Field selection for MB02

Hi, can anyone advise if there's a field selection for MB02?  Reason is bcos i wan to make some fields editable after user posted the GR document in MIGO.
Thanks
PP

Hi!
The transaction code MB02 was designed to change only some 'information fields' like:                                                                               
- position text                                                                             
- goods recipient                                                                           
- material slip                                                                             
- doc.header text                                                                               
MB02 is not able to change important input fields. If those entries are incorrect, you have to use MBST or MIGO to cancel the whole posting. After that you have to do the goods movement again with the correct data.        
Best regards,
Esther.

Similar Messages

  • Field selection for movement type 601 account 894025 differs for cutomer

    While posting goods after saving delivery merror message
    Field selection for movement type 601/aact 894025 differs for customer goods movement
    I tried OMJJ>Mvtmt Type>601>Field selection enjoy>601  KONTO  Optional field
    Now this is only happening in the cases where I have assigned free goods Inclusive 10MT. If the order is less than 10MT (that is if no free goods attached) posting is accepted & billing & account determination is processed successfully.
    I am unable to identify the reason though I have worked a lot on MM/Fico on the system.
    Please provide your valued inputs why this is happening?
    Thanks for your time.
    Rajiv

    Hi Raja,
    Thanks for prompt reply.
    I shall appreciate if you elaborate how to check
    check the Field selection goup in control tab for that GL 
    I tried OBC$--> (Is this correct?)
    I checked cost center field G004 -->Addl Act assignemtn -->Cost center which is Optional entry. Should I check any other items on the screen as I am unable to understand which field is applicable on a/c field.
    Profit center, cost object are  in G004 as supressed field.
    So should I make optional? So thing will work.
    Other Q should I also consider G025 Inventory adjustment account? As per error this a/c is not shown. So pl advise me steps or heading which I should consider.
    Thanks for yr time.
    Rajiv

  • FIELD SELECTION FOR MOVEMENT TYPE AND ACCOUNT

    Hi,
           I am trying to do the Post Goods Issue (PGI).
    But, the system is throwing an error as mentioned below.
    Field Selection for Movement Type 901 / Account 4070000001 differs for Customer Goods Movement (015)
    I made the Cost Center as Required Entry. But, there was no effect on the PGI.
    I could not make out the exact error.
    Please guide me properly in this regard and do the needful.
    Thanks in advance.
    Thanks & Regards,
    Srinivasa M.S
    +91-9910077829

    Hi,
    On the Error message detail, system will guide you to the Configuration details for Field settings for Movement type & Account, please get in touch with your FI consultant, to make the Field selection for the account similr to that of your movement type, this is a very common issue.
    Regards
    Chandra Shekhar

  • Field Selection for Open Item Clearing

    In Field Selection for open item clearing (t-code : O7F1),
    can I maintain non standard field such as "XREF3" (Reference KEY 3) ?
    I tried to insert "KIDNO" into O7F1 and system allowed it.
    But when I checked in F-51, the XREF3 (Reference KEY 3) was not in the field selection.
    Have anyone get the same issue?
    Thanks.

    Hi Sneha,
    Check the following config path for relevant settings-
    Financial Accounting (New) > Accounts Receivable and Accounts Payable  > Business Transactions  > Open Item Clearing > Make Settings for Processing Open Items > Choose Selection Fields
    Select customer , vendor etc as per requirement.
    Regards

  • Use of Field selection for Multilevel list Display Equipment/Function loc

    Dear Expert,
                          Anybody suggest me that how can we use the feature of Equipment & function location settings as given SPRO path.
    Plant Maintenance and Customer Service ® Master Data in Plant Maintenance and Customer Service ® Technical Objects ® Equipment ® Define Field Selection for Multi-Level List Displays of Equipment.
    Plant Maintenance and Customer Service ® Master Data in Plant Maintenance and Customer Service ® Technical Objects ® Functional Locations ® Field Selection for Multi-Level List Displays of Functional Locations.
    Your help & suggestions are much appreciated.
    Regards,
    Akhilesh

