Figures (Screenshots with Callouts) - Create Externally or Internally?

Hello All,
I use several programs for creating technical documents, including FrameMaker, Word, OpenOffice Writer, and recently Tex/LaTeX. I usually import graphics (png files) by reference and use built-in tools to add callouts to screenshots for figures.
When using LaTeX I create the figures using Scribus or Illustrator, export an EPS file, and either import the EPS figure or create a PDF from the EPS and then import the PDF figure.
This technique works fine and I am now thinking about using this method for all applications instead of importing a graphic by reference and adding callouts with the built-in tools. It is a bit more time consuming, but I like the idea of being able to use the figures in multiple programs over time without having to recreate them within each application.
I am looking for opinions/feedback on the good vs bad points of each method.
Thanks,
Steve

Let me try to summarize the good(+)/bad(-) points for you:
Method 1: Create images without call-outs, add call-outs in
each authoring tool:
+ Good for images that may be imported at varying sizes,
since the call-outs won't be resized with the image
+ Good for images that you may wish to use without call-outs
+ Possible to have different call-outs in different documents
+ May be easier if you need to translate textual call-outs
- Call-outs need to be re-inserted in each tool/document
- Call-out appearance may differ due to different tool capabilities
Method 2: Create images with call-outs directly in graphic software:
+ Only need to insert call-outs once
+ Call-outs will look the same in all documents
- Resizing the image will also resize the call-outs
- Images will always have call-outs, and the same call-outs in all docs
- Translators will need to translate text in two different places
(body text in document, textual call-outs in images)
For translation purposes, it's always better to use numbered or
alphanumeric-coded call-outs and add the actual call-out text
outside the image (in the document). For method 1, this requires
all call-out codes to always be the same.
So, if you *always* will have the same call-outs for an image,
and all (or most) images always will be imported at the same
relative size, method 2 may be the way to go.
If you think you may want to use some images without call-outs,
or have different call-outs in some documents, or size the
images differently within a document, then method 1 may be best.
/Thomas Michanek

Similar Messages

How to read the content from a External Content Type with out creating External List in Sharepoint 2013?

Hi,
I have a requirement to read the External Content Type and storing the Data in a Session Variable. The Reading of the content from External Content Type with out creating a External List.
Please help I am trying to find the solution, but unable to do that.
Thanks,
Pradeep

Hi,
Firstly an external content type designed to work with SharePoint list and there is no way to read apart from this.
If you are looking the solution out of the " Business Connectivity" then find that data source has been exposed through WCF and Web Service ?
So you can use REST API and CSOM to consume those data in SharePoint.
You can also leverage the ADO.NET option if the datasources based on MS technologies.
Murugesa Pandian| MCPD | MCTS |SharePoint 2010

Error while Creating External definition with WSDL file

Hi ALL,
I need to create a External defination with a WSDL file in PI 7.1.so i selected the Option WSDL & From all available message defination while creating External defination & imported the WSDL file.
I am getting an error
javax.ejb.EJBException: nested exception is: java.lang.RuntimeException: java.lang.NoSuchMethodError: com.sap.aii.utilxi.wsdl.api.WsdlHandler.parseWsdlWithOrderRearrange(Lcom/sap/aii/utilxi/xml/xdom/XElement;Z)Lcom/sap/aii/utilxi/wsdl/api/Wsdl; java.lang.RuntimeException: java.lang.NoSuchMethodError:
Note : i checked the WSDl file in altova its no error's ,i know there is no problem with the WSDL file ,i tried importing the same in other XI 3.0 system it has no problem.
help me in solving this ..
Regards
Shakeif

Hi Tony,
Somehow I solved this issue. I dont remember what exactly I did, as it was sometime back in December. I think I used the Wizard initially to do the configurations in Solution Manager and again i tried to do the same manually as the earlier one threw some errors.
It seems the wizard proceeded half-way through and hence the entry was made in the database already and hence that error.
Anyways thank you for replying me.
best regds,
Alagammai.

Create external window with webdynpro application

Hi,
is it possible to create an external window with another application?
The method if_wd_window_manager~create_window_for_cmp_usage would be great. But this method create only a modal popup.
Greetings
Marcus

Hi,
We can create external window using below method.
lo_api_component   = wd_comp_controller->wd_get_api( ).
lo_window_manager = lo_api_component->get_window_manager( ).
lo_window          = lo_window_manager->create_external_window(
        url          = l_url( "URL of the webdynpro application")
        title        = 'Submitted candidate'
        has_menubar = abap_false
        has_toolbar = abap_false
        has_location = abap_false ).
lo_window->open( ).
Regards,
Lakshmi.

