Field WBS element is not modifiable in asset master data

Hi Friends
In case of one of my asset classes, i am not able to modify WBS element. It is greyed out.
I checked in screen layout rule assigned for that asset class, the fiield status is modifiable.
Please inform whether i need to check any other thing also.
Thanks & Regards
Bhairavi

Hi Paul,
Thanks for your reply.
Currently no WBS is assigned in the asset. I want to assign one WBS .
Currently one internal order & 1 cost center are assigned.
I tried insering qa new time interval also , but the field is grayed out & i cant do any changes in the field WBS element.
I have already checked the field status of this field in screen layout rule , its modifiable.
Kindly advice.
Thanks & Regards
Bhairavi

Similar Messages

Depreciation area set in Asset Class does not appear in asset master data

Depreciation area does not appear in the asset master data however it is set in the Asset class. If other asset is created in the same Asset class that depreciation area is automatically set in the asset master (it proofs that it is not a problem with Asset class).
I tried to set that deprecition area directly in the asset master data but all the fields are blocked for changing (is it possible to change that?).
What should I do as I need to post on that area ?
Thank you,
Jean

Ok Zaid! thanks,
But what treatment should I give to that asset? Because now it is not being evaluated in that area but we need to do it.
The asset was created in the prior exercise (year).
Regards,
Jean

Modify fixed asset master data thru migo

Hi experts,
I make PO with account assigment 'fixed asset'. This asset is created during the PO creation. When materials arrive more fields of that fixed asset master data are known (ie serial number). I'd like to have a way to save those data in asset during the GR without using 2 different transactions.
In MIGO t/c i see the fixed asset number and double clicking on it i access to display asset: master data (as i was on AS03 tc).
Do you think a way to call AS02 (change asset master data) thru MIGO exists?
Best regards,
Ruben

Hi Ruben,
Did you find a solution to your problem? I have a similar requirement.
I was planning on using the user-exit MBCF0005 to call a pop-up screen where the user can input the serial number and from there calling the BAPI to update the asset.
Cheers
Wayne

Displaying Evaluation groups field in the asset master data

Dears,
The Evaluation group fields in the allocation tab in the asset master data was not displayed in the layout, is there is any harm of displaying it in the production system after 3 years from Go-live.
i think it should not make any harm, i just want to confirm.
Regards,
Ahmed Samir

Salam Ahmed
There is no harm.. These fields are used for reportng. They dont impact the process in any way
Br, Ajay M

How to include depreciation are in asset master data

I have already activated depreciation area in the asset class but it did not appear inn asset master data.
How to include it there?
Tks,
Naej

Hi,
There are 2 aspect which you need to consider.
1) For exisiting asset as used AFBN as suggested by Srinivasa to activate the depreciation area.
2) For new asset OAYZ configuation would populate the dep key and life.
Thanks
Vaibhav
Edited by: vaibhav patil on Apr 22, 2010 10:40 PM

How to use WBS element in Asset master data upload

Dear All
Does any body know how to treat field WBS element in Asset master during upload.
Field POSNR in table ANLA is of 8 characters, but WBS element which is entered in asst master is more than 8 char.
I vaguely remember tht with wbs system internally assign a different number.
Has anybody come across this issue?
Please help
Thanks
Sanjeev

There are in the asset 2 fields for PS
One is filled when you do an settlement from an WBS (is not possible to fill in)
The other one you found in the the tab time dependend like cost center.
This field is available when you have assign the possibilety to do depreciation to an WBS.
Paul

DOWN PAYMENT AMOUNT FIELD NEEDS TO BE NOT MODIFIABLE IN PAYMENT REQUEST

Hi
In SAP, when Down Payment is called through Payment Request, the "amount" field will be changeable mode.
My client requirement is that, the amount field should be in "not modifiable" status.
Is there anyway that we can do this...using EXIT or something....
Thanks in advance...
Srikanth M

Hi,
system will not allow to change the Vendor line item.
F-47 Down pyamnet request 10000
f-48 you need to select the above request
and enter the 10000 in bank gl line.
you cannot change the vendor line while f-48.
i hope will clearify your issue.
reg
Mmadhu M

WBS element does not belong to business area(Message No: CJ067)

Hi All,
While doing Billing through DP91 by giving the Sales Order No.,
it is giving the error "WBS element *****does not belong to business area** ".
The configuration between Business Area and Plant in Enterprise Structure level is fine.
Do let us know anything else need to be done to resolve the same.
Needless to say that helpful replies will be awarded points.
Best Wishes & Regards,
Raj Kumar Reddy.

