File Content Conversion at the receiver side
Hello All,
I have a field which has to be truncated at 50th character. What content conversion parameters do I need to add ...?!?!?
Thanks,
Smita
Hi Smita,
As understood by your question you want a target field to be of 50 character,
either you can apply substring function in your mapping to that target node.
It would be much more clear if you mention hows your source file structure is it fixed length or delimiter separated, if it fixedlength file you can apply this parameter in Content conversion <b>fixedLengthTooShortHandling</b> with value <b>Cut</b> nad mention your required length.
Rewards point if it is helpful,
Thanks
Anu Singhal
Similar Messages
-
File Content Conversion on the Receiving side
Is there a way in which if I want a Pipe Delimited File as a result, after the last field also I get a pipe with next record starting in the next line.
Hi,
For | (Pipe), use corresponding hex code as fieldSeparator i.e. 0x7C as fieldSeparator.
For FCC on receiver side refer -
[Simple FCC|http://www.riyaz.net/blog/index.php/2008/02/19/xipi-file-content-conversion-for-simple-structure/], [Complex FCC|http://www.riyaz.net/blog/index.php/2008/02/20/xipi-file-content-conversion-for-complex-structures/]
For separotor at the end of line you can try using a dummy field or use combination of pipe and newline i.e. '0x7C' and '0x0D' (stands for carriage return) or 'nl' as endSeparator
Edit: You might consider using 'nl' as beginSeparator parameter and 0x7C as endSeparator. This will do the trick. However, this would add a blank line in the beginning of the file.
Hope this helps.
Regards,
Riyaz
Edited by: Riyaz Sayyad on Aug 21, 2008 3:00 PM -
Problem with File Content Converion at the Receiver Side
Hello
I have an xml file which is in this format.
<?xml version="1.0" encoding="UTF-8"?>
<ns0:OUTPUT_ITALY_FORMAT_TYPE xmlns:ns0="urn:sli-payment-files:prototype">
<FEBRITRH>
<Filler/>
<RH/>
<ABI_Code/>
<SIA_Code>65318</SIA_Code>
<Creation_Date/>
<File_Identifier/>
<Filler1/>
<Application_Center/>
</FEBRITRH>
<FEBRIT61>
<Filler/>
<SixtyOne/>
<Accnt_Number>0000001</Accnt_Number>
<Filler1/>
<Blank/>
<Number/>
<Description/>
<Accnt_Code/>
<Bank_DIgit/>
<ABI_Code>06230</ABI_Code>
<Bank_Number>01653</Bank_Number>
<Bank_accnt>000043185249</Bank_accnt>
<Currency_code>EUR</Currency_code>
<Accnt_date>030204</Accnt_date>
<Constant/>
<Amnt/>
<Filler2/>
<FEBRIT62>
<Filler/>
<Constant/>
<Accnt_number>0000001</Accnt_number>
<Record_number>1</Record_number>
<Value_date>040204</Value_date>
<Posting_Date>030204</Posting_Date>
<Constant1>C</Constant1>
<Amnt>0000000000471.58</Amnt>
<Transaction_Code>Z2</Transaction_Code>
<Bank_Code>Z1</Bank_Code>
<Blank/>
<Reference_Number>2535394</Reference_Number>
<Reference>86</Reference>
<Additional_reference>VERS.***.IST./SU PIAZZA/CIRCOLARI/</Additional_reference>
</FEBRIT62>
<FEBRIT63>
<Filler/>
<Constant/>
<Accnt_Number/>
<Record_Number/>
<Text>POSTALI/TURIST</Text>
</FEBRIT63>
</FEBRIT61>
<FEBRIT64>
<Filler/>
<Constant/>
<Accnt_Number/>
<Currency_code/>
<Accntg_Date/>
<Constant1>C</Constant1>
<Amnt>0000000000471.58</Amnt>
<Constant2/>
<Cash_balance/>
<Filler1/>
<Balance/>
</FEBRIT64>
<FEBRITEF>
<FEBRITEF_1/>
<FEBRITEF_2/>
<FEBRITEF_3/>
<FEBRITEF_4/>
<FEBRITEF_5/>
<FEBRITEF_6/>
<FEBRITEF_7/>
<FEBRITEF_8/>
<FEBRITEF_9/>
<FEBRITEF_10/>
<FEBRITEF_11/>
<FEBRITEF_12/>
</FEBRITEF>
</ns0:OUTPUT_ITALY_FORMAT_TYPE>
Now i need to convert the above file into a text file when i get the o/p in xml format. I have tried using file content conversion but i am not able to get the solution right. Could anyone let me know as to how should i specify the recordset structure parameters if i need a comma between the fields in each of the structures.Also if u could let me know the other important parameters it could be of great help.
