Field in asset Master data "Planned retirement on / control

Hi all,
I would like to know how to deactivate the control for the field "Planned retirement on"?
The control is the following "Simulate only to planned retirement" indicator in the selection screen of the given standard report.
Where can I found this indicator?
Thanks for your help!
Cheers,
Karim

Hi Karim
You can go through the steps below to customize the field u2018Planned. retirement onu2019
1, AS02 -> Menu: Environment -> screen layout -> Master data -> select layout and double click on Logic field group -> Select Logic field group 2 u2018Posting informationu2019 and double click on field group rules -> Change field group 13 to u2018Suppressed entry fieldu2019.
Alternatively
2, Use AO21 to customize the field as above.
Note: field u2018Planned. retirement onu2019 in asset master is connected to the function u2018Simulate up to planned retirement dateu2019 in asset reports. After field u2018Planned. retirement onu2019 of asset master data is deactivated, the function u2018Simulate up to planned retirement dateu2019 in asset report will be disabled.
Hope itu2019s helpful
George

Similar Messages

  • Custom Field in Asset Master Data

    Dear Experts,
    I want to ask about a problem I'm having when adding a new field in Asset Master Data ( AS01 & AS02 ).
    I'm adding new field on the Time-dependent Tab. I already create the exit & the new custom field, and with the help of the functional registered the new field.
    I'm using a new installed SAP GUI 7.3 .
    The problem is that the new field doesn't appear when I access the tcode unless I click on the new field location.
    The problem seem doesn't appear in SAP GUI 7.1 & 7.2.
    Is there any setting that need to be done or this is the problem with the SAP GUI 7.3
    Thank you.

    Hi Karim
    You can go through the steps below to customize the field u2018Planned. retirement onu2019
    1, AS02 -> Menu: Environment -> screen layout -> Master data -> select layout and double click on Logic field group -> Select Logic field group 2 u2018Posting informationu2019 and double click on field group rules -> Change field group 13 to u2018Suppressed entry fieldu2019.
    Alternatively
    2, Use AO21 to customize the field as above.
    Note: field u2018Planned. retirement onu2019 in asset master is connected to the function u2018Simulate up to planned retirement dateu2019 in asset reports. After field u2018Planned. retirement onu2019 of asset master data is deactivated, the function u2018Simulate up to planned retirement dateu2019 in asset report will be disabled.
    Hope itu2019s helpful
    George

  • How to display field Functional Location Field in Asset Master Data

    Dear Experts,
    I really appreciate for your advices on how to display Functional Location Field in Asset Master data.
    I have checked the configuration on path IMG:\Financial Accounting->Asset Accounting->Master Data->Screen Layout->Define Screen Layout for Master Data
    I have chosen the screen layout and review all Logical Field Groups. And there's no field "Functional Location" is available. I also didn't find "Add New" button to add "Functional Location" field.
    Thank you
    Best regards,
    Frans

    Dear Frans,
    I am sorry this is not possible.
    Note 140482:
    The field was created as a precaution. However, it is not being used at 
    present and consequently is not supplied.                               
    In particular, you cannot use the field as a criterion for a selection  
    in Asset Accounting reporting. This is still true even if this field has
    been included in the selection view delivered for the dynamic selections
    by modification.                                                        
    regards Bernhard

  • How to add new fields in asset master data

    Hello,
    i was wonder if anyone knows how to add new fields that arent defined in the asset master data.
    Thanks.
    Pedro

    Hi Pedro,
    SAP allows entering upto 8 fields on the asset master. These fields are called 'Evaluation group'. Out of 8, 4 are four character long and others are 8 character long.
    You can configure them @ the following 3 nodes in IMG:
    Financial Accounting>Asset Accounting>Master Data-->User Fields: Define 4-Character Evaluation Groups & Define 8-Character Evaluation Groups & Change Key Words in the Evaluation Groups.
    Regards,
    Vishal Thakur

  • Useful life is asking mandatory field in asset master data

    while asset master creation useful life is asking mandatory field in dep.key : ZSLU. actually i have to give "ZERO" in useful life field. i have set screen layout in AO21 also.again asking mandatory field. I got the one point, I think this is the problem,
    Note: Base method 0011 (Ordinary: percentage from useful life) already assigned in dep. Key ZSLU. If we assigned in dep. key ZSLU, we should give positive values for useful life in asset master data.
    I changed base method 0002 instead of 0011, it was accepted, If i change base method(0011),
    i want base method instead of 0011?
    which base method i have to give? please give suggestion?
    Thanks
    indu

    Hi ,
    i have changed optional field also. it's asking mandatory, i have tested base method 0002 instead of 0011. if i give 0002 or other base method, it is accepting.
    Note: if we mention base method 0011, we must give passitive values in useful life.
    what i have to do? please tell me?

