Field Service - STAR program is completing with Error message
Hi
Synchronize Territory Assignment Rules (STAR) program is getting completed with following error message:
Parameters used were 'Service' with a Run mode as 'Total Refresh'. It errors out with 'No data found' error message. (Log file appended below)
Can someone help to find out root cause?
Regards,
CRM Foundation: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
JTY_STAR module: Synchronize Territory Assignment Rules
Current system time is 29-APR-2011 15:01:48
**Starts**29-APR-2011 15:01:48
**Ends**29-APR-2011 15:01:55
100 : ORA-01403: no data found
Start of log messages from FND_FILE
End of log messages from FND_FILE
Executing request completion options...
Finished executing request completion options.
Concurrent request completed
Current system time is 29-APR-2011 15:01:55
P.S. Reposting - It looks like I had posted in wrong category earlier. Sorry!. Re-posting again with CRM category for Field service this time.
As per the SR we had to laod all the old rates, as this was the beginning of a new fiscal year.
Similar Messages
-
I purchased 3 books from store 2 jhave incomplete downloaded with most chapters with error messages 1 has not downloaded at all
I don't know how to repet the downloadDelete the damaged items, then locate in the store and redownload.
tt2 -
I can't use acrobat XI at all, so ive resorted back to plain Reader X even though I pay for the Acrobat Pro. I have a new Samsung laptop with 6GB dual drive RAM and Windows 8.1 - 64 bit. That should be enough to run Acrobat
Hi Ryan ,
Please follow the below mentioned steps and see if that helps.
Delete all the files from following folders:
C:\ProgramData\Adobe\SLStore
C:\Program Files (x86)\Common Files\Adobe\SLCache
And, delete all files from following folder except cache.db
C:\Program Files (x86)\Common Files\Adobe\ Adobe PCD
Launch the product and activate again with new serial number
Or you can try these as well .
Please disable protected mode and try.
Disable Enhanced Security option.
If possible, Uninstall and re-install Acrobat.
Regards
Sukrit Dhingra -
How to keep the field open for input with error message in report program
Hi,
Need a help in solving the below issue.
"How to keep the field open for input with error message in report program"
Regards,
C.Shasiraj.Hi...
you have to use the event:
<b>AT SELECTION-SCREEN ON <FIELD> EVENT.</b>
u have to give an error message in this event.
Consider the following <b>Example:</b>
<b>PARAMETERS : NUMBER TYPE I.
AT SELECTION-SCREEN ON NUMBER.
IF NUMBER = 10.
MESSAGE 'Number vakue is 10' TYPE 'E'.
ENDIF.
START-OF-SELECTION.
WRITE NUMBER.
</b>
in this if u give the value of number = 10, it will not proceed further, if u give some other value other than 10 you will proceed further...
Execute this program once u will understand....
also Consider the following links :
<b>Regarding events:</b>
http://help.sap.com/saphelp_erp2005vp/helpdata/en/79/34a237d9b511d1950e0000e8353423/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/79/34a23ad9b511d1950e0000e8353423/frameset.htm
<b>Regarding messages:</b>
http://help.sap.com/saphelp_erp2005vp/helpdata/en/c5/aa575426ad11d2954d0000e8353423/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/c5/aa575426ad11d2954d0000e8353423/frameset.htm
This is very useful.......
Reward points if useful....
Suresh.... -
SharePoint 2013 site collection 'upgrade completed with errors'
Hi All,
I am in process to upgrade SharePoint 2010 to SharePoint 2013 with all steps as mentioned in TechNet.
I was able to get all the SP2010 UI in SP2013 environment. However, when I navigated to top level site and clicked on “Site
Collection health checks”. In SP2010 environment I never used (as Farm Admin) any Video content type. It belongs
to out-of-the-box "digital asset content types" and cannot be deleted.
Therefore I changed the name of Video to our department name like "Video - Company" and ran the site collection health check again. This time there was no conflict for content types.
After ran the site collection upgrade I got following error.
