File Adapter - Large file

Hi there,
  I am using a 6.5 MB file and the file adapter is not picking up the file. The status is still green in the adapter monitoring and says process started.
Any insights into this issue.
[email protected]

HI,
It should pick 6.5 MB etc.. Check the read/write etc permission of the file/folder
Are you getting any error ? Anyway , just check the Read-Only option in the file adapter configuration.
Also look into log from Visual admin for the File adapter
Regards,
moorthy

Similar Messages

  • Error in Receiver File adapter using File content Conversion

    Hi,
    I am getting the following error in the receiver file adapter.
    Conversion initialization failed: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found: Parameter 'statement.fieldFixedLengths' or 'statement.fieldSeparator' is missing
    I am using the below parameters for FCC:
    Recordset Structure - statement
    statement.endSeparator - 'nl'
    statement.fieldSeparator - '0X09'
    statement.fieldNames -xblnr,wrbtr,newbs,kostl,newko,prctr,xref1,rke_wwfud,rke_wwst3,blart,bukrs,bldate,budat,gjahr,monat,ctype,waers,bktxt,posnr,wbs_element,mwxkz,businessplace,businessplace,c_waers,c_wrbtr,g_ctype,g_waers,g_wrbtr,h_ctype,h_waers,h_wrbtr,trade_id,lob,sgtxt,zuonr,reason_rev,ldgrp,tcode,lifnr
    ignoreRecordsetName - true
    Please let me know where i am going wrong.
    Thanks,
    Aparna

    Hi Aparna,
    I feel the problem in your content conversion parameters is with
    statement.fieldNames and ignoreRecordsetName
    When you are confirguring receiver file adapter for file content conversion the above one is not required. Please refer below link for details on configuring content conversion in file adapter
    [http://help.sap.com/saphelp_nw04/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/frameset.htm]
    Hope this helps !!
    Regards,
    Amit

  • File Adapter or File  Transport which one will give more performance

    Hi all,
    File Adapter or File Transport which one will give more performance ? in OSB?
    Which one to select any one did performance analysis?
    Thanks
    Phani

    Why don't you just go read some benchmarks?
    http://www.barefeats.com/mbpp18.html

  • Sender File Adapter with file conversion

    Hi guys,
    I’m using a Sender File adapter with file conversion. The message to be processed has a structure with fixed lengths and in your content are some values that needs to be ignored.
    An example:
    value1  <b>value2</b>  value3…
    I want to ignore <b>value 2</b> but I can’t find a parameter for that! Do I need to define dummy fields on my data type and ignore those fields during mapping? Or there is a specific parameter for that?
    Thanks in advance,
    Ricardo.

    hi,
    there always is another way:)
    you can import the whole line to one field
    and cut it inside the adapter module
    (then you can define start and stop of the substring that you need to use)
    but of course it's not standard even though it's quite easy to achieve in java
    Regards,
    michal
    <a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

  • Hi i just bought tyhe product Export PDFs to Word and Excel . but ni only sussace conver the small file ,the large file such as n3000kb ,it can't work, please tell what can i do now thanks

    Hi i just bought tyhe product Export PDFs to Word and Excel . but ni only sussace conver the small file ,the large file such as n3000kb ,it can't work, please tell what can i do now thanks

    Hi i just bought tyhe product Export PDFs to Word and Excel . but ni only sussace conver the small file ,the large file such as n3000kb ,it can't work, please tell what can i do now thanks@

  • Reciever File Adapter - Temp File Name Scheme using Variable Substitution

    How can I create a temporary file that uses variable substitution? 
    We are having a problem with files merging when we write files using the "Use Temporary File" setting on the FIle Adapter.  So two independent files are merging into a single file.  We are not using the "Append" setting.
    We would like to use a Temp File Name Scheme that would append the message id onto the temporary file name. 
    Using variable substitution we created a msgid variable.  When added to the temporary file name using %msgid% the temporary file name is created with %msgid% in the name instead of the actual message id.  We put the variable into the "File Name Scheme" as well and the end completed file used the message id in the name.
    Any Ideas?
    Thanks,
    Matt