Thanks and Regards
SharatHi Sharat,
Your File format is like
Source Message Type
| - FEBRITRH
| - | - field1..
| - | - field2.. etc
| - FEBRIT61
| - | - field1..
| - | - field2.. etc
| - FEBRIT64
| - | - field1..
| - | - field2.. etc
| - FEBRITEF
| - | - field1..
| - | - field2.. etc
Create a Target Message Type like
Target Message Type
| - Recordset
| - | - FEBRITRH
| - | - | - field1..
| - | - | - field2.. etc
| - | - FEBRIT61
| - | - | - field1..
| - | - | - field2.. etc
| - | - FEBRIT64
| - | - | - field1..
| - | - | - field2.. etc
| - | - FEBRITEF
| - | - | - field1..
| - | - | - field2.. etc
Do all your mappings and
Define a Receiver File Adapter with Following Configuration
<b>Message Protocol</b> File Content Conversion
<b>Content Conversion Parameter</b>
<b>Recordset Structure</b> Recordset, FEBRITRH, FEBRIT61, FEBRIT64, FEBRITEF
Name value pair would be
Recordset.endSeparator nl
FEBRITRH.fieldNames field1,field2
FEBRITRH.fieldSeparator - , (or | )
FEBRIT61.fieldNames field1,field2
FEBRIT61.fieldSeparator - , (or | )
FEBRIT64.fieldNames field1,field2
FEBRIT64.fieldSeparator - , (or | )
FEBRITEF.fieldNames field1,field2
FEBRITEF.fieldSeparator - , (or | )
Hope this Helps,
Vijay -
File Content Conversion -All the input content was not shown in output file
Hi Experts,
In my scenario, I need to send data from .XML file to .txt file, using File Content Conversion at Receiver communication channel. This is File to File scenario.
This is my Input xml file.
<ns:FILEINPUT_MT xmlns:ns="http://File2FileTest">
<RECORD>
<Row>
<FirstName>Susie</FirstName>
<LastName>Tony</LastName>
<City>London</City>
<Country>UK</Country>
</Row>
</RECORD>
</ns:FILEINPUT_MT>
<b>Processing Parameters</b>
Target Directory = C:/Test
File Name Scheme = xi_output.txt
File Construction Mode = Add Time Stamp
File Type = Binary
<b>Content Conversion Parameters</b>
Recordset Structure : RECORD
RECORD.endSeparator = nl
RECORD.fieldSeparator = ;
After Activate and providing the input xml file, xi_output.txt file was generated. But the file content was shown only with Susie i.e. with First Name only. I need xi_output.txt file should have all the four fields (FirstName, LastName, City, Country)
Could some one help me to resolve the issue?
Thanks in advance
SreeCheck these blogs...Might help you.
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
/people/venkat.donela/blog/2005/06/08/how-to-send-a-flat-file-with-various-field-lengths-and-variable-substructures-to-xi-30
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
/people/jeyakumar.muthu2/blog/2005/11/29/file-content-conversion-for-unequal-number-of-columns
/people/shabarish.vijayakumar/blog/2006/02/27/content-conversion-the-key-field-problem
/people/sap.user72/blog/2005/01/06/how-to-process-csv-data-with-xi-file-adapter
/people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter
Link for SAP Help
http://help.sap.com/saphelp_nw2004s/helpdata/en/2c/181077dd7d6b4ea6a8029b20bf7e55/content.htm -
** File Content Conversion Error in Receiver CC - How to solve this?
Hi friends,
My target structure looks like below.
