File Adapter picks up the file but cant see it in MONI/Message Monitoring

Hi
I am using FCC in Sender File Adapter and have only one sub structure under Recordset hence I have not used the 'Key Field Name' though ''Key Field Type' by default is 'String(Case-Sensitive)'. Besides the 'fieldNames' heading I have mentioned all the fields of the sub structure in the same order as I have mentioned in the Data Type.
The problem that I am facing is that even though the file is picked up from ftp successfully still I cant see any traces of it in either MONI or Message Monitoring though
The error that I receive in the MDT is -
Success : Entire file content converted to XML format
Warning : Empty document found. Proceed without sending message
Success : File "Test.csv" deleted after processing
and I have data in the file.
Can u suggest a solution?
Warm regards,
Vaibhav

> Hey
> >>So I have filled my test excel file with the values
> A and B in adjacent columns
> are you picking up some .xls file?if yes,then Content
> conversion wont work,You have to create adapter
> module processor and you have to add to your module
> processor bean to the adapter...Just check the
> following procedure...
> https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/
> 1967
> Thanx
> Aamir suhail
Hi Aamir
I had a look at the blog and according to that I will need to create a module...the prob with that is in the blog he hasnt provided the full steps for that. Also I had tried this thing earlier of using an excel file and saving it in .csv format and it had worked. I cant figure out what the error is this time
Have u worked on creating amodule for excel files b4?
Vaibhav

Similar Messages

I backup to an external hdd with Time Machine, when it ran out of space it did not delete old backups, now my internal hdd says its full when before it had heaps of space. I have searched for extra files but cant find any. Can anyone help, please.

I backup to an external hdd with Time Machine, when it ran out of space it did not delete old backups, now my internal hdd says its full when before it had heaps of space. I have searched for extra files but cant find any. Can anyone help, please.

First, empty the Trash if you haven't already done so. Then reboot. That will temporarily free up some space.
To locate large files, you can use Spotlight as described here. That method may not find large folders that contain a lot of small files.
You can also use a tool such as OmniDiskSweeper (ODS) to explore your volume and find out what's taking up the space. You can delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one.
Proceed further only if the problem hasn't been solved.
ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
Install ODS in the Applications folder as usual.
Triple-click the line of text below to select it, then copy the selected text to the Clipboard (command-C):sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
I don't recommend that you make a habit of doing this. Don't delete anything while running ODS as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means.
When you're done with ODS, quit it and also quit Terminal.

Hi, I have a late 2011 MacBook Pro but cant get the mirroring function to work with Apple TV. I've got the most recent Software 10.7.5 but cant see the mirroring icon or turn this on. I'm able to mirror from my Ipad but not my Mac, any thoughts?

Hi, I have a late 2011 MacBook Pro but cant get the mirroring function to work with Apple TV. I've got the most recent Software 10.7.5 but cant see the mirroring icon or turn this on. I'm able to mirror from my Ipad but not my Mac, any thoughts?

Welcome to the Apple Support Communities
AirPlay Mirroring is supported on your Mac, but it needs OS X Mountain Lion (10.8). See > http://support.apple.com/kb/HT5404
You have two possibilities:
1. Make a backup, open App Store and purchase Mountain Lion to upgrade to this OS X. Then, you will find the AirPlay Mirroring icon at the top right of the display, on the menu bar, or on System Preferences > Displays.
2. Keep OS X Lion and use AirParrot > http://www.airparrot.com
Both options work properly, but I recommend AirPlay Mirroring as it doesn't need a third-party program

I am using Iphone with windows. I have draged photos from my computer into Iphone in the past, but cant seem to do it now. How do I move photos from my pc to my iphone without deleting photos that are on the phone.

I am using Iphone with windows. I have draged photos from my computer into Iphone in the past, but cant seem to do it now. How do I move photos from my pc to my iphone without deleting photos that are on the phone.

You cannot drag pics from computer to iphone. This has never been a feature of iphone.
You sync them as you would anything esle.
You select photos from the photos tab. Whatever is selected will be on your iphone. Anything not selected will not be. Make sure that everything you want on your iphone is selected, then sync.

My WiFi pick up the signal, but I can't do anything with internet.