-------------------------------------------START------------------------------------------
05/05/2014 14:34:28.66 OWSTIMER (0x1474)
0x123C SharePoint Foundation Upgrade
SPFeatureDefinition aj2bj
ERROR Feature upgrade action 'AddContentTypeField' threw an exception upgrading Feature 'CTypes' (Id: 15/'695b6570-a48b-4a8e-8ea5-26ea7fc1d162') in Site 'http://sp13fe01-dev': Field type
Rating is not installed properly. Go to the list settings page to delete this field.
32d48d9c-70d4-f09a-6073-526808f844be
05/05/2014 14:34:53.04 OWSTIMER (0x1474)
0x123C SharePoint Foundation Upgrade
SPSiteWssSequence2 ajy6m
ERROR Feature upgrade incomplete for Feature 'CTypes' (Id: 15/'695b6570-a48b-4a8e-8ea5-26ea7fc1d162') in Site 'http://sp13fe01-dev'. Exception: Field type Rating is not installed properly. Go to the list settings
page to delete this field. 32d48d9c-70d4-f09a-6073-526808f844be
05/05/2014 15:18:43.95 OWSTIMER (0x1474)
0x123C SharePoint Foundation Upgrade
SPManager ajxoe
ERROR RunUpgradeSiteSession [SPSite Url=http://sp13fe01-dev] failed.
32d48d9c-70d4-f09a-6073-526808f844be
05/05/2014 15:18:44.16 OWSTIMER (0x1474)
0x123C SharePoint Foundation Upgrade
SPManager ajxoe
ERROR Exception: Upgrade completed with errors. Review the upgrade log file located in C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\LOGS\SiteUpgrade-20140505-143330-61.log. The
number of errors and warnings is listed at the end of the upgrade log file.
32d48d9c-70d4-f09a-6073-526808f844be
05/05/2014 15:18:44.16 OWSTIMER (0x1474)
0x123C SharePoint Foundation Upgrade
SPManager ajxoe
ERROR at Microsoft.SharePoint.Upgrade.SPUpgradeSession.CheckPoint() at Microsoft.SharePoint.Upgrade.SPUpgradeSession.LogEnd() at Microsoft.SharePoint.Upgrade.SPManager.RunUpgradeSiteSessionCore(Object
lockObject, SPSite site, SPUpgradeOperationFlags upgradeOperationFlags, Boolean checkConcurrentSiteUpgradeSessi
32d48d9c-70d4-f09a-6073-526808f844be
-----------------------------------END-------------------------------------
Feature ID 695b6570-a48b-4a8e-8ea5-26ea7fc1d162 is Standard Content Type Definitions https://social.technet.microsoft.com/wiki/contents/articles/7695.sharepoint-2010-list-of-features-id-displayname-and-scopes.aspx.
Any expert to solve the issue??
Thank you.
regards,
Aroh ShuklaHi All and Inderjeet,
Thanks for your reply and pointers.
I did follow the steps as mentioned in the links above. I used some third party solutions but not for any Video solution. I was able to successfully migrated the SP2010 (WSS_Content) to SP2013 (WSS_Content) environment a few weeks back with exactly same
third party solutions and no site collection error:
I renamed the default and out-of-the box video site content type as shown:
I ran the "Site Collection Health Check" and did not receive any error as in my second screenshot.
But, after upgrade the Site Collection Upgrade and got the same errors.
I don't know if there is any SharePoint Server 2013 patch gave this error as I keep run the Windows Server 2012 (not running R2) and SharePoint Server 2013 regularly.
Can suggest how to resolve this error?
Many Thanks!!
--Aaroh
Aroh Shukla
The same here. Opening a support ticket with MS. -
Transport control program tp ended with error code 0212
Hi all,
I have created a two system landscape of development & production server. But while I am releasing any request from develpoment server a error is showing: " Transport control program tp ended with error code 0212 Errors: could not access file as supposed (see dev_tp or S".I have chosen development server as domain controller. TMS alert viewer error message also contains the following information------>command: TMS_MGR_READ_TRANSPORT_QUEUE
service: transport service
start : online
Function: TMS_TP_SHOW_BUFFER
message: TP_REPORTED_ERROR
In import monitor it's showing : "tp finished: could not access file as supposed (see dev_tp or SLOG1113.K"
Can you tell me how to resolve this issue?dev_tp contains:
This is R3trans.exe version 6.14 (release 700 - 09.04.10 - 11:26:00).
unicode enabled version
usage: R3trans.exe [<options>] <control_file>
The control_file describes what R3trans has to do.