EmployeeJobDetails --> Message Type
JobCode --> Node
EmployeeNumber xsd:string
Domain xsd:string
JobTrack --> Node
Department xsd: string
Position xsd: string
I use the FCC parameters in the receiver CC as below:
Recordset Structure: JobCode,JobTrack
JobCode.fieldSeparator = |
JobCode.endSeparator = 'nl'
JobTrack.fieldSeparator = |
JobTrack.endSepartor = 'nl'.
Because, we want the output like below
1099|Raja
Accts|JuniorAccountant
1100|Ram
HR|Recruiter
like this.
In this scenario Source is XML and target is txt file.
I am using XSLT Mapping. The FCC works fine, if my source input file contains some records. But, when we send empty source XML file as below
<?xml version="1.0" encoding="UTF-8"?>
<EMPLOYEE_DATA/>
Mapping works fine. Message is processed successfully in SXMB_MONI. The payload in response also comes with Message Type name like below
<EmployeeJobDetails namespace >
</EmployeeJobDetails>
While convert this, the system throws below error.
Error Message:
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'Conversion configuration error: Unknown structure '' found in document', probably configuration error in file adapter (XML parser error)': java.lang.Exception: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'Conversion configuration error: Unknown structure '' found in document', probably configuration error in file adapter (XML parser error)'
Friend, how to convert this when source XML is empty.
But, if we remove JobTrack node in target strucutre and remove the JobTrack parameters in CC, then if we send the same empty XML file FCC is working fine and we get the target text file 0 KB. (Amazing !!)
But, in the first case, how to solve the issue?
Kind Regards,
Jegathees P.Hi friends,
If we remove JobTrack node in target strucutre and remove the JobTrack parameters in CC, then if we send the <b>same empty XML file</b> FCC is working fine and<b> we get the target text file 0 KB</b>. (Amazing !!)
But, if we give parameters like JobCode,JobTrack then send pass the same empty file, we face the problem 'File Content Conversion' Error.
Searching solution for this problem ... -
File content conversion using the Meaasge Transform bean
Hi
I have a scenario file with pipe delimited file.
What are content conversion parameters required
venkatSedamkar,
In file content conversion you give these parameters;
Header.fieldSeparator:|
Header.endSeparator:'nl'
DetailRecord.fieldSeparator:|
DetailRecord.endSeparator:'nl'
TrailerRecord.fieldSeparator:|
TrailerRecord.endSeparator:'nl'
In recordset structure you give as:Header,1,DetailRecord,*,TrailerRecord,1
Regards,
---Satish -
File Content Conversion on the Sender Adapter in PI 7.1
Hi Experts
I am working on a file to Proxy scenario where my file is fixed format length which will have only one Structures (Details Records) that would be coming from the text file but in the message type I have delcared Header, Detail , Trailer,
However I would be receiving the only Detail part (No header and Trailer) in some instances what value should I give for the header and trailer in the Content conversion part,
Thanks
PRSince you are going to get values only some instances for header and trailer node, you can create
Header structure & Trailer structure - make the occurence 0 to 1
Note: if your Header and Trailer values are empty for some instances then no worries. You declare FCC fields for header and trailer similar to Details.
Refer SAP FCC help link. -
Regarding content conversion parameters at receiver side
Hi
In the recevier side I have 3 nodes.
like HEADER,BODY,TRAILER.
file receiver communication channel I mentioned
RecordsetStructure* HEADER,BODY,TRAILER
parmeters I mentioned
HEADER.fieldFixedLengths
HEADER.endSeparator
BODY.fieldFixedLengths
BODY.endSeparator
TRAILER.fieldFixedLenghths
TRAILER.endSeparator.
In runtime workbench it is showing "Channel has not been correctly initialized and cannot process messages"
Please tell me is there any other parameters I have to mention.
regards
venkat.Venkat,
Pls refrer the below:
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
Regards,
Sameer! -
Error in File content conversion in the target
hi
I'm doing a content conversion at target.
my target structure while sending is like:
<MT>
<Header>
<a>
</Header>
<BODY>
<b>
</BODY>
<filename_output>
<filename>
</MT>
however in the target i have to ignore the last 2 fields: <filename_output> and <filename>.
I'm able to do it.
The problem is coming that in the target structure,when we open in Textpad, 2 trailing empty lines are there at the end.
we need to remove these lines.