    Dear AKhliesh,
    This customizing setting is for the T-code IE07. You can customize view of IE07 in different strcuture with required fields wants to didplay or suppress.
    Regards,
    Kaushal Rai

  • Field Selection for Maintenance Planing

    Hi Dear,
               I have done some field selection somewhere in SAP System.Now when I am creating Maintenance Item,Maintenance Plan,now I am getting Function Location field as Required.
    I don't remember where is the field selection for making the field Function location mandatory.
    Please suggest.I am also looking into it.
    Thanks and Regards,
    VJ

    Hi Narasimhan,
                           I got the field where the changes need to be done.In Notification reference screen I had set the Function Location as a mandatory field.
    Problem solved by me it self.
    Thanks for your Effort.
    Thanks and regards,
    VJ

  • Field selection for G/L account 893010 not set up

    Hi,
    when iam creating a purchase order with reference of purchase requisition it is showing error as field selection for G/L account 893010 not set up,
    Thanking you,
    sukumar.P

    Hello,
    The field status are set up in two places.
        - on G/L account ( Tcode: FS03 - display, Tcode: OB14 Maintain )
        - on account assignment category in purchasing (Tcode: OME9)
          Both settings must fit to each other. If not, you receive error message ME 045 says that G/L account cannot be used.
          'Earmarked fund' should never be 'Req. Entry in G/L account's field status group setting.
          Because the MIGO document will not store 'earmarked fund' therefore no earmarked fund in accounting document either.
    For further information and guidance, take assistance of FI consultant in your team.
    Thanks & Regards
    JP

  • Field Selection for - Invoice Verification (MIRO)

    Dear Experts,
    Can anybody please explain how make Field selection for INVOICE VERIFICATION (MIRO).
    I want BUSINESS AREA field mandatory in MIRO.
    Thanks in Advance

    Hi,
    Business area is linked to other organizational units (plant, division,
    distribution chanel, cost center). It can be defined using assigments
    (e. cost centers to the business area) or combinations of information
    (like plant and division determination).
    It is usually derived from the account assignments of the cost items
    and inherited from there into the vendor line item.
    For MIRO,to automatically fill the business area it must be able to
    uniquely identify a business area.
    This means that for multiple materials each one must have the same
    business area for IV to fill the vendor line item.
    This is the way the system is designed.
    The business area can be set as 'optional' field and is not 'mandatory'
    by design.It can be customised according to the individual needs.
    Please check the field status in tr OB41/OB14 and  OB23 for the vendor.
    Best Regards,
    Arminda Jack

  • IE07 and error 'Maintain field selection for Fleet data in Equipment List'

    Hi all,
    When running transaction IE07 (multi-level equipment list) , I get the following error:  'Maintain field selection for Fleet data in Equipment List (Multilevel)'
    I can't see where is the missing configuration point.
    We have activated business function LOG_EAM_CI_3.
    Have anyone encountered this error before?
    Thanks,
    P.

    Hi Narasimhan
    Could you give more details ? where is located this setting?
    Thanks,
    P.

  • Field selection for Notification type

    Hi all,
    I have a configured  a notification type. I want to hide unwanted fields . I checked for " Set Field Selection for Notifications" in spro but  i am not able to find these fields.
    The Fields are under below tabs
    location Data Tab
    1.Room-ILOA-MSGRP
    2.Plant section-ILOA-BEBER
    3.Business Area-ILOA-GSBER
    Please guide  how to hide  theses fields
    Anil Kumar

    Hi Anil
    I have not checked in SAP, butif the hiding of the fields in not possible through SPRO, then an easy way to hide fields is to use GUixT, which comes with std. SAP.
    Regards
    Manish Bansal

  • Set Field Selection for Completion Confirmation

    I want to change the indicator of one field from "ready to input" to "required"..But i couldnt understand exactly the hierarchy under "Set Field Selection for Completion Confirmation"  tab in SPRO. there are 3 parts under that tab;
    1-PM: Confirmation - initial screen
    2-PM: Confirmation - list and detail
    3-PM: Confirmation - parameter
    and i also couldnt find the name of my field which is about "codes for causes"..
    Thanks...

