUT
module read_table output.
mara-matnr = witab-matnr.
makt-maktx = witab-maktx.
mch1-charg = witab-charg.
mseg-menge = witab-menge.
mseg-erfmg = witab-erfmg.
line_count = sy-loopc.
endmodule. " read_table OUTPUT
*& Module write_table INPUT
module write_table input.
witab-matnr = mara-matnr.
witab-maktx = makt-maktx.
witab-charg = mch1-charg.
witab-menge = mseg-menge.
witab-erfmg = mseg-erfmg.
modify itab from witab index tc_itab-current_line.
endmodule. " write_table INPUT
*& Module exit INPUT
module exit input.
leave to screen 0 .
endmodule. " exit INPUT
*& Form create_goods_movement
form create_goods_movement .
clear : gv_header, i_return[], i_goodsmvt_items[].
gv_header-doc_date = gv_header-pstng_date = mkpf-budat.
gv_header-pr_uname = sy-uname.
GM with reference to reservation
loop at itab into witab.
i_goodsmvt_items-material = witab-matnr.
i_goodsmvt_items-entry_qnt = witab-erfmg.
i_goodsmvt_items-entry_uom = 'ST'.
i_goodsmvt_items-move_type = mseg-bwart.
i_goodsmvt_items-plant = mseg-werks.
i_goodsmvt_items-stge_loc = mseg-lgort.
i_goodsmvt_items-move_plant = mseg-umwrk.
i_goodsmvt_items-move_stloc = mseg-umlgo.
i_goodsmvt_items-batch = witab-charg.
append i_goodsmvt_items.
endloop.
find BAPI processing transaction
if gv_code is initial.
perform determine_bapi_code using mseg-bwart
changing gv_code.
endif.
call function 'BAPI_GOODSMVT_CREATE'
exporting
goodsmvt_header = gv_header
goodsmvt_code = gv_code
importing
goodsmvt_headret = gv_headret
materialdocument = gv_matdoc
matdocumentyear = gv_matyear
tables
goodsmvt_item = i_goodsmvt_items
return = i_return[].
cancel blocking process
loop at i_return where type eq 'E' or type eq 'A' or type eq 'X'.
exit.
endloop.
if sy-subrc ne 0.
refresh i_message_tab.
call function 'BAPI_TRANSACTION_COMMIT'
exporting
wait = 'X'.
wa_message_tab-msgid = 'M7'..
wa_message_tab-msgty = 'S'.
wa_message_tab-msgno = '060'.
wa_message_tab-msgv1 = gv_matdoc.
wa_message_tab-msgv2 = ''.
wa_message_tab-msgv3 = ''.
wa_message_tab-msgv4 = ''.
append wa_message_tab to i_message_tab.
else.
refresh i_message_tab.
call function 'BAPI_TRANSACTION_ROLLBACK'.
write a message as there is an unexpected error.
loop at i_return.
wa_message_tab-msgid = i_return-id.
wa_message_tab-msgty = i_return-type.
wa_message_tab-msgno = i_return-number.
wa_message_tab-msgv1 = i_return-message_v1.
wa_message_tab-msgv2 = i_return-message_v2.
wa_message_tab-msgv3 = i_return-message_v3.
wa_message_tab-msgv4 = i_return-message_v4.
append wa_message_tab to i_message_tab.
endloop.
endif.
call function 'C14Z_MESSAGES_SHOW_AS_POPUP'
tables
i_message_tab = i_message_tab.
endform. " create_goods_movement
*& Form determine_bapi_code
form determine_bapi_code using p_bwart type bwart
changing p_code type bapi2017_gm_code.
data: lt_t158b type table of t158b with header line.
clear p_code.
select tcode from t158b into corresponding fields of table lt_t158b
where bwart eq p_bwart.
loop at lt_t158b.
select single gmcode from t158g into p_code
where tcode eq lt_t158b-tcode.
if sy-subrc is initial.
exit.
endif.
endloop.
endform. " determine_bapi_code
*& Form paging
form paging using code.
data: i type i,
j type i.
case code.
when 'P--'. tc_itab-top_line = 1.
when 'P-'.
tc_itab-top_line = tc_itab-top_line - line_count.
if tc_itab-top_line le 0.
tc_itab-top_line = 1.
endif.
when 'P+'.
i = tc_itab-top_line + line_count.
j = tc_itab-lines - line_count + 1.
if j le 0.
j = 1.
endif.
if i le j.
tc_itab-top_line = i.
else.
tc_itab-top_line = j.
endif.
when 'P++'.
tc_itab-top_line = tc_itab-lines - line_count + 1.
if tc_itab-top_line le 0.
tc_itab-top_line = 1.
endif.
endcase.
endform. " paging
*& Form write_alv
form write_alv .
perform find_list_header.
perform fill_field_cat.
perform fill_sortinfo.
g_repid = sy-repid.
gs_layout-colwidth_optimize = 'X'.
gs_layout-zebra = 'X'.
answer = 'Y'.