I was browser the web the other day, and all the sudden everything stop loading, and after that I can't go to any site. any more. but as I check of the log, I doesn't see any problem. and I can tell the system do pick up the signal, but I just can't go online.
here is what I have check:
ioky@Varius:~$ sudo iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
eth1 IEEE 802.11b ESSID:"linksys" Nickname:"ipw2100"
Mode:Managed Frequency:2.437 GHz Access Point: 00:0C:41:84:3B:BE
Bit Rate=2 Mb/s Tx-Power:16 dBm
Retry short limit:7 RTS thr: off Fragment thr: off
Encryption key: off
Power Management: off
Link Quality=72/100 Signal level=-80 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:3 Missed beacon:0
eth1 Scan completed :
Cell 01 - Address: 00:12:0E:0F:50:02
ESSID:"05B408577194"
Protocol:IEEE 802.11bg
Mode:Master
Frequency:2.437 GHz (Channel 6)
Encryption key: off
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s
11 Mb/s; 12 Mb/s; 18 Mb/s; 22 Mb/s; 24 Mb/s
36 Mb/s; 48 Mb/s; 54 Mb/s
Quality:53 Signal level:0 Noise level:0
Extra: Last beacon: 216ms ago
Cell 02 - Address: 00:13:10:1B:71:54
ESSID:"Chidori"
Protocol:IEEE 802.11bg
Mode:Master
Frequency:2.437 GHz (Channel 6)
Encryption key: on
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s
11 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s
48 Mb/s; 54 Mb/s
Quality:37 Signal level:0 Noise level:0
IE: WPA Version 1
Group Cipher : TKIP
Pairwise Ciphers (1) : TKIP
Authentication Suites (1) : PSK
Extra: Last beacon: 212ms ago
Cell 03 - Address: 00:13:10:73:95:5A
ESSID:"ptak"
Protocol:IEEE 802.11bg
Mode:Master
Frequency:2.462 GHz (Channel 11)
Encryption key: on
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s
11 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s
48 Mb/s; 54 Mb/s
Quality:31 Signal level:0 Noise level:0
Extra: Last beacon: 0ms ago
Cell 04 - Address: 00:0C:41:84:3B:BE
ESSID:"linksys"
Protocol:IEEE 802.11b
Mode:Master
Frequency:2.437 GHz (Channel 6)
Encryption key: off
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s
Quality:31 Signal level:0 Noise level:0
Extra: Last beacon: 208ms ago
ioky@Varius:~$ sudo dhclient eth1
Internet Systems Consortium DHCP Client V3.0.6
Copyright 2004-2007 Internet Systems Consortium.
All rights reserved.
For info, please visit http://www.isc.org/sw/dhcp/
Listening on LPF/eth1/00:0c:f1:3a:b5:02
Sending on LPF/eth1/00:0c:f1:3a:b5:02
Sending on Socket/fallback
DHCPREQUEST of 192.168.1.104 on eth1 to 255.255.255.255 port 67
DHCPACK of 192.168.1.104 from 192.168.1.1
bound to 192.168.1.104 -- renewal in 33768 seconds.
ioky@Varius:~$ sudo ifconfig eth1
eth1 Link encap:Ethernet HWaddr 00:0c:f1:3a:b5:02
inet addr:192.168.1.104 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::20c:f1ff:fe3a:b502/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:145 errors:0 dropped:0 overruns:0 frame:0
TX packets:175 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:16023 (15.6 KB) TX bytes:12958 (12.6 KB)
Interrupt:11 Base address:0x2000 Memory:cfffe000-cfffefff
ioky@Varius:~ ping google.com
ping: unknown host google.com
I have no idea what is going. could anyone give me a hand?
Thanks

Can you ping one of google's IP addresses? for ex. 72.14.207.99 If you can you may want to check /etc/resolv.conf and see if your DNS IP is entered correctly.

I have have my photos in the Creative Cloud but cant see them with Ligthroom.

I have have my photos in the Creative Cloud but cant see them with Ligthroom.
These photos were sent to me by photgraphers who have edited the photos and added captions and technicala information that shoudl be seen in Lightroom.
I cant open the photos that are in Creative Cloud in Lightroom and therefore acant access the captions and the other specifics regarding copyright etc
Any help would be great
Thanks

The photos on CC will be synced to a folder on your hard drive.
You need to import into Lightroom from that folder.
If you have them on Behance, it’s possible to use the Publish Services tab.

I can open iTunes and play library contents but cant see any names or information in the library or any kind of wording at all

I can open iTunes and play library contents but cant see any names or information in the library or any kind of wording at all, please help.

Your synced music (and audiobooks) will go into the iPad's Music app, and films and tv shows into the Videos app - on an iPad the iTunes app is just the store

I lost my phone had everything backed up on icloud.got my new phone,went to retrieve my photos but it duplicated a certain amount therefore used the free 5 gb of data. purchased 16gb then but cant see my old photos or old iphone on icloud account

I lost my phone had everything backed up on icloud.
got my new phone,went to retrieve my photos but it duplicated a certain amount therefore used the free 5 gb of data. purchased 16gb then but cant see my old photos or old iphone details on icloud account. it only shows the certain amount that duplicated but no old phone details or old photos.
gutted all travelling photos

If you have a backup of your old phone, the backup should include your camera roll photos. Restoring the backup should recover them. This explains how to restore an iCloud backup: iCloud: Restore your iOS device from iCloud.

I have an imac that has the panther upgrade disk. I need to reinstall the os, but cants because os 10.2 was preloaded on the computer. All I have is the upgrade disk, which wont do!! What do I do?!!

I have an imac that has the panther upgrade disk. I need to reinstall the os, but cant because os 10.2 was preloaded on the computer. All I have is the upgrade disk, which wont do!! What do I do?!!