  • Best practice for "Quantity" field in Asset Master

    Hi
    I want to know what is the best practice for "Quantity field" in asset master. It should be made displayed only or required field in Asset Master creation.
    Initially I made this field as required entry. So user entered 1 quantity. At the time of posting F-90, he again entered quantity. So my quantity in asset master got increased. Hence i decided to make that field display only in asset master creation.
    Now i made that field as display only in asset master creation. At the time of posting F-90, that quantity field is not coming only. I check my field status group for posting key as well as GL account. Its optional field. Inspite of that user is able to make entry in F-90. Now quantity field is '0' only in asset master even though there is some value in asset.
    Please help what is the best practice wrt quantity field. Should be open in asset master or it should be display only.

    Hi:
               SAP Standard does not recommend you to update quantity field in asset master data.  Just leave the Qty Field Blank , just mention the Unit of Measure as EA. While you post acquisition through F-90 or MIGO this field will get updated in Asset master data automatically. Hope this will help you.
    Regards

  • How to activate fields under origin tab in the asset master data

    Hello Gururs,
        While creating asset master data under origin tab there are two fields in display mode . I am unable to change these fields . the fields are 1.) Asset purchase new.   2.) Purchase used. I want to check one of these two check boxes. But they are in display mode. How can i activate these two fields.
    In asset master data screen layout also i didnot find these two fields under origin category . Pls advice
    regds
    Ramachandra

    Hello Markus ,
    Thanks for your reply. I checked through Group box info then system is showing the following message .
    status - DISPLAY
    Reason - Authorization for asset view used
      In screen layout field i didnt find these two fields . Can you tell me where these settings has been done . How to change the status for these fields.
    regds
    ramachandra

  • Add field group to Asset Master Data Screen Layout

    Hi Gurus !!
    Does anybody know how to add field group in SPRO(Define Screen Layout for Asset Master Data)?. I have created my layout by coping 1000, but then I need to add Fund Center in Time-Dependent data logical field group.
    Thanks a lot,
    Sasha

    I don't think you can add a funds center to the Time dependent tab.
    Instead you need to use Derivatuon strategy. Use tcode FMDERIVE for strategy and FMDERIVER for GL accounts to cost center and cost centers to asset numbers or number range. From here the system derives teh funds center.

  • Displaying Evaluation groups field in the asset master data

    Dears,
    The Evaluation group fields in the allocation tab in the asset master data was not displayed in the layout, is there is any harm of displaying it in the production system after 3 years from Go-live.
    i think it should not make any harm, i just want to confirm.
    Regards,
    Ahmed Samir

    Salam Ahmed
    There is no harm.. These fields are used for reportng. They dont impact the process in any way
    Br, Ajay M

  • Trading partner' field (ANLA-VBUND) on asset master data

    Dear experts,
    I have informed field Trading partner' (ANLA-VBUND) on asset master data but we have notice that, in our system, it has not got any function on an accounting level.
    Trading partner is not informed in documents like:
    CR - Loss
    DB - Asset account (with trading partner informed on asset's master data)
    We only get trading partner informed in postings like:
    CR - Vendor with trading partner informed in vendor's master data.
    DB - Asset account
    By the way, although trading partner is informed on asset's master data, trading partner is not informed on depreciation postings.
    At the end, I think that my expectations around the functionality derived on field Trading partner' (ANLA-VBUND) on asset master data are not correct. I could not found any SapNote or SapHelp regarding this question.
    Does any body knows what is the functionality of field Trading partner' (ANLA-VBUND) on asset master data?
    Thanks in advance

    Dear Brigitte,
    Thanks for your answer. Looking to the documentation you mentioned above I've found the following:
    AA/Asset Accounting
        * Asset transfers between company codes: If a fixed asset is transferred to another company code, two posting documents are required - one for each company code. The trading partner of each document must be set with the company ID of the other company code, respectively.
    In my understanding there is no functionality regarding trading partner on asset master data level apart of transfers between company codes. Am I right?
    I understand that my initial approach was not correct.
    Regards

  • Modify fixed asset master data thru migo

    Hi experts,
    I make PO with account assigment 'fixed asset'. This asset is created during the PO creation. When materials arrive more fields of that fixed asset master data are known (ie serial number). I'd like to have a way to save those data in asset during the GR without using 2 different transactions.
    In MIGO t/c i see the fixed asset number and double clicking on it i access to display asset: master data (as i was on AS03 tc).
    Do you think a way to call AS02 (change asset master data) thru MIGO exists?
    Best regards,
    Ruben

    Hi Ruben,
    Did you find a solution to your problem? I have a similar requirement.
    I was planning on using the user-exit MBCF0005 to call a pop-up screen where the user can input the serial number and from there calling the BAPI to update the asset.
    Cheers
    Wayne

  • Addition of field in asset master record

    Dear All:
                  I want add a field IN HOUSE PRODUCTION in asset master data creation, Moreover i want to add a field of Iniatiator in Asset master data. Please guide where should i go in SPRO. Waiting for your reply.
    Regards
                  Atif

    You can use for this the User Fields in the asset masterdata
    Financial Accounting / Asset Accounting / Master Data / User Fields
        Define 4-Character Evaluation Groups
        Define 8-Character Evaluation Groups
        Change Key Words in the Evaluation Groups
        Develop Enhancement for User Fields in Asset Master Record

  • How to validate a field in Asset master?