Create an internal table with the rows of another internal table.

Hi I want to know if posible to create an internal table structure with the rows of another internal table?
ex.
If in i_tab column A has this values: row 1 = first, row 2 = second, row 3 = third.
Now I want that the structure of my internal table be: first, second, third

Hi,
If you do this way then what will be the difference between the two table anyway?? First internal table has the same structure irrespective of which row you select. and you are going to store the data from each row to the rows of the second internal table. In that case, the structure of the internal table is the same as first table. and it would have same rows.
Am I missing something here? or you want to declare the internal table with each field being the structure of the first table? In this case you'd have to do a dynamic declaration of data as the first table can have any no of rows then the second table would have any no of fields in the structure.
Now if you know that your first internal table is going to have a fixed no of rows eg 3 rows then it becomes simple. Do the following then
Data: begin of second_table occurs 0,
first type <first_table type>,
second type <first_table type>,
third type <first_table type>,
end of second_table.
Regards
Prasenjit

Hi - Re Keynote I'm trying to figure out how to create a music album on USB flash drive. What I want is a background picture with 'click-buttons' to play each track listed, also similar for embedded videos and photos etc. Is this possible with Keynote ?

Hi - Re Keynote I'm trying to figure out how to create a music album (as an artist) on USB flash drive, (accessible by both Mac and PC). What I want is a background picture with 'click-buttons' to play each track listed, and play in order (like a cd) - also similar for embedded videos and photos etc. This should all be on the one page.
Is this possible with Keynote, or any other software package for Mac (am using Macbook Pro) ?
Gav 88

Hi there,
Yikes, it sounds like you've been doing a lot of work on this project... Unfortunately, however, this isn't the Adobe Encore forum, but the Acrobat.com forum. While it seems like an exciting question, we're not able to address issues pertaining to other Adobe products and services. Here's a link to the Adobe Encore forum, where you're more likely to get help for this specific issue:
http://forums.adobe.com/community/encore
Sorry not to be of more specific help to you. Best of luck!
Kind regards,
Rebecca

Prob creating ABAP Proxy-Interface use external and interna msg definition

Hi,
I've created a service interface using external definition (message type for request and response), imported via WSDL file. However, while creating ABAP proxy in SPROXY, it gave the error message "Interface uses external and internal message definition". I searched through the forum, the questions were raised but no definite answer was found. Is it not possible to generate a proxy if there is any external definition used?
Details of the error message:
Message no. SPRX122
Diagnosis
In a message interface you can use messages from different sources:
Message types and fault message types edited in the Enterprise Services Repository
Messages imported into the Enterprise Services Repository (external definitions, RFC, IDoc)
In the current message interface, message types from different sources have been used. Since messages from these different sources must be handled differently during proxy generation, such a mixture of messages within a message interface is not possible.
System Response
The interface cannot be generated.
Procedure
Change the interface definition accordingly in the Enterprise Services Repository.
p/s: My external definition is actually derived from a ABAP FM web service. The reason why i used external definition is that i try to avoid the tedious steps of hard-coding all the data types for the request and response message types.
Any help would be highly appreciated.
- julius

Hi Arvind,
For technical reasons, proxy generation and the respective editors in the Integration Builder do not support the entire language range of XML schema and WSDL. For an overview of which language elements are supported, see the Excel spreadsheet in the SAP Service Marketplace at service.sap.com/xi ® Media Library ® Documentation: SAP XI 3.0 (SP11) u2013 Supported XML Schema and WSDL (EN).
I couldnt find the above document in the service market place. Any hint to find it?
Thanks.
- julius

HT3986 can bootcamp be used with Windows install disk on an external drive (internal is broken) ?

can bootcamp be used with Windows install disk on an external drive (internal is broken) ?

With Boot Camp, you must install Windows onto in internal HDD (or SSD). If you are referring that your internal Optical drive is broken, you might be able to install Windows from an external drive, but you might not. I have heard varying levels of success with that. I'm not sure what the official stance is, but I do know that if youe machine shipped with an internal optical drive, then you must use that to install Windows using Boot Camp and not swap it out for a "data doubler" and try to install from an external optical drive.