Why do you need to re-install? Try to fix the problem.
I would assume a 10.2 full install would be fairly cheap on ebay.
Robert

I have been buying adds on Google's adwords campaign but cant see my own adds.

''duplicate of https://support.mozilla.org/en-US/questions/960100 - locking''
When in my firefox browser doing a google search, I cant see the adds to the right and on the top of a search page. I have been buying adds on Google's adwords campaign but cant see my own adds. is there a setting I need to correct to be able to view these adds?

Firefox doesn't natively block ads. However, there are some extensions that could affect ads. Can you check here for anything that might possibly be blocking or filtering ads or scripts (e.g., Adblock Plus, NoScript), or that modifies pages in any way (e.g., Greasemonkey, Stylish):
orange Firefox button (or Tools menu) > Add-ons > Extensions category
If you have ever created a custom style rule in a userContent.css file, you migh check that to. (If this doesn't sound familiar at all, then never mind.)

I have recently bought a Seagate Goflex satellite mobile wireless hard drive. I have converted some of my AVI movies to mp4 and transferred them to the hard drive, but when I play them through my iPad 2 I can hear the sound but not see the movie. Help???

I have recently bought a Seagate Goflex satellite mobile wireless hardrive , i have converted some of my AVI movies to MP4 and loaded them onto the hard drive, when I try and play them through my I pad2 I can hear the sound of the movie but not see the film, somebody please help, what am I doing wrong as I have spent a lot of time converting these movies to be able to travel with my iPad and watch them. Thank you

Unfortunately, the drive is pretty much restricted without hacking it. That is, you can't stream its content via standardized protocols like UPnP, SMB, FTP and the like. This makes you won't be able to access its content from any third-party apps otherwise capable of playing back AVI files from UPnP / SMB / FTP / WebDAV etc. sources.
While this is certainly not a recommendation (I can in no way be held responsible if anything goes wrong): you may want to consider extending the capabilities of the drive by installing the hack: http://www.hackseagatesatellite.com/wordpress/welcome/
It'll "open" the drive for third-party, AVI-capable multimedia apps like GoodPlayer, It's Playing etc. to directly play the files over the network.

USB port on wrt610n i can see the drive but cannot see the content

USB port on wrt610n i can see the drive but cannot see the content
I have followed the instructions I see the drive but when I try to acess the drive I get a empty new folder
help I am lostwhat should i do

winmaco wrote:
Yes i have it is working on my PC
One thing in setting up the usb I had to use a different password
my router has a password and the only way I could move forward was to use the default admin admin user name and password
I could not use my router user name and password.
The username and password for the share on your attached drive can be anything you want them to be. I assume you set up a share on the attached drive? That's where you need to add a password for the share, although for ease of use I never did assign a password to the shares.
You do know that the firmware for the Storage Link is buggy, right? File size limitations as well as file corruption issues? Connectivity issues also rise up, with the only workaround that I have found is a script that you have to run every time you boot up your computer. As far as I can see the Storage Link function is a poorly implemented idea. No firmware in sight to fix the issues, and no idea of when.

HT3209 i purchased a movie on apple tv but cant see it on my computer

i purchased a movie on apple tv but cant see it on my computer

You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option from the Quick Links section in the top right corner of the iTunes homepage in your iTunes application on your computer.

Download and install muse but cant see it anywhere ?

I have downloaded and installed muse twice now but cant see it anywhere , all other products have appeared just fine . Any help would be appreciated .

Which operating system are you using? Where have you looked to access the application?

My movies and music videos won't show up on screen, I can hear the sound but not see the video how do I fix this?

My movies and music videos won't show up on my computer screen, I can hear the sound but not see the video how do I fix this? I'm not sure what to do as far as turning my purchased movie into DVD goes either. I just want to put the movie onto a DVD disc but my itunes won't even show that I have a blank disc in the drive, I'm not sure what is wrong or how to fix this, any help at all would be much appreciated.

Hi @anthony7722 ,
Thank you for your query, I will do my best to help!
I grasp that you uninstalled the Intel graphic driver and the catalyst control. You reinstalled the Intel driver and now you can view and hear videos on the Internet but you are unable to set the resolution as high as previously.
When I checked the specifications for your notebook I see that you have switchable graphics.
Here are two links that I believe will help.
Overview of Switchable Graphics or Dual GPUs
Switchable Graphics on Notebooks Configured with Intel and ATI GPUs
Here is a link to HP Pavilion dv7-6150eb Entertainment Notebook PC Drivers
Please try this process.
1. Download the chipset driver, and both graphic drivers and save them but do not install them yet
2, Delete the chipset driver and install the updated one.
3. restart your notebook
4.Delete the Intel driver and install the updated one
5. restart your notebook
6. Delete the AMD driver and install the updated driver.
You should now have a Catalyst Control Center.
This should now allow you to use the higher graphic card which should support the higher resolution.
I hope this helped.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

File Adapter picks up the file but cant see it in MONI/Message Monitoring

Similar Messages

Maybe you are looking for