Any idea how to do it?Hi Alok,
Try with parameters given in this blog:
/people/sravya.talanki2/blog/2005/08/11/solution-to-the-problem-encountered-using-variable-substitution-with-xi-sp12
If didnot work try: FileName.endSeperator = '0' as given in this thread: Re: Blank Lines While writing files
else give .endSeparator as two backspaces (if you have two new lines). The ascii code is '0xBS'. see this code:
http://www.december.com/html/spec/ascii.html
---Satish -
File Content conversion at the sender adapter without Key field
Hi All,
I have a requirement ....We are using Message Transform Bean at the sender adapter (we are not going for FCC as we are tranforming a decryption) ..its is a flat file...
we dnot have a key field for one of the node .....we have total 5 nodes under parent node and one of the node does not have key field ....
NOTE: I guess we have to do either Java mapping or XSLT ..but not getting proper weblogs with program...
and not well versed with coding...i got few codes which were either not fulfilling requiremment or they use stream tranformation where it is decaprecated in NWDS and does not allow to compile it properly .
Can somebody get me a code for Java which uses Abstract tranformation ...which can full fill below requirement
parent node
Node1
node 1a
node 1b
Node 2
Node 3
Input Flat file is in below format
example:
Employee Headre Flat files
Employee Detail Flat Files(this repeates numerous times as much as number of employees)
Employee Trailer Flat Files
Loan Headre Flat files
Load Detaisl Flat Files (this repeates numerous times as much as number of employees)
Loan Trailer Flat files
Assitance much appreciated thanks .
Regards
KiranHi Stefan,
I will rephrase the question i guess its communication gap...
1) we have an existing interface in 3.0..we are not copying the same interface to 7.1 as it was not according to standards and they are phasing out that system.
2) In 3.0 they are reading the Flat files under one record .. the structure is as follows:
Parent Node
Node
Row
They are reading all the flat files row by row.
and even in receiver they are reading in the similar fashion
3) In the current structure according to the FS we have to create a structure defined by them which is as below
Employee
Header
Details node 1
Details node 1a
Details node 1b
Trailer
Loan Header
Loan Detail
Loan Trailer
Receiver structure is
Employee
Node (this will have the receiver fields which is about 30 fields)
4) We have pulled a sample file from 3.0 for the existing interface as we din get the sample file for existing one in FS and Iam not sure whn are they gonna send it.
5) In the existing interface payload we have everything matching even the field lengths and postions and even key fields and key fields we got from the FS
6) problem is we donot have key fields for the Details node 1a and 1b even in FS or the existing payload and we got an update from the FS consultant that we will be receiving these fields but without keyfields...
see i donot have any problem taking out the details 1a and 1b out of the details header and create the structure ,,,,but the main issue is without key field we will not be able to generate the 1a and 1b nodes or read it in the FCC or MTB (i have to use MTB as we are decryting the file from the sender).
Or is there any other method apart from java mapping or module development to handle these files -
File Content Conversion-Error in receiver channel
hi gurus,
In moni its displaying success message but in adater monitoring, Reciver channel error displayed as
Parameter 'Record.fieldFixedLengths' or 'Record.fieldSeparator' is missing
can any one help me with this.
regards,
kiran.Hi,
NameA.fieldSeparator
If you specify a character string here, it is added as a separator to all columns except the last. You can also specify this string in addition to NameA.fieldFixedLengths.
If you made no specification for NameA.fieldFixedLengths, this is the only specification to identify the individual columns in a row.
If you made a specification for NameA.fieldFixedLengths, the length of the separator is not taken into account.
You must specify at least either NameA.fieldFixedLengths or NameA.fieldSeparator.
If you have only specified NameA.fieldSeparator, the structures of the XML document can have differing numbers of elements that are added to each other separately in the text file by the value from NameA.fieldSeparator. If you specify NameA.fieldFixedLengths this is not possible since the number of columns is defined when the column widths are given.
NameA.endSeparator
If you enter a character string here, the system adds it to the last column as a closing character. You can also make this specification in addition to NameA.fieldFixedLengths. To include a line break following the closing character, you must explicitly define it by attaching ´nl´ (including the quotation marks) to the string.