Error while creating external table

Hi i tried to create external table. The table is created but while selecting that table it is throwing below errors
ORA-29913: error in executing ODCIEXTTABLEOPEN callout
ORA-29400: data cartridge error
KUP-04040: file Countries1.txt in EXT_TABLES not found
ORA-06512: at "SYS.ORACLE_LOADER", line 19I've created temp directory in window under oracle directory " C:\oracle\product\10.2.0\temp"
In the temp directory i've a text file countries1.txt
the text file has the below information
ENG,England,English
SCO,Scotland,English
IRE,Ireland,English
WAL,Wales,WelshI've connected to system user and created one directory and granted the read and write permissions to user SCOTT.
SQL> create or replace directory ext_tables as 'C:\oracle\product\10.2.0\temp\';
Directory created.
SQL> grant read,write on directory ext_tables to scott;
Grant succeeded.The creation of external table query is
CREATE TABLE countries_ext (
country_code      VARCHAR2(5),
country_name      VARCHAR2(50),
country_language VARCHAR2(50)
ORGANIZATION EXTERNAL (
TYPE ORACLE_LOADER
DEFAULT DIRECTORY ext_tables
ACCESS PARAMETERS (
    RECORDS DELIMITED BY NEWLINE
    FIELDS TERMINATED BY ','
    MISSING FIELD VALUES ARE NULL
      country_code      CHAR(5),
      country_name      CHAR(50),
      country_language CHAR(50)
LOCATION ('Countries1.txt')
PARALLEL 5
REJECT LIMIT UNLIMITED;And the error is
SQL> select *from countries_ext;
select *from countries_ext
ERROR at line 1:
ORA-29913: error in executing ODCIEXTTABLEOPEN callout
ORA-29400: data cartridge error
KUP-04040: file Countries1.txt in EXT_TABLES not found
ORA-06512: at "SYS.ORACLE_LOADER", line 19
SQL> Please help me in this

You are missing something. Most probably the file does not exists in your specified path. This is working in my 10.2.0.3
Step1: Check the file is actually there.
C:\oracle\product\10.2.0>mkdir temp
C:\oracle\product\10.2.0>cd temp
C:\oracle\product\10.2.0\temp>dir
Volume in drive C is C_Drive
Volume Serial Number is 8A93-1441
Directory of C:\oracle\product\10.2.0\temp
07/30/2011 12:00 PM    <DIR>          .
07/30/2011 12:00 PM    <DIR>          ..
07/30/2011 12:00 PM                79 countries1.txt
               1 File(s)             79 bytes
               2 Dir(s) 50,110,582,784 bytes free
C:\oracle\product\10.2.0\temp>type countries1.txt
ENG,England,English
SCO,Scotland,English
IRE,Ireland,English
WAL,Wales,Welsh
C:\oracle\product\10.2.0\temp>Step 2: Creating the directory object.
SQL> show user
USER is "SYS"
SQL> SELECT * FROM v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - Prod
PL/SQL Release 10.2.0.3.0 - Production
CORE    10.2.0.3.0      Production
TNS for 32-bit Windows: Version 10.2.0.3.0 - Production
NLSRTL Version 10.2.0.3.0 - Production
SQL> create or replace directory ext_tables as 'C:\oracle\product\10.2.0\temp';
Directory created.
SQL> grant read,write on directory ext_tables to scott;
Grant succeeded.
SQL>Step 3: Table definition.
C:\>sqlplus scott@orclsb/tiger
SQL*Plus: Release 10.1.0.4.2 - Production on Sat Jul 30 12:04:24 2011
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL> CREATE TABLE countries_ext (
2    country_code      VARCHAR2(5),
3    country_name      VARCHAR2(50),
4    country_language VARCHAR2(50)
5 )
6 ORGANIZATION EXTERNAL (
7    TYPE ORACLE_LOADER
8    DEFAULT DIRECTORY ext_tables
9    ACCESS PARAMETERS (
10      RECORDS DELIMITED BY NEWLINE
11      FIELDS TERMINATED BY ','
12      MISSING FIELD VALUES ARE NULL
13      (
14        country_code      CHAR(5),
15        country_name      CHAR(50),
16        country_language CHAR(50)
17      )
18    )
19    LOCATION ('Countries1.txt')
20 )
21 PARALLEL 5
22 REJECT LIMIT UNLIMITED;
Table created.
SQL> SELECT * FROM countries_ext;
COUNT COUNTRY_NAME
COUNTRY_LANGUAGE
ENG   England
English
SCO   Scotland
English
IRE   Ireland
English
COUNT COUNTRY_NAME
COUNTRY_LANGUAGE
WAL   Wales
Welsh

What's the easiest way to add storage to a mac mini. (1TB hard drive but only 32G of real storage). External device, internal or partitioning?