    Russ,
      I don't think it could be accomplished through configuration or through Transaction variants.
    I think the simplest way to accomplish this would be by using one of the below user exits according to your needs.
    CONFPM02: Customer-specific entry checks 1
    CONFPM03: Customer-specific check by operation selection
    CONFPM04: Customer-specific entry checks 2
    The other option would be to use the Implicit enhancement functionality(If you are in EC C6.0 or above)  to modify the table control field attributes dynamically.
    Regards
    Narasimhan

  • Field selection for order

    Hi all
    Can I know use of custumization trxn OIXW and OIRS (Field selection for order and sub order data field.)
    My assumption was that when I make sequence chane in OIXW then tht will reflect in IW38/IW39.
    but it is not so.
    Basically I want to araange column sequence in Iw38 as per my requirement. instead of creating layout is there
    any other procedure ?
    Regards,
    Prasad

    Hi,
    Any changes you make in field selection through OIXW or OIRS will reflect in IW38/IW39 as a global default variant.Any user variant created as default variant will have priority over this.So make it sure that this default variant is Protected one so that no one can chnage as you want this to be global variant.
    regds,
    atul

  • Field selection for plant parameters

    In plant parameters - in external procurement tab-i want to change field selection for Account assignment for non valuated materials field to optional,.Presently it is required field
    can sombeody tell me path

    Hi
    Go to SPRO>Production>Material Requirements Planning>Plant Parameters> Carry Out Overall Maintenance of Plant Parameters and execute.  (Transcation OPPQ)
    Select Maintain and give the plant
    Select External procurement Tab and select Unknown account assignment.
    But, you need account assignment for non-valuated material for external procurement.
    Hope it solves your issue.
    regards,
    Edited by: Raju DS on Dec 4, 2008 7:47 AM

  • Field Selection for Networks

    Hi Experts
    I am working on the field selection for Networks. In TCode CJ20N, Network Header Overview, the Resp. Cost Center field (on Assignment Tab) is avialable, however, the same is not showing up in the Field Selection for Networks (TCodes: OPUA, OPUB and OPUC). Similar is the case with Plan Cost Calculation drop downlist (on Control Tab).
    How can we define the field selection for these fields?
    Regards
    Shoaib

    AP Thanks for the reply.
    As you mentioned, the Resp. Cost Center (PRPS-FKSTL) and Req. Cost Center (PRPS-AKSTL) are available in the WBS on Basic Data Tab Page. However, the Resp. Cost Center (CAUFVD-KOSTV) field is also available on the Network Header Level on Assignments Tab and the dropdown list Plan Cost Calc (CNDOK-NW_PLANCOST) is also showing up in the Network Header, Control Tab Page.
    The fields Resp. Cost Center (CAUFVD-KOSTV) and Plan Cost Calc (CNDOK-NW_PLANCOST) are not available in the field selection for Networks as mentioned earlier. The Resp. Cost Center and Req. Cost Center on WBS are available on the WBS Field Selection.
    How do we control the field selection for the  Resp. Cost Center (CAUFVD-KOSTV) and Plan Cost Calc (CNDOK-NW_PLANCOST)  on Network Header Level.
    Regards
    Shoaib

  • Where to find "Define field selection for Individual approval view" in ECC5

    Hi,
    I'm trying to find where I can configure the columns for the managers approval view in the backend in ECC5.
    Time sheet>Setting for all user interfaces>Approval procedure>Approve working times> Define field selection for Individual approval view, doesn't appear to exist.
    Any help appreciated.
    Rob

    Rob,
    Try this:
    IMG->Integration with Other mySAP.Com Components->Business Packages/Functional Packages->Manager Self-Service (mySAP ERP)->Working Time->Approve Working Time->Define Field Selection from Individual Approval View
    Alternatively use SM34 and go to view cluster VC_PT_FIELD_SELECTION and enter the screen area as CTS.
    Hope this helps. Good luck.
    Regards,
    Raj.

Maybe you are looking for