    Hi,
    I have requirement like need to validate field ANLA-TYPBZ,
    Data uniquely passing to this field, i need to check whether data already exist or not while creating asset master using AS01 transaction.
    eg: suppose ANLA-TYPBZ = 12345' entry is there in the table, if i tried to post the data using AS01 as '12345', it should give error message.
    Thanks.

    hi,
    Follow the below steps:
    1. create a validation in GGB0 at node Assets - > Master Data
    2. create a routine in program where these validations were written. It is a copy from RGGBR000
    3. activate validation: append a record in transaction OACV
    http://wiki.sdn.sap.com/wiki/display/ERPFI/Validations
    Regards
    Alok
    Edited by: alpatr on Nov 21, 2011 8:12 AM

  • How to put equipment no. in Asset master data  (manulaly)

    Hi Guru
         I have implement Asset module and link asset no. to equipment no. come from  Plant maintenance module. How I can put the equipment no. in field  equipment number / Tab Allocations  in Asset master data .  How I can do?
    thank you very much

    Hi
    You must have selected 'No synchronize' in Asset accounting for automatic equipment creation view-Specify Conditions for Synchronization of Master Data.
    If you wish to assign equipment to Asset after creation of equipment that means you have equipment number with you which is not assigned to any of the Asset and now you want to assign this to Asset master .
    Please go to IE02 and go to Organisation tab, here you need to assign your desired asset and save it.
    Now go to As03 and see allocation tab, you will find the assigned equipment number here.
    If you wish to let system assign equipment number automatically then please the settings in SPRO Asset accountingMasterdata - Specify Conditions for Synchronization of Master Data-Specify Conditions for Synchronization of Master Data to direct synchronization after savings, then you will not be required to assign equipment number manually, as soon as you will create an asset it will create equipment master as well for that asset and you can see in allocation tab, you can also deleat an equipment master if you don't want to create equipment master for a particular asset before saving the asset record.
    Cheers
    Mukta

  • Nessessary  Field  Required in Master Data to  run Of MRP

    Dear All
    As Per The Requirement of  MRP Whats the nessessary  Field fillup in Master  Data Of a Particular Finished Product & Also Raw Material.
    Thanks
    Pankaj Agarwal

    Hi Pankaj,
    For MRP Type PD, other important fields for MRP are
    MRP1
       - Lotsize
       - MRP Controller (Reporting purpose)
       - MRP Group (Generally not a mandatory field) but certain parameters can be defaulted in configuration for an MRP group.
    MRP2
      - Procurement type
      - Special Procurement type (if special planning process is going to be used)
      - Inhouse Prodn / Planned delivery time
      - Schedule margin key
      - Safety Stock details if safety stock is planned for material
    MRP3
    - Strategy Group
    - Consumption mode and Forward consumption and Backward consumption details if it is a MTS strategy used.
    - Availability check (Group)
    MRP4
      - BOM Selection method
      - Individual and Collective indicator
    Hope this helps....Reward your points....,
    Regards,
    Prasobh

Maybe you are looking for

  • Problems with sockets and hex code

    When i try to send 0x9d on socket, it send 0x3f. Why? conexion = new Socket("server", 0000); escritura = new PrintWriter( conexion.getOutputStream(),true); escritura.write(0x9d); escritura.print("\u009d"); It always send 0x3f.

  • Flash Performance issue

    Hi, I always notice that streaming flash files run very slow in my browser.The video looks jerky and sound also breaks while playing. If i download the same flv file and play it in VLC etc, it works fine.Has anyone else also experienced similar issue

  • Late 2013 rMBP 13" 802.11ac problem

    I've got a brand new 13" Retina MacBook Pro 13" (the 512GB i5 model)...and after a rather strong showing at first, it falls absolutely flat when attempting to connect to the 5GHz side of my wireless router. Specifically, this:   Current Network Infor

  • VS/VC++ Struct Member Alignment (set to 4)?

    I would like to ask why Struct Member Alignement is set to 4 instead to Default (or 8 on x64)? (in Visual Studio 2008 - Project properties ( -> Configuration  properties) -> C/C++ -> Code Generation -> Struct Member  Alignment) There were runtime pro

  • How to a drop tablespace ?????

    Hi Expert !! I am living my life in ORA errors. To describe the complete picture: 1) We have a partitioned table whose partitions reside in multiple tablespaces. 2) One of the datafiles got corrupted where one old partition resides. 3) We are not int