What's the easiest way to add storage to a mac mini. (1TB hard drive but only 32G of real storage). External device, internal or is there some way to partition? I tried doing so but received a message that there wasn't enough free space to partition. Seems like a 1TB drive should have more storage than my Ipad

Its worth confirming what free space you have on your drive:
go to: Apple Menu > About this Mac > More Info > Storage
The bar chart shows how much free space there is on the drive:
Please realise that partitioning does not create extra space so this wont help you.
If your free space is less than 20 % you should get extra storage with an external USB or Firewire drive, any make or model will work.

Success with adding an external eSATA drive to a Verizon FIOS DVR

August 4, 2012 - Success with adding an external eSATA drive to a Verizon FIOS DVR
I just upgraded from a Comcast DVR to a Verizon FIOS DVR. I upgraded because my old DVR was limited to 500GB (1/2 TB) on the internal drive and the new FIOS DVR allowed for a much larger external eSATA drive. Selecting a viable external drive for the FIOS DVR was easier said than done. The three drives listed on the Verizon web site as compatible with FIOS DVRs are no longer manufactured by western digital and are not available on the market.
The DVR that I received from Verizon was a Cisco "CHS 435 HD DVR" that came with a 500GB (1/2 TB) internal drive. This is one of their "Multi-Room DVRs" that allows other set top boxes (not DVRs) to watch videos recorded on it.
I selected a western digital "WD30EURS" eSATA disk drive because it was a follow on product to one of the three listed as acceptable by Verzion on their web page and it was 3TB in size. I ordered from amazon.com for $170.99. This drive is a "bare drive" so it does not come with an external encloser or a eSATA cable.
According to the Western Digial web site this is a AV-GP drive: "These drives are designed to last in high temperature always-on, streaming digital audio/video environments such as PVR/DVR, IPTV, and video surveillance systems."
http://www.wdc.com/wdproducts/library/AAG/ENG/2178-771131.pdf
I got a "Macally G-S350SU Hi-Speed eSata/USB2.0 External Storage Enclosure for 3.5inch SATA HDD" to hold the drive for $34.39. I chose this one because it does not use a fan that could cause continious noise. The box is made out of metal so it cools itself as long as it is exposed to air (not covered up). This box comes with an external power supply that has a small transformer that plugs into a wall outlet.
Then I needed a eSATA cable. I got a "StarTech 6-Feet Shielded External eSATA Cable M/M (ESATA6)" for $6.50 and a 3-foot version for $5.90. I went with the longer one so that the cable would be less likely to become accidentally unplugged if I need to move the drive or the DVR. The cables and the drive houseing came from the same Amazon provider so it saved me on shipping. The drive came from Amazon/Western Digial directly but they do not have external housings or eSATA cables on that site.
The total cost was $255.56 including shipping for all these items.
I went with the largest (3TB) drive from western digial's AV-GP line to avoid a future upgrade from a smaller drive to a larger drive. There is no way to copy videos from one external eSATA drive to another drive because they are formatted by the FIOS DVR in a propriatary format. That would mean that any future upgrade would require losing all recorded files during an upgrade. That also means that there is no way to back up the contents of the drive to protect yourself from hard drive failure.
The installer who setup the DVR did not want me to plug in the drive while he was there and explained that I was on my own when I attached this kind of personal device to the DVR. When I plugged in the new eSATA drive it was automatically discovered. I was asked by the DVR if I wanted to format the new drive. I answered yes and within 2 hours the drive completed formatting. I did not watch the boring format so it could have finished faster.
When I started recording new videos they go directly to the external drive automatically and avoids the internal drive. It had no trouble recording two HD shows and playing a recording at the same time. I now have 20 hours of HD video recorded and the 3TB external drive is 17% full. So far my experience with the external drive has been great. No problems or issues. Learning the new remote control, new DVR menu system, and web browser control of the DVR from a laptop is another story. It will take some time to figure out how to make all the new features work.
It took me a while to figure out how to make this work since the verizon web site made useless suggestions and pointed me to products that are not available any more. I could not tell if this really would work until I plugged it in and then I was pleasantly suprised that it did. I have had this working for 3 days without any issues. I hope this post makes it easier for you to add an external eSATA drive to your DVR.
Here are the three items ordered from Amazon to make this work:
Western Digital 3 TB AV-GP 3 TB SATA 2 Intellipower 64 MB Cache Bulk/OEM 3.5-Inch Internal Bare Driv...
Macally G-S350SU Hi-Speed eSata/USB2.0 External Storage Enclosure for 3.5inch SATA HDD
StarTech 6-Feet Shielded External eSATA Cable M/M (ESATA6)