The following options are possible:
-c f1 f2 : Copy file f1 to f2 with character set conversion.
-d : DB connect. Test if SAP database is available.
-i file : Import from file without using a control file.
-l file : List the contents of file to the log file.
-m file : List the contents of file to allow tp to create a cofile.
-t : Test. All database changes are rolled back.
-t4 : Trace level 4. Switch on developer trace.
-u <int> : Unconditional modes. See below.
-v : Verbose. Write more details to the log file.
-w file : Log file. The default log file is 'trans.log'.
-x : DB connect without access on any SAP table.
R3trans.exe finished (0012).
& the slog file is not there in the trans/log directory -
Report Completed with error...
Hi There,
Account Analysis Report in oracle ebs R12 completed with error please find below error message.
Warning!!! Due to high volume of data, got out of memory exception...***
****Please retry with scalable option or modify the Data template to run in scalable mode...***
java.util.logging.ErrorManager: 2:
oracle.core.ojdl.LoggingException: oracle.core.ojdl.LoggingException: Attempt to flush a closed LogWriter
at oracle.core.ojdl.ExceptionHandler.onException(Unknown Source)
at oracle.core.ojdl.BufferedLogWriter.handleException(Unknown Source)
at oracle.core.ojdl.BufferedLogWriter.flush(Unknown Source)
at oracle.core.ojdl.logging.ODLHandler.flush(Unknown Source)
at oracle.core.ojdl.logging.ODLHandler.publish(Unknown Source)
at java.util.logging.Logger.log(Logger.java:472)
at java.util.logging.Logger.doLog(Logger.java:494)
at java.util.logging.Logger.log(Logger.java:517)
at oracle.ias.cache.CacheInternal.logLifecycleEvent(Unknown Source)
at oracle.ias.cache.CacheInternal.close(Unknown Source)
at oracle.ias.cache.Cache.close(Unknown Source)
at oracle.apps.jtf.cache.IASCacheProvider$CacheStopperThread.run(IASCacheProvider.java:1480)
Caused by: oracle.core.ojdl.LoggingException: Attempt to flush a closed LogWriter
... 10 more
Start of log messages from FND_FILE
End of log messages from FND_FILE
Executing request completion options...
------------- 1) PUBLISH -------------
Beginning post-processing of request 1762394 on node ORAPRD at 07-APR-2012 10:24:48.
Post-processing of request 1762394 failed at 07-APR-2012 10:24:49 with the error message:
One or more post-processing actions failed. Consult the OPP service log for details.
Finished executing request completion options.
Concurrent request completed
Current system time is 07-APR-2012 10:24:49
its a very important report please help me out in this regards,
Thanks in advance.
Regards,
Mohsin
Edited by: 920138 on Apr 6, 2012 11:37 PMPlease post the details of the application release, database version and OS.
Can you find any errors in the OPP log file?
Please see these docs.
XLAAARPT: Account Analysis Report Errors with Warning: Due to High Volume Of Data Got Out Of Memory Exception Please Retry With Scalable Option Or Modify The Data Template To Run In Scalable Mode [ID 1304660.1]
SLA: How to Troubleshoot XML Performance Issues in the Account Analysis & Journal Entries Report [ID 983063.1]
How to Configure the Account Analysis Report in Release 12 for Large Reports [ID 737311.1]
R12: XLAAARPT - Subledger Accounting Account Analysis Report, gets Out of Memory Exception, Retry with Scalable Option [ID 836551.1]
R12: AP Trial Balance Complete With Warning The Output Post-processor is Running But Has Not Picked up This Request [ID 1224684.1]
R12 Subledger Period Close Exception Report (XLAPEXRPT) Errors With: "out of memory exception" [ID 952747.1]
Account Analysis Report Shows Results in XML [ID 1325208.1]
R12: Troubleshooting Known XML Publisher and E-Business Suite (EBS) Integration Issues [ID 1410160.1]
Thanks,
Hussein -
We are in the middle of testing our R12 Upgrade. I am getting this error from the invoice XML-based report that we are using in R12. (based on log). Only for a specific invoice number that this error is appearing. The trace is not showing me anything. I don't know how to proceed on how to debug where the error is coming from and how to fix this. I found a patch 8339196 that shows exactly the same error number but however, I have to reproduce the error in another test instance before we apply the patch. I created exactly the same order and interface to AR and it doesnt generate an error. I even copied the order and interface to AR and it doesn't complete with error. It is only for this particular invoice that is having an issue and I need to get the root cause as to why. Please help. I appreciate what you all can contribute to identify and fix our issue. We have not faced this issue in R11i that we are maintaining right now for the same program which has been running for sometime. However, after the upgrade for this particular data that the user has created, it is throwing this error REP-271504897.
