Fields in DSO & Cube

Hi experts,
I have the field 0fiscyear in my dso and also in the cube. But
when creating transformation the field 0fiscyear is present in
the dso but not in the cube. So that i am unable to create
transformation for 0fiscyear.Anyone please explain me what
should i do to make the field visible in the cube.
And one more question. How can we select or hide the fields
of 0fi_ar_3.This data source is not visible in LBWE.
Full points will be assigned.
Thanks & Regards,
V N.

Hi VN,
    Goto SBIW->Application Specific>Logistics>manage extract struvctures>initialization->appl specific setup of statistical dat -->select inventory mangement perform setup>
in the select materil movement/Setup: Invoice Verification, Revaluation as per your choice to load.
direct transaction OLI1BW for material movement
OLIZBW for invoice verification
once you gets into statistical setup give name of the run and termination time and date to setup then gofor excution
once setup tables start loading gotoRSA3 which is extrac chekor to chk u r datasource data
before all this make sure your data source as active.
i hope this is clear na
mahesh
Edited by: Mahesh Kumar on May 19, 2008 7:00 AM
Edited by: Mahesh Kumar on May 19, 2008 7:01 AM

Similar Messages

  • Reg Data fields in DSO

    Hello SAP Guru's!!!!
    I have some doubt on maximum number of data fields in DSO. I gone through so many threads on SCN, but could not clarify my doubt.
    The max no of key fields in DSO is -- 16
    Max no of data fields in DSO is --749.
    But i read in some of the scn documents  a table can have maximum 256 columns .
    DSO is also like a two dimensional table which can also have the same properties of a two dimensional table.
    if the above statement of mine is correct.. the number of columns in a DSO is 256 columns = 16(primary key)+240 (data fields--non key fields)
    but how come 749 data fields (max) will be there ? if it is so ... the max no of  fields will be  749+16 = 765.
    I need some clarification on this ....
    Awaiting for your responses!!!!
    regards,
    vamshi

    Hi Rajavamshi,
    For DSO:
    1. See for Standard DSO we have Key fields & Data Fields will be there
    2. Key Fields will store only Characterisitc Info Objects, maximum no.of characteristic info object we can add here was 16
    3. But in Data fields we can add both Characterstics & Keyfigure infoobjects, Max of 749 data fields we can add here.
    4. Atleast one field should be there in either Key fields & Data fields.
    For InfoCube :
    1. Info cube structure will be having the 16 Dimensions and the Key Fields.
    2. In that 16 Dimensions 13 User defined and the 3 pre defined dimensions.
    3. One user defined Dimension will maximum can hold 248 Characteristics Info Object, not the Keyfigure Info Object here.
    4. But the Key Fields here will store maximum will hold 233 Key Figure Info Object.
    Thanks..!!
    Regards,
    Harish. K

  • Adding fields into DSO in the Key Fields

    Hello Experts,
    I am using a Cube which loads data from DSO. Now, for some requirement I have to add one field into DSO in the key  fields Part. But DSO already has 16 fields which I cannot remove.
    So how can I add one more field into DSO in this case?
    The cube I am using is 0FIGL_C10 and the DSO is 0FIGL_O10.
    Regards,
    Nirav Shah

    You can create an Infoobject - acts as a custom key to concatenate multiple fields into one and make it a keyfield.
    15 fields + custom key ( concatenate 2 fields ) = 16 Keyfields
    Procedure  - > Example
    16th Key - > RVERS-Version-CHAR-3-0VERSION
    17th Key - > RMVCT-TransactnType- CHAR-3-0MOVE_TYPE
    1. Create one infoobject - ZKEY - Length = 6 ( add lenghts of the two objects)
    2. Make ZKEY as a keyfield for the DSO.
    3. Make 16th Key and 17th Key datafields.
    Create a routine for ZKEY in the transformation or transfer rules to concatenate values coming from source into one.
    TRFN Routine
    Concatenate SOURCE_FIELDS-RVERS SOURCE_FIELDS-RMVCT into RESULT.
    Or
    Transfer Rules Routine
    Concatenate COMM_STRUCTURE-RVERS COMM_STRUCTURE-RMVCT into RESULT.
    This way nodata will be lost/overwritten due to less number of keyfields in the DSO.
    We have as many as 21 Keyfields for GL Totals DSO.