You are right. I can only access 2TB of my 3TB external drive. That gives me a total of 2.5 TB counting the internal (0.5 TB) and external (2.0 TB) drives. This is a significant improvement over the just the 0.5 TB internal drive. I have not been able to find a reason for this limitation. Cisco and Verizon do not mention any limits that I can find. I hope that a future BIOS upgrade could provide access to more space but this would probably require me to reformat the drive and lose everything recorded.
I paid $170.99 for the 3 TB WD30EURS drive at amazon. I could have gotten away with spending only $116.99 for the 2 TB WD20EURS drive. Not worth returning at this point so I will stay with it. Makes me glad I didn't buy the most expensive 6 TB external monster drive available from another company.
I bought: 3TB drive: Western Digital 3 TB AV-GP 3 TB SATA 2 Intellipower 64 MB Cache Bulk/OEM 3.5-Inch Internal Bare Drive WD30EURS by Western Digital
I could have bought: 2TB drive: Western Digital AV-GP 2 TB SATA II Intellipower 64 MB Cache Bulk/OEM Internal Hard Drive - WD20EURS by Western Digital
Details of what I learned:
The external 2 TB drive now has 41 hours of HD video recorded and claims to be 34% full (66% free). My estimate would allow me to have aprox 120 hours of HD on the external drive (2TB) and 30 hours of HD on the internal drive (500GB) for a total of 150 hours of HD. This will keep me happy for the near future.
There is a hidden "diagnostic menu" that is not normally accessible or documented by CISCO or Verizon. This menu has a lot of interesting info on the inner working of the DVR. There was an obscure reference to this menu on another forum.
To access this diagnostics menu:
1) Get the DVR into normal live tv mode (no menu, no guide, no pause ...)
2) Go to the Cisco CHS 435 HD DVR (not the remote control) and press these buttons on the front of the DVR: Press both the Left Arrow "<-" button and "OK" button at the same time and hold them both down for aprox 5 seconds.
3) The "Verizon FiOS TV Diagnostics Menu" menu will appear. The menu can then be used by the remote control.
4) I chose "D03 Memory / HDD" and then "Hard Disk Information" and finally "OK"
A five page disk report appeared. With a little bit of interpretation I discovered:
The Internal Drive is know as "drive 1/hdc1" has 461 GB total space with 454 GB free.
The External Drive is split into two partitions "hdc2" and "hdc3" (aka two mount points).
"drive 2/hdc2" has 1007 MB total with 317 GB free
"drive 3/hdc3" has 1007 MB total with 974 GB free
The normal DVR menu has an "Eject" feature that allows you to stop the external drive and make it safe to remove it from the DVR without losing anything via an unplanned drive removal. This can be found at "DVR" button on remote then "Settings"->"External Hard Drive"->"Eject".

Lync 2013 external to internal IM is slow or messages do not arrive

Hi,
I'm building a Lync 2013 setup on Windows Server 2012. Internal Lync 2013 standard server with Lync 2013 edge server in a DMZ. No federation.
Internally al users are able to chat, audio/video and conferance.
My problem is that external users are able to sign in and start a chat with an internal user but it looks like communication is only working in one way.
Example:
User 1 is external;
User 2 is internal;
User 1 starts IM with user 2 and says "hi"
User 2 receives the IM and accepts and is seeing the "Hi" messages from user 1.
User 2 reply's with "Hi" back and that messages does not arrive at user 2. Some time's not at all, some times after a minute or 2.
When user 1 is receiving the reply user 2 still see's the rotating dot's that the message is beeing send. and after a while user 2 receives: "This message may not have been sent to User1
because there was no response from the server."
The situation seems to occures only from internally to externally and also with both users externally. I cannot see any error's in the event logs of the Internal or Edge server. De debugging tools is showing me error's like:
Text: Message or one of its headers caused SIP transaction processing error
Result-Code: 0xc3e93f5b SIPPROXY_E_TRANSACTION_TIMEOUT
Text: Message was discarded by the application
Result-Code: 0xc3e93ec6 SIP_E_AUTH_CANNOT_CHALLENGE
Audio/video requests are also arriving at the other user but are unable to establish a connection.
I can't really figure out what is going wrong. Certificates are correct, i think firewall rules are in place otherwise i have no communication at all i'm guessing. Routes also seem ok.
Some help would be great
Regards
Pascal