Hi Chandra,
Business Area was given both in CJ20N and Sales Order level.
Also both these business areas are same.
To be more clear:
Say in the error it has mentioned the business area as 'X'.
But in Sales Order and Project level, 'Y' has been maintained.
System is throwing 'X' error, because the same is maintained under Cost Center level.
I cannot change the business area in Cost Center to 'Y' because of my business restrictions.
Regards.,

How to change WBS Element in FI Entry for Asset

Hi all,
I have a scenario where an asset has been capitalized with WBS element 1. After several months we realized that it has to go to WBS element 2.
We update the Asset Master Data with a new WBS Element 2.
Depreciation from this date onwards is posted to WBS Element 2 (this is expected), but in FI the asset acquisition cost is still in WBS element 1.
Does anyone know how to rectify the FI document with correct WBS element i.e WBS Element 2
Any advice would be greatly appreciated
Regards
Pramod Saraswat

Hi Pramod,
In posted document you cant change the WBS element.
In order to post on WBS 2 , you have to reverse the acquisation entry posted on WBS1. Then update correct one in asset master then post acquisation.
Ravi

Custom Field in Asset Master Data

Dear Experts,
I want to ask about a problem I'm having when adding a new field in Asset Master Data ( AS01 & AS02 ).
I'm adding new field on the Time-dependent Tab. I already create the exit & the new custom field, and with the help of the functional registered the new field.
I'm using a new installed SAP GUI 7.3 .
The problem is that the new field doesn't appear when I access the tcode unless I click on the new field location.
The problem seem doesn't appear in SAP GUI 7.1 & 7.2.
Is there any setting that need to be done or this is the problem with the SAP GUI 7.3
Thank you.

Hi Karim
You can go through the steps below to customize the field u2018Planned. retirement onu2019
1, AS02 -> Menu: Environment -> screen layout -> Master data -> select layout and double click on Logic field group -> Select Logic field group 2 u2018Posting informationu2019 and double click on field group rules -> Change field group 13 to u2018Suppressed entry fieldu2019.
Alternatively
2, Use AO21 to customize the field as above.
Note: field u2018Planned. retirement onu2019 in asset master is connected to the function u2018Simulate up to planned retirement dateu2019 in asset reports. After field u2018Planned. retirement onu2019 of asset master data is deactivated, the function u2018Simulate up to planned retirement dateu2019 in asset report will be disabled.
Hope itu2019s helpful
George

SAP fixed asset add-on. Not able to import master data using upload pgm.

Hi all,
I am trying to import fixed asset master data using an excel file into sap B1 2007a patch level 42. I am able to run the import transaction. It tries to process and then giving me a message ' Import end: Number of successfully imported assets: 0. Number of processed assets:2. We have looked at the event log file and couldn't find anything related to the upload. I have gone through other posts and didn't face this issue. Any hellp is apreciated.
Path which I am using to upload the fixed asset master master data: Administration --> Setup --> fixed asset --> import fixed asset master data.
Following points (see below) also taken into account while creating the master data sheet.
also replaced the ',' in the csv file to ';' before uploading and changed the fixed asset mode to 'transfer' in the administration --> system initialization > company detaills> basis initialization.
Thanks
Johnson zavier
Mandatory:     Item Code = Asset Class; this Asset Class must be previous defined in the Asset Settings (don't change/delete anything in the item-master data - there are the Asset Classes Z-00u2026. Are stored
     Description = Description of this Asset
     Capitalization Date = do it like this (YYYY-MM-DD). This columne must be a text format
     APC = Aquisition/Procuction Cost; when you have digits after coma please use dot for separation - don't use thousand separators; Example 23444.45
     Quantity = only mandatory, when you use the same assets stored under one asset number. Example you have ten equal chairs, so you can handle this with one asset number and quantity ten
     Dep01 = Depreciation area; this entry must be previous defined in the Asset Settings
     Depr Start date 01 = do it like this (YYYY-MM-DD). This columne must be a text format. The beginning must be the first of the month. Please compare it in this case with the capitalization date
     Useful Life 01 = calculated in months (not years)
     Remaining Life 01 = calculated in months (not years)
     Depr Type 01 = Depreciation Type must be previous defined in the Asset settings
     Ordinary Depr 01 = ordinary depreciation; this is the comulated value you can see in the asset history sheet from the old asset solution. When you have digits after coma please use dot for separation - don't use thousand separators; Example 23444.45
     Unplanned Depr 01 = unplanned/extraordinary depreciation; this is the comulated value you can see in the asset history sheet from the old asset solution. When you have digits after coma please use dot for separation - don't use thousand separators; Example 23444.45
     SpDpAcc1 01 = Special depreciation account; when you use special depreciations and you have it to balance on special accounts fill in this account. This is an exeption - in normal projects not needed
     SpDpKey2 01 = Special depreciation; when you use special depreciation you have to enter this cumulative value in this field. This is an exeption in normal projects not needed
     SpDpAccu2026 = for further special depreciation accounts; This is an exeption
     SpDpKey.. = for furhter special depreciation values; This is an exeption
Optional:     Vendor Code = when using this please be aware that the vendor code is previous defined in the system
     all others = you can use if you want. The only limitation is the type/length of these fields
     When you are ready with your entries mark from the first free row on for instance the next 20 rows than right mouse key - delete rows. This is necessary to prevent that in the background are invisible signs
     After entering in this default excel all your assets, please save it as .csv file. (the grey message - relation to information of csv - please say yes; when you close than excel a furhter message - would you save.. - please say no now
     After entering all data please save it as .CSV file. First grey window (format information) please choose 'yes'. Second window (when you close this file) please choose 'no'.
     You have now a .csv file in hands right now for uploading into the fixed assets.
     This example you can use for a test-import based on the year 2004