  • Check if a DSO has been lookup by other DSO/cube in start/end routine

    I have to support on of the client system which I am not part of the development.
    I found one DSO has been schedule to load data in daily process chain but it is not update to any target.
    Is it possible to check if this DSO has been using in the staging  i.e look up the reference field by other cube/DSO in start or end routine ?

    Hi,
    Possible by invoking respective field into code part.
    I think not much stuff required in this regard.
    Thanks - RK

  • Adding fields to 0IC_C03 cube

    Hi friends,
    I have to add some fields into 0IC_C03 cube. The fields are reson for movement ,special stock indicator,sales order etc. They are cmg in the datasource 2lis_03_bf. I did add them and load the data , but the data was not coming properly. Is there any other method by which i can make use of these fields without adding them in the cube and make a multiprovider on that. I need to have the customer field also. Will this data come if i make a multiprovider on top of this . Can i make a generic datasource from the table which is giving these fields and make a DSO with these fields and make a multiprovider on it.
    Will the key date concept work on this .
    I would appreciate ur help.
    Thanks,
    Kapil

    Dear Kapil,
    Pleae go through the link provided bleow hope this wil help full.
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328
    Cheers,
    VEERU.

  • Data fields in dso

    Hi
    If I need to calculate amount based on source and destination,and if these two source and destination fields char are there in data fields of dso and keyfigure amount is also in data fields of DSO can we get exact value if make report on this.
    thx
    rubane

    Actually i need to build report where in rows there will be some char
    like source plant and destination plant and in rows on the basis of source and destination the cummulated value of amount base on some other few restriction
    now my question is :-
    acc to my need I need to make genric extractor but one is already there which contains all my fields. now can i use the same extractor,but the worry is ;these all feilds are first going in dso and all are there in data fields coloumn
    What I'm thinking is; it will suppress or accumulte records on the basis of key field's(as usual).
    so can you pls let me know what to do in this scenario?
    how to build a new report using existing extractor ;can i use existing one?
    rubane

  • Fields in the cube

    Hi Experts
    Here client wants 200 fields in cube
    whether that is suggestable help me in this
    Regards
    Anand

    Hi,
    Its possible to have that many fields in the cube, but you have to consider what the reporting requirements are and how the data is connected, etc. You also have to consider how much data volume is going to be generated and at what level you are going to store the data in the cube. If your client is suggesting you to have line item level or granular data in your cube , suggest to them to have that in an ODS and provide jump queries from the cube to the ODS if necessary.
    If many of the fields are not going to be required for reporting at present or in the future, suggest to the client to have them in the ODS and a smaller subset of the fields in the cubes.
    Cheers,
    Kedar

  • Data Fields & Key Fields IN DSO

    Hi Guys,
    Can any one tel me what exactly key field holds & Data field hold in DSO.
    Thanks,
    Venkatesh

    Hi,
    A DSO serves as a storage location for consolidated and cleansed transaction data or master data on a document (atomic) level. This data can be evaluated using a BEx query.
    A DSO contains
    Key fields (such as document number, document item) and data fields that, in addition to key figures, can also contain character fields (such as order status, customer). The data from a DataStore object can be updated with a delta update into InfoCubes (standard) and/or other DataStore objects or master data tables (attributes or texts) in the same system or across different systems.
    Key fields : It will contains both Chars and KeyFigures.
    Data Fields : Based on this i.e. the charecterisctics which you will keep in this Data Fields, the DSO will over write the Data in DSO.
    Overwriting functionality will works based on Data Fileds.
    http://help.sap.com/saphelp_nw2004s/helpdata/en/f9/45503c242b4a67e10000000a114084/content.htm
    Thanks
    Reddy