Hi,
The internal user Lynctest is sending a message to pslijkerman who is connected externally.
User pslijkerman receives the messages but the lynctest user keeps seeing rotating dots (processing message or something) after 1 minute or so the following messages is displayed in the Lync Im screen for user lynctest.
======
This message may not have been sent to Pascal Slijkerman because there was no response from the server.
======
This is some logging from the internal lync server.
===========
TL_INFO(TF_PROTOCOL) [0]226C.2528::04/09/2013-07:53:17.056.0013034f (SIPStack,SIPAdminLog::ProtocolRecord::Flush:2420.idx(196))[2737352855] $$begin_record
Trace-Correlation-Id: 2737352855
Instance-Id: 1304
Direction: incoming
Peer: srv-domain34.domain.nl:49510
Message-Type: request
BYE sip:[email protected];opaque=user:epid:L30jBQ2CP1G71x2KsIF2cAAA;gruu SIP/2.0
Start-Line: BYE sip:[email protected];opaque=user:epid:L30jBQ2CP1G71x2KsIF2cAAA;gruu SIP/2.0
From: "" <sip:[email protected]>;epid=36889192ba;tag=c84477430c
To: "lynctest"<sip:[email protected]>;tag=ffbc4dc4e5;epid=b58bd39e10
Call-ID: f295aa80628b4c7e8e0896ed216ec5b2
CSeq: 1 BYE
Via: SIP/2.0/TLS 172.xx.xx.1:49510;branch=z9hG4bK49BC5E54.654FC7DF7B8FBC80;branched=FALSE
Via: SIP/2.0/TLS 192.xx.xx.164:49524;received=84.xx.xx.204;ms-received-port=49524;ms-received-cid=E00
Route: <sip:SRV-domain34.domain.nl:5061;transport=tls;opaque=state:T:F;lr>;tag=BDBD058532075001772DF63E1A794C59
Max-Forwards: 69
Content-Length: 0
Ms-client-diagnostics: 52112;reason="Callee did not receive an ACK for the 200 OK"
$$end_record
TL_INFO(TF_DIAG) [0]226C.2528::04/09/2013-07:53:17.087.00130d06 (SIPStack,SIPAdminLog::WriteDiagnosticEvent:1207.idx(778))[2737352855] $$begin_record
Severity: information
Text: Routed a request that came from a server trusted for routing
SIP-Start-Line: BYE sip:10.xx.xx.30:52211;transport=tls;ms-opaque=07531f0291;ms-received-cid=11400;grid SIP/2.0
SIP-Call-ID: f295aa80628b4c7e8e0896ed216ec5b2
SIP-CSeq: 1 BYE
Peer: 10.xx.xx.30:52211
Data: destination="[email protected]"
$$end_record
TL_INFO(TF_PROTOCOL) [0]226C.2528::04/09/2013-07:53:17.087.00130d62 (SIPStack,SIPAdminLog::ProtocolRecord::Flush:2420.idx(196))[2737352855] $$begin_record
Trace-Correlation-Id: 2737352855
Instance-Id: 1304
Direction: outgoing
Peer: 10.xx.xx.30:52211
Message-Type: request
BYE sip:10.xx.xx.30:52211;transport=tls;ms-opaque=07531f0291;ms-received-cid=11400;grid SIP/2.0
Start-Line: BYE sip:10.xx.xx.30:52211;transport=tls;ms-opaque=07531f0291;ms-received-cid=11400;grid SIP/2.0
From: "" <sip:[email protected]>;epid=36889192ba;tag=c84477430c
To: "lynctest"<sip:[email protected]>;tag=ffbc4dc4e5;epid=b58bd39e10
Call-ID: f295aa80628b4c7e8e0896ed216ec5b2
CSeq: 1 BYE
Via: SIP/2.0/TLS 10.xx.xx.37:5061;branch=z9hG4bK445B1BFE.41682B6C1B09AC7D;branched=FALSE;ms-internal-info="bajkITWtf7W6iXpPN4ntXDe2Uuk9SpjNhAw17jrz6DmT9sK2hB10T2EQAA"