MSG-00100: DEBUG: Get_Country_Description Return value:
MSG-00100: DEBUG: Get_Country_Description Return value:
REP-0002: Unable to retrieve a string from the Report Builder message file.
REP-271504897:
REP-0069: Internal error
REP-57054: In-process job terminated:Terminated with error:
REP-271504897: MSG-00100: DEBUG: BeforeReport_Trigger +
MSG-00100: DEBUG: AfterParam_Procs.Populate_Printing_Option
MSG-00100: DEBUG: AfterParam_Procs.Populate_Tax_Printing_Option
MSG-00100: DEBUG: BeforeReport_Trigger.Get_Message_Details
MSG-00100: DEBUG: BeforeReport_Trigger.Get_Org_Profile.
MSG-00100: DEBUG: Organization Id: 117
MSG-00100: DEBUG: BeforeReport_Trigger.Build_Where_Clause
MSG-00100: DEBUG: P_Choi
Report Builder: Release 10.1.2.3.0 - Production on Tue Jul 23 09:56:46 2013
Copyright (c) 1982, 2005, Oracle. All rights reserved.Hi,
Check on this note also : Purchasing Reports Fail When Changing Output To XML REP-0002 REP-271504897 REP-57054 (Doc ID 1452608.1)
If you cant reproduce the issue on other instance, apply the patch on the test instance and verify all the funcionality related to the patch works OK. Then move the patch to production. Or you can clone the prod environment to test the patch.
Regards, -
Running AP transfer to General Ledger: Complete with Error
Below is the error I got while trying to run : AP transfer to General Ledger and I got Complete with Error:
Starting concurrent program execution...
+-----------------------------
Arguments
p_selection_type='1'
p_set_of_books_id='1'
p_include_reporting_sob='N'
p_batch_name='jginv'
p_from_date='2007/01/01 00:00:00'
p_to_date='2008/12/31 00:00:00'
p_accounting_method='Accrual'
p_journal_category='A'
p_validate_account='Y'
p_gl_transfer_mode='D'
p_submit_journal_import='Y'
p_summary_journal_entry='N'
p_debug_flag='N'
p_trace_flag='N'
APPLLCSP Environment Variable set to :
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.UTF8
LOG :
Report: c:\oracle11i\visappl\ap\11.5.0\reports\US\APXGLTRN.rdf
Logged onto server:
Username:
LOG :
Logged onto server:
Username: APPS
MSG MSG-00001: After SRWINIT
MSG MSG-00002: After Get_Sob_Ids
MSG MSG-00002: After Get_Company_Name
MSG MSG-00003: After Get_NLS_Strings
MSG MSG-00004: After Get_Base_Curr_Data
MSG MSG-00005: Calling Transfer Request
MSG MSG-00005: After calling Transfer Request
MSG MSG-00100: Error occured in Insert_Liability_Balance
MSG MSG-00101: Error Code :-20100
MSG MSG-00102: Error Message :ORA-20100: File o0059033.tmp creation for FND_FILE failed.
You will find more information on the cause of the error in request log.
ORA-06512: at "APPS.FND_FILE", line 396
ORA-06512: at "APPS.FND_FILE", line 499
ORA-06512: at "APPS.AP_TRIAL_BALANCE_PKG", line 1252
MSG MSG-00005: Insert_Liability_Balance Failed.