The issue was because of the conflict of Depr. Start Date, Use Life and Remaining Life. After I corrected the data, it worked just fine. The note 876670 helped me to resolve this issue. Thanks to Adam at Toronto SAP Business one support for his expert analysis and suggestions.
thanks
johnson zavier
Edited by: Johnson Zavier on Feb 19, 2009 11:10 PM
Edited by: Johnson Zavier on Feb 19, 2009 11:20 PM

Investment order field is missing in origin tab of asset master (AuC)

Dear Experts,
While creating an asset master (AuC), the Investment Order field is not shown for the input, in the Origin Tab. Whereas for Asset master for the other Asset classes are showing this field for the input.
Please advice how can I get this field in the asset master under AuC asset class.
Thanks in advance in anticipation.
An early reply is well appreciated and properly rewarded with points.
Regards
Preethi

Hi,
First check the asset Scr.layout rule for asset class by using path -
Spro>Financial Accounting>Asset Accounting>Organizational Structures>Asset Classes-->Define Asset Classes
Select your asset class and check - asset Scr.layout rule .
Then go to -
Spro>Financial Accounting>Asset Accounting>Master Data>Screen Layout-->Define Screen Layout for Asset Master Data
Click on - Define Screen Layout for Asset Master Data
Select your Screen layout which you got earlier. In Logical Field group select 'Inv. account assignment'. and double click on field group rule.Then make required changes in 'Investment Order' as required - Required, optional, display.
Then check asset master data in AS02.

How to display field Functional Location Field in Asset Master Data

Dear Experts,
I really appreciate for your advices on how to display Functional Location Field in Asset Master data.
I have checked the configuration on path IMG:\Financial Accounting->Asset Accounting->Master Data->Screen Layout->Define Screen Layout for Master Data
I have chosen the screen layout and review all Logical Field Groups. And there's no field "Functional Location" is available. I also didn't find "Add New" button to add "Functional Location" field.
Thank you
Best regards,
Frans

Dear Frans,
I am sorry this is not possible.
Note 140482:
The field was created as a precaution. However, it is not being used at
present and consequently is not supplied.
In particular, you cannot use the field as a criterion for a selection
in Asset Accounting reporting. This is still true even if this field has
been included in the selection view delivered for the dynamic selections
by modification.
regards Bernhard

Useful life is asking mandatory field in asset master data

while asset master creation useful life is asking mandatory field in dep.key : ZSLU. actually i have to give "ZERO" in useful life field. i have set screen layout in AO21 also.again asking mandatory field. I got the one point, I think this is the problem,
Note: Base method 0011 (Ordinary: percentage from useful life) already assigned in dep. Key ZSLU. If we assigned in dep. key ZSLU, we should give positive values for useful life in asset master data.
I changed base method 0002 instead of 0011, it was accepted, If i change base method(0011),
i want base method instead of 0011?
which base method i have to give? please give suggestion?
Thanks
indu

Hi ,
i have changed optional field also. it's asking mandatory, i have tested base method 0002 instead of 0011. if i give 0002 or other base method, it is accepting.
Note: if we mention base method 0011, we must give passitive values in useful life.
what i have to do? please tell me?

Field in asset Master data "Planned retirement on / control

Hi all,
I would like to know how to deactivate the control for the field "Planned retirement on"?
The control is the following "Simulate only to planned retirement" indicator in the selection screen of the given standard report.
Where can I found this indicator?
Thanks for your help!
Cheers,
Karim

Hi Karim
You can go through the steps below to customize the field u2018Planned. retirement onu2019
1, AS02 -> Menu: Environment -> screen layout -> Master data -> select layout and double click on Logic field group -> Select Logic field group 2 u2018Posting informationu2019 and double click on field group rules -> Change field group 13 to u2018Suppressed entry fieldu2019.
Alternatively
2, Use AO21 to customize the field as above.
Note: field u2018Planned. retirement onu2019 in asset master is connected to the function u2018Simulate up to planned retirement dateu2019 in asset reports. After field u2018Planned. retirement onu2019 of asset master data is deactivated, the function u2018Simulate up to planned retirement dateu2019 in asset report will be disabled.
Hope itu2019s helpful
George

Field WBS element is not modifiable in asset master data

Similar Messages

Maybe you are looking for