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
i_buffer_active = ''
i_callback_program = g_repid
i_save = 'A'
i_callback_top_of_page = 'TOP_OF_PAGE'
is_layout = gs_layout
it_fieldcat = gt_fldcat[]
it_sort = gt_sortin[]
tables
t_outtab = itab[].
endform. " write_alv
Form find_list_header
form find_list_header.
data : v_datum(10),
v_datlo(10),
v_dathi(10),
v_uzeit(8).
clear: gt_header, gt_header[].
gt_header-typ = 'H'.
gt_header-info = sy-title.
append gt_header.
clear gt_header.
gt_header-typ = 'S'.
gt_header-key = 'Çalıştırma Zamanı : '.
write syst-datum to v_datum.
write syst-uzeit to v_uzeit.
concatenate v_datum '/' v_uzeit into gt_header-info.
append gt_header.
endform. " find_list_header
Form fill_field_cat
form fill_field_cat.
refresh gt_fldcat.
clear gt_fldcat.
gt_fldcat-key = 'X'.
add-fieldcat 'MATNR' 'MARA' ''.
add-fieldcat 'MAKTX' 'MAKT' ''.
add-fieldcat 'CHARG' 'MSEG' ''.
gt_fldcat-do_sum = 'X'.
add-fieldcat 'MEINS' 'MARA' 'Olcu Birimi '.
gt_fldcat-do_sum = 'X'.
add-fieldcat 'ERFMG' 'MSEG' 'Adet'.
endform. " fill_field_cat
Form fill_sortinfo
form fill_sortinfo.
gt_sortin-up = 'X'.
gt_sortin-fieldname = 'MATNR'. append gt_sortin.
endform. " fill_sortinfo
Form top_of_page *
form top_of_page.
call function 'REUSE_ALV_COMMENTARY_WRITE'
exporting
i_logo = 'ZKUTAS'
it_list_commentary = gt_header[].
endform. " top_of_pageHI,
if it is a normal report program then you can directly create a Selection screen field.
After the Type-pool you can use Parameters or Select-options to create the selection screen field..
If it is a Modulpool program then you can create a selection scren field like
SELECTION-SCREEN BEGIN OF SCREEN 1100 AS SUBSCREEN.
PARAMETERS: p1(10) TYPE c.
SELECTION-SCREEN END OF SCREEN 1100.
defines a selection screens 1100 as subscreens.
The next screen number of screen 100 is 100 (statically-defined).
PROCESS BEFORE OUTPUT.
MODULE status_0100.
CALL SUBSCREEN area INCLUDING sy-repid number.
PROCESS AFTER INPUT.
MODULE cancel AT EXIT-COMMAND.
CALL SUBSCREEN area.
MODULE user_command_0100.
look at the below link
http://help.sap.com/saphelp_nw2004s/helpdata/en/e7/deb237b9a9a968e10000009b38f8cf/content.htm
Regards
Sudheer -
Hi All,
How would u hide a row of fields in a screen based on a condition ?
Thanks in advance
Archana.Hi Archana,
All screen modifications are generally done in the PBO. If you have three elements on the screen, say P_ONE, P_TWO and P_THREE, then in the PBO, you will have something like this -
IF <the condition you want to check>.
LOOP AT SCREEN.
IF ( SCREEN-NAME EQ 'P_ONE' OR
SCREEN-NAME EQ 'P_TWO' OR
SCREEN-NAME EQ 'P_THREE' ).
SCREEN-ACTIVE = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.
The PBO for a selection screen would be the AT SELECTION-SCREEN OUTPUT event, while for a normal screen, it can be any of the PBO Modules.
Regards,
Anand Mandalika. -
Hiding fields in a screen using BADI
Hi Experts
I want to invisible certain fields in the screen for certain users and it should be made visible for certain users,the requirement is to do with badi.Can anyone help me regarding this issue.
Thanks & Regards
PravithaUse (or Create) authorization [field|http://help.sap.com/saphelp_nw04/helpdata/en/52/67168c439b11d1896f0000e8322d00/frameset.htm] and [object|http://help.sap.com/saphelp_nw04/helpdata/en/52/6716a6439b11d1896f0000e8322d00/frameset.htm], in the BAdI [check this authorization|http://help.sap.com/abapdocu_70/en/ABAPAUTHORITY-CHECK.htm] and change the INVISIBLE field and not the ACTIVE field in SCREEN structure.