The default value is a line break (no explicit separator after the last column; instead the structures are arranged line-by-line). -
Receiver File content conversion - NO Output
Hi, yesterday i posted already to this topic but i chose to make a new thread.
I have an IDoc2File Scenario where i put the generated File to the filesystem of the XI-Server.
I try to do a file content conversion at the receiver side. I already read several blogs and also the official documentation (which is kind of bad - because the arne't posted all supported parameters which could be used on the recordset)
But anyway, the is a txt file written but without any details inside, no data is deliverd.
I do a message mapping and try to put only some data to the end-file.
here is my MT which i try to convert:
MT_Tafel
++TafelRecordset
+++TafelDetailsStructure
++++TAFIST
++++TAFSOLL
My parameters at the receiver communication channel are:
Recordset: TafelDetailsStructure
TafelDetailsStructure.endSeparator = 'nl'
TafelDetailsStructure.addHeader = 0
TafelDetailsStructure.fieldSeparator = ,
I have the right message protocol, i am trying to write a simple text file, i have no file-coding like ASCII, file is directly written into an empty one - and that's all.
The file is written but without data inside.
Do i have to announce the filednames i want to write? Like TafelDetailsStructure.fieldNames??
Do i have to add Parameters concerning the tags on the higher level, like TafelRecordset?
Is there a general overview about all parameters you can use on this file content conversion?
Can anybody help me with my scenario - i have no clue what i have done wrong. Communcation channel says everthing is fine, message succesfully transfered.
best regards, Jenshi,
you need to mention the names of the field by
TafelDetailsStructure.fieldNames where u need to specify the filed names.
and also chk the similar thread
content conversion
plsz check the blog
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
check this like below,
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
hope this helps,
kvr
Message was edited by:
PrasadBabu Koribilli -
File content conversion using SOAP adapter
Hi,
I'm using a receiver SOAP adapter in my IDOC to file scenario and need to do file content conversion in the receiver side.
Are any standard modules available for file content conversion in the SOAP adapter or do I need to write custom EJB modules for this.
Please note that I have to use a SOAP adapter, can't use any other adapter.
Thanks in advance
ShiladityaHi,
XML Document Conversion Type
● Enter recordTypes as the parameter name.
Under Parameter Value, enter the complete, comma-separated list of all names of recordset types that occur in the document to be converted.
If you decide to use this method, you can define a different conversion type for each recordset type that occurs in the XML document.
For example, you could name the recordset types as follows: RecordType1,RecordType2,RecordType3.
● Enter singleRecordType as the parameter name.
Under Parameter Value, enter the name of a recordset type that is to be used to convert all elements that occur in the XML document.
If you decide to use this method, define the same conversion type for each recordset type that occurs in the XML document.
You must enter exactly one parameter only. Whichever parameter you choose, you automatically exclude the second parameter.
You define further parameters for each recordset type.
In the remainder of this documentation the parameters are specified by the prefix <RecordType>. In your configuration, replace this name with the name of the recordset type.
Conversion Type List with Separators
● <RecordType>.fieldSeparator
Enter the field separator that is written between the individual fields of a record.
This specification is mandatory.
Conversion Type List with Fixed Field Length
● <RecordType>.fieldLengths
Specify a character string that contains a list of fixed field lengths that are separated by commas and which determines the number and the length of fields generated in the text file.
For example, you want to write a recordset with three elements that have field widths of five, ten, and fifteen characters. Enter:
<RecordType>.fieldLengths = 5,10,15
This specification is mandatory.
● <RecordType>.fieldLengthExceeded
Specify how you want to handle fields that exceed the configured field length. Permitted values for the parameter value are:
○ error (default)
Interrupts processing of message with error
○ cut
Cuts off superfluous characters
○ ignore
Ignores the field length restriction
Further Entries
● <RecordType>.beginSeparator
Enter a string. The string is placed in front of the first field of a recordset.
● <RecordType>.endSeparator
Enter a string. The string is appended to the last field of a recordset as a concluding character. The default is \r\n.
● contentType
Enter the MIME type of the converted payload. The default value is text/plain.
● addHeaderLine
Only define this parameter if you have already defined singleRecordType.
Define whether a header line is to be added to the result of the conversion.