MSG MSG-00000: User-Defined Exception
ERR REP-1419: 'beforereport': PL/SQL program aborted.
Program exited with status 3
Cause: The program terminated, returning status code 3.
Action: Check your installation manual for the meaning of this code on this operating system.
Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 2748532.
Review your concurrent request log and/or report output file for more detailed information.
JonRemember that this problem is from Vision training database and not real life productionIt does not matter whether you have a Vision demo database or fresh database installation.
The APPLPTMP directory does not even exist- Open a new DOS session
- cd c:\oracle11i\visappl
- Run envshell.cmd
- Type "echo %APPLPTMP%", does it return something? -
Payables Accounting Process Completing with Error
Hi All,
After running Payables Accounting Process I am getting error
Spawned Process 151662
MSG-00001: After SRWINIT
MSG-00002: Check that AX is not installed before calling the accounting engine
MSG-00003: AX is not installed, Calling the accounting engine
MSG-00004: After the call to AP_Accounting_Engine_Pkg.Do_Accounting
MSG-00005: Error occured in the accounting process
MSG-00006: Error Message:
REP-1419: 'beforereport': PL/SQL program aborted.
Inside Execute for Invoice_Canc_Event_Core
Inside Derive_Accounting_Entry for Invoice_Event_Core
Starting Accrual Basis Accounting for Invoice Event...
INSERTing Header into AP_AE_Headers ...
ORA-00001: unique constraint (AP.AP_AE_HEADERS_U2) violated occurred in
AP_ACCOU
NTING_MAIN_PKG.Insert_AE_HeaderAP_INVOICE_EVENT_CORE_PKG.Derive_Accounting_Entry
<-AP_INVOICE_CANC_EVENT_CORE_PKG.Execute<-AP_ACCOUNTING_MAIN_PKG.Create_Accounti
ng_Entry<-AP_ACCOUNTING_ENGINE_PKG.do_accounting<-APXAEREP
with parameters (&PAR
AMETERS)
while performing the following operation:
&DEBUG_INFO
End of log messages from FND_FILE
Program exited with status 1
Please suggest what could be the possible error, this is happening in Production so sort of urgent!
Thanks,
AnchorageDuplicate thread ..
Payables Accounting Process Completing with Error
Payables Accounting Process Completing with Error -
'Bank Statement Loader Execution Report ' completed with errors.
Dear Friends,
While I try to call seeded concurrent program 'Bank Statement Loader Execution Report ' its completed with error.log file details:
Enter Password:
REP-0004: Warning: Unable to open user preference file.
REP-3000: Internal error starting Oracle Toolkit.
REP-3000: Internal error starting Oracle Toolkit.
REP-0069: Internal error
REP-57054: In-process job terminated:Terminated with error:
REP-3000: Internal error starting Oracle Toolkit.
Earlier everthing is working fine.I am unable to find cause for the error occurrence.
Any one please help me..REP-0004: Warning: Unable to open user preference file.
REP-3000: Internal error starting Oracle Toolkit.
REP-3000: Internal error starting Oracle Toolkit.
REP-0069: Internal error
REP-57054: In-process job terminated:Terminated with error:
REP-3000: Internal error starting Oracle Toolkit.Please see old threads for similar discussion -- http://forums.oracle.com/forums/search.jspa?threadID=&q=REP-3000&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein -
Transport control program tp ended with error code 0208
Hello
I installed minisap NW2004s on XP/SP2 VMWARE 4.5. The installation it self's works fine, but have some problems in the stms. when i call the transport queue there appears an error as follow:
System NSP Command TMS_MGR_READ_TRANSPORT_QUEUE
Client 000 Service Transport Service
User TMSADM Start Online
Date 12.10.2006 Function TMS_TP_SHOW_BUFFER
Time 07:13:13 Message TP_REPORTED_ERROR
Transport control program tp ended with error code 0208
Errors: error in transportprofil (param missing
unknown,.
Any Idea? Thanks for your help.
Regards, GeorgeHi
You can edit the parameter profile using RZ10 and RZ11. You should not copy but manually edit the parameters. Also you need to make a consistency check so that the parameters will be copied to the database from the OS level. You will find an option to perform consistency check in RZ11.