  • Adding new fields to existing cube

    Hi all,
    We have a cube with data, now we added 2 new fields to the datasource. And want to add two more fields in the Cube to correspond to the new fields. What would be the impact on the data that is already there in the cube? Can I go ahead and add the fields in the cube and start extracting data? What I want to know is what would be the implications in such a scenario?
    Any insight or help would be appreciated and fully rewarded.
    Thanks,
    Mav

    Hi,
    At least from the experience I had there were no performance issues. The only issue would be in terms of the time taken to transport. The larger the amount of data ,longer the transport time.
    You can continue extraction of data for those 2 fields from that point on. No need to empty the data from the cube and reload again. Only thing is that the data in the past for these 2 fields may not be mapped to the existing data in the cube. If you want to do that dump the cube and reload. Otherwise the data will be mapped from the time you start extracting the new fields with the data in the cube.
    Cheers,
    Kedar

  • Miximum no of fields in DSO

    Hi All,
    Can you please provide me info:
    How many maximum KeyFields a DSO can have?
    How many maximum datafileds a DSO Can have?
    basically is there any restrictions on no of fields for DSO like Infocube?
    Your information is greatly appreciated.
    Regards,
    Ravi

    Hello,
    Yes its there..
    you can have maximum 16 keys for an oracle table therefore you can have only 16 keys for the DSO.
    Also depending upon the maximum size of the data blocks the maximum number of data fields is 749.
    check this thread.
    http://help.sap.com/saphelp_nw04/helpdata/en/4a/e71f39488fee0ce10000000a114084/content.htm
    Not sure if this has chnaged recently but should hold true.
    Thanks
    Ajeet

  • Key fields of DSO

    Hi Experts,
    I have a issue with DSO.We extracted data from R/3 in to BI and send it in to DSO.We are getting data from R/3 to PSA with right records with init load.But from PSA to DSO,we are getting duplicate records for 2 invoices.We have 2 invoices say xxxx01 and xxxx02 have problems in DSO.
    XXXX01 has 3 items(10,20,30) created on April2008 with billing Doc type A
    XXXX02 has 2 Items(10,11) created on April2008 with billing Doc type B
    But in DSO we are getting extra Item record for each of document
    i.e XXXX 01 has 4items(10,20,30,10).3 items(10,20,30) created on April 2008 with billing Doc type A.One Item(10) created on June 2008 with billing Doc Type C(this is not in R/3 so This extra one).
    XXXX02 has 3 items(10,11,10) .First 2Items(10,20) are original ones created on April 2008 with Billing type B.One extra Item(10) created on June 2008 with Billing Doc Type C(this Item is not in R/3).
    We have key fields in DSO is Sales Document,Material,Billing Item,Fiscal variant.I din't add Document Type,Document Category,Calender day in Key Fields but they are in Data Fields.
    I am not sure how can I overcome this issue either adding Document type ,Calender day,Document Category in DSO or Put some fields in Semantic group.
    Please advise me and tell me some possible solutions.
    We ran setup tables with init and ran infoPackage and ran delta Infopackage too in Testing box.If I change the design in Dev box and Transport in to  the test box,Hope I need to fill the Setup tables again right.Please advise me.
    Thanks,
    Ran.

    Hi,
    Use this key fields and sure it will solve.
    Doc no.,Doc Item. for Orders
    Bill Item and Bill no. for Invoices
    Delivery No. and Delivery item no. for deliveries.
    Moreover check ur transformations once.
    Cheers,
    shana

  • Addition of a field in a cube

    Hi
    I would like to know if I can add a field in a cube without deleting the data as I dont want previous data for this added field. I am just interested in the new data coming through Delta in the cube.
    Many Thanks.
    Kind Regards,
    Kate

    Hi Kate,
    You can proceed without deleting the data if you have the liberty of adding a new dimension and putting this char in the new dimension.
    If this is not possible then you can refer to the loopback process: create new cube > move data to the new cube > delete data from old cube > change and activate old cube > move data back to original cube.
    /people/dinesh.lalchand/blog/2006/02/07/loopback-process--follow-up
    Hope this helps...