○ none (default)
Does not insert a header line
○ fromXML
The header line is generated from the element name of the first recordset of the XML document
○ fromConfiguration
The header line is determined by the configuration parameter headerLine.
● headerLine
Only define this parameter if you have already set addHeaderLine=fromConfiguration.
The value that you define is placed in front of the result of the conversion as a header line.
● fixedLineWidth
Enter the maximum line length n (in characters) that can be written to the resulting document. The separator specified by lineSeparator is inserted in the resulting document every n characters.
● lineSeparator
Only define this parameter if you have already defined fixedLineWidth.
Specify the string that is written to the resulting document at the end of each line that is written with fixedLineWidth. The default is \r\n.
Use of Special Characters
You can use special characters in the following parameters: <RecordType>.fieldSeparator, <RecordType>.beginSeparator, <RecordType>.endSeparator, headerLine, and lineSeparator.
● Tabulator: \t
● Carriage Return (CR): \r
● Line Feed (LF): \n
● Arbitrary character: \x<code>
<code>indicates the hexadecimal character code of the character to be displayed.
Regards,
Phani -
When should message protocol be FILE CONTENT CONVERSION
HI one and all,
What doubt keeps haunting me is when should message protocol be selected FILE CONTENT CONVERSION.
for what format of sender information IS THIS USED ?
Ur answer is awaited.
Thanking you,
Ranjith.Ranjith,
Consider the below cases u are sending XML file as
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Test_MT xmlns:ns0="urn:test">
<EmpProfile_Msg>
<Empno>1001</Empno>
<EmpName>J</EmpName>
<DepartmentName>SAP</DepartmentName>
</EmpProfile_Msg>
</ns0:Test_MT>
But while writing the output u need the file as
1000 , J, SAP
Then u have to go for File Content Conversion at the Receiver adapter.
Similarly ,consider the other way around u are sending the file input as
1000 , J, SAP and u want XML , then u have to do FCC in sender adapter.
Hope it clears!!!
Best regards,
raj. -
File is not creating on the Receiver for File Content Conversion
Hi,
i have created a scenario with this blog
/people/shabarish.vijayakumar/blog/2006/02/27/content-conversion-the-key-field-problem
for sender side i am using File Content Conversion to read .txt file and on receiver side i need xml file i have done that.
when i placed the file in the sender folder it gets picked up and i checked in Communication Channel monitporing in Runtime WorkBench it is processed Successfully. but no XML File is created on the Receiver side. i am unable to see the messages on SXMB_MONI also.
Please suggest some ideas to solve this.
Thanks,
Giridhar.CHi Giridhar.
unable to see the messages on SXMB_MONI also
If the file got picked and in Communication Channel monitoring RWB you can see that it is processed without any errors ,, then i feel it should come in come.Please check the Audit log in RWB, there you can see the error message if any.
Please check the connection parameters in FTP and make sure that the same sender folder is
not being used by any other scenario.If you have done any recent changes then do a cache refresh .
Please post if you see any error in content conversion.
Regards
Srinivas
Maybe you are looking for
-
Urgent help - MUSE email form not working - PLEASE HELP
HI to all!! I'm having a big issue here with Adobe Muse cc 7.0 I have my personal domain www.shepherdtextiles.com and third party host (here in China which is 72e.net (and yes, got all php and so on requirements Adobe Muse needs) I follow carefully a
-
Can send but not receive mail in outlook 2013
I just started to have the same issue. I have multiple PC's all running outlook 2013 and one of them just stopped receiving mail. The others work fine, and yeah I check that it is set to receive mail in the options, along with many other typical task
-
Sky Sports app throgh AV Cable
Is it possible to play streams from the Sky Mobile TV App through an AV cable? If so, which cable would be recommended for a high quality picture (would be playing through a 42' LCD Samsung) Thanks.
-
Open URL; constraining window that opens
Here is my challenge: I want to link to another project and have that project open in a new window. Is there a way within Captivate 3 that allows me to constrain those features in the new window that is going to open? In non-Captivate instances, when
-
"Lightroom-type" image editing in Premiere?
Hi! I use Adobe Lightroom a LOT and I absolutely LOVE the way you can edit the image in the Develop Module. I was wondering if there is any plugin out there that allows you to edit clips in Premiere the way you would in Lightroom? I think this woul