    HI Matthew,
    Why are you adding the message id into the temporary file??
    I understand that you want the output of the filename to contain message id .. and hence you are using variable substitution for the same.
    Temporary file name will anyways get overwritten by the actual file name (here the actual filename will be using variable substituion).
    So i suggest to achieve your scenario you can add any name in the temporary file and maintain the desired filename you require as output in the variable subsititution.
    Temporary File Name option actually acts as a lock - unlock mechanism from PI side while the file is getting written to the file server so that while PI is writting the file no third party application batch program picks it up.
    I hope this helps.
    Cheers
    Dhwani

  • File Adapter: Dynamic file name

    Hello,
    I would like to use a filename like this:
    Name.<DOCNUM>.Direction.<Timestamp>
    For DOCNUM I use variable substitution. Works fine.
    For <Timestamp> I need a different format as the timestamp function
    in file adapter create. So I try to set up my timestamp in mapping like
    dynamic file name:
    DynamicConfigurationKey key1 = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File", "Timestamp");
    conf.put(key1, a);
    Input a is date function which creates my desired timestamp format. In file adapter I try this:
    Name.%DOCNUM%.Direction.%Timestamp%
    or
    Name.%DOCNUM%.Direction.Timestamp
    or
    Timestamp
    all doesn't work for Timestamp.
    So is there a possibility to configure a dynamic filename like this???
    Is there a possibility to access dynamic configuration variables in dynamic filename except
    the known for filename and directory??
    thanks
    chris
    Edited by: Christian Riekenberg on Mar 10, 2009 4:02 PM
    Edited by: Christian Riekenberg on Mar 10, 2009 4:05 PM

    your file name needs to be
    Name.<DOCNUM>.Direction.<Timestamp>
    dont use variable substitution. use only dynamic configuration and set the file name
    introduce a logic that will create the string
    Name.<DOCNUM>.Direction.<Timestamp>
    eg. String filename = "Name" + var_docnum + "Direction" + var_timestamp;
    then use the dynamic conf code to set the file name and use adapter specific properties in you adapter to retrieve it.
    Ref:
    /people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
    http://help.sap.com/saphelp_nw04/helpdata/en/43/03612cdecc6e76e10000000a422035/frameset.htm

  • XI 3.0 File Adapter: Converting File Content in Sender Adapter

    Hi,
    This is probably a basic question but does anyone have an example of the parameters used when you are using the 'Converting File Content' option on the File Adapter ?
    Also, where do the record sets have to be defined ? Are these data types in the Integration Builder ?
    The documentation is to say the least a bit flaky.
    Any help would be appreciated.
    Kind regards
    Colin.

    Hello,
    I'm wondering if someone has experience setting up conversion for different record structures. The example shown (in a greate way) only picture one kind of structure.
    How should it be done if the file would contain
    10Mat1
    20100PCS
    The first record structure has columns
    ID(2),Material(10)
    The second redcord structure has columns
    ID(2),Quantity(3), Unit of messure (3)
    Brgds
    Kalle

  • XI Receiver file adapter : Dyanmic File PATH

    Hi,
    Appreciate if someone could help me on the issue below:
    I have a receiver File adapter with a dynamic target directory as per below:
    Target directory: /test/YYYY/MM/DD
    the value for YYYY (Year) , MM (Month) and DD (Date) will be the date when the file being transfered from the sender.
    Appreciate if someone could help me to achieve this. I know we can use the variable substitution however it doesn't allow us to set a systems field such as sy-datum.
    Cheers,
    ZAB

    Hi,
    Populate this value in your payload , and then use Dynamic File Name concept of File Adapter.
    The dynamic filename generation concept is as follows.
    In your filename field. just give a variable with % symbols. (eg: %file% ).
    Now, under the option Variable Name Substitution, you can give how the value has to be created.
    It can be your interface name, sender service name, etc or it can be some value dynamically from your payload.
    For the former, your give
    message:interface_name ,etc
    and for the payload part you give,
    Payload: "your element root which u wanna acecss"
    Just check this link out,
    http://help.sap.com/saphelp_nw04/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/content.htm
    And read the contents under variable substitution and it will help you understand the concepts better.
    If you have any clarifications, do get back,
    Regards,
    bhavesh