Via: SIP/2.0/TLS 172.xx.xx.1:49510;branch=z9hG4bK49BC5E54.654FC7DF7B8FBC80;branched=FALSE;ms-received-port=49510;ms-received-cid=13800
Via: SIP/2.0/TLS 192.xx.xx.164:49524;received=84.xx.xx.204;ms-received-port=49524;ms-received-cid=E00
Max-Forwards: 68
Content-Length: 0
Ms-client-diagnostics: 52112;reason="Callee did not receive an ACK for the 200 OK"
$$end_record
TL_INFO(TF_PROTOCOL) [0]226C.2528::04/09/2013-07:53:17.087.00130f28 (SIPStack,SIPAdminLog::ProtocolRecord::Flush:2420.idx(196))[2737352855] $$begin_record
Trace-Correlation-Id: 2737352855
Instance-Id: 1306
Direction: incoming
Peer: 10.xx.xx.30:52211
Message-Type: response
SIP/2.0 481 Call Leg/Transaction Does Not Exist
Start-Line: SIP/2.0 481 Call Leg/Transaction Does Not Exist
From: "" <sip:[email protected]>;epid=36889192ba;tag=c84477430c
To: "lynctest"<sip:[email protected]>;tag=ffbc4dc4e5;epid=b58bd39e10
Call-ID: f295aa80628b4c7e8e0896ed216ec5b2
CSeq: 1 BYE
Via: SIP/2.0/TLS 10.xx.xx.37:5061;branch=z9hG4bK445B1BFE.41682B6C1B09AC7D;branched=FALSE;ms-internal-info="bajkITWtf7W6iXpPN4ntXDe2Uuk9SpjNhAw17jrz6DmT9sK2hB10T2EQAA"
Via: SIP/2.0/TLS 172.xx.xx.1:49510;branch=z9hG4bK49BC5E54.654FC7DF7B8FBC80;branched=FALSE;ms-received-port=49510;ms-received-cid=13800
Via: SIP/2.0/TLS 192.xx.xx.164:49524;received=84.xx.xx.204;ms-received-port=49524;ms-received-cid=E00
Content-Length: 0
Ms-client-diagnostics: 52085;reason="Dialog does not exist"
$$end_record
TL_INFO(TF_DIAG) [0]226C.2528::04/09/2013-07:53:17.087.0013142e (SIPStack,SIPAdminLog::WriteDiagnosticEvent:1207.idx(778))[2737352855] $$begin_record
Severity: information
Text: Response successfully routed
SIP-Start-Line: SIP/2.0 481 Call Leg/Transaction Does Not Exist
SIP-Call-ID: f295aa80628b4c7e8e0896ed216ec5b2
SIP-CSeq: 1 BYE
Peer: srv-domain34.domain.nl:49510
$$end_record
TL_INFO(TF_PROTOCOL) [0]226C.2528::04/09/2013-07:53:17.087.00131486 (SIPStack,SIPAdminLog::ProtocolRecord::Flush:2420.idx(196))[2737352855] $$begin_record
Trace-Correlation-Id: 2737352855
Instance-Id: 1306
Direction: outgoing
Peer: srv-domain34.domain.nl:49510
Message-Type: response
SIP/2.0 481 Call Leg/Transaction Does Not Exist
Start-Line: SIP/2.0 481 Call Leg/Transaction Does Not Exist
From: "" <sip:[email protected]>;epid=36889192ba;tag=c84477430c
To: "lynctest"<sip:[email protected]>;tag=ffbc4dc4e5;epid=b58bd39e10
Call-ID: f295aa80628b4c7e8e0896ed216ec5b2
CSeq: 1 BYE
Via: SIP/2.0/TLS 172.xx.xx.1:49510;branch=z9hG4bK49BC5E54.654FC7DF7B8FBC80;branched=FALSE;ms-received-port=49510;ms-received-cid=13800
Via: SIP/2.0/TLS 192.xx.xx.164:49524;received=84.xx.xx.204;ms-received-port=49524;ms-received-cid=E00
Content-Length: 0
Ms-client-diagnostics: 52085;reason="Dialog does not exist"
$$end_record
============
Thanks
Regards
Pascal