Hope that helps. -
Transport control program tp ended with error code 0203
when i import queue and transport queue from dev to prd ,error show:
Transport control program tp ended with error code 0203
Message no. XT200
Diagnosis
An error occurred when executing a tp command.
Command: IMPORT DEVK900298 P01 clientP01 U0 pf=/usr/sap/tra
Return code: 0203
Error text: wrong syntax in tp call
Request: DEVK900298
System Response
The function terminates.
Procedure
Correct the error and execute the command again if necessary.Dear Allen,
The transport control program tp collects all return codes that occur when a tp command is executed. From all of these single return codes, a combined return code is calculated that tp outputs as a result at the end the command. During an import, for example, all return codes for individual import steps are handled. If a special return code does not occur, then the combined return code at the end is the maximum of individual return codes that occur. In addition to the value of the return code, tp also gives a short description of this return code. You can display this short description using the command explainrc.
Normally, all return codes that occur originate from individual transport steps. Since these individual return codes can only have the following values 0, 4, 6, 8, 12, 13, 14, 16, the combined return code also has one of these values. However, if a general error occurs, a single return code over 200 is generated. For example, this could arise if tp cannot establish a connection to the database. The maximum return code for all single transport steps is output in a separate message before specifying the combined returned code. In this case, the combined return code is always the return code of the general error message.
<b>tp Commands:</b>
tp addtobuffer <request> <sapsid>
As of Release 4.6A, an explicit addtobuffer command leaves the position of the entry unchanged, if the relevant transport request is already in the buffer. Only the status of the entry is changed:
Unconditional modes appearing in the command line are added to the unconditional modes in the buffer.
All the steps of the entry are re-initialized.
If the entry found is not an initial entry, the import step for the command file is set to *4000 .
Before you call this command and its options, consider the effects of changing the import sequence.
tp cleanbuffer <sapsid>
This deletes successfully imported change requests from the list of requests that are marked for import into the SAP System <SAPSID>. This function is contained in the commands tp import all <sapsid> and tp put <sapsid> .
tp delfrombuffer <request> <sapsid>
If the specified request is marked for import into the specified SAP System, this flag is deleted from the import list.
Before you call this command, consider the effects of changing the import sequence.
As of Release 4.6A: If a transport request was only partially imported, you can delete this type of transport request from the buffer. However, if a deleted transport request is placed in the buffer (without having been initially or completely imported), the attributes of the old entry are reactivated. This means the return codes, the unconditional modes and tags of the deleted entry appear in the new entry.
tp delstopmark <sapsid>
If the list of requests marked for import into the specified SAP System contains a STOP mark, the mark is deleted.
tp export <request>
This exports the complete request from the source system. This command starts the export of a request from the operating system level. Only use this command in exceptional cases. The SAP System uses the command expwbo to release requests from CTS transactions.
tp reformatbuffer <sapsid> [options]
This automatically reformats the entire buffer.
As of Release 4.5A, there are 2 different formats for buffer entries. (As of Release 4.5A, tp can work with both formats, and with a puffer containing heterogeneous entries. As of Release 4.6A, tp can work with 3 formats.)
However, in certain cases entries with the old formatting have to be reformatted during the normal run of tp . In this case, the entire buffer is automatically reformatted.
If you use the options downtorelease and Iagree for command reformatbuffer , you can format the buffer so that its formatting is compatible with an older release:
Option downtorelease <Release>
The command reformatbuffer with this option formats the buffer so that the formatting corresponds to the one used in an old release. This is necessary if tp writes buffer entries to the buffer of another system, but uses a buffer format that the transport control programs does not understand in this system.
Since older formats cannot store the same amount of information as the newer ones, some information contained in the original buffer may not be stored in the unformatted buffer. This may lead to data loss.
To avoid data loss, the original buffer is stored. In addition, you have the following functions:
Displaying the unformatted buffer (using showbuffer <SID> )
Displaying the original buffer (using showbuffer buffer=<SID>SAV )
Accepting the unformatted buffer (using reformatbuffer and the option Iagree yes )
Resetting the changes (using reformatpuffer and the option Iagree no )
If you call reformatpuffer using downtorelease , tp displays in detail if information was lost by reformatting, and what that information was. tp also names the commands that is has to execute to accept or reject the changes.