  • Receiver File Adapter - Create File on another SAP System

    I am working on a project that includes this requirement:  PDF files to be copied from a third party company via SFTP to a directory on our ECC system.
    We have worked out the sender side config, and the transfer of the files into PI works fine via SFTP.
    However, the PDF files are ending up in a directory on the PI system and not on our ECC system as expected.
    The receiver communication channel is set up as follows:
    Party = blank
    Communication Component = communication component of the ECC business system
    Adapter type = File
    ('Receiver' is ticked)
    Transport Protocol = File System (NFS)  (etc)
    Target directory = /tmp   (using this temporarily for testing)
    I would have thought using the ECC business system would mean the files would end up on that system, but instead they end up on the /tmp directory on the PI system.
    We are not permitted to use FTP between our SAP systems, so I can't go with that option.
    I've searched for help on this and only see conflicting and vague statements about whether the NFS protocol can or can't be used for transfer to another SAP system in the landscape. 
    Any suggestions and help on the above, and the best method of transferring the files to the end SAP system would be very appreciated.
    Regards,
    Christine

    remember that NFS means that it is referring to a file system on PI server.
    What you could do is mount a space on SAP PI onto SAP ECC so that ECC will be able to access the files on SAP PI.
    Guess that should solve the problem.

  • Receiver File Adapter with File content Conversion

    I have a requirement to send 2 different files to the target directory. Source is the same and different mapping for the 2 files.
    This I can achieve through multi-mapping but there is a problem. How can I use the File content for receiver File adapter which is using Multimapping.
    The structure of the 2 files also different.

    Why would you need FCC on receiver file adapter? If you need different files to be generated from the source, you could create two receiver channels with different mappings and just add them to the same Receiver Detemination. Isn't feasible?

  • File adapter:  Receiver File Content Conversion problem.. XML to CSV..!!

    Hi,
    I am facing some problem in FCC for Receiver adapter. It has to convert from XML to CSV File.
    <?xml version="1.0" encoding="UTF-8" ?>
    - <ns0:PaymentFull_Target xmlns:ns0="http://sdn.com/Payment">
    - <RECORDSET>
    - <Header>
      <LineItem>1</LineItem>
      <SaleNumber>102</SaleNumber>
      <TransNumber>105</TransNumber>
      <Store>1326</Store>
      <variant>Z6</variant>
      <TransType>NEW</TransType>
      <Adjustm_Type />
    </Header>
    - <Header>
      <LineItem>2</LineItem>
      <SaleNumber>102</SaleNumber>
      <TransNumber>105</TransNumber>
      <Store>1326</Store>
      <variant>Z6</variant>
      <TransType>NEW</TransType>
      <Adjustm_Type />
    </Header>
    - <Header>
      <LineItem>3</LineItem>
      <SaleNumber>102</SaleNumber>
      <TransNumber>105</TransNumber>
      <Store>1326</Store>
      <variant>Z6</variant>
      <TransType>NEW</TransType>
      <Adjustm_Type />
    </Header>
    </RECORDSET>
    </ns0:PaymentFull_Target>
    Output File is coming only with lineitem values , remaining fields are not coming.
    *1,2,3*
    FCC Used...
    RecordSet Structure -- Header
    Header.fieldNames -
    LineItem,SaleNumber,TransNumber,Store,variant,TransType,Adjustm_Type
    Header.fieldSeparator-----   ,
    Header.endSeparator-----    'nl'
    Did I miss anything.. any idea whats going wrong?
    Thanks
    Deepthi

    Hi Deepthi,
    Mention the occurrence of header in Recordset
    You specify like this:
    Recordset: Header, *
    Header.fieldSeparator : u2018Field Separatoru2019
    -->For FCC on Receiver side you donu2019t have to mention the field names.
    -->The u2018endSeparatoru2019 parameter needs to given for substructure only
    Check this links:
    http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
    /people/shabarish.vijayakumar/blog/2007/08/03/file-adapter-receiver--are-we-really-sure-about-the-concepts
    /people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
    Rgds,
    Akhila

  • Problem in File Adapter jca.file.FileName

    Hello, I have problem in sending variable data to the file adapter property
    I have defined Variable FlowData of Type Element from a XSD
    When I am trying to assign the variable data to the File adapter it is throwing error
    *<bpelx:inputProperty name="jca.file.FileName"*
    variable="flowData"
    query="ns2:flowData/ns2:fileInfo/ns2:name"/>
    Error query "ns2:flowData/ns2:fileInfo/ns2:name" is invalid, because step 'ns2:flowData' is not valid.
    Please help me!!