- [Programming Authorization Checks|http://help.sap.com/saphelp_nw04/helpdata/en/52/6712ac439b11d1896f0000e8322d00/frameset.htm]
Inform system admin to manage those new object and field in the user roles. ([SAP Authorization Concept Modules|http://help.sap.com/saphelp_banking463/helpdata/en/5c/deaa74d3d411d3970a0000e82de14a/frameset.htm])
Regards,
Raymond
NB: The "d" of BAdI should always been in lowercase, except in statement GET BADI... -
How can i declare a single radio button field in selection-screen ?
How can i declare a single radio button field in selection-screen ?
>
Rob Burbank wrote:
> And how will you turn it off once it is turned on??
>
> Rob
Thats correct ;)...See ravi if users will ask so many things its our Job to convay the correct solution ....
Just post your org requirement..SOo some body guide you better//
Sas -
Process to add new field to Account screen and update value from R/3...
We have CRM 7 and just wanted to ask what the process would be to add a new field to the Accounts screen. This field will be a read-only field and we'll source its value from R/3, based on some of the other data entered into the Accounts screen.
What exactly is involved in this process?.
I think I can use the new Application Enhancement Tool instead of EEWB to create the new field, but how does one identify which structure/table to change for say the 'Accounts' data, and, where does one place the code which populates this field, and, once the structure has been changed how do I physically add the field to the screen. I should be okay with reaching out to R/3 and populating the data, code-wise, but again wondered if there was anything inbuilt to do this, bearing in mind the closeness and constant access to R/3 from CRM.
Any help would be much appreciated.
Jason
Edited by: Jason Stratham on Apr 14, 2010 1:11 PMJason,
If you use EEWB or AET,, there is nothing manual you have to do, the fields will be added to all related tables and structures plus UI too.
May be sometimes you have to run the UI configration tool to add the field to the UI, again this is just a tool, there is not manual coding required.
you can enter the value for the fields direclty via UI, BUT if it is a display only field, at the time of save, you have to write couple of line to populate this field ( see set_property( ) method in the context node ).
Thats it...
Regards, Sudeep.. -
Creation of custom field on BId screen And send this data to backend in PO
HI Expert,
I have to add custom field on bid item data. I have did this and able to see this field on bids screen.
the scenario is like once bid is accepted it will create PO in backend.
now i need to carry the data from this custom field to backend PO.
please give me the solution if it possible. we are using classic scenario.
thanks in advance.thanks for reply
I have did same thing but in input parameter of bado i am getting the shoping cart GUID . form which how i can get the Bid detail.
and other part is I need to send data by extension this this how we can do ?
do we need to write code in backend also and need to create custom field in backend PO table.
Thaks for reply -
Search help for input fields in a screen
Hi,
Pls help me
how to set search help property for the I/O fields in screen in se80?
1. do we want to add any property for search help in the property window?
2.do we want to create a MODULE PROCESS ON VALUE REQUEST ?
PLS tell me how to set search for the I/O field in se80?pls tell me the process?
i want to set the search help for more I/O fields in se80 but all the fields belongs to the same table?
can i create a single search for all these fields and use that for all the I/O fields ?
elementary search help or collective search help?
thanks & regards in advance,
vsnl.Hi,
Input Help on the Screen
Within the Screen Painter, you can define two types of input help:
1. The FIELD statement with one of the additions VALUES or SELECT.
2. Linking a search help directly to a screen field.
If you link a search help directly to a screen field, it overrides the additions of the FIELD
statement. However, the input check [Page 581] functions of the FIELD statement remain
unaffected.
Input Help in Flow Logic
The following input help methods are obsolete and should not be used. They are still supported
for compatibility reasons.
In the screen flow logic, you can specify a value list for a screen field <f> as follows:
FIELD <f> VALUES (<val1>, <val2>,...).
The value list contains a series of single values <vali>. The NOT and BETWEEN additions for the
input check [Page 581] are not appropriate for input help.
You can also create a value list by accessing a database table as follows:
FIELD <f> SELECT *
FROM <dbtab>
WHERE <k1> = <f1> AND <k2> = <f2> AND...
In the WHERE condition, the fields of the primary key <ki> of the database table <dbtab> are
checked against the screen fields <fi>. The WHENEVER addition, used with input checks [Page
581], is not necessary for input help.
If you have used a ABAP Dictionary reference for field <f>, the selection and the hit list formatting
may be affected by any check table attached to the field.
Attaching a Search Help
Search helps from the ABAP Dictionary can be attached to a screen field [Ext.]. To do this, enter
the name of the search help in the corresponding field in the attributes of the screen field in the
Screen Painter. This assigns the first parameter of the search help to the screen field. It is only
possible to place a value from the hit list onto the screen.
Input help on a screen.
REPORT DEMO_DYNPRO_F4_HELP_DYNPRO MESSAGE-ID AT.