If you use the option downtorelease , you must also specify the option Iagree with yes or no . You cannot use the transport system until you decide to accept or reject the changes.
Option Iagree
Here are the following values for this option:
yes ( true )
Accept the change made by tp reformatbuffer <SID> downtorelease <rel>
In this case, tp deleted the buffer semaphore file that was lifted for security reasons at the first call of reformatbuffer
no ( false )
Reject the change made by tp reformatbuffer <SID> downtorelease <rel> In this case, tp copies the backup of the original buffer back and deletes the buffer semaphore file that was lifted for security reasons at the first call of reformatbuffer
tp setstopmark <sapsid>
A special STOP mark is added to the list of requests registered for import into the specified SAP System. The commands tp import all <sapsid> and tp put <sapsid> only process the requests in front of this stop mark.
If there is no stop mark, it is automatically generated by the commands
tp import all <sapsid> and tp put <sapsid> .
When all the requests in front of the stop mark have been imported successfully, at the end of all the calls the related marks and the mark itself are deleted.
A STOP mark can only be placed at the end of the change requests that have already been marked. In addition, it can only be set if no other mark of the same kind already exists.
tp showparams <sapsid>
This tp function displays which values the individual parameters of the transport profile have for the current SAP System.
tp verse <request>
This creates versions of the objects in the specified request. This transport step is contained in command export .
As of Release 4.5A, more actions that prepare the export are performed in this step.
Thanks and Regards,
Naveen. -
When attempting a reinstall of iTunes, I cant delete the file C\Program Files\Common Files\Apple\Internet Services\Shellstream.resources due to same error message as described above for iPod file; however i can't find it anywhere in the Task Manager
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards? -
"Synchronize WF LOCAL tables" has completed with error.
Hi Guys,
My FNDWFLSC program is failing with the below error:
ORA-12801: error signaled in parallel query server P000
ORA-30022: Cannot create segments in undo tablespace
When I check the tablespace its named as "APPS_UNDOTS1" and there are 4 undo....dbf files are present and have enough empty space on this tablespace.
Thanks,No, error in database log file.
Below is the full content of the log file..........
Application Object Library: Version : 11.5.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
FNDWFLSC module: Synchronize WF LOCAL tables
Current system time is 03-JUN-2013 23:34:11
**Starts**03-JUN-2013 23:34:11
**Ends**03-JUN-2013 23:34:12
ORA-12801: error signaled in parallel query server P000
ORA-30022: Cannot create segments in undo tablespace
Start of log messages from FND_FILE
End of log messages from FND_FILE
Successfully resubmitted concurrent program FNDWFLSC with request ID 19632231 to start at 04-JUN-2013 23:34:00 (ROUTINE=AFPSRS)
Executing request completion options...
Finished executing request completion options.
Exceptions posted by this request:
Concurrent Request for "Synchronize WF LOCAL tables" has completed with error.
Concurrent request completed
Current system time is 03-JUN-2013 23:34:13
---------------------------------------------------------------------------
Maybe you are looking for
-
I also tried holding the sleep/power button along with the minus button to reset it and that did not work either. Any help would be great, thanks.
-
Time machine kills Wifi network!!
I had recently posted a thread on TC forum "Weird shut down of TC" that my TC just shuts down routinely. I have a 1TB TC that has been working very well. I bought the new unibody MBP and the Time machine has been backing up quite nicely for past one
-
I can work around by restarting my Mac but must not touch my mail where the message sits as a draft. I am unable to send mail. Please how may I get rid of theemail and attachment? Thanks
-
When I attempt to update and then sync my apps, I get a message in ITunes "the iPhone "_____ ____" can not be synced. You do not have enough access privileges for this operation" Been using iPhone and MacBook Air successfully for many years Do not un
-
Uninstallation & re-installation issues
I had an issue with purchasing "actions" & it caused my Guided Edits & other tabs to dissapear. I read on other fourms to uninstall & reinstall Adobe PSE 10 because the "actions" I purcahsed created this issue. SO, tonight I uninstalled PSE & went to