    Hi,
    Try to add a slash */* at the beginning of the xpath...
    */ns2:flowData/ns2:fileInfo/ns2:name*
    Cheers,
    Vlad
    Give points - it is good etiquette to reward an answerer points (5 - helpful; 10 - correct) for their post if they answer your question
    https://forums.oracle.com/forums/ann.jspa?annID=330

  • Sender File Adapter: Flat file content conversion to "multileveled" XML

    Hi all,
    I would like to do following conversion with file adapter:
    - Input flat file schema:
    A...
    B,,,
    C:::
    - Desired XML form:
    <mesage>
      <A>
        <B>
          <C>:::</C>
        </B>
      </A>
    </message
    >
    All found examples (internet or XI documentation) do offer only "flat" XML option:
    <mesage>
      <A>...</A>
      <B>,,,</B>
      <C>:::</C>
    </message>
    Does anybody have an idea ?
    Thanx and regards
    Jurica

    File Adapters content conversion does not supprot such a nested strucutre currently.
    The only format supported is the one shown in ths link,
    http://help.sap.com/saphelp_nw04/helpdata/en/2c/181077dd7d6b4ea6a8029b20bf7e55/content.htm
    Either write a module that will do this conversion or Change the datatye for the source to the format shown in help.sap.
    Regards
    Bhavesh

  • Sender File Adapter with file conversion  Multimapping

    Hello all,
    i have to use multimapping with the file sender adapter
    XML for multimapping ist like this
    ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
       <ns0:Message1>
          <ns1:KVNR_Senden_MT xmlns:ns1="urn:lsv.de/SENDER">
             <Inhalt>
                <KE/>
                <VF/>
                <BBNRAB/>
                <BBNREP/>
                <VERNR/>
                <ED/>
                <FEKZ/>
    in File adapter
    DocumentName Messages
    RecordsetName  Inhalt
    Recorset Struc Inhalt,20
    Inhalt.fieldFixedLength 4,5,6.....
    Inhalt.fieldNames        KE,VF,.....
    but were can I generate Message1?????
    any Hints?
    regards
    ralf

    sorry but the message tags will not be add dynamically
    i have change an existing message mapping 1:1 with file content conversion
    into a multimapping.
    by changing into multimapping the message was surrounded with
    <ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
       <ns0:Message1>.......
    no changing in File Adapter an in the IE there was an error
    com.sap.aii.utilxi.misc.api.BaseRuntimeException geworfen: RuntimeException in Message-Mapping transformatio~.
    if i added the stuct
    <ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
       <ns0:Message1>.......
    by hand and it works???
    so i think i had to add
    <ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
       <ns0:Message1>.......
    to the file content conversion but i don't know how to do it???
    Ralf

Maybe you are looking for

  • SAP ST22 dump SAPSQL_ARRAY_INSERT_DUPREC

    Hi All, We are getting dump SAPSQL_ARRAY_INSERT_DUPREC in testing system. SAP basis: 701 and Oracle 10.2.0.2 We are getting this dump from yesterday only and the details of the dump are as mentioned below: ============================================

  • When working on my ipad with pages and numbers, I have experienced it freezing up and i cannot access the files?

    When I am using Pages or Numbers app on my ipad it has frozen up?  I cannot edit, open any of the files.  Then later I can which is what I am hoping with the document I just produced?  Is it because it goes to the cloud? 

  • Which monitor cable: VGA or DVI?

    I have a 21" Samsung SyncMaster 220wm LCD monitor. I have cables & adapters for both connections, but is there an advantage to either VGA or DVI?

  • Problem with importing my package in JSP

    This is the code for creating a package dbconnection: package dbconnection; import java.sql.*; public class DBConnection      java.sql.Connection con=null;      public void DBConnection(){ }      public java.sql.Connection getDBConnection() try{     

  • Function Module to read Info cube data

    Hi Guys,           Is there any function module which is used to read the data in the info cube and collect the data to an internal table? Thanks Kumar