  • Significant of key field in Info cube table

    Hi,
    what is significant of key field in Info cube table?
    Best regards,
    dushyant.

    hi ,
          key figures are very important in tables, when it is in cube it act as dimensions
    for the reporting purpose see this scenario
    the table has following fields
    student no
    student name
    student attendance
    student mark
    in this scenario when we want report according to student no its normal we would get, but when we want according to attendance,marks we dont get report according to attendance and mark, so we put all those fields in key fields.
    So we could say that Key fields are the dimensions and according to this we get reports
    thank yu

  • Creation of field in the cube level

    hi
    There is one cube in which i have to create one field which field is already in the source but not in the target level and the  most importantly  this cube is working cube data is loadng into it i we have to remodle this cube
    so can any body tell without any distubance how we can add this fiel into the cube and map with the source and finally reflect in
    the report
    regards
    gurkiran

    Hi Gurkiran,
    You don't mention your BW release, if you have 7.x then there is a remodeling function to do this, just GOTO
    RSA1, right click on the cube, select 'additional functions' and then you have the 'remodeling' option.
    If you have a 3.x release then you could have the problem that there is an inconsistency between the
    DB and the ABAP dictionary if you try and add a field to a cube that has data already, in this case
    it is better create a copy of the cube, generate an export datasource on the cube and load the data
    to the copy cube, then delete the data from your original cube, make the change of adding the field
    and then load the data back from the copy cube.
    I hope the above helps.
    Best Regards,
    Des

  • New field added to cube, delta DTP from DSO to cube is failing

    Dear all,
    Scenerio in BI 7.0 is;
    data source -delta IPs-> DSO -
    delta DTP---> Cube.
    Data load using proces chain daily.
    We added new field to Cube --> transformation from DSO to cube is active, transport was successful.
    Now, delta from DSO to cube is failing.
    Error is: Dereferencing of the NULL reference,
    Error while extracting from source <DSO name>
    Inconsistent input parameter (parameter: Fieldname, value DATAPAKID)
    my conclusion, system is unable to load delta due to new field. And it wants us to initialize it again ( am i right ?)
    Do I have only one choice of deleting data from cube & perform init dtp again ? or any other way ?
    Thanks in advance!
    Regards,
    Akshay Harshe

    Hi Durgesh / Murli,
    Thanks for quick response.
    @ durgesh: we have mapped existing DSO field to a new field in cube. So yes in DTP I can see the field in filter. So I have to do re-init.
    @ Murli: everything is active.
    Actully there are further complications as the cube has many more sources, so wanted to avoid seletive deletion.
    Regards,
    Akshay

Maybe you are looking for

  • Master Data Text Used as Line Items in ODS

    Hi Experts! </br></br> I would just like to know if I can use the text I loaded of master data Revenue Type from R/3 in BW? </br></br> What I have done already is that I have created a customized extractor in R/3 under the CO-PA-IO node in RSA6 (sinc

  • How to Archive and Purge SLA data?

    We are looking for a solution to archive and purge SLA tables. I have opened an SR with Oracle and they suggested to work with third party who specialized in archiving and purging data. I would like to see if any of the clients have developed a custo

  • Unexpected NFSv4 permissions behaviour

    I used to successfully mount my Arch desktop drives on my Ubuntu laptop, using NFS. Recently I switched my laptop (which is my production machine for work) to Arch as well. Since the desktop is configured as the NFS server, I assumed it was simply a

  • Correlated Queries in OWB?

    Hi I have a query like Select HL.LOCATION_ID,      HL.DESCRIPTION,      HL.LOCATION_CODE,      HL.ADDRESS_LINE_1,      HL.ADDRESS_LINE_2,      HL.ADDRESS_LINE_3,      HL.TOWN_OR_CITY,      HL.COUNTRY,      HL.REGION_1,      HL.REGION_2,      HL.REGIO

  • Just Starting to get serious about PhotoShop

    Quickly, I have been a film and darkroom photographer since 1969. I kept my darkroom up and running until 2005 when I closed it and started sending my commercial work out for processing. It wasn't until 2007 that I purchased a DSLR and that was only