External and internal mikes are not automatically switching over either recording or on voice calls

My laptop model name is HP Pavilion dv4-1100ea which is shipped with Vista Home premium 32 bits and has got service pack 1.
Restored the laptop to factory setting since then I am having the following problems; I had the same problem when my laptop was brand new and whenever I reset the laptop to factory setting I get the following problems:
1. External and internal mikes are not automatically switching over either in middle of the recording using sound recorder or while the call in progress on voice calls (skype):
   Using the sound recorder if I start recording the sound with external mike and in-between recording if I switchover from external mike to inbuilt mike and later on when I play back I can only hear the sound up till where I used the external mike during recording, after the switchover to inbuilt mike I cant hear any sound.
   But if I start the recording with inbuilt mike and in between recording if I plug in the external mike and later on when I play back I can only hear the sound up till where I used the inbuilt mike during recording , after the switchover to external mike I cant hear any sound.
   So in brief both my external and internal mikes are working fine, only problem is that if I start recording (using sound recorder) or voice call with one specific mike, I have to continue with it till the end. I can’t switchover to another mike in between the conversation (voice call) or recording, if I do so, I have to select the mike manually in chat software but while recording I cant even select manually because in laptop, it takes the mike whichever is in current use as default mike in recording tab(sound window). The green tick automatically (in recording device tab) switches over according to the use of mike. Though the green tick in the recording tab is switching over automatically according to use of mikes, its not picking up the sound after switch over during recording.
2. And also when I click on recording device tab in sound window and plug in external mike, though the green tick automatically switchovers from internal to external mike, while I speak both internal and external mikes volume meter respond to the sound inputs by rising and falling but if I take out external mike, green tick goes to internal mike and when I speak only internal mike volume meter respond to sound rising up and down not the external mike.
To resolve the issue I have tried following steps with no luck:
1.I have checked the mikes(internal and external) properties, the both mike shows to be enabled in general tab, in level tab the volume is set to 100 and in advanced tab , all options are selected.
2. In device manager I have got only one audio driver named as “IDT High definition Audio CODEC”. I have uninstalled the audio driver and reinstalled it using scan for hardware option
3. Uninstalled the audio driver in device manager and reinstalled the audio driver using recovery manager > advanced option> hardware driver re-installation.
3. I have updated the BIOS(Insyde F.65, 12/02/2010).
4. I tried to update the audio driver using below link but things went more worse so I did system restore (not factory setting though).
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-67051-1&lc=en&dlc=en&cc=us&...

Sounds like you need to upgrade to the iPhone 5s
The 5s has Touch ID
You can unlock your phone with your finger instead of typing in a key code
No swiping to unlock either, just touch the home button
You can enrol multiple fingers as well
Here is a video of it in action
http://www.apple.com/iphone-5s/videos/#video-touch
Or wait and see what iPhone 6 has to offer
That being said, as desiel vdub posted if the phone is up to your face, the proximity sensor should turn the screen off
And when you lower the phone turn it back on again
Not sure about the phone locking when your on a call doesn't sound right

ODI XML data server error while creating External databse tables.

Hi,
i am trying to create External database tables using XML data server.
i am getting the following error,i have done this same thing for small xml files before.
Java.sql.SQLException: ORA-00904: : invalid identifier
     at com.sunopsis.jdbc.driver.xml.bz.execute(bz.java)
     at com.sunopsis.jdbc.driver.xml.ca.execute(ca.java)
     at com.sunopsis.xmlfifth.b.u.a(u.java)
     at com.sunopsis.xmlfifth.b.bj.a(bj.java)
     at com.sunopsis.xmlfifth.b.bj.a(bj.java)
     at com.sunopsis.jdbc.driver.xml.u.a(u.java)
     at com.sunopsis.jdbc.driver.xml.u.g(u.java)
Thanks,
RK

RK,
With no details of how you configured the XML server, what were the parameters used in the configuration for using external database, etc, I dont know how much can someone help you.
This is an Oracle error, so a few things that could be problematic with your "big" xml -
1.) An element name could be of length > 30 characters (Oracle table name length limit is 30)
2.) There are some special characters in the element name
3.) Element name begins with a Number
4.) Element name is an Oracle reserved word.
This list can go on.

Create External document (URL) in SAP Personas

Hi Smart People!
To save some steps and incorporate a scanner I am working on creating buttons to "Attach Documents" in different areas such as MM03, FB03, and a few others where we have to keep a scanned in document attached to certain other Materials or Payables and such. All docs are scanned in and saved online and then we use the "create external document (url) menu option to link it where it is needed in SAP.
In one place it works just fine and in the others it is not working at all and custom button or even just following the already existing menu options it keeps giving me this error. I tried search on the SCN and Google and no such luck on this error. Anyone have any ideas? See pic below and also the text below is the separated error so you can see what it actually says.
[Unknown] ses[0]/wnd[0]/usrUSRAREA/ctlcntITS/itsdoc
Thank you for any help you can give!

That screen shot is for the Silverlight browser plugin.
You can check your Personas version and patch level in System -> Status. Clicking on the magnifying glass in the SAP System Data box will list all the components of the ERP system. It will tell you what Personas version and SP is installed.
Something like this:
The above means Personas 2.0 SP2.
If you indeed happen to have Personas 2.0 with no support package (so SP level says 0000), then the first thing I'd recommend is to bring the system to the latest level, which would be like in the screen shot, and then trying again. There is a good chance the problem will be resolved.
If your system is completely up-to-date and it still gives you trouble, then create an OSS incident.

Figures (Screenshots with Callouts) - Create Externally or Internally?

Similar Messages

Maybe you are looking for