DATA: CARRIER(3) TYPE C,
CONNECTION(4) TYPE C.
CALL SCREEN 100.
MODULE CANCEL INPUT.
LEAVE PROGRAM.
ENDMODULE.
The next screen (statically defined) for screen 100 is itself. It has the following layout:
602 April 2001
Cancel
Airline
Flight number
Screen field with search help
Input help in the flow logic
The input fields have been adopted from the program fields CARRIER and
CONNECTION. The function code of the pushbutton is CANCEL, with function type
E. The search help DEMO_F4_DE with the search help parameter CARRID is
assigned to the screen field CARRIER. The search help uses the database table
SCARR.
The screen flow logic is as follows:
PROCESS BEFORE OUTPUT.
PROCESS AFTER INPUT.
MODULE CANCEL AT EXIT-COMMAND.
FIELD CARRIER VALUES ('AA', 'LH').
FIELD CONNECTION SELECT *
FROM SPFLI
WHERE CARRID = CARRIER
AND CONNID = CONNECTION.
When the user chooses the input help for the individual fields, the following input
help is displayed:
For the Airline field, the search help displays the names of the airlines and places the airline
code in the input field for the chosen line. If the airline code is not one of those listed in the
VALUES list of the screen flow logic, the input check triggers an error message in the PAI
event. So the search help overrides the VALUES addition for the input help, but not for the
input checks. This is therefore not an appropriate place to use the VALUE addition.
For the Flight number field, the flow logic displays the selected entries from the database
table SPFLI and places the selected line in the input field.
Regards,
Bhaskar -
How to add fields in VA11 screen?
Hello ABAPers,
I want to add one field in inquiry form(VA11) can anybody give the steps to add a field in VA11 screen.
I found tht user exit V45A0002 is used to add extra field. Is tht right i am totally new to the enhancements. Please provide me the steps.
And i want to change the standard text name of VA11 too for tht wht steps i have to follow.
Points will be deffinetly rewarded for the helpful answers.
Waiting for all your replies...
ThksHello,
I do not know the either user exit or BAdi for FP03. However I can suggest you a work around.
You can add an addl tabstrip in FPE2/FPE2M. This is possible by adding an addl field say 'ZZ' in tables DFKKOP/DFKKCOLL/DFKKCOLLH.
<also pls look into OSS Note 851023>
So when ever an item is submitted to collection agency, this field should be updated.
Hope this helps
Rgds
Rajendra -
Is it possible to add a field in Attachment screen?
Hello Exports,
I wan to know is it possible to add a customer field in Attachment screen (Project, RFx,MA, A) . As there are a lots of attachments added in normal working in various documents like project,MA,RFX etc, so whether can add a field to categorize the attachment like it is project added attachments or RFx add attachment?
Would appreciate your comments.
Thanks & Regards,
DavidHello,
On a transfer, the accounting treatment is different when the move is within the same division VS when it goes to another division.
When plant 1101 ships to plant 1102, we donu2019t want to post to account 360100. When plant 1101 ships to plant 1301, we do want to post to 360100. Having the receiving profit center group in the mix will enable this distinction.
Thanks in advance -
Hi ,
There is a requirement to add a new field in MIRO screen.
I mean that a new field needs to be made visible.
Please let me know of how to proceed with it in SPRO.
ThanksHi,
maybe this can help you:
https://wiki.sdn.sap.com/wiki/display/Snippets/Displaycustomerfieldsinheaderoflogisticsinvoiceverification+transactions
Best regards.
Maybe you are looking for
-
How can I remove all JavaScript content from a form created in Adobe LiveCycle ES?
Dear all, I have created a form from scratch (blank A4) that doesn't have any events with scripts. Nevertheless I still get the usual error message in Adobe Reader where we have disabled JavaScript: In Acrobat Pro 9 I can see 3 document level scripts
-
Hint Caption Stays After Navigating Back
I've read all the previous posts, but I'm not as easy to please as everybody else I guess. This seems like perfectly reasonable functionality to me and there has got to be some kind of work-around. The problem as most of you already know is that with
-
Singleton node and non singleton practical scenario
Hi Friends, Iam totally confused with singleton and non singleton node implementation please explain practical implementation on singleton and nonsingle ton node . In which scenario non single ton node is used. Thanks in advance Prasad
-
is there a way to get the "Get Info" option on CTRL-CLICK (or right click) to display more info than it does? The imac is supposed to be a Media friendly computer and I feel that the lack of Info on clicking Get Info" is seriously lacking in standard
-
ITunes Shuts Down when Loading Videos
I have a 120 gig iPod Classic, and just recently I started having problems with it. Now whenever I try to load a movie from iTunes to my iPod, iTunes shuts down right when the video is almost done loading onto my iPod. I have no problems with music,